UpdateResolverEndpoint - Amazon Route 53

UpdateResolverEndpoint

Updates the name, or endpoint type for an inbound or an outbound Resolver endpoint. You can only update between IPV4 and DUALSTACK, IPV6 endpoint type can't be updated to other type.

Request Syntax

{ "Name": "string", "Protocols": [ "string" ], "ResolverEndpointId": "string", "ResolverEndpointType": "string", "UpdateIpAddresses": [ { "IpId": "string", "Ipv6": "string" } ] }

Request Parameters

For information about the parameters that are common to all actions, see Common Parameters.

The request accepts the following data in JSON format.

Name

The name of the Resolver endpoint that you want to update.

Type: String

Length Constraints: Maximum length of 64.

Pattern: (?!^[0-9]+$)([a-zA-Z0-9\-_' ']+)

Required: No

Protocols

The protocols you want to use for the endpoint. DoH-FIPS is applicable for inbound endpoints only.

For an inbound endpoint you can apply the protocols as follows:

  • Do53 and DoH in combination.

  • Do53 and DoH-FIPS in combination.

  • Do53 alone.

  • DoH alone.

  • DoH-FIPS alone.

  • None, which is treated as Do53.

For an outbound endpoint you can apply the protocols as follows:

  • Do53 and DoH in combination.

  • Do53 alone.

  • DoH alone.

  • None, which is treated as Do53.

Important

You can't change the protocol of an inbound endpoint directly from only Do53 to only DoH, or DoH-FIPS. This is to prevent a sudden disruption to incoming traffic that relies on Do53. To change the protocol from Do53 to DoH, or DoH-FIPS, you must first enable both Do53 and DoH, or Do53 and DoH-FIPS, to make sure that all incoming traffic has transferred to using the DoH protocol, or DoH-FIPS, and then remove the Do53.

Type: Array of strings

Array Members: Minimum number of 1 item. Maximum number of 2 items.

Valid Values: DoH | Do53 | DoH-FIPS

Required: No

ResolverEndpointId

The ID of the Resolver endpoint that you want to update.

Type: String

Length Constraints: Minimum length of 1. Maximum length of 64.

Required: Yes

ResolverEndpointType

Specifies the endpoint type for what type of IP address the endpoint uses to forward DNS queries.

Updating to IPV6 type isn't currently supported.

Type: String

Valid Values: IPV6 | IPV4 | DUALSTACK

Required: No

UpdateIpAddresses

Specifies the IPv6 address when you update the Resolver endpoint from IPv4 to dual-stack. If you don't specify an IPv6 address, one will be automatically chosen from your subnet.

Type: Array of UpdateIpAddress objects

Array Members: Minimum number of 0 items. Maximum number of 50 items.

Required: No

Response Syntax

{ "ResolverEndpoint": { "Arn": "string", "CreationTime": "string", "CreatorRequestId": "string", "Direction": "string", "HostVPCId": "string", "Id": "string", "IpAddressCount": number, "ModificationTime": "string", "Name": "string", "OutpostArn": "string", "PreferredInstanceType": "string", "Protocols": [ "string" ], "ResolverEndpointType": "string", "SecurityGroupIds": [ "string" ], "Status": "string", "StatusMessage": "string" } }

Response Elements

If the action is successful, the service sends back an HTTP 200 response.

The following data is returned in JSON format by the service.

ResolverEndpoint

The response to an UpdateResolverEndpoint request.

Type: ResolverEndpoint object

Errors

For information about the errors that are common to all actions, see Common Errors.

AccessDeniedException

The current account doesn't have the IAM permissions required to perform the specified Resolver operation.

This error can also be thrown when a customer has reached the 5120 character limit for a resource policy for CloudWatch Logs.

HTTP Status Code: 400

InternalServiceErrorException

We encountered an unknown error. Try again in a few minutes.

HTTP Status Code: 400

InvalidParameterException

One or more parameters in this request are not valid.

HTTP Status Code: 400

InvalidRequestException

The request is invalid.

HTTP Status Code: 400

ResourceNotFoundException

The specified resource doesn't exist.

HTTP Status Code: 400

ThrottlingException

The request was throttled. Try again in a few minutes.

HTTP Status Code: 400

Examples

UpdateResolverEndpoint Example

This example illustrates one usage of UpdateResolverEndpoint.

Sample Request

POST / HTTP/1.1 Host: route53resolver.us-east-2.amazonaws.com Accept-Encoding: identity Content-Length: 2 X-Amz-Target: Route53Resolver.UpdateResolverEndpoint X-Amz-Date: 20181101T192600Z User-Agent: aws-cli/1.16.45 Python/2.7.10 Darwin/16.7.0 botocore/1.12.35 Content-Type: application/x-amz-json-1.1 Authorization: AWS4-HMAC-SHA256 Credential=AKIAJJ2SONIPEXAMPLE/20181101/us-east-2/route53resolver/aws4_request, SignedHeaders=content-type;host;x-amz-date;x-amz-target, Signature=[calculated-signature] { "Name":"MyInbound", "ResolverEndpointId": "rslvr-in-60b9fd8fdbexample" }

Sample Response

HTTP/1.1 200 OK Date: Thu, 01 Nov 2018 18:52:22 GMT Content-Type: application/x-amz-json-1.1 Content-Length: 479 x-amzn-RequestId: bda80f7b-0f2c-41d1-9043-f36d3example Connection: keep-alive { "ResolverEndpoint":{ "Arn":"arn:aws:route53resolver:us-east-2:0123456789012:resolver-endpoint/rslvr-in-60b9fd8fdbexample", "CreationTime":"2018-11-01T18:44:50.372Z", "CreatorRequestId":"1234", "Direction":"INBOUND", "HostVPCId":"vpc-03cf94c75cexample", "Id":"rslvr-in-60b9fd8fdbexample", "IpAddressCount":3, "ModificationTime":"2018-11-01T18:44:50.372Z", "Name":"MyInbound", "SecurityGroupIds":[ "sg-020a3554aexample" ], "Status":"UPDATING", "StatusMessage":"Updating the Resolver Endpoint" } }

See Also

For more information about using this API in one of the language-specific AWS SDKs, see the following: