Using write forwarding in an Aurora PostgreSQL global database

Region and version availability of write forwarding in Aurora PostgreSQL

In Aurora PostgreSQL version 16 and higher major versions, global write forwarding is supported in all minor versions. For earlier Aurora PostgreSQL versions, global write forwarding is supported with version 15.4 and higher minor versions, and version 14.9 and higher minor versions. Write forwarding is available in every AWS Region where Aurora PostgreSQL-based global databases are available.

For more information on version and Region availability of Aurora PostgreSQL global databases, see Aurora global databases with Aurora PostgreSQL.

Enabling write forwarding in Aurora PostgreSQL

By default, write forwarding isn't enabled when you add a secondary cluster to an Aurora global database. You can enable write forwarding for your secondary DB cluster while you're creating it or anytime after you create it. If needed, you can disable it later. Enabling or disabling write forwarding doesn't cause downtime or a reboot.

In the console, you can enable or disable write forwarding when you create or modify a secondary DB cluster.

Enabling or disabling write forwarding when creating a secondary DB cluster

When you create a new secondary DB cluster, you enable write forwarding by selecting the Turn on global write forwarding check box under Read replica write forwarding. Or clear the check box to disable it. To create a secondary DB cluster, follow the instructions for your DB engine in Creating an Amazon Aurora DB cluster.

The following screenshot shows the Read replica write forwarding section with the Turn on global write forwarding check box selected.

Enabling or disabling write forwarding when modifying a secondary DB cluster

In the console, you can modify a secondary DB cluster to enable or disable write forwarding.

To enable or disable write forwarding for a secondary DB cluster by using the console

1. Sign in to the AWS Management Console and open the Amazon RDS console at https://console.aws.amazon.com/rds/.

2. Choose Databases.

3. Choose the secondary DB cluster, and choose Modify.

4. In the Read replica write forwarding section, check or clear the Turn on global write forwarding check box.

5. Choose Continue.

6. For Schedule modifications, choose Apply immediately. If you choose Apply during the next scheduled maintenance window, Aurora ignores this setting and turns on write forwarding immediately.

7. Choose Modify cluster.

To enable write forwarding by using the AWS CLI, use the --enable-global-write-forwarding option. This option works when you create a new secondary cluster using the create-db-cluster command. It also works when you modify an existing secondary cluster using the modify-db-cluster command. It requires that the global database uses an Aurora version that supports write forwarding. You can disable write forwarding by using the --no-enable-global-write-forwarding option with these same CLI commands.

The following procedures describe how to enable or disable write forwarding for a secondary DB cluster in your global cluster by using the AWS CLI.

To enable or disable write forwarding for an existing secondary DB cluster

• Call the modify-db-cluster AWS CLI command and supply the following values:

  • --db-cluster-identifier – The name of the DB cluster.

  • --enable-global-write-forwarding to turn on or --no-enable-global-write-forwarding to turn off.

  The following example enables write forwarding for DB cluster sample-secondary-db-cluster.

  For Linux, macOS, or Unix:

  aws rds modify-db-cluster \
      --db-cluster-identifier sample-secondary-db-cluster \
      --enable-global-write-forwarding

  For Windows:

  aws rds modify-db-cluster ^
      --db-cluster-identifier sample-secondary-db-cluster ^
      --enable-global-write-forwarding

To enable write forwarding using the Amazon RDS API, set the EnableGlobalWriteForwarding parameter to true. This parameter works when you create a new secondary cluster using the CreateDBCluster operation. It also works when you modify an existing secondary cluster using the ModifyDBCluster operation. It requires that the global database uses an Aurora version that supports write forwarding. You can disable write forwarding by setting the EnableGlobalWriteForwarding parameter to false.

Checking if a secondary cluster has write forwarding enabled in Aurora PostgreSQL

To determine whether you can use write forwarding from a secondary cluster, you can check whether the cluster has the attribute "GlobalWriteForwardingStatus": "enabled".

In the AWS Management Console, you see Read replica write forwarding on the Configuration tab of the details page for the cluster. To see the status of the global write forwarding setting for all of your clusters, run the following AWS CLI command.

A secondary cluster shows the value "enabled" or "disabled" to indicate if write forwarding is turned on or off. A value of null indicates that write forwarding isn't available for that cluster. Either the cluster isn't part of a global database, or is the primary cluster instead of a secondary cluster. The value can also be "enabling" or "disabling" if write forwarding is in the process of being turned on or off.

aws rds describe-db-clusters --query '*[].{DBClusterIdentifier:DBClusterIdentifier,GlobalWriteForwardingStatus:GlobalWriteForwardingStatus}'
[
    {
        "GlobalWriteForwardingStatus": "enabled",
        "DBClusterIdentifier": "aurora-write-forwarding-test-replica-1"
    },
    {
        "GlobalWriteForwardingStatus": "disabled",
        "DBClusterIdentifier": "aurora-write-forwarding-test-replica-2"
    },
    {
        "GlobalWriteForwardingStatus": null,
        "DBClusterIdentifier": "non-global-cluster"
    }
]

To find all secondary clusters that have global write forwarding enabled, run the following command. This command also returns the cluster's reader endpoint. You use the secondary cluster's reader endpoint when you use write forwarding from the secondary to the primary in your Aurora global database.

aws rds describe-db-clusters --query 'DBClusters[].{DBClusterIdentifier:DBClusterIdentifier,GlobalWriteForwardingStatus:GlobalWriteForwardingStatus,ReaderEndpoint:ReaderEndpoint} | [?GlobalWriteForwardingStatus == `enabled`]'
[
    {
        "GlobalWriteForwardingStatus": "enabled",
        "ReaderEndpoint": "aurora-write-forwarding-test-replica-1.cluster-ro-cnpexample.us-west-2.rds.amazonaws.com",
        "DBClusterIdentifier": "aurora-write-forwarding-test-replica-1"
    }
]

Application and SQL compatibility with write forwarding in Aurora PostgreSQL

Certain statements aren't allowed or can produce stale results when you use them in a global database with write forwarding. In addition, user defined functions and user defined procedures aren't supported. Thus, the EnableGlobalWriteForwarding setting is turned off by default for secondary clusters. Before turning it on, check to make sure that your application code isn't affected by any of these restrictions.

You can use the following kinds of SQL statements with write forwarding:

The following kinds of SQL statements aren't supported with write forwarding:

Isolation and consistency for write forwarding in Aurora PostgreSQL

In sessions that use write forwarding, you can use the REPEATABLE READ and READ COMMITTED isolation levels. However, the SERIALIZABLE isolation level isn't supported.

You can control the degree of read consistency on a secondary cluster. The read consistency level determines how much waiting the secondary cluster does before each read operation to ensure that some or all changes are replicated from the primary cluster. You can adjust the read consistency level to ensure that all forwarded write operations from your session are visible in the secondary cluster before any subsequent queries. You can also use this setting to ensure that queries on the secondary cluster always see the most current updates from the primary cluster. This is so even for those submitted by other sessions or other clusters. To specify this type of behavior for your application, you choose the appropriate value for the session-level parameter apg_write_forward.consistency_mode. The apg_write_forward.consistency_mode parameter has an effect only on secondary clusters that have write forwarding enabled.

As you increase the consistency level, your application spends more time waiting for changes to be propagated between AWS Regions. You can choose the balance between fast response time and ensuring that changes made in other locations are fully available before your queries run.

With each available consistency mode setting, the effect is as follows:

For more information about all the parameters involved with write forwarding, see Configuration parameters for write forwarding in Aurora PostgreSQL.

Transaction access modes with write forwarding

If the transaction access mode is set to read only, write forwarding isn't used. You can set the access mode to read write only while you’re connected to a DB cluster and session that has write forwarding enabled.

For more information on the transaction access modes, see SET TRANSACTION.

Running multipart statements with write forwarding in Aurora PostgreSQL

A DML statement might consist of multiple parts, such as a INSERT ... SELECT statement or a DELETE ... WHERE statement. In this case, the entire statement is forwarded to the primary cluster and run there.

Configuration parameters for write forwarding in Aurora PostgreSQL

The Aurora cluster parameter groups include settings for the write forwarding feature. Because these are cluster parameters, all DB instances in each cluster have the same values for these variables. Details about these parameters are summarized in the following table, with usage notes after the table.

The apg_write_forward.max_forwarding_connections_percent parameter is the upper limit on database connection slots that can be used to handle queries forwarded from readers. It is expressed as a percentage of the max_connections setting for the writer DB instance in the primary cluster. For example, if max_connections is 800 and apg_write_forward.max_forwarding_connections_percent is 10, then the writer allows a maximum of 80 simultaneous forwarded sessions. These connections come from the same connection pool managed by the max_connections setting. This setting applies only on the primary cluster when at least one secondary clusters has write forwarding enabled.

Use the following settings on the secondary cluster:

Amazon CloudWatch metrics for write forwarding in Aurora PostgreSQL

The following Amazon CloudWatch metrics apply to the primary cluster when you use write forwarding on one or more secondary clusters. These metrics are all measured on the writer DB instance in the primary cluster.

The following CloudWatch metrics apply to each secondary cluster. These metrics are measured on each reader DB instance in a secondary cluster with write forwarding enabled.

Wait events for write forwarding in Aurora PostgreSQL

Amazon Aurora generates the following wait events when you use write forwarding with Aurora PostgreSQL.

IPC:AuroraWriteForwardConnect

The IPC:AuroraWriteForwardConnect event occurs when a backend process on the secondary DB cluster is waiting for a connection to the writer node of the primary DB cluster to be opened.

Likely causes of increased waits

This event increases as the number of connection attempts from a secondary Region's reader node to the writer node of the primary DB cluster increases.

Actions

Reduce the number of simultaneous connections from a secondary node to the primary Region's writer node.

IPC:AuroraWriteForwardConsistencyPoint

The IPC:AuroraWriteForwardConsistencyPoint event describes how long a query from a node on the secondary DB cluster will wait for the results of forwarded write operations to be replicated to the current Region. This event is only generated if the session-level parameter apg_write_forward.consistency_mode is set to one of the following:

For more information about the apg_write_forward.consistency_mode parameter settings, see Configuration parameters for write forwarding in Aurora PostgreSQL.

Likely causes of increased waits

Common causes for longer wait times include the following:

Actions

Change your consistency mode, depending on your application's requirements.

IPC:AuroraWriteForwardExecute

The IPC:AuroraWriteForwardExecute event occurs when a backend process on the secondary DB cluster is waiting for a forwarded query to complete and obtain results from the writer node of the primary DB cluster.

Likely causes of increased waits

Common causes for increased waits include the following:

Actions

We recommend different actions depending on the causes of your wait event.

IPC:AuroraWriteForwardGetGlobalConsistencyPoint

The IPC:AuroraWriteForwardGetGlobalConsistencyPoint event occurs when a backend process on the secondary DB cluster that's using the GLOBAL consistency mode is waiting to obtain the global consistency point from the writer node before executing a query.

Likely causes of increased waits

Common causes for increased waits include the following:

Actions

We recommend different actions depending on the causes of your wait event.

IPC:AuroraWriteForwardXactAbort

The IPC:AuroraWriteForwardXactAbort event occurs when a backend process on the secondary DB cluster is waiting for the result of a remote cleanup query. Cleanup queries are issued to return the process to the appropriate state after a write-forwarded transaction is aborted. Amazon Aurora performs them either because an error was found or because an user issued an explicit ABORT command or cancelled a running query.

Likely causes of increased waits

Common causes for increased waits include the following:

Actions

We recommend different actions depending on the causes of your wait event.

IPC:AuroraWriteForwardXactCommit

The IPC:AuroraWriteForwardXactCommit event occurs when a backend process on the secondary DB cluster is waiting for the result of a forwarded commit transaction command.

Likely causes of increased waits

Common causes for increased waits include the following:

Actions

If the secondary node or primary Region's writer node is constrained by CPU or network bandwidth, consider changing it to an instance type with more CPU capacity or more network bandwidth.

IPC:AuroraWriteForwardXactStart

The IPC:AuroraWriteForwardXactStart event occurs when a backend process on the secondary DB cluster is waiting for the result of a forwarded start transaction command.

Likely causes of increased waits

Common causes for increased waits include the following:

Actions

If the secondary node or primary Region's writer node is constrained by CPU or network bandwidth, consider changing it to an instance type with more CPU capacity or more network bandwidth.