Note:

You are viewing the documentation for an older major version of the AWS CLI (version 1).

AWS CLI version 2, the latest major version of AWS CLI, is now stable and recommended for general use. To view this page for the AWS CLI version 2, click here. For more information see the AWS CLI version 2 installation instructions and migration guide.

[ aws . ec2 ]

provision-byoip-cidr

Description

Provisions an IPv4 or IPv6 address range for use with your Amazon Web Services resources through bring your own IP addresses (BYOIP) and creates a corresponding address pool. After the address range is provisioned, it is ready to be advertised using AdvertiseByoipCidr .

Amazon Web Services verifies that you own the address range and are authorized to advertise it. You must ensure that the address range is registered to you and that you created an RPKI ROA to authorize Amazon ASNs 16509 and 14618 to advertise the address range. For more information, see Bring your own IP addresses (BYOIP) in the Amazon EC2 User Guide .

Provisioning an address range is an asynchronous operation, so the call returns immediately, but the address range is not ready to use until its status changes from pending-provision to provisioned . To monitor the status of an address range, use DescribeByoipCidrs . To allocate an Elastic IP address from your IPv4 address pool, use AllocateAddress with either the specific address from the address pool or the ID of the address pool.

See also: AWS API Documentation

Synopsis

  provision-byoip-cidr
--cidr <value>
[--cidr-authorization-context <value>]
[--publicly-advertisable | --no-publicly-advertisable]
[--description <value>]
[--dry-run | --no-dry-run]
[--pool-tag-specifications <value>]
[--multi-region | --no-multi-region]
[--network-border-group <value>]
[--cli-input-json <value>]
[--generate-cli-skeleton <value>]
[--debug]
[--endpoint-url <value>]
[--no-verify-ssl]
[--no-paginate]
[--output <value>]
[--query <value>]
[--profile <value>]
[--region <value>]
[--version <value>]
[--color <value>]
[--no-sign-request]
[--ca-bundle <value>]
[--cli-read-timeout <value>]
[--cli-connect-timeout <value>]

Options

--cidr (string)

The public IPv4 or IPv6 address range, in CIDR notation. The most specific IPv4 prefix that you can specify is /24. The most specific IPv6 address range that you can bring is /48 for CIDRs that are publicly advertisable and /56 for CIDRs that are not publicly advertisable. The address range cannot overlap with another address range that you've brought to this or another Region.

--cidr-authorization-context (structure)

A signed document that proves that you are authorized to bring the specified IP address range to Amazon using BYOIP.

Message -> (string)

The plain-text authorization message for the prefix and account.

Signature -> (string)

The signed authorization message for the prefix and account.

Shorthand Syntax:

Message=string,Signature=string

JSON Syntax:

{
  "Message": "string",
  "Signature": "string"
}

--publicly-advertisable | --no-publicly-advertisable (boolean)

(IPv6 only) Indicate whether the address range will be publicly advertised to the internet.

Default: true

--description (string)

A description for the address range and the address pool.

--dry-run | --no-dry-run (boolean)

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation . Otherwise, it is UnauthorizedOperation .

--pool-tag-specifications (list)

The tags to apply to the address pool.

(structure)

The tags to apply to a resource when the resource is being created. When you specify a tag, you must specify the resource type to tag, otherwise the request will fail.

Note

The Valid Values lists all the resource types that can be tagged. However, the action you're using might not support tagging all of these resource types. If you try to tag a resource type that is unsupported for the action you're using, you'll get an error.

ResourceType -> (string)

The type of resource to tag on creation.

Tags -> (list)

The tags to apply to the resource.

(structure)

Describes a tag.

Key -> (string)

The key of the tag.

Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws: .

Value -> (string)

The value of the tag.

Constraints: Tag values are case-sensitive and accept a maximum of 256 Unicode characters.

Shorthand Syntax:

ResourceType=string,Tags=[{Key=string,Value=string},{Key=string,Value=string}] ...

JSON Syntax:

[
  {
    "ResourceType": "capacity-reservation"|"client-vpn-endpoint"|"customer-gateway"|"carrier-gateway"|"coip-pool"|"declarative-policies-report"|"dedicated-host"|"dhcp-options"|"egress-only-internet-gateway"|"elastic-ip"|"elastic-gpu"|"export-image-task"|"export-instance-task"|"fleet"|"fpga-image"|"host-reservation"|"image"|"import-image-task"|"import-snapshot-task"|"instance"|"instance-event-window"|"internet-gateway"|"ipam"|"ipam-pool"|"ipam-scope"|"ipv4pool-ec2"|"ipv6pool-ec2"|"key-pair"|"launch-template"|"local-gateway"|"local-gateway-route-table"|"local-gateway-virtual-interface"|"local-gateway-virtual-interface-group"|"local-gateway-route-table-vpc-association"|"local-gateway-route-table-virtual-interface-group-association"|"natgateway"|"network-acl"|"network-interface"|"network-insights-analysis"|"network-insights-path"|"network-insights-access-scope"|"network-insights-access-scope-analysis"|"placement-group"|"prefix-list"|"replace-root-volume-task"|"reserved-instances"|"route-table"|"security-group"|"security-group-rule"|"snapshot"|"spot-fleet-request"|"spot-instances-request"|"subnet"|"subnet-cidr-reservation"|"traffic-mirror-filter"|"traffic-mirror-session"|"traffic-mirror-target"|"transit-gateway"|"transit-gateway-attachment"|"transit-gateway-connect-peer"|"transit-gateway-multicast-domain"|"transit-gateway-policy-table"|"transit-gateway-route-table"|"transit-gateway-route-table-announcement"|"volume"|"vpc"|"vpc-endpoint"|"vpc-endpoint-connection"|"vpc-endpoint-service"|"vpc-endpoint-service-permission"|"vpc-peering-connection"|"vpn-connection"|"vpn-gateway"|"vpc-flow-log"|"capacity-reservation-fleet"|"traffic-mirror-filter-rule"|"vpc-endpoint-connection-device-type"|"verified-access-instance"|"verified-access-group"|"verified-access-endpoint"|"verified-access-policy"|"verified-access-trust-provider"|"vpn-connection-device-type"|"vpc-block-public-access-exclusion"|"ipam-resource-discovery"|"ipam-resource-discovery-association"|"instance-connect-endpoint"|"verified-access-endpoint-target"|"ipam-external-resource-verification-token",
    "Tags": [
      {
        "Key": "string",
        "Value": "string"
      }
      ...
    ]
  }
  ...
]

--multi-region | --no-multi-region (boolean)

Reserved.

--network-border-group (string)

If you have Local Zones enabled, you can choose a network border group for Local Zones when you provision and advertise a BYOIPv4 CIDR. Choose the network border group carefully as the EIP and the Amazon Web Services resource it is associated with must reside in the same network border group.

You can provision BYOIP address ranges to and advertise them in the following Local Zone network border groups:

  • us-east-1-dfw-2
  • us-west-2-lax-1
  • us-west-2-phx-2

Note

You cannot provision or advertise BYOIPv6 address ranges in Local Zones at this time.

--cli-input-json (string) Performs service operation based on the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, the CLI values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

Global Options

--debug (boolean)

Turn on debug logging.

--endpoint-url (string)

Override command's default URL with the given URL.

--no-verify-ssl (boolean)

By default, the AWS CLI uses SSL when communicating with AWS services. For each SSL connection, the AWS CLI will verify SSL certificates. This option overrides the default behavior of verifying SSL certificates.

--no-paginate (boolean)

Disable automatic pagination. If automatic pagination is disabled, the AWS CLI will only make one call, for the first page of results.

--output (string)

The formatting style for command output.

  • json
  • text
  • table

--query (string)

A JMESPath query to use in filtering the response data.

--profile (string)

Use a specific profile from your credential file.

--region (string)

The region to use. Overrides config/env settings.

--version (string)

Display the version of this tool.

--color (string)

Turn on/off color output.

  • on
  • off
  • auto

--no-sign-request (boolean)

Do not sign requests. Credentials will not be loaded if this argument is provided.

--ca-bundle (string)

The CA certificate bundle to use when verifying SSL certificates. Overrides config/env settings.

--cli-read-timeout (int)

The maximum socket read time in seconds. If the value is set to 0, the socket read will be blocking and not timeout. The default value is 60 seconds.

--cli-connect-timeout (int)

The maximum socket connect time in seconds. If the value is set to 0, the socket connect will be blocking and not timeout. The default value is 60 seconds.

Examples

Note

To use the following examples, you must have the AWS CLI installed and configured. See the Getting started guide in the AWS CLI User Guide for more information.

Unless otherwise stated, all examples have unix-like quotation rules. These examples will need to be adapted to your terminal's quoting rules. See Using quotation marks with strings in the AWS CLI User Guide .

To provision an address range

The following provision-byoip-cidr example provisions a public IP address range for use with AWS.

aws ec2 provision-byoip-cidr \
    --cidr 203.0.113.25/24 \
    --cidr-authorization-context Message="$text_message",Signature="$signed_message"

Output:

{
    "ByoipCidr": {
        "Cidr": "203.0.113.25/24",
        "State": "pending-provision"
    }
}

For more information about creating the messages strings for the authorization context, see Bring Your Own IP Addresses in the Amazon EC2 User Guide.

Output

ByoipCidr -> (structure)

Information about the address range.

Cidr -> (string)

The address range, in CIDR notation.

Description -> (string)

The description of the address range.

AsnAssociations -> (list)

The BYOIP CIDR associations with ASNs.

(structure)

An Autonomous System Number (ASN) and BYOIP CIDR association.

Asn -> (string)

The association's ASN.

Cidr -> (string)

The association's CIDR.

StatusMessage -> (string)

The association's status message.

State -> (string)

The association's state.

StatusMessage -> (string)

Upon success, contains the ID of the address pool. Otherwise, contains an error message.

State -> (string)

The state of the address range.

  • advertised : The address range is being advertised to the internet by Amazon Web Services.
  • deprovisioned : The address range is deprovisioned.
  • failed-deprovision : The request to deprovision the address range was unsuccessful. Ensure that all EIPs from the range have been deallocated and try again.
  • failed-provision : The request to provision the address range was unsuccessful.
  • pending-deprovision : You’ve submitted a request to deprovision an address range and it's pending.
  • pending-provision : You’ve submitted a request to provision an address range and it's pending.
  • provisioned : The address range is provisioned and can be advertised. The range is not currently advertised.
  • provisioned-not-publicly-advertisable : The address range is provisioned and cannot be advertised.

NetworkBorderGroup -> (string)

If you have Local Zones enabled, you can choose a network border group for Local Zones when you provision and advertise a BYOIPv4 CIDR. Choose the network border group carefully as the EIP and the Amazon Web Services resource it is associated with must reside in the same network border group.

You can provision BYOIP address ranges to and advertise them in the following Local Zone network border groups:

  • us-east-1-dfw-2
  • us-west-2-lax-1
  • us-west-2-phx-2

Note

You cannot provision or advertise BYOIPv6 address ranges in Local Zones at this time.