Installing or updating to the latest version of the AWS CLI

Guided installation steps

1. Download the installation file in one of the following ways:

   • Use the curl command – The -o option specifies the file name that the downloaded package is written to. The options on the following example command write the downloaded file to the current directory with the local name awscliv2.zip.

     $ curl "https://awscli.amazonaws.com/awscli-exe-linux-x86_64.zip" -o "awscliv2.zip"

   • Downloading from the URL – To download the installer with your browser, use the following URL: https://awscli.amazonaws.com/awscli-exe-linux-x86_64.zip

2. (Optional) Verifying the integrity of your downloaded zip file

   If you chose to manually download the AWS CLI installer package .zip in the above steps, you can use the following steps to verify the signatures by using the GnuPG tool.

   The AWS CLI installer package .zip files are cryptographically signed using PGP signatures. If there is any damage or alteration of the files, this verification fails and you should not proceed with installation.

   1. Download and install the gpg command using your package manager. For more information about GnuPG, see the GnuPG website.

   2. To create the public key file, create a text file and paste in the following text.

      -----BEGIN PGP PUBLIC KEY BLOCK-----
      
      mQINBF2Cr7UBEADJZHcgusOJl7ENSyumXh85z0TRV0xJorM2B/JL0kHOyigQluUG
      ZMLhENaG0bYatdrKP+3H91lvK050pXwnO/R7fB/FSTouki4ciIx5OuLlnJZIxSzx
      PqGl0mkxImLNbGWoi6Lto0LYxqHN2iQtzlwTVmq9733zd3XfcXrZ3+LblHAgEt5G
      TfNxEKJ8soPLyWmwDH6HWCnjZ/aIQRBTIQ05uVeEoYxSh6wOai7ss/KveoSNBbYz
      gbdzoqI2Y8cgH2nbfgp3DSasaLZEdCSsIsK1u05CinE7k2qZ7KgKAUIcT/cR/grk
      C6VwsnDU0OUCideXcQ8WeHutqvgZH1JgKDbznoIzeQHJD238GEu+eKhRHcz8/jeG
      94zkcgJOz3KbZGYMiTh277Fvj9zzvZsbMBCedV1BTg3TqgvdX4bdkhf5cH+7NtWO
      lrFj6UwAsGukBTAOxC0l/dnSmZhJ7Z1KmEWilro/gOrjtOxqRQutlIqG22TaqoPG
      fYVN+en3Zwbt97kcgZDwqbuykNt64oZWc4XKCa3mprEGC3IbJTBFqglXmZ7l9ywG
      EEUJYOlb2XrSuPWml39beWdKM8kzr1OjnlOm6+lpTRCBfo0wa9F8YZRhHPAkwKkX
      XDeOGpWRj4ohOx0d2GWkyV5xyN14p2tQOCdOODmz80yUTgRpPVQUtOEhXQARAQAB
      tCFBV1MgQ0xJIFRlYW0gPGF3cy1jbGlAYW1hem9uLmNvbT6JAlQEEwEIAD4CGwMF
      CwkIBwIGFQoJCAsCBBYCAwECHgECF4AWIQT7Xbd/1cEYuAURraimMQrMRnJHXAUC
      ZqFYbwUJCv/cOgAKCRCmMQrMRnJHXKYuEAC+wtZ611qQtOl0t5spM9SWZuszbcyA
      0xBAJq2pncnp6wdCOkuAPu4/R3UCIoD2C49MkLj9Y0Yvue8CCF6OIJ8L+fKBv2DI
      yWZGmHL0p9wa/X8NCKQrKxK1gq5PuCzi3f3SqwfbZuZGeK/ubnmtttWXpUtuU/Iz
      VR0u/0sAy3j4uTGKh2cX7XnZbSqgJhUk9H324mIJiSwzvw1Ker6xtH/LwdBeJCck
      bVBdh3LZis4zuD4IZeBO1vRvjot3Oq4xadUv5RSPATg7T1kivrtLCnwvqc6L4LnF
      0OkNysk94L3LQSHyQW2kQS1cVwr+yGUSiSp+VvMbAobAapmMJWP6e/dKyAUGIX6+
      2waLdbBs2U7MXznx/2ayCLPH7qCY9cenbdj5JhG9ibVvFWqqhSo22B/URQE/CMrG
      +3xXwtHEBoMyWEATr1tWwn2yyQGbkUGANneSDFiTFeoQvKNyyCFTFO1F2XKCcuDs
      19nj34PE2TJilTG2QRlMr4D0NgwLLAMg2Los1CK6nXWnImYHKuaKS9LVaCoC8vu7
      IRBik1NX6SjrQnftk0M9dY+s0ZbAN1gbdjZ8H3qlbl/4TxMdr87m8LP4FZIIo261
      Eycv34pVkCePZiP+dgamEiQJ7IL4ZArio9mv6HbDGV6mLY45+l6/0EzCwkI5IyIf
      BfWC9s/USgxchg==
      =ptgS
      -----END PGP PUBLIC KEY BLOCK-----

      For reference, the following are the details of the public key.

      Key ID:           A6310ACC4672475C
      Type:             RSA
      Size:             4096/4096
      Created:          2019-09-18
      Expires:          2025-07-24
      User ID:          AWS CLI Team <aws-cli@amazon.com>
      Key fingerprint:  FB5D B77F D5C1 18B8 0511  ADA8 A631 0ACC 4672 475C

   3. Import the AWS CLI public key with the following command, substituting public-key-file-name with the file name of the public key you created.

      $ gpg --import public-key-file-name
      gpg: /home/username/.gnupg/trustdb.gpg: trustdb created
      gpg: key A6310ACC4672475C: public key "AWS CLI Team <aws-cli@amazon.com>" imported
      gpg: Total number processed: 1
      gpg:               imported: 1

   4. Download the AWS CLI signature file for the package you downloaded. It has the same path and name as the .zip file it corresponds to, but has the extension .sig. In the following examples, we save it to the current directory as a file named awscliv2.sig.

      For the latest version of the AWS CLI, use the following command block:

      $ curl -o awscliv2.sig https://awscli.amazonaws.com/awscli-exe-linux-x86_64.zip.sig

      For a specific version of the AWS CLI, append a hyphen and the version number to the filename. For this example the filename for version 2.0.30 would be awscli-exe-linux-x86_64-2.0.30.zip.sig resulting in the following command:

      $ curl -o awscliv2.sig https://awscli.amazonaws.com/awscli-exe-linux-x86_64-2.0.30.zip.sig

      For a list of versions, see the AWS CLI version 2 Changelog on GitHub.

   5. Verify the signature, passing both the downloaded .sig and .zip file names as parameters to the gpg command.

      $ gpg --verify awscliv2.sig awscliv2.zip

      The output should look similar to the following.

      gpg: Signature made Mon Nov  4 19:00:01 2019 PST
      gpg:                using RSA key FB5D B77F D5C1 18B8 0511 ADA8 A631 0ACC 4672 475C
      gpg: Good signature from "AWS CLI Team <aws-cli@amazon.com>" [unknown]
      gpg: WARNING: This key is not certified with a trusted signature!
      gpg:          There is no indication that the signature belongs to the owner.
      Primary key fingerprint: FB5D B77F D5C1 18B8 0511  ADA8 A631 0ACC 4672 475C

      Important

      The warning in the output is expected and doesn't indicate a problem. It occurs because there isn't a chain of trust between your personal PGP key (if you have one) and the AWS CLI PGP key. For more information, see Web of trust.

3. Unzip the installer. If your Linux distribution doesn't have a built-in unzip command, use an equivalent to unzip it. The following example command unzips the package and creates a directory named aws under the current directory.

   $ unzip awscliv2.zip

   Note

   When updating from a previous version, the unzip command prompts to overwrite existing files. To skip these prompts, such as with script automation, use the -u update flag for unzip. This flag automatically updates existing files and creates new ones as needed.

   $ unzip -u awscliv2.zip

4. Run the install program. The installation command uses a file named install in the newly unzipped aws directory. By default, the files are all installed to /usr/local/aws-cli, and a symbolic link is created in /usr/local/bin. The command includes sudo to grant write permissions to those directories.

   $ sudo ./aws/install

   You can install without sudo if you specify directories that you already have write permissions to. Use the following instructions for the install command to specify the installation location:

   • Ensure that the paths you provide to the -i and -b parameters contain no volume name or directory names that contain any space characters or other white space characters. If there is a space, the installation fails.

   • --install-dir or -i – This option specifies the directory to copy all of the files to.

     The default value is /usr/local/aws-cli.

   • --bin-dir or -b – This option specifies that the main aws program in the install directory is symbolically linked to the file aws in the specified path. You must have write permissions to the specified directory. Creating a symlink to a directory that is already in your path eliminates the need to add the install directory to the user's $PATH variable.

     The default value is /usr/local/bin.

   $ ./aws/install -i /usr/local/aws-cli -b /usr/local/bin

   Note

   To update your current installation of the AWS CLI, add your existing symlink and installer information to construct the install command with the --update parameter.

   $ sudo ./aws/install --bin-dir /usr/local/bin --install-dir /usr/local/aws-cli --update

   To locate the existing symlink and installation directory, use the following steps:

   1. Use the which command to find your symlink. This gives you the path to use with the --bin-dir parameter.

      $ which aws
      /usr/local/bin/aws

   2. Use the ls command to find the directory that your symlink points to. This gives you the path to use with the --install-dir parameter.

      $ ls -l /usr/local/bin/aws
      lrwxrwxrwx 1 ec2-user ec2-user 49 Oct 22 09:49 /usr/local/bin/aws -> /usr/local/aws-cli/v2/current/bin/aws

5. Confirm the installation with the following command.

   $ aws --version
   aws-cli/2.19.1 Python/3.11.6 Linux/5.10.205-195.807.amzn2.x86_64 botocore/2.4.5

   If the aws command cannot be found, you might need to restart your terminal or follow the troubleshooting in Troubleshooting errors for the AWS CLI.

Guided installation steps

1. Download the installation file in one of the following ways:

   • Use the curl command – The -o option specifies the file name that the downloaded package is written to. The options on the following example command write the downloaded file to the current directory with the local name awscliv2.zip.

     $ curl "https://awscli.amazonaws.com/awscli-exe-linux-aarch64.zip" -o "awscliv2.zip"

   • Downloading from the URL – To download the installer with your browser, use the following URL: https://awscli.amazonaws.com/awscli-exe-linux-aarch64.zip

2. (Optional) Verifying the integrity of your downloaded zip file

   If you chose to manually download the AWS CLI installer package .zip in the above steps, you can use the following steps to verify the signatures by using the GnuPG tool.

   The AWS CLI installer package .zip files are cryptographically signed using PGP signatures. If there is any damage or alteration of the files, this verification fails and you should not proceed with installation.

   1. Download and install the gpg command using your package manager. For more information about GnuPG, see the GnuPG website.

   2. To create the public key file, create a text file and paste in the following text.

      -----BEGIN PGP PUBLIC KEY BLOCK-----
      
      mQINBF2Cr7UBEADJZHcgusOJl7ENSyumXh85z0TRV0xJorM2B/JL0kHOyigQluUG
      ZMLhENaG0bYatdrKP+3H91lvK050pXwnO/R7fB/FSTouki4ciIx5OuLlnJZIxSzx
      PqGl0mkxImLNbGWoi6Lto0LYxqHN2iQtzlwTVmq9733zd3XfcXrZ3+LblHAgEt5G
      TfNxEKJ8soPLyWmwDH6HWCnjZ/aIQRBTIQ05uVeEoYxSh6wOai7ss/KveoSNBbYz
      gbdzoqI2Y8cgH2nbfgp3DSasaLZEdCSsIsK1u05CinE7k2qZ7KgKAUIcT/cR/grk
      C6VwsnDU0OUCideXcQ8WeHutqvgZH1JgKDbznoIzeQHJD238GEu+eKhRHcz8/jeG
      94zkcgJOz3KbZGYMiTh277Fvj9zzvZsbMBCedV1BTg3TqgvdX4bdkhf5cH+7NtWO
      lrFj6UwAsGukBTAOxC0l/dnSmZhJ7Z1KmEWilro/gOrjtOxqRQutlIqG22TaqoPG
      fYVN+en3Zwbt97kcgZDwqbuykNt64oZWc4XKCa3mprEGC3IbJTBFqglXmZ7l9ywG
      EEUJYOlb2XrSuPWml39beWdKM8kzr1OjnlOm6+lpTRCBfo0wa9F8YZRhHPAkwKkX
      XDeOGpWRj4ohOx0d2GWkyV5xyN14p2tQOCdOODmz80yUTgRpPVQUtOEhXQARAQAB
      tCFBV1MgQ0xJIFRlYW0gPGF3cy1jbGlAYW1hem9uLmNvbT6JAlQEEwEIAD4CGwMF
      CwkIBwIGFQoJCAsCBBYCAwECHgECF4AWIQT7Xbd/1cEYuAURraimMQrMRnJHXAUC
      ZqFYbwUJCv/cOgAKCRCmMQrMRnJHXKYuEAC+wtZ611qQtOl0t5spM9SWZuszbcyA
      0xBAJq2pncnp6wdCOkuAPu4/R3UCIoD2C49MkLj9Y0Yvue8CCF6OIJ8L+fKBv2DI
      yWZGmHL0p9wa/X8NCKQrKxK1gq5PuCzi3f3SqwfbZuZGeK/ubnmtttWXpUtuU/Iz
      VR0u/0sAy3j4uTGKh2cX7XnZbSqgJhUk9H324mIJiSwzvw1Ker6xtH/LwdBeJCck
      bVBdh3LZis4zuD4IZeBO1vRvjot3Oq4xadUv5RSPATg7T1kivrtLCnwvqc6L4LnF
      0OkNysk94L3LQSHyQW2kQS1cVwr+yGUSiSp+VvMbAobAapmMJWP6e/dKyAUGIX6+
      2waLdbBs2U7MXznx/2ayCLPH7qCY9cenbdj5JhG9ibVvFWqqhSo22B/URQE/CMrG
      +3xXwtHEBoMyWEATr1tWwn2yyQGbkUGANneSDFiTFeoQvKNyyCFTFO1F2XKCcuDs
      19nj34PE2TJilTG2QRlMr4D0NgwLLAMg2Los1CK6nXWnImYHKuaKS9LVaCoC8vu7
      IRBik1NX6SjrQnftk0M9dY+s0ZbAN1gbdjZ8H3qlbl/4TxMdr87m8LP4FZIIo261
      Eycv34pVkCePZiP+dgamEiQJ7IL4ZArio9mv6HbDGV6mLY45+l6/0EzCwkI5IyIf
      BfWC9s/USgxchg==
      =ptgS
      -----END PGP PUBLIC KEY BLOCK-----

      For reference, the following are the details of the public key.

      Key ID:           A6310ACC4672475C
      Type:             RSA
      Size:             4096/4096
      Created:          2019-09-18
      Expires:          2025-07-24
      User ID:          AWS CLI Team <aws-cli@amazon.com>
      Key fingerprint:  FB5D B77F D5C1 18B8 0511  ADA8 A631 0ACC 4672 475C

   3. Import the AWS CLI public key with the following command, substituting public-key-file-name with the file name of the public key you created.

      $ gpg --import public-key-file-name
      gpg: /home/username/.gnupg/trustdb.gpg: trustdb created
      gpg: key A6310ACC4672475C: public key "AWS CLI Team <aws-cli@amazon.com>" imported
      gpg: Total number processed: 1
      gpg:               imported: 1

   4. Download the AWS CLI signature file for the package you downloaded. It has the same path and name as the .zip file it corresponds to, but has the extension .sig. In the following examples, we save it to the current directory as a file named awscliv2.sig.

      For the latest version of the AWS CLI, use the following command block:

      $ curl -o awscliv2.sig https://awscli.amazonaws.com/awscli-exe-linux-aarch64.zip.sig

      For a specific version of the AWS CLI, append a hyphen and the version number to the filename. For this example the filename for version 2.0.30 would be awscli-exe-linux-aarch64-2.0.30.zip.sig resulting in the following command:

      $ curl -o awscliv2.sig https://awscli.amazonaws.com/awscli-exe-linux-aarch64-2.0.30.zip.sig

      For a list of versions, see the AWS CLI version 2 Changelog on GitHub.

   5. Verify the signature, passing both the downloaded .sig and .zip file names as parameters to the gpg command.

      $ gpg --verify awscliv2.sig awscliv2.zip

      The output should look similar to the following.

      gpg: Signature made Mon Nov  4 19:00:01 2019 PST
      gpg:                using RSA key FB5D B77F D5C1 18B8 0511 ADA8 A631 0ACC 4672 475C
      gpg: Good signature from "AWS CLI Team <aws-cli@amazon.com>" [unknown]
      gpg: WARNING: This key is not certified with a trusted signature!
      gpg:          There is no indication that the signature belongs to the owner.
      Primary key fingerprint: FB5D B77F D5C1 18B8 0511  ADA8 A631 0ACC 4672 475C

      Important

      The warning in the output is expected and doesn't indicate a problem. It occurs because there isn't a chain of trust between your personal PGP key (if you have one) and the AWS CLI PGP key. For more information, see Web of trust.

3. Unzip the installer. If your Linux distribution doesn't have a built-in unzip command, use an equivalent to unzip it. The following example command unzips the package and creates a directory named aws under the current directory.

   $ unzip awscliv2.zip

   Note

   When updating from a previous version, the unzip command prompts to overwrite existing files. To skip these prompts, such as with script automation, use the -u update flag for unzip. This flag automatically updates existing files and creates new ones as needed.

   $ unzip -u awscliv2.zip

4. Run the install program. The installation command uses a file named install in the newly unzipped aws directory. By default, the files are all installed to /usr/local/aws-cli, and a symbolic link is created in /usr/local/bin. The command includes sudo to grant write permissions to those directories.

   $ sudo ./aws/install

   You can install without sudo if you specify directories that you already have write permissions to. Use the following instructions for the install command to specify the installation location:

   • Ensure that the paths you provide to the -i and -b parameters contain no volume name or directory names that contain any space characters or other white space characters. If there is a space, the installation fails.

   • --install-dir or -i – This option specifies the directory to copy all of the files to.

     The default value is /usr/local/aws-cli.

   • --bin-dir or -b – This option specifies that the main aws program in the install directory is symbolically linked to the file aws in the specified path. You must have write permissions to the specified directory. Creating a symlink to a directory that is already in your path eliminates the need to add the install directory to the user's $PATH variable.

     The default value is /usr/local/bin.

   $ ./aws/install -i /usr/local/aws-cli -b /usr/local/bin

   Note

   To update your current installation of the AWS CLI, add your existing symlink and installer information to construct the install command with the --update parameter.

   $ sudo ./aws/install --bin-dir /usr/local/bin --install-dir /usr/local/aws-cli --update

   To locate the existing symlink and installation directory, use the following steps:

   1. Use the which command to find your symlink. This gives you the path to use with the --bin-dir parameter.

      $ which aws
      /usr/local/bin/aws

   2. Use the ls command to find the directory that your symlink points to. This gives you the path to use with the --install-dir parameter.

      $ ls -l /usr/local/bin/aws
      lrwxrwxrwx 1 ec2-user ec2-user 49 Oct 22 09:49 /usr/local/bin/aws -> /usr/local/aws-cli/v2/current/bin/aws

5. Confirm the installation with the following command.

   $ aws --version
   aws-cli/2.19.1 Python/3.11.6 Linux/5.10.205-195.807.amzn2.x86_64 botocore/2.4.5

   If the aws command cannot be found, you might need to restart your terminal or follow the troubleshooting in Troubleshooting errors for the AWS CLI.

1. If your Linux platform does not already have snap installed, install snap on your platform.

   1. For information on installing snap, see Installing the daemon in the Snap documentation.

   2. You may need to restart your system so that your PATH variables are updated correctly. If you are having installation issues, follow steps in Fix common issues in the Snap documentation.

   3. To verify that snap is installed correctly, run the following command.

      $ snap version

2. Run the following snap install command for the AWS CLI.

   $ snap install aws-cli --classic

   Depending on your permissions, you may need to add sudo to the command.

   $ sudo snap install aws-cli --classic

   Note

   To view the snap repository for the AWS CLI, including additional snap instructions, see the aws-cli page in the Canonical Snapcraft website.

3. Verify that the AWS CLI installed correctly.

   $ aws --version
   aws-cli/2.19.1 Python/3.11.6 Linux/5.10.205-195.807.amzn2.x86_64 botocore/2.4.5

   If you get an error, see Troubleshooting errors for the AWS CLI.

The following steps show how to install the latest version of the AWS CLI by using the standard macOS user interface and your browser.

1. In your browser, download the macOS pkg file: https://awscli.amazonaws.com/AWSCLIV2.pkg

2. Run your downloaded file and follow the on-screen instructions. You can choose to install the AWS CLI in the following ways:

   • For all users on the computer (requires sudo)

     • You can install to any folder, or choose the recommended default folder of /usr/local/aws-cli.

     • The installer automatically creates a symlink at /usr/local/bin/aws that links to the main program in the installation folder you chose.

   • For only the current user (doesn't require sudo)

     • You can install to any folder to which you have write permission.

     • Due to standard user permissions, after the installer finishes, you must manually create a symlink file in your $PATH that points to the aws and aws_completer programs by using the following commands at the command prompt. If your $PATH includes a folder you can write to, you can run the following command without sudo if you specify that folder as the target's path. If you don't have a writable folder in your $PATH, you must use sudo in the commands to get permissions to write to the specified target folder. The default location for a symlink is /usr/local/bin/.

       $ sudo ln -s /folder/installed/aws-cli/aws /usr/local/bin/aws
       $ sudo ln -s /folder/installed/aws-cli/aws_completer /usr/local/bin/aws_completer

   Note

   You can view debug logs for the installation by pressing Cmd+L anywhere in the installer. This opens a log pane that enables you to filter and save the log. The log file is also automatically saved to /var/log/install.log.

3. To verify that the shell can find and run the aws command in your $PATH, use the following commands.

   $ which aws
   /usr/local/bin/aws 
   $ aws --version
   aws-cli/2.19.1 Python/3.11.6 Darwin/23.3.0 botocore/2.4.5

   If the aws command cannot be found, you might need to restart your terminal or follow the troubleshooting in Troubleshooting errors for the AWS CLI.

Guided installation instructions

1. Download the file using the curl command. The -o option specifies the file name that the downloaded package is written to. In this example, the file is written to AWSCLIV2.pkg in the current folder.

   $ curl "https://awscli.amazonaws.com/AWSCLIV2.pkg" -o "AWSCLIV2.pkg"

2. Run the standard macOS installer program, specifying the downloaded .pkg file as the source. Use the -pkg parameter to specify the name of the package to install, and the -target / parameter for which drive to install the package to. The files are installed to /usr/local/aws-cli, and a symlink is automatically created in /usr/local/bin. You must include sudo on the command to grant write permissions to those folders.

   $ sudo installer -pkg ./AWSCLIV2.pkg -target /

   After installation is complete, debug logs are written to /var/log/install.log.

3. To verify that the shell can find and run the aws command in your $PATH, use the following commands.

   $ which aws
   /usr/local/bin/aws 
   $ aws --version
   aws-cli/2.19.1 Python/3.11.6 Darwin/23.3.0 botocore/2.4.5

   If the aws command cannot be found, you might need to restart your terminal or follow the troubleshooting in Troubleshooting errors for the AWS CLI.

1. To specify which folder the AWS CLI is installed to, you must create an XML file with any file name. This file is an XML-formatted file that looks like the following example. Leave all values as shown, except you must replace the path /Users/myusername in line 9 with the path to the folder you want the AWS CLI installed to. The folder must already exist, or the command fails. The following XML example, named choices.xml, specifies the installer to install the AWS CLI in the folder /Users/myusername, where it creates a folder named aws-cli.

   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
     <array>
       <dict>
         <key>choiceAttribute</key>
         <string>customLocation</string>
         <key>attributeSetting</key>
         <string>/Users/myusername</string>
         <key>choiceIdentifier</key>
         <string>default</string>
       </dict>
     </array>
   </plist>

2. Download the pkg installer using the curl command. The -o option specifies the file name that the downloaded package is written to. In this example, the file is written to AWSCLIV2.pkg in the current folder.

   $ curl "https://awscli.amazonaws.com/AWSCLIV2.pkg" -o "AWSCLIV2.pkg"

3. Run the standard macOS installer program with the following options:

   • Specify the name of the package to install by using the -pkg parameter.

   • Specify installing to a current user only by setting the -target parameter to CurrentUserHomeDirectory.

   • Specify the path (relative to the current folder) and name of the XML file that you created in the -applyChoiceChangesXML parameter.

   The following example installs the AWS CLI in the folder /Users/myusername/aws-cli.

   $ installer -pkg AWSCLIV2.pkg \
               -target CurrentUserHomeDirectory \
               -applyChoiceChangesXML choices.xml

4. Because standard user permissions typically don't allow writing to folders in your $PATH, the installer in this mode doesn't try to add the symlinks to the aws and aws_completer programs. For the AWS CLI to run correctly, you must manually create the symlinks after the installer finishes. If your $PATH includes a folder you can write to and you specify the folder as the target's path, you can run the following command without sudo. If you don't have a writable folder in your $PATH, you must use sudo for permissions to write to the specified target folder. The default location for a symlink is /usr/local/bin/. Replace folder/installed with the path to your AWS CLI installation.

   $ sudo ln -s /folder/installed/aws-cli/aws /usr/local/bin/aws
   $ sudo ln -s /folder/installed/aws-cli/aws_completer /usr/local/bin/aws_completer

   After installation is complete, debug logs are written to /var/log/install.log.

5. To verify that the shell can find and run the aws command in your $PATH, use the following commands.

   $ which aws
   /usr/local/bin/aws 
   $ aws --version
   aws-cli/2.19.1 Python/3.11.6 Darwin/23.3.0 botocore/2.4.5

   If the aws command cannot be found, you might need to restart your terminal or follow the troubleshooting in Troubleshooting errors for the AWS CLI.