CfnCluster
- class aws_cdk.aws_eks_legacy.CfnCluster(scope, id, *, resources_vpc_config, role_arn, encryption_config=None, kubernetes_network_config=None, logging=None, name=None, outpost_config=None, tags=None, version=None)
Bases:
CfnResourceA CloudFormation
AWS::EKS::Cluster.Creates an Amazon EKS control plane.
The Amazon EKS control plane consists of control plane instances that run the Kubernetes software, such as
etcdand the API server. The control plane runs in an account managed by AWS , and the Kubernetes API is exposed by the Amazon EKS API server endpoint. Each Amazon EKS cluster control plane is single tenant and unique. It runs on its own set of Amazon EC2 instances.The cluster control plane is provisioned across multiple Availability Zones and fronted by an Elastic Load Balancing Network Load Balancer. Amazon EKS also provisions elastic network interfaces in your VPC subnets to provide connectivity from the control plane instances to the nodes (for example, to support
kubectl exec,logs, andproxydata flows).Amazon EKS nodes run in your AWS account and connect to your cluster’s control plane over the Kubernetes API server endpoint and a certificate file that is created for your cluster.
In most cases, it takes several minutes to create a cluster. After you create an Amazon EKS cluster, you must configure your Kubernetes tooling to communicate with the API server and launch nodes into your cluster. For more information, see Managing Cluster Authentication and Launching Amazon EKS nodes in the Amazon EKS User Guide .
- CloudformationResource:
AWS::EKS::Cluster
- Link:
http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-eks-cluster.html
- ExampleMetadata:
fixture=_generated
Example:
# The code below shows an example of how to instantiate this type. # The values are placeholders you should change. import aws_cdk.aws_eks_legacy as eks_legacy cfn_cluster = eks_legacy.CfnCluster(self, "MyCfnCluster", resources_vpc_config=eks_legacy.CfnCluster.ResourcesVpcConfigProperty( subnet_ids=["subnetIds"], # the properties below are optional endpoint_private_access=False, endpoint_public_access=False, public_access_cidrs=["publicAccessCidrs"], security_group_ids=["securityGroupIds"] ), role_arn="roleArn", # the properties below are optional encryption_config=[eks_legacy.CfnCluster.EncryptionConfigProperty( provider=eks_legacy.CfnCluster.ProviderProperty( key_arn="keyArn" ), resources=["resources"] )], kubernetes_network_config=eks_legacy.CfnCluster.KubernetesNetworkConfigProperty( ip_family="ipFamily", service_ipv4_cidr="serviceIpv4Cidr", service_ipv6_cidr="serviceIpv6Cidr" ), logging=eks_legacy.CfnCluster.LoggingProperty( cluster_logging=eks_legacy.CfnCluster.ClusterLoggingProperty( enabled_types=[eks_legacy.CfnCluster.LoggingTypeConfigProperty( type="type" )] ) ), name="name", outpost_config=eks_legacy.CfnCluster.OutpostConfigProperty( control_plane_instance_type="controlPlaneInstanceType", outpost_arns=["outpostArns"], # the properties below are optional control_plane_placement=eks_legacy.CfnCluster.ControlPlanePlacementProperty( group_name="groupName" ) ), tags=[CfnTag( key="key", value="value" )], version="version" )
Create a new
AWS::EKS::Cluster.- Parameters:
scope (
Construct) –scope in which this resource is defined.
id (
str) –scoped id of the resource.
resources_vpc_config (
Union[IResolvable,ResourcesVpcConfigProperty,Dict[str,Any]]) – The VPC configuration that’s used by the cluster control plane. Amazon EKS VPC resources have specific requirements to work properly with Kubernetes. For more information, see Cluster VPC Considerations and Cluster Security Group Considerations in the Amazon EKS User Guide . You must specify at least two subnets. You can specify up to five security groups, but we recommend that you use a dedicated security group for your cluster control plane. .. epigraph:: Updates require replacement of theSecurityGroupIdsandSubnetIdssub-properties.role_arn (
str) – The Amazon Resource Name (ARN) of the IAM role that provides permissions for the Kubernetes control plane to make calls to AWS API operations on your behalf. For more information, see Amazon EKS Service IAM Role in the Amazon EKS User Guide .encryption_config (
Union[IResolvable,Sequence[Union[IResolvable,EncryptionConfigProperty,Dict[str,Any]]],None]) – The encryption configuration for the cluster.kubernetes_network_config (
Union[IResolvable,KubernetesNetworkConfigProperty,Dict[str,Any],None]) – The Kubernetes network configuration for the cluster.logging (
Union[IResolvable,LoggingProperty,Dict[str,Any],None]) – The logging configuration for your cluster.name (
Optional[str]) – The unique name to give to your cluster.outpost_config (
Union[IResolvable,OutpostConfigProperty,Dict[str,Any],None]) – An object representing the configuration of your local Amazon EKS cluster on an AWS Outpost. This object isn’t available for clusters on the AWS cloud.tags (
Optional[Sequence[Union[CfnTag,Dict[str,Any]]]]) – The metadata that you apply to the cluster to assist with categorization and organization. Each tag consists of a key and an optional value, both of which you define. Cluster tags don’t propagate to any other resources associated with the cluster. .. epigraph:: You must have theeks:TagResourceandeks:UntagResourcepermissions for your IAM principal to manage the AWS CloudFormation stack. If you don’t have these permissions, there might be unexpected behavior with stack-level tags propagating to the resource during resource creation and update.version (
Optional[str]) – The desired Kubernetes version for your cluster. If you don’t specify a value here, the default version available in Amazon EKS is used. .. epigraph:: The default version might not be the latest version available.
Methods
- add_deletion_override(path)
Syntactic sugar for
addOverride(path, undefined).- Parameters:
path (
str) – The path of the value to delete.- Return type:
None
- add_depends_on(target)
Indicates that this resource depends on another resource and cannot be provisioned unless the other resource has been successfully provisioned.
This can be used for resources across stacks (or nested stack) boundaries and the dependency will automatically be transferred to the relevant scope.
- Parameters:
target (
CfnResource) –- Return type:
None
- add_metadata(key, value)
Add a value to the CloudFormation Resource Metadata.
- Parameters:
key (
str) –value (
Any) –
- See:
- Return type:
None
Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.
- add_override(path, value)
Adds an override to the synthesized CloudFormation resource.
To add a property override, either use
addPropertyOverrideor prefixpathwith “Properties.” (i.e.Properties.TopicName).If the override is nested, separate each nested level using a dot (.) in the path parameter. If there is an array as part of the nesting, specify the index in the path.
To include a literal
.in the property name, prefix with a\. In most programming languages you will need to write this as"\\."because the\itself will need to be escaped.For example:
cfn_resource.add_override("Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes", ["myattribute"]) cfn_resource.add_override("Properties.GlobalSecondaryIndexes.1.ProjectionType", "INCLUDE")
would add the overrides Example:
"Properties": { "GlobalSecondaryIndexes": [ { "Projection": { "NonKeyAttributes": [ "myattribute" ] ... } ... }, { "ProjectionType": "INCLUDE" ... }, ] ... }
The
valueargument toaddOverridewill not be processed or translated in any way. Pass raw JSON values in here with the correct capitalization for CloudFormation. If you pass CDK classes or structs, they will be rendered with lowercased key names, and CloudFormation will reject the template.- Parameters:
path (
str) –The path of the property, you can use dot notation to override values in complex types. Any intermdediate keys will be created as needed.
value (
Any) –The value. Could be primitive or complex.
- Return type:
None
- add_property_deletion_override(property_path)
Adds an override that deletes the value of a property from the resource definition.
- Parameters:
property_path (
str) – The path to the property.- Return type:
None
- add_property_override(property_path, value)
Adds an override to a resource property.
Syntactic sugar for
addOverride("Properties.<...>", value).- Parameters:
property_path (
str) – The path of the property.value (
Any) – The value.
- Return type:
None
- apply_removal_policy(policy=None, *, apply_to_update_replace_policy=None, default=None)
Sets the deletion policy of the resource based on the removal policy specified.
The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.
The resource can be deleted (
RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN).- Parameters:
policy (
Optional[RemovalPolicy]) –apply_to_update_replace_policy (
Optional[bool]) – Apply the same deletion policy to the resource’s “UpdateReplacePolicy”. Default: truedefault (
Optional[RemovalPolicy]) – The default policy to apply in case the removal policy is not defined. Default: - Default value is resource specific. To determine the default value for a resoure, please consult that specific resource’s documentation.
- Return type:
None
- get_att(attribute_name)
Returns a token for an runtime attribute of this resource.
Ideally, use generated attribute accessors (e.g.
resource.arn), but this can be used for future compatibility in case there is no generated attribute.- Parameters:
attribute_name (
str) – The name of the attribute.- Return type:
- get_metadata(key)
Retrieve a value value from the CloudFormation Resource Metadata.
- Parameters:
key (
str) –- See:
- Return type:
Any
Note that this is a different set of metadata from CDK node metadata; this metadata ends up in the stack template under the resource, whereas CDK node metadata ends up in the Cloud Assembly.
- inspect(inspector)
Examines the CloudFormation resource and discloses attributes.
- Parameters:
inspector (
TreeInspector) –tree inspector to collect and process attributes.
- Return type:
None
- override_logical_id(new_logical_id)
Overrides the auto-generated logical ID with a specific ID.
- Parameters:
new_logical_id (
str) – The new logical ID to use for this stack element.- Return type:
None
- to_string()
Returns a string representation of this construct.
- Return type:
str- Returns:
a string representation of this resource
Attributes
- CFN_RESOURCE_TYPE_NAME = 'AWS::EKS::Cluster'
- attr_arn
The ARN of the cluster, such as
arn:aws:eks:us-west-2:666666666666:cluster/prod.- CloudformationAttribute:
Arn
- attr_certificate_authority_data
The
certificate-authority-datafor your cluster.- CloudformationAttribute:
CertificateAuthorityData
- attr_cluster_security_group_id
The cluster security group that was created by Amazon EKS for the cluster.
Managed node groups use this security group for control plane to data plane communication.
This parameter is only returned by Amazon EKS clusters that support managed node groups. For more information, see Managed node groups in the Amazon EKS User Guide .
- CloudformationAttribute:
ClusterSecurityGroupId
- attr_encryption_config_key_arn
Amazon Resource Name (ARN) or alias of the customer master key (CMK).
- CloudformationAttribute:
EncryptionConfigKeyArn
- attr_endpoint
The endpoint for your Kubernetes API server, such as
https://5E1D0CEXAMPLEA591B746AFC5AB30262.yl4.us-west-2.eks.amazonaws.com.- CloudformationAttribute:
Endpoint
- attr_id
The ID of your local Amazon EKS cluster on an AWS Outpost.
This property isn’t available for an Amazon EKS cluster on the AWS cloud.
- CloudformationAttribute:
Id
- attr_kubernetes_network_config_service_ipv6_cidr
The CIDR block that Kubernetes Service IP addresses are assigned from if you created a
1.21or later cluster with version>1.10.1or later of the Amazon VPC CNI add-on and specifiedipv6for ipFamily when you created the cluster. Kubernetes assigns Service addresses from the unique local address range (fc00::/7) because you can’t specify a customIPv6CIDR block when you create the cluster.- CloudformationAttribute:
KubernetesNetworkConfig.ServiceIpv6Cidr
- attr_open_id_connect_issuer_url
The issuer URL for the OIDC identity provider.
- CloudformationAttribute:
OpenIdConnectIssuerUrl
- cfn_options
Options for this resource, such as condition, update policy etc.
- cfn_resource_type
AWS resource type.
- creation_stack
return:
the stack trace of the point where this Resource was created from, sourced from the +metadata+ entry typed +aws:cdk:logicalId+, and with the bottom-most node +internal+ entries filtered.
- encryption_config
The encryption configuration for the cluster.
- kubernetes_network_config
The Kubernetes network configuration for the cluster.
- logging
The logging configuration for your cluster.
- logical_id
The logical ID for this CloudFormation stack element.
The logical ID of the element is calculated from the path of the resource node in the construct tree.
To override this value, use
overrideLogicalId(newLogicalId).- Returns:
the logical ID as a stringified token. This value will only get resolved during synthesis.
- name
The unique name to give to your cluster.
- node
The construct tree node associated with this construct.
- outpost_config
An object representing the configuration of your local Amazon EKS cluster on an AWS Outpost.
This object isn’t available for clusters on the AWS cloud.
- ref
Return a string that will be resolved to a CloudFormation
{ Ref }for this element.If, by any chance, the intrinsic reference of a resource is not a string, you could coerce it to an IResolvable through
Lazy.any({ produce: resource.ref }).
- resources_vpc_config
The VPC configuration that’s used by the cluster control plane.
Amazon EKS VPC resources have specific requirements to work properly with Kubernetes. For more information, see Cluster VPC Considerations and Cluster Security Group Considerations in the Amazon EKS User Guide . You must specify at least two subnets. You can specify up to five security groups, but we recommend that you use a dedicated security group for your cluster control plane. .. epigraph:
Updates require replacement of the ``SecurityGroupIds`` and ``SubnetIds`` sub-properties.
- role_arn
The Amazon Resource Name (ARN) of the IAM role that provides permissions for the Kubernetes control plane to make calls to AWS API operations on your behalf.
For more information, see Amazon EKS Service IAM Role in the Amazon EKS User Guide .
- stack
The stack in which this element is defined.
CfnElements must be defined within a stack scope (directly or indirectly).
- tags
The metadata that you apply to the cluster to assist with categorization and organization.
Each tag consists of a key and an optional value, both of which you define. Cluster tags don’t propagate to any other resources associated with the cluster. .. epigraph:
You must have the ``eks:TagResource`` and ``eks:UntagResource`` permissions for your `IAM principal <https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_terms-and-concepts.html>`_ to manage the AWS CloudFormation stack. If you don't have these permissions, there might be unexpected behavior with stack-level tags propagating to the resource during resource creation and update.
- version
The desired Kubernetes version for your cluster.
If you don’t specify a value here, the default version available in Amazon EKS is used. .. epigraph:
The default version might not be the latest version available.
Static Methods
- classmethod is_cfn_element(x)
Returns
trueif a construct is a stack element (i.e. part of the synthesized cloudformation template).Uses duck-typing instead of
instanceofto allow stack elements from different versions of this library to be included in the same stack.- Parameters:
x (
Any) –- Return type:
bool- Returns:
The construct as a stack element or undefined if it is not a stack element.
- classmethod is_cfn_resource(construct)
Check whether the given construct is a CfnResource.
- Parameters:
construct (
IConstruct) –- Return type:
bool
- classmethod is_construct(x)
Return whether the given object is a Construct.
- Parameters:
x (
Any) –- Return type:
bool
ClusterLoggingProperty
- class CfnCluster.ClusterLoggingProperty(*, enabled_types=None)
Bases:
objectThe cluster control plane logging configuration for your cluster.
When updating a resource, you must include this
ClusterLoggingproperty if the previous CloudFormation template of the resource had it.- Parameters:
enabled_types (
Union[IResolvable,Sequence[Union[IResolvable,LoggingTypeConfigProperty,Dict[str,Any]]],None]) – The enabled control plane logs for your cluster. All log types are disabled if the array is empty. .. epigraph:: When updating a resource, you must include thisEnabledTypesproperty if the previous CloudFormation template of the resource had it.- Link:
- ExampleMetadata:
fixture=_generated
Example:
# The code below shows an example of how to instantiate this type. # The values are placeholders you should change. import aws_cdk.aws_eks_legacy as eks_legacy cluster_logging_property = eks_legacy.CfnCluster.ClusterLoggingProperty( enabled_types=[eks_legacy.CfnCluster.LoggingTypeConfigProperty( type="type" )] )
Attributes
- enabled_types
The enabled control plane logs for your cluster. All log types are disabled if the array is empty.
When updating a resource, you must include this
EnabledTypesproperty if the previous CloudFormation template of the resource had it.
ControlPlanePlacementProperty
- class CfnCluster.ControlPlanePlacementProperty(*, group_name=None)
Bases:
objectThe placement configuration for all the control plane instances of your local Amazon EKS cluster on an AWS Outpost.
For more information, see Capacity considerations in the Amazon EKS User Guide.
- Parameters:
group_name (
Optional[str]) – The name of the placement group for the Kubernetes control plane instances.- Link:
- ExampleMetadata:
fixture=_generated
Example:
# The code below shows an example of how to instantiate this type. # The values are placeholders you should change. import aws_cdk.aws_eks_legacy as eks_legacy control_plane_placement_property = eks_legacy.CfnCluster.ControlPlanePlacementProperty( group_name="groupName" )
Attributes
- group_name
The name of the placement group for the Kubernetes control plane instances.
EncryptionConfigProperty
- class CfnCluster.EncryptionConfigProperty(*, provider=None, resources=None)
Bases:
objectThe encryption configuration for the cluster.
- Parameters:
provider (
Union[IResolvable,ProviderProperty,Dict[str,Any],None]) – The encryption provider for the cluster.resources (
Optional[Sequence[str]]) – Specifies the resources to be encrypted. The only supported value is “secrets”.
- Link:
- ExampleMetadata:
fixture=_generated
Example:
# The code below shows an example of how to instantiate this type. # The values are placeholders you should change. import aws_cdk.aws_eks_legacy as eks_legacy encryption_config_property = eks_legacy.CfnCluster.EncryptionConfigProperty( provider=eks_legacy.CfnCluster.ProviderProperty( key_arn="keyArn" ), resources=["resources"] )
Attributes
- provider
The encryption provider for the cluster.
- resources
Specifies the resources to be encrypted.
The only supported value is “secrets”.
KubernetesNetworkConfigProperty
- class CfnCluster.KubernetesNetworkConfigProperty(*, ip_family=None, service_ipv4_cidr=None, service_ipv6_cidr=None)
Bases:
objectThe Kubernetes network configuration for the cluster.
- Parameters:
ip_family (
Optional[str]) – Specify which IP family is used to assign Kubernetes pod and service IP addresses. If you don’t specify a value,ipv4is used by default. You can only specify an IP family when you create a cluster and can’t change this value once the cluster is created. If you specifyipv6, the VPC and subnets that you specify for cluster creation must have bothIPv4andIPv6CIDR blocks assigned to them. You can’t specifyipv6for clusters in China Regions. You can only specifyipv6for1.21and later clusters that use version1.10.1or later of the Amazon VPC CNI add-on. If you specifyipv6, then ensure that your VPC meets the requirements listed in the considerations listed in Assigning IPv6 addresses to pods and services in the Amazon EKS User Guide. Kubernetes assigns servicesIPv6addresses from the unique local address range(fc00::/7). You can’t specify a customIPv6CIDR block. Pod addresses are assigned from the subnet’sIPv6CIDR.service_ipv4_cidr (
Optional[str]) – Don’t specify a value if you selectipv6for ipFamily . The CIDR block to assign Kubernetes service IP addresses from. If you don’t specify a block, Kubernetes assigns addresses from either the10.100.0.0/16or172.20.0.0/16CIDR blocks. We recommend that you specify a block that does not overlap with resources in other networks that are peered or connected to your VPC. The block must meet the following requirements: - Within one of the following private IP address blocks:10.0.0.0/8,172.16.0.0/12, or192.168.0.0/16. - Doesn’t overlap with any CIDR block assigned to the VPC that you selected for VPC. - Between /24 and /12. .. epigraph:: You can only specify a custom CIDR block when you create a cluster and can’t change this value once the cluster is created.service_ipv6_cidr (
Optional[str]) – The CIDR block that Kubernetes pod and service IP addresses are assigned from if you created a 1.21 or later cluster with version 1.10.1 or later of the Amazon VPC CNI add-on and specifiedipv6for ipFamily when you created the cluster. Kubernetes assigns service addresses from the unique local address range (fc00::/7) because you can’t specify a custom IPv6 CIDR block when you create the cluster.
- Link:
- ExampleMetadata:
fixture=_generated
Example:
# The code below shows an example of how to instantiate this type. # The values are placeholders you should change. import aws_cdk.aws_eks_legacy as eks_legacy kubernetes_network_config_property = eks_legacy.CfnCluster.KubernetesNetworkConfigProperty( ip_family="ipFamily", service_ipv4_cidr="serviceIpv4Cidr", service_ipv6_cidr="serviceIpv6Cidr" )
Attributes
- ip_family
Specify which IP family is used to assign Kubernetes pod and service IP addresses.
If you don’t specify a value,
ipv4is used by default. You can only specify an IP family when you create a cluster and can’t change this value once the cluster is created. If you specifyipv6, the VPC and subnets that you specify for cluster creation must have bothIPv4andIPv6CIDR blocks assigned to them. You can’t specifyipv6for clusters in China Regions.You can only specify
ipv6for1.21and later clusters that use version1.10.1or later of the Amazon VPC CNI add-on. If you specifyipv6, then ensure that your VPC meets the requirements listed in the considerations listed in Assigning IPv6 addresses to pods and services in the Amazon EKS User Guide. Kubernetes assigns servicesIPv6addresses from the unique local address range(fc00::/7). You can’t specify a customIPv6CIDR block. Pod addresses are assigned from the subnet’sIPv6CIDR.
- service_ipv4_cidr
Don’t specify a value if you select
ipv6for ipFamily .The CIDR block to assign Kubernetes service IP addresses from. If you don’t specify a block, Kubernetes assigns addresses from either the
10.100.0.0/16or172.20.0.0/16CIDR blocks. We recommend that you specify a block that does not overlap with resources in other networks that are peered or connected to your VPC. The block must meet the following requirements:Within one of the following private IP address blocks:
10.0.0.0/8,172.16.0.0/12, or192.168.0.0/16.Doesn’t overlap with any CIDR block assigned to the VPC that you selected for VPC.
Between /24 and /12.
You can only specify a custom CIDR block when you create a cluster and can’t change this value once the cluster is created.
- service_ipv6_cidr
The CIDR block that Kubernetes pod and service IP addresses are assigned from if you created a 1.21 or later cluster with version 1.10.1 or later of the Amazon VPC CNI add-on and specified
ipv6for ipFamily when you created the cluster. Kubernetes assigns service addresses from the unique local address range (fc00::/7) because you can’t specify a custom IPv6 CIDR block when you create the cluster.
LoggingProperty
- class CfnCluster.LoggingProperty(*, cluster_logging=None)
Bases:
objectEnable or disable exporting the Kubernetes control plane logs for your cluster to CloudWatch Logs.
By default, cluster control plane logs aren’t exported to CloudWatch Logs. For more information, see Amazon EKS Cluster control plane logs in the Amazon EKS User Guide . .. epigraph:
When updating a resource, you must include this ``Logging`` property if the previous CloudFormation template of the resource had it. > CloudWatch Logs ingestion, archive storage, and data scanning rates apply to exported control plane logs. For more information, see `CloudWatch Pricing <https://docs.aws.amazon.com/cloudwatch/pricing/>`_ .
- Parameters:
cluster_logging (
Union[IResolvable,ClusterLoggingProperty,Dict[str,Any],None]) – The cluster control plane logging configuration for your cluster.- Link:
- ExampleMetadata:
fixture=_generated
Example:
# The code below shows an example of how to instantiate this type. # The values are placeholders you should change. import aws_cdk.aws_eks_legacy as eks_legacy logging_property = eks_legacy.CfnCluster.LoggingProperty( cluster_logging=eks_legacy.CfnCluster.ClusterLoggingProperty( enabled_types=[eks_legacy.CfnCluster.LoggingTypeConfigProperty( type="type" )] ) )
Attributes
- cluster_logging
The cluster control plane logging configuration for your cluster.
LoggingTypeConfigProperty
- class CfnCluster.LoggingTypeConfigProperty(*, type=None)
Bases:
objectThe enabled logging type.
For a list of the valid logging types, see the
`typesproperty ofLogSetup<https://docs.aws.amazon.com/eks/latest/APIReference/API_LogSetup.html#AmazonEKS-Type-LogSetup-types>`_ in the Amazon EKS API Reference .- Parameters:
type (
Optional[str]) – The name of the log type.- Link:
- ExampleMetadata:
fixture=_generated
Example:
# The code below shows an example of how to instantiate this type. # The values are placeholders you should change. import aws_cdk.aws_eks_legacy as eks_legacy logging_type_config_property = eks_legacy.CfnCluster.LoggingTypeConfigProperty( type="type" )
Attributes
OutpostConfigProperty
- class CfnCluster.OutpostConfigProperty(*, control_plane_instance_type, outpost_arns, control_plane_placement=None)
Bases:
objectThe configuration of your local Amazon EKS cluster on an AWS Outpost.
Before creating a cluster on an Outpost, review Creating a local cluster on an Outpost in the Amazon EKS User Guide . This API isn’t available for Amazon EKS clusters on the AWS cloud.
- Parameters:
control_plane_instance_type (
str) –The Amazon EC2 instance type that you want to use for your local Amazon EKS cluster on Outposts. Choose an instance type based on the number of nodes that your cluster will have. For more information, see Capacity considerations in the Amazon EKS User Guide . The instance type that you specify is used for all Kubernetes control plane instances. The instance type can’t be changed after cluster creation. The control plane is not automatically scaled by Amazon EKS.
outpost_arns (
Sequence[str]) – The ARN of the Outpost that you want to use for your local Amazon EKS cluster on Outposts. Only a single Outpost ARN is supported.control_plane_placement (
Union[IResolvable,ControlPlanePlacementProperty,Dict[str,Any],None]) –An object representing the placement configuration for all the control plane instances of your local Amazon EKS cluster on an AWS Outpost. For more information, see Capacity considerations in the Amazon EKS User Guide .
- Link:
- ExampleMetadata:
fixture=_generated
Example:
# The code below shows an example of how to instantiate this type. # The values are placeholders you should change. import aws_cdk.aws_eks_legacy as eks_legacy outpost_config_property = eks_legacy.CfnCluster.OutpostConfigProperty( control_plane_instance_type="controlPlaneInstanceType", outpost_arns=["outpostArns"], # the properties below are optional control_plane_placement=eks_legacy.CfnCluster.ControlPlanePlacementProperty( group_name="groupName" ) )
Attributes
- control_plane_instance_type
The Amazon EC2 instance type that you want to use for your local Amazon EKS cluster on Outposts.
Choose an instance type based on the number of nodes that your cluster will have. For more information, see Capacity considerations in the Amazon EKS User Guide .
The instance type that you specify is used for all Kubernetes control plane instances. The instance type can’t be changed after cluster creation. The control plane is not automatically scaled by Amazon EKS.
- control_plane_placement
An object representing the placement configuration for all the control plane instances of your local Amazon EKS cluster on an AWS Outpost.
For more information, see Capacity considerations in the Amazon EKS User Guide .
- outpost_arns
The ARN of the Outpost that you want to use for your local Amazon EKS cluster on Outposts.
Only a single Outpost ARN is supported.
ProviderProperty
- class CfnCluster.ProviderProperty(*, key_arn=None)
Bases:
objectIdentifies the AWS Key Management Service ( AWS KMS ) key used to encrypt the secrets.
- Parameters:
key_arn (
Optional[str]) –Amazon Resource Name (ARN) or alias of the KMS key. The KMS key must be symmetric and created in the same AWS Region as the cluster. If the KMS key was created in a different account, the IAM principal must have access to the KMS key. For more information, see Allowing users in other accounts to use a KMS key in the AWS Key Management Service Developer Guide .
- Link:
- ExampleMetadata:
fixture=_generated
Example:
# The code below shows an example of how to instantiate this type. # The values are placeholders you should change. import aws_cdk.aws_eks_legacy as eks_legacy provider_property = eks_legacy.CfnCluster.ProviderProperty( key_arn="keyArn" )
Attributes
- key_arn
Amazon Resource Name (ARN) or alias of the KMS key.
The KMS key must be symmetric and created in the same AWS Region as the cluster. If the KMS key was created in a different account, the IAM principal must have access to the KMS key. For more information, see Allowing users in other accounts to use a KMS key in the AWS Key Management Service Developer Guide .
ResourcesVpcConfigProperty
- class CfnCluster.ResourcesVpcConfigProperty(*, subnet_ids, endpoint_private_access=None, endpoint_public_access=None, public_access_cidrs=None, security_group_ids=None)
Bases:
objectAn object representing the VPC configuration to use for an Amazon EKS cluster.
When updating a resource, you must include these properties if the previous CloudFormation template of the resource had them:
EndpointPublicAccessEndpointPrivateAccessPublicAccessCidrs
- Parameters:
subnet_ids (
Sequence[str]) – Specify subnets for your Amazon EKS nodes. Amazon EKS creates cross-account elastic network interfaces in these subnets to allow communication between your nodes and the Kubernetes control plane.endpoint_private_access (
Union[bool,IResolvable,None]) – Set this value totrueto enable private access for your cluster’s Kubernetes API server endpoint. If you enable private access, Kubernetes API requests from within your cluster’s VPC use the private VPC endpoint. The default value for this parameter isfalse, which disables private access for your Kubernetes API server. If you disable private access and you have nodes or AWS Fargate pods in the cluster, then ensure thatpublicAccessCidrsincludes the necessary CIDR blocks for communication with the nodes or Fargate pods. For more information, see Amazon EKS cluster endpoint access control in the Amazon EKS User Guide .endpoint_public_access (
Union[bool,IResolvable,None]) –Set this value to
falseto disable public access to your cluster’s Kubernetes API server endpoint. If you disable public access, your cluster’s Kubernetes API server can only receive requests from within the cluster VPC. The default value for this parameter istrue, which enables public access for your Kubernetes API server. For more information, see Amazon EKS cluster endpoint access control in the Amazon EKS User Guide .public_access_cidrs (
Optional[Sequence[str]]) –The CIDR blocks that are allowed access to your cluster’s public Kubernetes API server endpoint. Communication to the endpoint from addresses outside of the CIDR blocks that you specify is denied. The default value is
0.0.0.0/0. If you’ve disabled private endpoint access and you have nodes or AWS Fargate pods in the cluster, then ensure that you specify the necessary CIDR blocks. For more information, see Amazon EKS cluster endpoint access control in the Amazon EKS User Guide .security_group_ids (
Optional[Sequence[str]]) – Specify one or more security groups for the cross-account elastic network interfaces that Amazon EKS creates to use that allow communication between your nodes and the Kubernetes control plane. If you don’t specify any security groups, then familiarize yourself with the difference between Amazon EKS defaults for clusters deployed with Kubernetes. For more information, see Amazon EKS security group considerations in the Amazon EKS User Guide .
- Link:
- ExampleMetadata:
fixture=_generated
Example:
# The code below shows an example of how to instantiate this type. # The values are placeholders you should change. import aws_cdk.aws_eks_legacy as eks_legacy resources_vpc_config_property = eks_legacy.CfnCluster.ResourcesVpcConfigProperty( subnet_ids=["subnetIds"], # the properties below are optional endpoint_private_access=False, endpoint_public_access=False, public_access_cidrs=["publicAccessCidrs"], security_group_ids=["securityGroupIds"] )
Attributes
- endpoint_private_access
Set this value to
trueto enable private access for your cluster’s Kubernetes API server endpoint.If you enable private access, Kubernetes API requests from within your cluster’s VPC use the private VPC endpoint. The default value for this parameter is
false, which disables private access for your Kubernetes API server. If you disable private access and you have nodes or AWS Fargate pods in the cluster, then ensure thatpublicAccessCidrsincludes the necessary CIDR blocks for communication with the nodes or Fargate pods. For more information, see Amazon EKS cluster endpoint access control in the Amazon EKS User Guide .
- endpoint_public_access
Set this value to
falseto disable public access to your cluster’s Kubernetes API server endpoint.If you disable public access, your cluster’s Kubernetes API server can only receive requests from within the cluster VPC. The default value for this parameter is
true, which enables public access for your Kubernetes API server. For more information, see Amazon EKS cluster endpoint access control in the Amazon EKS User Guide .
- public_access_cidrs
The CIDR blocks that are allowed access to your cluster’s public Kubernetes API server endpoint.
Communication to the endpoint from addresses outside of the CIDR blocks that you specify is denied. The default value is
0.0.0.0/0. If you’ve disabled private endpoint access and you have nodes or AWS Fargate pods in the cluster, then ensure that you specify the necessary CIDR blocks. For more information, see Amazon EKS cluster endpoint access control in the Amazon EKS User Guide .
- security_group_ids
Specify one or more security groups for the cross-account elastic network interfaces that Amazon EKS creates to use that allow communication between your nodes and the Kubernetes control plane.
If you don’t specify any security groups, then familiarize yourself with the difference between Amazon EKS defaults for clusters deployed with Kubernetes. For more information, see Amazon EKS security group considerations in the Amazon EKS User Guide .
- subnet_ids
Specify subnets for your Amazon EKS nodes.
Amazon EKS creates cross-account elastic network interfaces in these subnets to allow communication between your nodes and the Kubernetes control plane.