Modifying RDS Proxy

You can change specific settings associated with a proxy after you create the proxy. You do so by modifying the proxy itself, its associated target group, or both. Each proxy has an associated target group.

Important

The values in the Client authentication type and IAM authentication fields apply to all Secrets Manager secrets that are associated with this proxy. To specify different values for each secret, modify your proxy by using the AWS CLI or the API instead.

To modify the settings for a proxy

Sign in to the AWS Management Console and open the Amazon RDS console at https://console.aws.amazon.com/rds/.
In the navigation pane, choose Proxies.
In the list of proxies, choose the proxy whose settings you want to modify or go to its details page.
For Actions, choose Modify.
Enter or choose the properties to modify. You can modify the following:
- Proxy identifier – Rename the proxy by entering a new identifier.
- Idle client connection timeout – Enter a time period for the idle client connection timeout.
- IAM role – Change the IAM role used to retrieve the secrets from Secrets Manager.
- Secrets Manager secrets – Add or remove Secrets Manager secrets. These secrets correspond to database user names and passwords.
- Client authentication type – (PostgreSQL only) Change the type of authentication for client connections to the proxy.
- IAM authentication – Require or disallow IAM authentication for connections to the proxy.
- Require Transport Layer Security – Turn the requirement for Transport layer Security (TLS) on or off.
- VPC security group – Add or remove VPC security groups for the proxy to use.
- Enable enhanced logging – Enable or disable enhanced logging.
Choose Modify.

If you didn't find the settings listed that you want to change, use the following procedure to update the target group for the proxy. The target group associated with a proxy controls the settings related to the physical database connections. Each proxy has one associated target group named default, which is created automatically along with the proxy.

You can only modify the target group from the proxy details page, not from the list on the Proxies page.

To modify the settings for a proxy target group

On the Proxies page, go to the details page for a proxy.
For Target groups, choose the default link. Currently, all proxies have a single target group named default.
On the details page for the default target group, choose Modify.
Choose new settings for the properties that you can modify:
- Database – Choose a different Aurora cluster.
- Connection pool maximum connections – Adjust what percentage of the maximum available connections the proxy can use.
- Session pinning filters – (Optional) Choose a session pinning filter. This circumvents the default safety measures for multiplexing database connections across client connections. Currently, the setting isn't supported for PostgreSQL. The only choice is EXCLUDE_VARIABLE_SETS.
  
  Enabling this setting can cause session variables of one connection to impact other connections. This can cause errors or correctness issues if your queries depend on session variable values set outside of the current transaction. Consider using this option after verifying it is safe for your applications to share database connections across client connections.
  
  The following patterns can be considered safe:
  - SET statements where there is no change to the effective session variable value, i.e., there is no change to the session variable.
  - You change the session variable value and execute a statement in the same transaction.
  For more information, see Avoiding pinning an RDS Proxy.
- Connection borrow timeout – Adjust the connection borrow timeout interval. This setting applies when the maximum number of connections is already being used for the proxy. The setting determines how long the proxy waits for a connection to become available before returning a timeout error.
- Initialization query. (Optional) Add an initialization query, or modify the current one. You can specify one or more SQL statements for the proxy to run when opening each new database connection. The setting is typically used with SET statements to make sure that each connection has identical settings. Make sure that the query you add is valid. To include multiple variables in a single SET statement, use comma separators. For example:
```
SET variable1=value1, variable2=value2
```
  For multiple statements, use semicolons as the separator.
You can't change certain properties, such as the target group identifier and the database engine.
Choose Modify target group.

To modify a proxy using the AWS CLI, use the commands modify-db-proxy, modify-db-proxy-target-group, deregister-db-proxy-targets, and register-db-proxy-targets.

With the modify-db-proxy command, you can change properties such as the following:

The set of Secrets Manager secrets used by the proxy.
Whether TLS is required.
The idle client timeout.
Whether to log additional information from SQL statements for debugging.
The IAM role used to retrieve Secrets Manager secrets.
The security groups used by the proxy.

The following example shows how to rename an existing proxy.


aws rds modify-db-proxy --db-proxy-name the-proxy --new-db-proxy-name the_new_name

To modify connection-related settings or rename the target group, use the modify-db-proxy-target-group command. Currently, all proxies have a single target group named default. When working with this target group, you specify the name of the proxy and default for the name of the target group.

The following example shows how to first check the MaxIdleConnectionsPercent setting for a proxy and then change it, using the target group.


aws rds describe-db-proxy-target-groups --db-proxy-name the-proxy

{
    "TargetGroups": [
        {
            "Status": "available",
            "UpdatedDate": "2019-11-30T16:49:30.342Z",
            "ConnectionPoolConfig": {
                "MaxIdleConnectionsPercent": 50,
                "ConnectionBorrowTimeout": 120,
                "MaxConnectionsPercent": 100,
                "SessionPinningFilters": []
            },
            "TargetGroupName": "default",
            "CreatedDate": "2019-11-30T16:49:27.940Z",
            "DBProxyName": "the-proxy",
            "IsDefault": true
        }
    ]
}

aws rds modify-db-proxy-target-group --db-proxy-name the-proxy --target-group-name default --connection-pool-config '
{ "MaxIdleConnectionsPercent": 75 }'

{
    "DBProxyTargetGroup": {
        "Status": "available",
        "UpdatedDate": "2019-12-02T04:09:50.420Z",
        "ConnectionPoolConfig": {
            "MaxIdleConnectionsPercent": 75,
            "ConnectionBorrowTimeout": 120,
            "MaxConnectionsPercent": 100,
            "SessionPinningFilters": []
        },
        "TargetGroupName": "default",
        "CreatedDate": "2019-11-30T16:49:27.940Z",
        "DBProxyName": "the-proxy",
        "IsDefault": true
    }
}

With the deregister-db-proxy-targets and register-db-proxy-targets commands, you change which Aurora DB clusters the proxy is associated with through its target group. Currently, each proxy can connect to one Aurora DB cluster. The target group tracks the connection details for all the all the DB instances in an Aurora cluster.

The following example starts with a proxy that is associated with an Aurora MySQL cluster named cluster-56-2020-02-25-1399. The example shows how to change the proxy so that it can connect to a different cluster named provisioned-cluster.

When you work with an Aurora DB cluster, you specify the --db-cluster-identifier option.

The following example modifies an Aurora MySQL proxy. An Aurora PostgreSQL proxy has port 5432.


aws rds describe-db-proxy-targets --db-proxy-name the-proxy

{
    "Targets": [
        {
            "Endpoint": "instance-9814.demo.us-east-1.rds.amazonaws.com",
            "Type": "RDS_INSTANCE",
            "Port": 3306,
            "RdsResourceId": "instance-9814"
        },
        {
            "Endpoint": "instance-8898.demo.us-east-1.rds.amazonaws.com",
            "Type": "RDS_INSTANCE",
            "Port": 3306,
            "RdsResourceId": "instance-8898"
        },
        {
            "Endpoint": "instance-1018.demo.us-east-1.rds.amazonaws.com",
            "Type": "RDS_INSTANCE",
            "Port": 3306,
            "RdsResourceId": "instance-1018"
        },
        {
            "Type": "TRACKED_CLUSTER",
            "Port": 0,
            "RdsResourceId": "cluster-56-2020-02-25-1399"
        },
        {
            "Endpoint": "instance-4330.demo.us-east-1.rds.amazonaws.com",
            "Type": "RDS_INSTANCE",
            "Port": 3306,
            "RdsResourceId": "instance-4330"
        }
    ]
}

aws rds deregister-db-proxy-targets --db-proxy-name the-proxy --db-cluster-identifier cluster-56-2020-02-25-1399

aws rds describe-db-proxy-targets --db-proxy-name the-proxy

{
    "Targets": []
}

aws rds register-db-proxy-targets --db-proxy-name the-proxy --db-cluster-identifier provisioned-cluster

{
    "DBProxyTargets": [
        {
            "Type": "TRACKED_CLUSTER",
            "Port": 0,
            "RdsResourceId": "provisioned-cluster"
        },
        {
            "Endpoint": "gkldje.demo.us-east-1.rds.amazonaws.com",
            "Type": "RDS_INSTANCE",
            "Port": 3306,
            "RdsResourceId": "gkldje"
        },
        {
            "Endpoint": "provisioned-1.demo.us-east-1.rds.amazonaws.com",
            "Type": "RDS_INSTANCE",
            "Port": 3306,
            "RdsResourceId": "provisioned-1"
        }
    ]
}

To modify a proxy using the RDS API, you use the operations ModifyDBProxy, ModifyDBProxyTargetGroup, DeregisterDBProxyTargets, and RegisterDBProxyTargets operations.

With ModifyDBProxy, you can change properties such as the following:

The set of Secrets Manager secrets used by the proxy.
Whether TLS is required.
The idle client timeout.
Whether to log additional information from SQL statements for debugging.
The IAM role used to retrieve Secrets Manager secrets.
The security groups used by the proxy.

With ModifyDBProxyTargetGroup, you can modify connection-related settings or rename the target group. Currently, all proxies have a single target group named default. When working with this target group, you specify the name of the proxy and default for the name of the target group.

With DeregisterDBProxyTargets and RegisterDBProxyTargets, you change which Aurora cluster the proxy is associated with through its target group. Currently, each proxy can connect to one Aurora cluster. The target group tracks the connection details for the DB instances in an Aurora cluster.

Warning Javascript is disabled or is unavailable in your browser.

To use the Amazon Web Services Documentation, Javascript must be enabled. Please refer to your browser's Help pages for instructions.

Document Conventions

Managing an RDS Proxy

Adding a database user