Amazon Monitron is no longer open to new customers. Existing customers can continue to use the service as normal. For capabilities similar to Amazon Monitron, see our [blog post](https://aws.amazon.com/blogs/machine-learning/maintain-access-and-consider-alternatives-for-amazon-monitron). # Securing your network In order to allow your Amazon Monitron gateways to send data back to AWS, you should allow the following with regard to your local network traffic: + Protocol UDP, port 53 - standard DNS port + Protocol UDP, ports 67 and 68 - standard DHCP ports + TCP ports 443 and 8883 + For Amazon Monitron gateways commissioned before 19th January, 2024: + Domains ending in `*.amazonaws.com` + For Amazon Monitron gateways commissioned after 19th January, 2024: + Asia Pacific (Sydney) (ap-southeast-2) – 54.79.215.104 and 54.79.23.89 + Europe (Ireland) (eu-west-1) – 54.72.131.46, 34.251.27.192, and 52.213.71.97 + US East (N. Virginia) (us-east-1) – 3.215.69.205, 52.86.131.66, and 18.210.44.199 **Note** There's no regression with new static IPs being enabled by default for previously commissioned devices as they have already been allow listed for IP domains ending in `*.amazonaws.com` (which already includes the new static IP domain of `amazonaws.com`). Decommissioning and recomissioning a gateway will switch it to static IP. You can't revert a gateway network configuration from a static IP to a dynamic IP. If you are using an** Android mobile device** to provision your gateways and sensors, then you should allow the following with regard to your local network traffic: + TCP ports 443, 5228, 5229, and 5230 + Domains ending in `*.google.com`, `*.googleapis.com` + Any ports required by your telecom provider + TCP port 5094 for SSL communications used on ** *Vodafone devices* ** If you are using an** Apple mobile device** to provision your gateways and sensors, then you should allow the following with regard to your local network traffic: + TCP ports 443, 2197, and 5223 + Subnets 17.249.0.0/16, 17.252.0.0/16, 17.57.144.0/22, 17.188.128.0/18, and 17.188.20.0/23 + See also: [ Apple’s list of required ports and hosts ](https://support.apple.com/en-us/HT203609) Note: Amazon Monitron, Android, and Apple do not (per their respective documentation) require the following ports to be open: + UDP port 443 + TCP port 80