General Troubleshooting

The following are general issues that might occur when you use Amazon AppStream 2.0.

SAML federation is not working. The user is not authorized to view AppStream 2.0 applications.

This might happen because the inline policy that is embedded for the SAML 2.0 federation IAM role does not include permissions to the stack ARN. The IAM role is assumed by the federated user who is accessing an AppStream 2.0 stack. Edit the role permissions to include the stack ARN. For more information, see Amazon AppStream 2.0 Integration with SAML 2.0 and Troubleshooting SAML 2.0 Federation with AWS in the IAM User Guide.

After federating from an ADFS portal, my streaming session doesn't start. I am getting the error "Sorry connection went down".

Set the claim rule's Incoming Claim Type for the NameID SAML attribute to UPN and try the connection again.

I get an invalid redirect URI error.

This error occurs due to a malformed or invalid AppStream 2.0 stack relay state URL. Make sure that the relay state configured in your federation setup is the same as the stack relay state that is displayed in the stack details through the AppStream 2.0 console. If they are the same and the problem still persists, contact AWS Support. For more information, see Amazon AppStream 2.0 Integration with SAML 2.0.

My image builders and fleets never reach the running state. My DNS servers are in a Simple AD directory.

AppStream 2.0 relies on the DNS servers within your VPC to return a non-existent domain (NXDOMAIN) response for local domain names that don’t exist. This enables the AppStream 2.0-managed network interface to communicate with the management servers.

When you create a directory with Simple AD, AWS Directory Service creates two domain controllers that also function as DNS servers on your behalf. Because the domain controllers don't provide the NXDOMAIN response, they can't be used with AppStream 2.0.

I've enabled application settings persistence for my users, but their persistent application settings aren't being saved or loaded.

AppStream 2.0 automatically saves application settings that are created in certain locations on the Windows instance. The settings are saved only if your application saves them to one of these locations. For a list of supported locations, see How Application Settings Persistence Works. If your application is configured to save to C:\Users\%username% and your users' settings for the application aren’t persisting between sessions, the mount point might not be created. This prevents the settings from being saved to the VHD file that contains your users’ persistent application settings.

To resolve this issue, follow these steps:

I've enabled application settings persistence for my users, but for certain streaming applications, my users’ passwords aren’t persisting across sessions.

This issue occurs when:

In cases where a streaming instance is not joined to an Active Directory domain, the Windows user, PhotonUser, is different on each fleet instance. Due to the way in which the DPAPI security model works, users' passwords don’t persist for applications that use DPAPI in this scenario. In cases where streaming instances are joined to an Active Directory domain and the user is a domain user, the Windows user name is that of the logged in user, and users’ passwords persist for applications that use DPAPI.

Google Chrome data is filling the VHD file that contains my users' persistent application settings. This is preventing their settings from persisting. How can I manage the Chrome profile?

By default, Google Chrome stores both user data and the local disk cache in the Windows user profile. To prevent the local disk cache data from filling the VHD file that contains users' persistent application settings, configure Chrome to save only the user data. To do so, on the fleet instance, open the command line as an administrator and start Chrome with the following parameters to change the location of the disk cache:

chrome.exe --disk-cache-dir C:\path-to-unsaved-location\

Running Chrome with these parameters prevents the disk cache from being persisted between AppStream 2.0 sessions.

I set up a custom domain for my embedded AppStream 2.0 streaming sessions, but my AppStream 2.0 streaming URLs aren't redirecting to my custom domain.

To resolve this issue, verify that when you created your AppStream 2.0 streaming URL, you replaced the AppStream 2.0 endpoint with your custom domain. By default, AppStream 2.0 streaming URLs are formatted as follows:

https://appstream2.region.aws.amazon.com/authenticate?parameters=authenticationcode

To replace the default AppStream 2.0 endpoint in your streaming URL, replace https://appstream2.region in the URL with your custom domain. For example, if your custom domain is training.example.com, your new streaming URL must follow this format:

https://training.example.com/authenticate?parameters=authenticationcode

For more information about configuring custom domains for embedded AppStream 2.0 streaming sessions, see Configuration Requirements for Using Custom Domains.

I launched an app on a smartcard-enabled AppStream 2.0 fleet, and there are a limited number of certificates (or none) available to the app for authentication.

This happens when the application is launched before the Certificate Propagation service is in a running state.

To resolve this issue, use the PowerShell module Get-Service to query the Certificate Propagation service’s status, and make sure that it's in a running state before launching your application.

For example, the following script won't launch the application until the Certificate Propagation service is running:

$logFile = "$Env:TEMP\AS2\Logging\$(Get-Date -Format "yyyy-MM-dd-HH-mm-ss")_applaunch.log"
New-Item -path $logfile -ItemType File -Force | Out-Null

Function Write-Log {
    Param ([string]$message)
    $stamp = Get-Date -Format "yyyy/MM/dd HH:mm:ss"
    $logoutput = "$stamp $message"
    Add-content $logfile -value $logoutput
}

if (Get-Service -Name "CertPropSvc" | Where-Object -Property Status -eq Running) {

    Write-Log "The Certificate Propagation Service is running. Launching Application..."
    try {
        Start-Process -FilePath "Path to Application" -WindowStyle Maximized -ErrorAction Stop
    }
    catch {
        Write-Log "There was an error launching the application: $_"
        
    }
    
}   
else {

    do {
        
        $status = Get-Service "CertPropSvc" | select-object -ExpandProperty Status
        Write-Log "The Certificate Propagation service status is currently $status"
        Start-Sleep -Seconds 2

    
    } until (Get-Service -Name "CertPropSvc" | Where-Object -Property Status -eq Running)
    
    write-log "The Certificate Propagation Service is running. Launching Application..."
    try {
        Start-Process -FilePath "Path to Application" -WindowStyle Maximized -ErrorAction Stop
    }
    catch {
        Write-Log "There was an error launching the application: $_"
        
    }
}   

The Certification Propagation service isn't starting on my smartcard-enabled AppStream 2.0 fleet.

If the Certificate Propagation service isn't starting, the service’s startup type might be set to Disabled. To resolve this, on the AppStream 2.0 image builder used to create your fleet’s image, launch the Windows Services Microsoft Management Console, and make sure that the startup type of the Certificate Propagation service isn't set to Disabled.

If the startup type isn't set to Disabled, and the service is still not starting on your AppStream 2.0 fleet, use the PowerShell module Start-Service to start the Certificate Propagation service when your fleet instance starts.

For example, the following PowerShell script will start the service if it detects that it's in a stopped state:

$logFile = "C:\AppStream\Logging\$(Get-Date -Format "yyyy-MM-dd-HH-mm-ss")_certpropcheck.log"
New-Item -path $logfile -ItemType File -Force | Out-Null

Function Write-Log {
    Param ([string]$message)
    $stamp = Get-Date -Format "yyyy/MM/dd HH:mm:ss"
    $logoutput = "$stamp $message"
    Add-content $logfile -value $logoutput
}

if (Get-Service -Name "CertPropSvc" | Where-Object -Property Status -eq Running) {

    Write-Log "The Certificate Propagation Service is running. Exiting..."
    Exit
}
else {
    do {

        if (Get-Service -Name "CertPropSvc" | Where-Object -Property Status -eq Stopped) {

            Write-Log "The Certificate Propagation Service is stopped, attepmting to start..."
            try {
                Start-Service -Name "CertPropSvc" -ErrorAction Stop
                
            }
            catch {
                Write-Log "There was a problem starting the service: $_"
                break               
            }

            $status = Get-Service "CertPropSvc" | select-object -ExpandProperty Status
            Write-Log "The Certificate Propagation service status is currently $status"
            

        }
        else {
        
            $status = Get-Service "CertPropSvc" | select-object -ExpandProperty Status
            Write-Log "The Certificate Propagation service status is currently $status"
            break
        }
    
    } until (Get-Service -Name "CertPropSvc" | Where-Object -Property Status -eq Running)
}