Connecting to ElastiCache (Valkey) or Amazon ElastiCache (Redis OSS) with in-transit encryption using valkey-cli

To use valkey-cli to connect to a Valkey or Redis OSS cluster enabled with in-transit encryption on Amazon Linux 2023, Amazon Linux 2, or Amazon Linux, follow these steps.

1. Download and compile the valkey-cli utility. This utility is included in the Valkey software distribution.

2. At the command prompt of your EC2 instance, type the appropriate commands for the version of Linux you are using.

   Amazon Linux 2023

   If using Amazon Linux 2023, enter this:

   sudo yum install redis6 -y

   Then type the following command, substituting the endpoint of your cluster and port for what is shown in this example.

   valkey-cli -h Primary or Configuration Endpoint --tls -p 6379

   For more information on finding the endpoint, see Find your Node Endpoints.

   Amazon Linux 2

   If using Amazon Linux 2, enter this:

   sudo yum -y install openssl-devel gcc
   wget https://github.com/valkey-io/valkey/archive/refs/tags/7.2.6.tar.gz
   tar xvzf valkey-7.2.6.tar.gz
   cd valkey-7.2.6
   make distclean
   make valkey-cli BUILD_TLS=yes
   sudo install -m 755 src/valkey-cli/usr/local/bin/

   Amazon Linux

   If using Amazon Linux, enter this:

   sudo yum install gcc jemalloc-devel openssl-devel tcl tcl-devel clang wget
   wget https://github.com/valkey-io/valkey/archive/refs/tags/7.2.6.tar.gz
   tar xvzf valkey-7.2.6.tar.gz
   cd valkey-7.2.6
   make valkey-cli CC=clang BUILD_TLS=yes
   sudo install -m 755 src/valkey-cli /usr/local/bin/

   On Amazon Linux, you may also need to run the following additional steps:

   sudo yum install clang
   CC=clang make
   sudo make install

3. After you have downloaded and installed the valkey-cli utility, it is recommended that you run the optional make-test command.

4. To connect to a cluster with encryption and authentication enabled, enter this command:

   valkey-cli -h Primary or Configuration Endpoint --tls -a 'your-password' -p 6379

   Note

   If you install redis6 on Amazon Linux 2023, you can now use the command redis6-cli instead of valkey-cli:

   redis6-cli -h Primary or Configuration Endpoint --tls -p 6379

To use valkey-cli to connect to a Redis OSS cluster enabled with in-transit encryption using stunnel, follow these steps.

1. Use SSH to connect to your client and install stunnel.

   sudo yum install stunnel

2. Run the following command to create and edit file '/etc/stunnel/valkey-cli.conf' simultaneously to add a ElastiCache (Redis OSS) cluster endpoint to one or more connection parameters, using the provided output below as template.

   vi /etc/stunnel/valkey-cli.conf
   
   				
   fips = no
   setuid = root
   setgid = root
   pid = /var/run/stunnel.pid
   debug = 7 
   delay = yes
   options = NO_SSLv2
   options = NO_SSLv3
   [valkey-cli]
      client = yes
      accept = 127.0.0.1:6379
      connect = primary.ssltest.wif01h.use1.cache.amazonaws.com:6379
   [valkey-cli-replica]
      client = yes
      accept = 127.0.0.1:6380
      connect = ssltest-02.ssltest.wif01h.use1.cache.amazonaws.com:6379

   In this example, the config file has two connections, the valkey-cli and the valkey-cli-replica. The parameters are set as follows:

   • client is set to yes to specify this stunnel instance is a client.

   • accept is set to the client IP. In this example, the primary is set to the Redis OSS default 127.0.0.1 on port 6379. The replica must call a different port and set to 6380. You can use ephemeral ports 1024–65535. For more information, see Ephemeral ports in the Amazon VPC User Guide.

   • connect is set to the Redis OSS server endpoint. For more information, see Finding connection endpoints in ElastiCache.

3. Start stunnel.

   sudo stunnel /etc/stunnel/valkey-cli.conf

   Use the netstat command to confirm that the tunnels started.

   sudo netstat -tulnp | grep -i stunnel
   				
   tcp        0      0 127.0.0.1:6379              0.0.0.0:*                   LISTEN      3189/stunnel        
   tcp        0      0 127.0.0.1:6380              0.0.0.0:*                   LISTEN      3189/stunnel

4. Connect to the encrypted Redis OSS node using the local endpoint of the tunnel.

   • If no AUTH password was used during ElastiCache (Redis OSS) cluster creation, this example uses the valkey-cli to connect to the ElastiCache (Redis OSS) server using complete path for valkey-cli, on Amazon Linux:

     /home/ec2-user/redis-7.2.5/src/valkey-cli -h localhost -p 6379

     If AUTH password was used during Redis OSS cluster creation, this example uses valkey-cli to connect to the Redis OSS server using complete path for valkey-cli, on Amazon Linux:

      /home/ec2-user/redis-7.2.5/src/valkey-cli -h localhost -p 6379 -a my-secret-password

   OR

   • Change directory to redis-7.2.5 and do the following:

     If no AUTH password was used during ElastiCache (Redis OSS) cluster creation, this example uses the valkey-cli to connect to the ElastiCache (Redis OSS) server using complete path for valkey-cli, on Amazon Linux:

     src/valkey-cli -h localhost -p 6379

     If AUTH password was used during Redis OSS cluster creation, this example uses valkey-cli to connect to the Valkey or Redis OSS server using complete path for valkey-cli, on Amazon Linux:

     src/valkey-cli -h localhost -p 6379 -a my-secret-password	

   This example uses Telnet to connect to the Valkey Redis OSS server.

   telnet localhost 6379
   			
   Trying 127.0.0.1...
   Connected to localhost.
   Escape character is '^]'.
   auth MySecretPassword
   +OK
   get foo
   $3
   bar

5. To stop and close the SSL tunnels, pkill the stunnel process.

   sudo pkill stunnel