Route 53 template snippets - AWS CloudFormation
Amazon Route 53 resource record set using hosted zone name or IDUsing RecordSetGroup to set up weighted resource record setsUsing RecordSetGroup to set up an alias resource record setAlias resource record set for a CloudFront distribution

Route 53 template snippets

Amazon Route 53 resource record set using hosted zone name or ID

When you create an Amazon Route 53 resource record set, you must specify the hosted zone where you want to add it. CloudFormation provides two ways to specify a hosted zone:

  • You can explicitly specify the hosted zone using the HostedZoneId property.

  • You can have CloudFormation find the hosted zone using the HostedZoneName property. If you use the HostedZoneName property and there are multiple hosted zones with the same name, CloudFormation doesn't create the stack.

Adding RecordSet using HostedZoneId

This example adds an Amazon Route 53 resource record set containing an SPF record for the domain name mysite.example.com that uses the HostedZoneId property to specify the hosted zone.

JSON

"myDNSRecord" : {
  "Type" : "AWS::Route53::RecordSet",
  "Properties" : 
  {
    "HostedZoneId" : "Z3DG6IL3SJCGPX",
    "Name" : "mysite.example.com.",
    "Type" : "SPF",
    "TTL" : "900",
    "ResourceRecords" : [ "\"v=spf1 ip4:192.168.0.1/16 -all\"" ]
  }
}

YAML

myDNSRecord:
  Type: AWS::Route53::RecordSet
  Properties:
    HostedZoneId: Z3DG6IL3SJCGPX
    Name: mysite.example.com.
    Type: SPF
    TTL: '900'
    ResourceRecords:
    - '"v=spf1 ip4:192.168.0.1/16 -all"'

Adding RecordSet using HostedZoneName

This example adds an Amazon Route 53 resource record set for the domain name "mysite.example.com" using the HostedZoneName property to specify the hosted zone.

JSON

"myDNSRecord2" : {
            "Type" : "AWS::Route53::RecordSet",
            "Properties" : {
                "HostedZoneName" : "example.com.",
                "Name" : "mysite.example.com.",
                "Type" : "A",
                "TTL" : "900",
                "ResourceRecords" : [
                    "192.168.0.1",
                    "192.168.0.2"
                ]
            }
        }

YAML

myDNSRecord2:
  Type: AWS::Route53::RecordSet
  Properties:
    HostedZoneName: example.com.
    Name: mysite.example.com.
    Type: A
    TTL: '900'
    ResourceRecords:
    - 192.168.0.1
    - 192.168.0.2

Using RecordSetGroup to set up weighted resource record sets

This example uses an AWS::Route53::RecordSetGroup to set up two CNAME records for the "example.com." hosted zone. The RecordSets property contains the CNAME record sets for the "mysite.example.com" DNS name. Each record set contains an identifier (SetIdentifier) and weight (Weight). The proportion of internet traffic that's routed to the resources is based on the following calculations:

  • Frontend One: 140/(140+60) = 140/200 = 70%

  • Frontend Two: 60/(140+60) = 60/200 = 30%

For more information about weighted resource record sets, see Weighted routing in the Amazon Route 53 Developer Guide.

JSON

        "myDNSOne" : {
            "Type" : "AWS::Route53::RecordSetGroup",
            "Properties" : {
                "HostedZoneName" : "example.com.",
                "Comment" : "Weighted RR for my frontends.",
                "RecordSets" : [
                  {
                    "Name" : "mysite.example.com.",
                    "Type" : "CNAME",
                    "TTL" : "900",
                    "SetIdentifier" : "Frontend One",
                    "Weight" : "140",
                    "ResourceRecords" : ["example-ec2.amazonaws.com"]
                  },
                  {
                    "Name" : "mysite.example.com.",
                    "Type" : "CNAME",
                    "TTL" : "900",
                    "SetIdentifier" : "Frontend Two",
                    "Weight" : "60",
                    "ResourceRecords" : ["example-ec2-larger.amazonaws.com"]
                  }
                  ]
            }
        }

YAML

myDNSOne:
  Type: AWS::Route53::RecordSetGroup
  Properties:
    HostedZoneName: example.com.
    Comment: Weighted RR for my frontends.
    RecordSets:
    - Name: mysite.example.com.
      Type: CNAME
      TTL: '900'
      SetIdentifier: Frontend One
      Weight: '140'
      ResourceRecords:
      - example-ec2.amazonaws.com
    - Name: mysite.example.com.
      Type: CNAME
      TTL: '900'
      SetIdentifier: Frontend Two
      Weight: '60'
      ResourceRecords:
      - example-ec2-larger.amazonaws.com

Using RecordSetGroup to set up an alias resource record set

The following examples use an AWS::Route53::RecordSetGroup to set up an alias resource record set named example.com that routes traffic to an ELB Version 1 (Classic) load balancer and a Version 2 (Application or Network) load balancer. The AliasTarget property specifies the hosted zone ID and DNS name for the myELB LoadBalancer by using the GetAtt intrinsic function. GetAtt retrieves different properties of myELB resource, depending on whether you're routing traffic to a Version 1 or Version 2 load balancer:

  • Version 1 load balancer: CanonicalHostedZoneNameID and DNSName

  • Version 2 load balancer: CanonicalHostedZoneID and DNSName

For more information about alias resource record sets, see Choosing between alias and non-alias records in the Route 53 Developer Guide.

JSON for version 1 load balancer

      "myELB" : {
        "Type" : "AWS::ElasticLoadBalancing::LoadBalancer",
        "Properties" : {
            "AvailabilityZones" : [ "us-east-1a" ],
            "Listeners" : [ {
                "LoadBalancerPort" : "80",
                "InstancePort" : "80",
                "Protocol" : "HTTP"
            } ]
        }
      },
      "myDNS" : {
        "Type" : "AWS::Route53::RecordSetGroup",
        "Properties" : {
          "HostedZoneName" : "example.com.",
          "Comment" : "Zone apex alias targeted to myELB LoadBalancer.",
          "RecordSets" : [
            {
              "Name" : "example.com.",
              "Type" : "A",
              "AliasTarget" : {
                  "HostedZoneId" : { "Fn::GetAtt" : ["myELB", "CanonicalHostedZoneNameID"] },
                  "DNSName" : { "Fn::GetAtt" : ["myELB","DNSName"] }
              }
            }
          ]
        }
    }

YAML for version 1 load balancer

myELB:
  Type: AWS::ElasticLoadBalancing::LoadBalancer
  Properties:
    AvailabilityZones:
    - "us-east-1a"
    Listeners:
    - LoadBalancerPort: '80'
      InstancePort: '80'
      Protocol: HTTP
myDNS:
  Type: AWS::Route53::RecordSetGroup
  Properties:
    HostedZoneName: example.com.
    Comment: Zone apex alias targeted to myELB LoadBalancer.
    RecordSets:
    - Name: example.com.
      Type: A
      AliasTarget:
        HostedZoneId: !GetAtt 'myELB.CanonicalHostedZoneNameID'
        DNSName: !GetAtt 'myELB.DNSName'

JSON for version 2 load balancer

      "myELB" : {
        "Type" : "AWS::ElasticLoadBalancing::LoadBalancer",
        "Properties" : {
            "Subnets" : [ 
                {"Ref": "SubnetAZ1"}, 
                {"Ref" : "SubnetAZ2"}
            ]
        }
      },
      "myDNS" : {
        "Type" : "AWS::Route53::RecordSetGroup",
        "Properties" : {
          "HostedZoneName" : "example.com.",
          "Comment" : "Zone apex alias targeted to myELB LoadBalancer.",
          "RecordSets" : [
            {
              "Name" : "example.com.",
              "Type" : "A",
              "AliasTarget" : {
                  "HostedZoneId" : { "Fn::GetAtt" : ["myELB", "CanonicalHostedZoneID"] },
                  "DNSName" : { "Fn::GetAtt" : ["myELB","DNSName"] }
              }
            }
          ]
        }
    }

YAML for version 2 load balancer

myELB:
  Type: AWS::ElasticLoadBalancingV2::LoadBalancer
  Properties:
    Subnets:
    - Ref: SubnetAZ1
    - Ref: SubnetAZ2
myDNS:
  Type: AWS::Route53::RecordSetGroup
  Properties:
    HostedZoneName: example.com.
    Comment: Zone apex alias targeted to myELB LoadBalancer.
    RecordSets:
    - Name: example.com.
      Type: A
      AliasTarget:
        HostedZoneId: !GetAtt 'myELB.CanonicalHostedZoneID'
        DNSName: !GetAtt 'myELB.DNSName'

Alias resource record set for a CloudFront distribution

The following example creates an alias record set that routes queries to the specified CloudFront distribution.

Note

When you create alias resource record sets, you must specify Z2FDTNDATAQYW2 for the HostedZoneId property, as shown in the following example. Alias resource record sets for CloudFront can't be created in a private zone.

JSON

{
    "myDNS": {
        "Type": "AWS::Route53::RecordSetGroup",
        "Properties": {
            "HostedZoneId": {
                "Ref": "myHostedZoneID"
            },
            "RecordSets": [
                {
                    "Name": {
                        "Ref": "myRecordSetDomainName"
                    },
                    "Type": "A",
                    "AliasTarget": {
                        "HostedZoneId": "Z2FDTNDATAQYW2",
                        "DNSName": {
                            "Fn::GetAtt": [
                                "myCloudFrontDistribution",
                                "DomainName"
                            ]
                        }
                    }
                }
            ]
        }
    }
}

YAML

myDNS:
  Type: 'AWS::Route53::RecordSetGroup'
  Properties:
    HostedZoneId: !Ref myHostedZoneID
    RecordSets:
      - Name: !Ref myRecordSetDomainName
        Type: A
        AliasTarget:
          HostedZoneId: Z2FDTNDATAQYW2
          DNSName: !GetAtt 
            - myCloudFrontDistribution
            - DomainName