CfnSecurityGroupIngress L1 construct
Adds an inbound (ingress) rule to a security group.
An inbound rule permits instances to receive traffic from the specified IPv4 or IPv6 address range, the IP addresses that are specified by a prefix list, or the instances that are associated with a source security group. For more information, see Security group rules .
You must specify exactly one of the following sources: an IPv4 address range, an IPv6 address range, a prefix list, or a security group.
You must specify a protocol for each rule (for example, TCP). If the protocol is TCP or UDP, you must also specify a port or port range. If the protocol is ICMP or ICMPv6, you must also specify the ICMP/ICMPv6 type and code.
Rule changes are propagated to instances associated with the security group as quickly as possible. However, a small delay might occur.
Example
// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import { aws_ec2 as ec2 } from 'aws-cdk-lib';
const cfnSecurityGroupIngress = new ec2.CfnSecurityGroupIngress(this, 'MyCfnSecurityGroupIngress', {
ipProtocol: 'ipProtocol',
// the properties below are optional
cidrIp: 'cidrIp',
cidrIpv6: 'cidrIpv6',
description: 'description',
fromPort: 123,
groupId: 'groupId',
groupName: 'groupName',
sourcePrefixListId: 'sourcePrefixListId',
sourceSecurityGroupId: 'sourceSecurityGroupId',
sourceSecurityGroupName: 'sourceSecurityGroupName',
sourceSecurityGroupOwnerId: 'sourceSecurityGroupOwnerId',
toPort: 123,
});
# The code below shows an example of how to instantiate this type.
# The values are placeholders you should change.
from aws_cdk import aws_ec2 as ec2
cfn_security_group_ingress = ec2.CfnSecurityGroupIngress(self, "MyCfnSecurityGroupIngress",
ip_protocol="ipProtocol",
# the properties below are optional
cidr_ip="cidrIp",
cidr_ipv6="cidrIpv6",
description="description",
from_port=123,
group_id="groupId",
group_name="groupName",
source_prefix_list_id="sourcePrefixListId",
source_security_group_id="sourceSecurityGroupId",
source_security_group_name="sourceSecurityGroupName",
source_security_group_owner_id="sourceSecurityGroupOwnerId",
to_port=123
)
// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import software.amazon.awscdk.services.ec2.*;
CfnSecurityGroupIngress cfnSecurityGroupIngress = CfnSecurityGroupIngress.Builder.create(this, "MyCfnSecurityGroupIngress")
.ipProtocol("ipProtocol")
// the properties below are optional
.cidrIp("cidrIp")
.cidrIpv6("cidrIpv6")
.description("description")
.fromPort(123)
.groupId("groupId")
.groupName("groupName")
.sourcePrefixListId("sourcePrefixListId")
.sourceSecurityGroupId("sourceSecurityGroupId")
.sourceSecurityGroupName("sourceSecurityGroupName")
.sourceSecurityGroupOwnerId("sourceSecurityGroupOwnerId")
.toPort(123)
.build();
// Install: dotnet add package Amazon.CDK.Lib
// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
using Amazon.CDK.AWS.EC2;
var cfnSecurityGroupIngress = new CfnSecurityGroupIngress(this, "MyCfnSecurityGroupIngress", new CfnSecurityGroupIngressProps {
IpProtocol = "ipProtocol",
// the properties below are optional
CidrIp = "cidrIp",
CidrIpv6 = "cidrIpv6",
Description = "description",
FromPort = 123,
GroupId = "groupId",
GroupName = "groupName",
SourcePrefixListId = "sourcePrefixListId",
SourceSecurityGroupId = "sourceSecurityGroupId",
SourceSecurityGroupName = "sourceSecurityGroupName",
SourceSecurityGroupOwnerId = "sourceSecurityGroupOwnerId",
ToPort = 123
});
// Install: go get github.com/aws/aws-cdk-go/awscdk/v2
// The code below shows an example of how to instantiate this type.
// The values are placeholders you should change.
import "github.com/aws/aws-cdk-go/awscdk"
cfnSecurityGroupIngress := awscdk.Aws_ec2.NewCfnSecurityGroupIngress(this, jsii.String("MyCfnSecurityGroupIngress"), &CfnSecurityGroupIngressProps{
IpProtocol: jsii.String("ipProtocol"),
// the properties below are optional
CidrIp: jsii.String("cidrIp"),
CidrIpv6: jsii.String("cidrIpv6"),
Description: jsii.String("description"),
FromPort: jsii.Number(123),
GroupId: jsii.String("groupId"),
GroupName: jsii.String("groupName"),
SourcePrefixListId: jsii.String("sourcePrefixListId"),
SourceSecurityGroupId: jsii.String("sourceSecurityGroupId"),
SourceSecurityGroupName: jsii.String("sourceSecurityGroupName"),
SourceSecurityGroupOwnerId: jsii.String("sourceSecurityGroupOwnerId"),
ToPort: jsii.Number(123),
})
Initializer
new CfnSecurityGroupIngress(scope: Construct, id: string, props: CfnSecurityGroupIngressProps)
CfnSecurityGroupIngress(scope: Construct, id: str, props: CfnSecurityGroupIngressProps)
new CfnSecurityGroupIngress(Construct scope, String id, CfnSecurityGroupIngressProps props)
new CfnSecurityGroupIngress(Construct scope, string id, CfnSecurityGroupIngressProps props)
NewCfnSecurityGroupIngress(Scope Construct, Id *string, Props CfnSecurityGroupIngressProps)
Construct Props
cidrIpoptionalstringcidr_ipoptionalstrcidrIpoptionalStringCidrIpoptionalstringCidrIpoptional*string#notes
You must specify exactly one of the following: CidrIp , CidrIpv6 , SourcePrefixListId , or SourceSecurityGroupId .
For examples of rules that you can add to security groups for specific access scenarios, see Security group rules for different use cases in the Amazon EC2 User Guide .
cidrIpv6optionalstringcidr_ipv6optionalstrcidrIpv6optionalStringCidrIpv6optionalstringCidrIpv6optional*string#notes
You must specify exactly one of the following: CidrIp , CidrIpv6 , SourcePrefixListId , or SourceSecurityGroupId .
For examples of rules that you can add to security groups for specific access scenarios, see Security group rules for different use cases in the Amazon EC2 User Guide .
descriptionoptionalstringdescriptionoptionalstrdescriptionoptionalStringDescriptionoptionalstringDescriptionoptional*string#You can replace an existing description, or add a description to a rule that did not have one previously.
Constraints: Up to 255 characters in length. Allowed characters are a-z, A-Z, 0-9, spaces, and ._-😕()#,@[]+=;{}!$*
fromPortoptionalnumberfrom_portoptionalint | floatfromPortoptionalNumberFromPortoptionaldoubleFromPortoptional*float64#A value of -1 indicates all ICMP/ICMPv6 types. If you specify all ICMP/ICMPv6 types, you must specify all codes.
Use this for ICMP and any protocol that uses ports.
groupIdoptionalstring | ISecurityGroupRefgroup_idoptionaltyping.Union[str, ISecurityGroupRef]groupIdoptionalStringGroupIdoptionalstringGroupIdoptionalinterface{}#groupNameoptionalstring | ISecurityGroupRefgroup_nameoptionaltyping.Union[str, ISecurityGroupRef]groupNameoptionalStringGroupNameoptionalstringGroupNameoptionalinterface{}#For security groups for a default VPC you can specify either the ID or the name of the security group. For security groups for a nondefault VPC, you must specify the ID of the security group.
notes
Use -1 to specify all protocols. When authorizing security group rules, specifying -1 or a protocol number other than tcp , udp , icmp , or icmpv6 allows traffic on all ports, regardless of any port range you specify. For tcp , udp , and icmp , you must specify a port range. For icmpv6 , the port range is optional; if you omit the port range, traffic for all types and codes is allowed.
sourcePrefixListIdoptionalstring | IPrefixListRefsource_prefix_list_idoptionaltyping.Union[str, IPrefixListRef]sourcePrefixListIdoptionalStringSourcePrefixListIdoptionalstringSourcePrefixListIdoptionalinterface{}#sourceSecurityGroupIdoptionalstring | ISecurityGroupRefsource_security_group_idoptionaltyping.Union[str, ISecurityGroupRef]sourceSecurityGroupIdoptionalStringSourceSecurityGroupIdoptionalstringSourceSecurityGroupIdoptionalinterface{}#You must specify either the security group ID or the security group name. For security groups in a nondefault VPC, you must specify the security group ID.
sourceSecurityGroupNameoptionalstringsource_security_group_nameoptionalstrsourceSecurityGroupNameoptionalStringSourceSecurityGroupNameoptionalstringSourceSecurityGroupNameoptional*string#notes
You must specify either the security group ID or the security group name. You can't specify the group name in combination with an IP address range. Creates rules that grant full ICMP, UDP, and TCP access.
For security groups in a nondefault VPC, you must specify the group ID.
sourceSecurityGroupOwnerIdoptionalstringsource_security_group_owner_idoptionalstrsourceSecurityGroupOwnerIdoptionalStringSourceSecurityGroupOwnerIdoptionalstringSourceSecurityGroupOwnerIdoptional*string#notes
You can't specify this property with an IP address range. Creates rules that grant full ICMP, UDP, and TCP access.
If you specify SourceSecurityGroupName or SourceSecurityGroupId and that security group is owned by a different account than the account creating the stack, you must specify SourceSecurityGroupOwnerId ; otherwise, this property is optional.
toPortoptionalnumberto_portoptionalint | floattoPortoptionalNumberToPortoptionaldoubleToPortoptional*float64#A value of -1 indicates all ICMP/ICMPv6 codes for the specified ICMP type. If you specify all ICMP/ICMPv6 types, you must specify all codes.
Use this for ICMP and any protocol that uses ports.
Properties
CFN_RESOURCE_TYPE_NAMEstringcfn_resource_type_namestrCFN_RESOURCE_TYPE_NAMEStringCFN_RESOURCE_TYPE_NAMEstringCFN_RESOURCE_TYPE_NAME*stringrequiredstatic#cfnOptionsICfnResourceOptionscfn_optionsICfnResourceOptionscfnOptionsICfnResourceOptionsCfnOptionsICfnResourceOptionsCfnOptionsICfnResourceOptionsrequired#cfnResourceTypestringcfn_resource_typestrcfnResourceTypeStringCfnResourceTypestringCfnResourceType*stringrequired#cidrIpmay be undefinedstringcidr_ipmay be undefinedstrcidrIpmay be undefinedStringCidrIpmay be undefinedstringCidrIpmay be undefined*string#cidrIpv6may be undefinedstringcidr_ipv6may be undefinedstrcidrIpv6may be undefinedStringCidrIpv6may be undefinedstringCidrIpv6may be undefined*string#creationStackstring[]creation_stacktyping.List[str]creationStackList<String>CreationStackstring[]CreationStack*[]*stringrequired#descriptionmay be undefinedstringdescriptionmay be undefinedstrdescriptionmay be undefinedStringDescriptionmay be undefinedstringDescriptionmay be undefined*string#fromPortmay be undefinednumberfrom_portmay be undefinedint | floatfromPortmay be undefinedNumberFromPortmay be undefineddoubleFromPortmay be undefined*float64#groupIdmay be undefinedstringgroup_idmay be undefinedstrgroupIdmay be undefinedStringGroupIdmay be undefinedstringGroupIdmay be undefined*string#groupNamemay be undefinedstringgroup_namemay be undefinedstrgroupNamemay be undefinedStringGroupNamemay be undefinedstringGroupNamemay be undefined*string#The logical ID of the element is calculated from the path of the resource node in the construct tree.
To override this value, use overrideLogicalId(newLogicalId).
If, by any chance, the intrinsic reference of a resource is not a string, you could coerce it to an IResolvable through Lazy.any({ produce: resource.ref }).
securityGroupIngressRefSecurityGroupIngressReferencesecurity_group_ingress_refSecurityGroupIngressReferencesecurityGroupIngressRefSecurityGroupIngressReferenceSecurityGroupIngressRefSecurityGroupIngressReferenceSecurityGroupIngressRefSecurityGroupIngressReferencerequired#sourcePrefixListIdmay be undefinedstringsource_prefix_list_idmay be undefinedstrsourcePrefixListIdmay be undefinedStringSourcePrefixListIdmay be undefinedstringSourcePrefixListIdmay be undefined*string#sourceSecurityGroupIdmay be undefinedstringsource_security_group_idmay be undefinedstrsourceSecurityGroupIdmay be undefinedStringSourceSecurityGroupIdmay be undefinedstringSourceSecurityGroupIdmay be undefined*string#sourceSecurityGroupNamemay be undefinedstringsource_security_group_namemay be undefinedstrsourceSecurityGroupNamemay be undefinedStringSourceSecurityGroupNamemay be undefinedstringSourceSecurityGroupNamemay be undefined*string#sourceSecurityGroupOwnerIdmay be undefinedstringsource_security_group_owner_idmay be undefinedstrsourceSecurityGroupOwnerIdmay be undefinedStringSourceSecurityGroupOwnerIdmay be undefinedstringSourceSecurityGroupOwnerIdmay be undefined*string#CfnElements must be defined within a stack scope (directly or indirectly).
toPortmay be undefinednumberto_portmay be undefinedint | floattoPortmay be undefinedNumberToPortmay be undefineddoubleToPortmay be undefined*float64#Methods
addDeletionOverride(path: string): voiddef add_deletion_override(self, path: str) -> Nonepublic void addDeletionOverride(String path)public void AddDeletionOverride(string path)func AddDeletionOverride(Path *string)#1 parameter
Parameters
pathpathpathpathPath— The path of the value to delete.
addDependency(target: CfnResource): voiddef add_dependency(self, target: CfnResource) -> Nonepublic void addDependency(CfnResource target)public void AddDependency(CfnResource target)func AddDependency(Target CfnResource)deprecated#This method has been renamed to addResourceDependency to more clearly set it apart from construct.node.addDependency. See the documentation of that function for more details.
addDependsOn(target: CfnResource): voiddef add_depends_on(self, target: CfnResource) -> Nonepublic void addDependsOn(CfnResource target)public void AddDependsOn(CfnResource target)func AddDependsOn(Target CfnResource)deprecated#notes
This can be used for resources across stacks (or nested stack) boundaries and the dependency will automatically be transferred to the relevant scope.
This method has been renamed to addResourceDependency, which makes it more clear that this method operates at a different level from the construct-level construct.node.addDependency() mechanism.
addMetadata(key: string, value: any): voiddef add_metadata(self, key: str, value: Any) -> Nonepublic void addMetadata(String key, Object value)public void AddMetadata(string key, object value)func AddMetadata(Key *string, Value interface{})#addOverride(path: string, value: any): voiddef add_override(self, path: str, value: Any) -> Nonepublic void addOverride(String path, Object value)public void AddOverride(string path, object value)func AddOverride(Path *string, Value interface{})#notes · 2 parameters
To add a property override, either use addPropertyOverride or prefix path with "Properties." (i.e. Properties.TopicName).
If the override is nested, separate each nested level using a dot (.) in the path parameter. If there is an array as part of the nesting, specify the index in the path.
To include a literal . in the property name, prefix with a \. In most programming languages you will need to write this as "\\." because the \ itself will need to be escaped.
For example,
cfnResource.addOverride('Properties.GlobalSecondaryIndexes.0.Projection.NonKeyAttributes', ['myattribute']);
cfnResource.addOverride('Properties.GlobalSecondaryIndexes.1.ProjectionType', 'INCLUDE');
would add the overrides
"Properties": {
"GlobalSecondaryIndexes": [
{
"Projection": {
"NonKeyAttributes": [ "myattribute" ]
...
}
...
},
{
"ProjectionType": "INCLUDE"
...
},
]
...
}
The value argument to addOverride will not be processed or translated in any way. Pass raw JSON values in here with the correct capitalization for CloudFormation. If you pass CDK classes or structs, they will be rendered with lowercased key names, and CloudFormation will reject the template.
Parameters
pathpathpathpathPath— - The path of the property, you can use dot notation to override values in complex types.valuevaluevaluevalueValue— - The value.
addPropertyDeletionOverride(propertyPath: string): voiddef add_property_deletion_override(self, property_path: str) -> Nonepublic void addPropertyDeletionOverride(String propertyPath)public void AddPropertyDeletionOverride(string propertyPath)func AddPropertyDeletionOverride(PropertyPath *string)#1 parameter
Parameters
propertyPathproperty_pathpropertyPathpropertyPathPropertyPath— The path to the property.
addPropertyOverride(propertyPath: string, value: any): voiddef add_property_override(self, property_path: str, value: Any) -> Nonepublic void addPropertyOverride(String propertyPath, Object value)public void AddPropertyOverride(string propertyPath, object value)func AddPropertyOverride(PropertyPath *string, Value interface{})#Syntactic sugar for addOverride("Properties.<...>", value).
2 parameters
Parameters
propertyPathproperty_pathpropertyPathpropertyPathPropertyPath— The path of the property.valuevaluevaluevalueValue— The value.
addResourceDependency(target: CfnResource, reason?: string): voiddef add_resource_dependency(self, target: CfnResource, reason: typing.Optional[str] = None) -> Nonepublic void addResourceDependency(CfnResource target, String reason)public void AddResourceDependency(CfnResource target, string? reason = null)func AddResourceDependency(Target CfnResource, Reason *string)#notes
This can be used for resources across stacks (or nested stack) boundaries and the dependency will automatically be transferred to the relevant scope.
This method only adds dependencies between L1 resources. If you are looking for a generic construct-to-construct dependency mechanism that works for all constructs including L2s, use construct.node.addDependency instead.
applyCrossStackReferenceStrength(strength: ReferenceStrength): voiddef apply_cross_stack_reference_strength(self, strength: ReferenceStrength) -> Nonepublic void applyCrossStackReferenceStrength(ReferenceStrength strength)public void ApplyCrossStackReferenceStrength(ReferenceStrength strength)func ApplyCrossStackReferenceStrength(Strength ReferenceStrength)#When set, any cross-stack reference to this resource will use the specified strength instead of the global default from the consuming stack's context.
1 parameter
Parameters
strengthstrengthstrengthstrengthStrength— - The reference strength to use for this resource.
applyRemovalPolicy(policy?: RemovalPolicy, options?: RemovalPolicyOptions): voiddef apply_removal_policy(self, policy: typing.Optional[RemovalPolicy] = None, options: typing.Optional[RemovalPolicyOptions] = None) -> Nonepublic void applyRemovalPolicy(RemovalPolicy policy, RemovalPolicyOptions options)public void ApplyRemovalPolicy(RemovalPolicy? policy = null, RemovalPolicyOptions? options = null)func ApplyRemovalPolicy(Policy RemovalPolicy, Options RemovalPolicyOptions)#notes
The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you've removed it from the CDK application or because you've made a change that requires the resource to be replaced.
The resource can be deleted (RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN). In some cases, a snapshot can be taken of the resource prior to deletion (RemovalPolicy.SNAPSHOT). A list of resources that support this policy can be found in the following link:
cfnPropertyName(cdkPropertyName: string): stringdef cfn_property_name(self, cdk_property_name: str) -> strpublic String cfnPropertyName(String cdkPropertyName)public string CfnPropertyName(string cdkPropertyName)func CfnPropertyName(CdkPropertyName *string) *string#getAtt(attributeName: string, typeHint?: ResolutionTypeHint): Referencedef get_att(self, attribute_name: str, type_hint: typing.Optional[ResolutionTypeHint] = None) -> Referencepublic Reference getAtt(String attributeName, ResolutionTypeHint typeHint)public Reference GetAtt(string attributeName, ResolutionTypeHint? typeHint = null)func GetAtt(AttributeName *string, TypeHint ResolutionTypeHint) Reference#Ideally, use generated attribute accessors (e.g. resource.arn), but this can be used for future compatibility in case there is no generated attribute.
1 parameter
Parameters
attributeNameattribute_nameattributeNameattributeNameAttributeName— The name of the attribute.
getMetadata(key: string): anydef get_metadata(self, key: str) -> Anypublic Object getMetadata(String key)public object GetMetadata(string key)func GetMetadata(Key *string) interface{}#inspect(inspector: TreeInspector): voiddef inspect(self, inspector: TreeInspector) -> Nonepublic void inspect(TreeInspector inspector)public void Inspect(TreeInspector inspector)func Inspect(Inspector TreeInspector)#1 parameter
Parameters
inspectorinspectorinspectorinspectorInspector— tree inspector to collect and process attributes.
isCfnElement(x: any): boolean@staticmethod def is_cfn_element(x: Any) -> boolpublic static Boolean isCfnElement(Object x)public static bool IsCfnElement(object x)func IsCfnElement(X interface{}) *boolstatic#Uses duck-typing instead of instanceof to allow stack elements from different versions of this library to be included in the same stack.
returns
Returns: The construct as a stack element or undefined if it is not a stack element.
isCfnResource(x: any): boolean@staticmethod def is_cfn_resource(x: Any) -> boolpublic static Boolean isCfnResource(Object x)public static bool IsCfnResource(object x)func IsCfnResource(X interface{}) *boolstatic#isCfnSecurityGroupIngress(x: any): boolean@staticmethod def is_cfn_security_group_ingress(x: Any) -> boolpublic static Boolean isCfnSecurityGroupIngress(Object x)public static bool IsCfnSecurityGroupIngress(object x)func IsCfnSecurityGroupIngress(X interface{}) *boolstatic#isConstruct(x: any): boolean@staticmethod def is_construct(x: Any) -> boolpublic static Boolean isConstruct(Object x)public static bool IsConstruct(object x)func IsConstruct(X interface{}) *boolstatic#notes · 1 parameter · returns
Use this method instead of instanceof to properly detect Construct instances, even when the construct library is symlinked.
Explanation: in JavaScript, multiple copies of the constructs library on disk are seen as independent, completely different libraries. As a consequence, the class Construct in each copy of the constructs library is seen as a different class, and an instance of one class will not test as instanceof the other class. npm install will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the constructs library can be accidentally installed, and instanceof will behave unpredictably. It is safest to avoid using instanceof, and using this type-testing method instead.
Parameters
xxxxX— Any object.
Returns: true if x is an object created from a class which extends Construct.
obtainDependencies(): Stack | CfnResource[]def obtain_dependencies(self, ) -> typing.List[typing.Union[Stack, CfnResource]]public List<Stack> obtainDependencies()public Stack[] ObtainDependencies()func ObtainDependencies() *[]interface{}#For resources depended on directly, returns the CfnResource object. For dependencies on other stacks, returns the Stack object. The order of the array is not guaranteed.
overrideLogicalId(newLogicalId: string): voiddef override_logical_id(self, new_logical_id: str) -> Nonepublic void overrideLogicalId(String newLogicalId)public void OverrideLogicalId(string newLogicalId)func OverrideLogicalId(NewLogicalId *string)#1 parameter
Parameters
newLogicalIdnew_logical_idnewLogicalIdnewLogicalIdNewLogicalId— The new logical ID to use for this stack element.
removeDependency(target: CfnResource): voiddef remove_dependency(self, target: CfnResource) -> Nonepublic void removeDependency(CfnResource target)public void RemoveDependency(CfnResource target)func RemoveDependency(Target CfnResource)deprecated#This can be used for resources across stacks (including nested stacks) and the dependency will automatically be removed from the relevant scope.
removeResourceDependency(target: CfnResource): voiddef remove_resource_dependency(self, target: CfnResource) -> Nonepublic void removeResourceDependency(CfnResource target)public void RemoveResourceDependency(CfnResource target)func RemoveResourceDependency(Target CfnResource)#This can be used for resources across stacks (including nested stacks) and the dependency will automatically be removed from the relevant scope.
replaceDependency(target: CfnResource, newTarget: CfnResource): voiddef replace_dependency(self, target: CfnResource, new_target: CfnResource) -> Nonepublic void replaceDependency(CfnResource target, CfnResource newTarget)public void ReplaceDependency(CfnResource target, CfnResource newTarget)func ReplaceDependency(Target CfnResource, NewTarget CfnResource)#2 parameters
Parameters
targettargettargettargetTarget— The dependency to replace.newTargetnew_targetnewTargetnewTargetNewTarget— The new dependency to add.
toString(): stringdef to_string(self, ) -> strpublic String toString()public string ToString()func ToString() *string#returns
Returns: a string representation of this resource
with(...mixins: IMixin[]): IConstructdef with(self, mixins: IMixin) -> IConstructpublic IConstruct with(IMixin mixins)public IConstruct With(IMixin mixins)func With(Mixins IMixin) IConstruct#Mixins are applied in order. The list of constructs is captured at the start of the call, so constructs added by a mixin will not be visited. Use multiple with() calls if subsequent mixins should apply to added constructs.