Note:

You are viewing the documentation for an older major version of the AWS CLI (version 1).

AWS CLI version 2, the latest major version of AWS CLI, is now stable and recommended for general use. To view this page for the AWS CLI version 2, click here. For more information see the AWS CLI version 2 installation instructions and migration guide.

[ aws . personalize ]

create-recommender¶

Description¶

Creates a recommender with the recipe (a Domain dataset group use case) you specify. You create recommenders for a Domain dataset group and specify the recommender's Amazon Resource Name (ARN) when you make a GetRecommendations request.

Minimum recommendation requests per second

Warning

A high minRecommendationRequestsPerSecond will increase your bill. We recommend starting with 1 for minRecommendationRequestsPerSecond (the default). Track your usage using Amazon CloudWatch metrics, and increase the minRecommendationRequestsPerSecond as necessary.

When you create a recommender, you can configure the recommender's minimum recommendation requests per second. The minimum recommendation requests per second (minRecommendationRequestsPerSecond ) specifies the baseline recommendation request throughput provisioned by Amazon Personalize. The default minRecommendationRequestsPerSecond is 1 . A recommendation request is a single GetRecommendations operation. Request throughput is measured in requests per second and Amazon Personalize uses your requests per second to derive your requests per hour and the price of your recommender usage.

If your requests per second increases beyond minRecommendationRequestsPerSecond , Amazon Personalize auto-scales the provisioned capacity up and down, but never below minRecommendationRequestsPerSecond . There's a short time delay while the capacity is increased that might cause loss of requests.

Your bill is the greater of either the minimum requests per hour (based on minRecommendationRequestsPerSecond) or the actual number of requests. The actual request throughput used is calculated as the average requests/second within a one-hour window. We recommend starting with the default minRecommendationRequestsPerSecond , track your usage using Amazon CloudWatch metrics, and then increase the minRecommendationRequestsPerSecond as necessary.

Status

A recommender can be in one of the following states:

CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED
STOP PENDING > STOP IN_PROGRESS > INACTIVE > START PENDING > START IN_PROGRESS > ACTIVE
DELETE PENDING > DELETE IN_PROGRESS

To get the recommender status, call DescribeRecommender .

Note

Wait until the status of the recommender is ACTIVE before asking the recommender for recommendations.

Related APIs

Synopsis¶

  create-recommender
--name <value>
--dataset-group-arn <value>
--recipe-arn <value>
[--recommender-config <value>]
[--tags <value>]
[--cli-input-json <value>]
[--generate-cli-skeleton <value>]
[--debug]
[--endpoint-url <value>]
[--no-verify-ssl]
[--no-paginate]
[--output <value>]
[--query <value>]
[--profile <value>]
[--region <value>]
[--version <value>]
[--color <value>]
[--no-sign-request]
[--ca-bundle <value>]
[--cli-read-timeout <value>]
[--cli-connect-timeout <value>]

Options¶

--name (string)

The name of the recommender.

--dataset-group-arn (string)

The Amazon Resource Name (ARN) of the destination domain dataset group for the recommender.

--recipe-arn (string)

The Amazon Resource Name (ARN) of the recipe that the recommender will use. For a recommender, a recipe is a Domain dataset group use case. Only Domain dataset group use cases can be used to create a recommender. For information about use cases see Choosing recommender use cases .

--recommender-config (structure)

The configuration details of the recommender.

itemExplorationConfig -> (map)

Specifies the exploration configuration hyperparameters, including explorationWeight and explorationItemAgeCutOff , you want to use to configure the amount of item exploration Amazon Personalize uses when recommending items. Provide itemExplorationConfig data only if your recommenders generate personalized recommendations for a user (not popular items or similar items).

key -> (string)

value -> (string)

minRecommendationRequestsPerSecond -> (integer)

Specifies the requested minimum provisioned recommendation requests per second that Amazon Personalize will support. A high minRecommendationRequestsPerSecond will increase your bill. We recommend starting with 1 for minRecommendationRequestsPerSecond (the default). Track your usage using Amazon CloudWatch metrics, and increase the minRecommendationRequestsPerSecond as necessary.

trainingDataConfig -> (structure)

Specifies the training data configuration to use when creating a domain recommender.

excludedDatasetColumns -> (map)

Specifies the columns to exclude from training. Each key is a dataset type, and each value is a list of columns. Exclude columns to control what data Amazon Personalize uses to generate recommendations.

For example, you might have a column that you want to use only to filter recommendations. You can exclude this column from training and Amazon Personalize considers it only when filtering.

key -> (string)

value -> (list)

(string)

enableMetadataWithRecommendations -> (boolean)

Whether metadata with recommendations is enabled for the recommender. If enabled, you can specify the columns from your Items dataset in your request for recommendations. Amazon Personalize returns this data for each item in the recommendation response. For information about enabling metadata for a recommender, see Enabling metadata in recommendations for a recommender .

If you enable metadata in recommendations, you will incur additional costs. For more information, see Amazon Personalize pricing .

Shorthand Syntax:

itemExplorationConfig={KeyName1=string,KeyName2=string},minRecommendationRequestsPerSecond=integer,trainingDataConfig={excludedDatasetColumns={KeyName1=[string,string],KeyName2=[string,string]}},enableMetadataWithRecommendations=boolean

JSON Syntax:

{
  "itemExplorationConfig": {"string": "string"
    ...},
  "minRecommendationRequestsPerSecond": integer,
  "trainingDataConfig": {
    "excludedDatasetColumns": {"string": ["string", ...]
      ...}
  },
  "enableMetadataWithRecommendations": true|false
}

--tags (list)

A list of tags to apply to the recommender.

(structure)

The optional metadata that you apply to resources to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define. For more information see Tagging Amazon Personalize resources .

tagKey -> (string)

One part of a key-value pair that makes up a tag. A key is a general label that acts like a category for more specific tag values.

tagValue -> (string)

The optional part of a key-value pair that makes up a tag. A value acts as a descriptor within a tag category (key).

Shorthand Syntax:

tagKey=string,tagValue=string ...

JSON Syntax:

[
  {
    "tagKey": "string",
    "tagValue": "string"
  }
  ...
]

--cli-input-json (string) Performs service operation based on the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, the CLI values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

Global Options¶

--debug (boolean)

Turn on debug logging.

--endpoint-url (string)

Override command's default URL with the given URL.

--no-verify-ssl (boolean)

By default, the AWS CLI uses SSL when communicating with AWS services. For each SSL connection, the AWS CLI will verify SSL certificates. This option overrides the default behavior of verifying SSL certificates.

--no-paginate (boolean)

Disable automatic pagination. If automatic pagination is disabled, the AWS CLI will only make one call, for the first page of results.

--output (string)

The formatting style for command output.

json
text
table

--query (string)

A JMESPath query to use in filtering the response data.

--profile (string)

Use a specific profile from your credential file.

--region (string)

The region to use. Overrides config/env settings.

--version (string)

Display the version of this tool.

--color (string)

Turn on/off color output.

on
off
auto

--no-sign-request (boolean)

Do not sign requests. Credentials will not be loaded if this argument is provided.

--ca-bundle (string)

The CA certificate bundle to use when verifying SSL certificates. Overrides config/env settings.

--cli-read-timeout (int)

The maximum socket read time in seconds. If the value is set to 0, the socket read will be blocking and not timeout. The default value is 60 seconds.

--cli-connect-timeout (int)

The maximum socket connect time in seconds. If the value is set to 0, the socket connect will be blocking and not timeout. The default value is 60 seconds.

Output¶

recommenderArn -> (string)

The Amazon Resource Name (ARN) of the recommender.

Table Of Contents

Feedback

User Guide