Amazon GameLift examples using AWS CLI
The following code examples show you how to perform actions and implement common scenarios by using the AWS Command Line Interface with Amazon GameLift.
Actions are code excerpts from larger programs and must be run in context. While actions show you how to call individual service functions, you can see actions in context in their related scenarios.
Each example includes a link to the complete source code, where you can find instructions on how to set up and run the code in context.
Topics
Actions
The following code example shows how to use create-build
.
- AWS CLI
-
Example1: To create a game build from files in an S3 bucket
The following
create-build
example creates a custom game build resource. It uses zipped files that are stored in an S3 location in an AWS account that you control. This example assumes that you've already created an IAM role that gives Amazon GameLift permission to access the S3 location. Since the request does not specify an operating system, the new build resource defaults to WINDOWS_2012.aws gamelift create-build \ --storage-location
file://storage-loc.json
\ --nameMegaFrogRaceServer.NA
\ --build-version12345.678
Contents of
storage-loc.json
:{ "Bucket":"MegaFrogRaceServer_NA_build_files" "Key":"MegaFrogRaceServer_build_123.zip" "RoleArn":"arn:aws:iam::123456789012:role/gamelift" }
Output:
{ "Build": { "BuildArn": "arn:aws:gamelift:us-west-2::build/build-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "BuildId": "build-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "CreationTime": 1496708916.18, "Name": "MegaFrogRaceServer.NA", "OperatingSystem": "WINDOWS_2012", "SizeOnDisk": 479303, "Status": "INITIALIZED", "Version": "12345.678" }, "StorageLocation": { "Bucket": "MegaFrogRaceServer_NA_build_files", "Key": "MegaFrogRaceServer_build_123.zip" } }
Example2: To create a game build resource for manually uploading files to GameLift
The following
create-build
example creates a new build resource. It also gets a storage location and temporary credentials that allow you to manually upload your game build to the GameLift location in Amazon S3. Once you've successfully uploaded your build, the GameLift service validates the build and updates the new build's status.aws gamelift create-build \ --name
MegaFrogRaceServer.NA
\ --build-version12345.678
\ --operating-systemAMAZON_LINUX
Output:
{ "Build": { "BuildArn": "arn:aws:gamelift:us-west-2::build/build-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "BuildId": "build-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "CreationTime": 1496708916.18, "Name": "MegaFrogRaceServer.NA", "OperatingSystem": "AMAZON_LINUX", "SizeOnDisk": 0, "Status": "INITIALIZED", "Version": "12345.678" }, "StorageLocation": { "Bucket": "gamelift-builds-us-west-2", "Key": "123456789012/build-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111" }, "UploadCredentials": { "AccessKeyId": "AKIAIOSFODNN7EXAMPLE", "SecretAccessKey": "wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY", "SessionToken": "AgoGb3JpZ2luENz...EXAMPLETOKEN==" } }
For more information, see Upload a Custom Server Build to GameLift in the Amazon GameLift Developer Guide.
-
For API details, see CreateBuild
in AWS CLI Command Reference.
-
The following code example shows how to use create-fleet
.
- AWS CLI
-
Example 1: To create a basic Linux fleet
The following
create-fleet
example creates a minimally configured fleet of on-demand Linux instances to host a custom server build. You can complete the configuration by usingupdate-fleet
.aws gamelift create-fleet \ --name
MegaFrogRaceServer.NA.v2
\ --description 'Hosts for v2 North America
' \ --build-idbuild-1111aaaa-22bb-33cc-44dd-5555eeee66ff
\ --certificate-configuration 'CertificateType=GENERATED
' \ --ec2-instance-typec4.large
\ --fleet-typeON_DEMAND
\ --runtime-configuration 'ServerProcesses=[{LaunchPath=/local/game/release-na/MegaFrogRace_Server.exe,ConcurrentExecutions=1}]
'Output:
{ "FleetAttributes": { "BuildId": "build-1111aaaa-22bb-33cc-44dd-5555eeee66ff", "CertificateConfiguration": { "CertificateType": "GENERATED" }, "CreationTime": 1496365885.44, "Description": "Hosts for v2 North America", "FleetArn": "arn:aws:gamelift:us-west-2:444455556666:fleet/fleet-2222bbbb-33cc-44dd-55ee-6666ffff77aa", "FleetId": "fleet-2222bbbb-33cc-44dd-55ee-6666ffff77aa", "FleetType": "ON_DEMAND", "InstanceType": "c4.large", "MetricGroups": ["default"], "Name": "MegaFrogRace.NA.v2", "NewGameSessionProtectionPolicy": "NoProtection", "OperatingSystem": "AMAZON_LINUX", "ServerLaunchPath": "/local/game/release-na/MegaFrogRace_Server.exe", "Status": "NEW" } }
Example 2: To create a basic Windows fleet
The following
create-fleet
example creates a minimally configured fleet of spot Windows instances to host a custom server build. You can complete the configuration by usingupdate-fleet
.aws gamelift create-fleet \ --name
MegaFrogRace.NA.v2
\ --description 'Hosts for v2 North America
' \ --build-idbuild-2222aaaa-33bb-44cc-55dd-6666eeee77ff
\ --certificate-configuration 'CertificateType=GENERATED
' \ --ec2-instance-typec4.large
\ --fleet-typeSPOT
\ --runtime-configuration 'ServerProcesses=[{LaunchPath=C:\game\Bin64.Release.Dedicated\MegaFrogRace_Server.exe,ConcurrentExecutions=1}]
'Output:
{ "FleetAttributes": { "BuildId": "build-2222aaaa-33bb-44cc-55dd-6666eeee77ff", "CertificateConfiguration": { "CertificateType": "GENERATED" }, "CreationTime": 1496365885.44, "Description": "Hosts for v2 North America", "FleetArn": "arn:aws:gamelift:us-west-2:444455556666:fleet/fleet-2222bbbb-33cc-44dd-55ee-6666ffff77aa", "FleetId": "fleet-2222bbbb-33cc-44dd-55ee-6666ffff77aa", "FleetType": "SPOT", "InstanceType": "c4.large", "MetricGroups": ["default"], "Name": "MegaFrogRace.NA.v2", "NewGameSessionProtectionPolicy": "NoProtection", "OperatingSystem": "WINDOWS_2012", "ServerLaunchPath": "C:\game\Bin64.Release.Dedicated\MegaFrogRace_Server.exe", "Status": "NEW" } }
Example 3: To create a fully configured fleet
The following
create-fleet
example creates a fleet of Spot Windows instances for a custom server build, with most commonly used configuration settings provided.aws gamelift create-fleet \ --name
MegaFrogRace.NA.v2
\ --description 'Hosts for v2 North America
' \ --build-idbuild-2222aaaa-33bb-44cc-55dd-6666eeee77ff
\ --certificate-configuration 'CertificateType=GENERATED
' \ --ec2-instance-typec4.large
\ --ec2-inbound-permissions 'FromPort=33435,ToPort=33435,IpRange=10.24.34.0/23,Protocol=UDP
' \ --fleet-typeSPOT
\ --new-game-session-protection-policyFullProtection
\ --runtime-configurationfile://runtime-config.json
\ --metric-groupsdefault
\ --instance-role-arn 'arn:aws:iam::444455556666:role/GameLiftS3Access
'Contents of
runtime-config.json
:GameSessionActivationTimeoutSeconds=300, MaxConcurrentGameSessionActivations=2, ServerProcesses=[ {LaunchPath=C:\game\Bin64.Release.Dedicated\MegaFrogRace_Server.exe,Parameters=-debug,ConcurrentExecutions=1}, {LaunchPath=C:\game\Bin64.Release.Dedicated\MegaFrogRace_Server.exe,ConcurrentExecutions=1}]
Output:
{ "FleetAttributes": { "InstanceRoleArn": "arn:aws:iam::444455556666:role/GameLiftS3Access", "Status": "NEW", "InstanceType": "c4.large", "FleetArn": "arn:aws:gamelift:us-west-2:444455556666:fleet/fleet-2222bbbb-33cc-44dd-55ee-6666ffff77aa", "FleetId": "fleet-2222bbbb-33cc-44dd-55ee-6666ffff77aa", "Description": "Hosts for v2 North America", "FleetType": "SPOT", "OperatingSystem": "WINDOWS_2012", "Name": "MegaFrogRace.NA.v2", "CreationTime": 1569309011.11, "MetricGroups": [ "default" ], "BuildId": "build-2222aaaa-33bb-44cc-55dd-6666eeee77ff", "ServerLaunchParameters": "abc", "ServerLaunchPath": "C:\\game\\Bin64.Release.Dedicated\\MegaFrogRace_Server.exe", "NewGameSessionProtectionPolicy": "FullProtection", "CertificateConfiguration": { "CertificateType": "GENERATED" } } }
Example 4: To create a Realtime Servers fleet
The following
create-fleet
example creates a fleet of Spot instances with a Realtime configuration script that has been uploaded to Amazon GameLift. All Realtime servers are deployed onto Linux machines. For the purposes of this example, assume that the uploaded Realtime script includes multiple script files, with theInit()
function located in the script file calledMainScript.js
. As shown, this file is identified as the launch script in the runtime configuration.aws gamelift create-fleet \ --name
MegaFrogRace.NA.realtime
\ --description 'Mega Frog Race Realtime fleet
' \ --script-idscript-1111aaaa-22bb-33cc-44dd-5555eeee66ff
\ --ec2-instance-typec4.large
\ --fleet-typeSPOT
\ --certificate-configuration 'CertificateType=GENERATED
' --runtime-configuration 'ServerProcesses=[{LaunchPath=/local/game/MainScript.js,Parameters=+map Winter444,ConcurrentExecutions=5}]
'Output:
{ "FleetAttributes": { "FleetId": "fleet-2222bbbb-33cc-44dd-55ee-6666ffff77aa", "Status": "NEW", "CreationTime": 1569310745.212, "InstanceType": "c4.large", "NewGameSessionProtectionPolicy": "NoProtection", "CertificateConfiguration": { "CertificateType": "GENERATED" }, "Name": "MegaFrogRace.NA.realtime", "ScriptId": "script-1111aaaa-22bb-33cc-44dd-5555eeee66ff", "FleetArn": "arn:aws:gamelift:us-west-2:444455556666:fleet/fleet-2222bbbb-33cc-44dd-55ee-6666ffff77aa", "FleetType": "SPOT", "MetricGroups": [ "default" ], "Description": "Mega Frog Race Realtime fleet", "OperatingSystem": "AMAZON_LINUX" } }
-
For API details, see CreateFleet
in AWS CLI Command Reference.
-
The following code example shows how to use create-game-session-queue
.
- AWS CLI
-
Example1: To set up an ordered game session queue
The following
create-game-session-queue
example creates a new game session queue with destinations in two regions. It also configures the queue so that game session requests time out after waiting 10 minutes for placement. Since no latency policies are defined, GameLift attempts to place all game sessions with the first destination listed.aws gamelift create-game-session-queue \ --name
MegaFrogRaceServer-NA
\ --destinationsfile://destinations.json
\ --timeout-in-seconds600
Contents of
destinations.json
:{ "Destinations": [ {"DestinationArn": "arn:aws:gamelift:us-west-2::fleet/fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111" }, {"DestinationArn": "arn:aws:gamelift:us-west-1::fleet/fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE22222" } ] }
Output:
{ "GameSessionQueues": [ { "Name": "MegaFrogRaceServer-NA", "GameSessionQueueArn": "arn:aws:gamelift:us-west-2:123456789012:gamesessionqueue/MegaFrogRaceServer-NA", "TimeoutInSeconds": 600, "Destinations": [ {"DestinationArn": "arn:aws:gamelift:us-west-2::fleet/fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111"}, {"DestinationArn": "arn:aws:gamelift:us-west-1::fleet/fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE22222"} ] } ] }
Example2: To set up a game session queue with player latency policies
The following
create-game-session-queue
example creates a new game session queue with two player latency policies. The first policy sets a 100ms latency cap that is enforced during the first minute of a game session placement attempt. The second policy raises the latency cap to 200ms until the placement request times out at 3 minutes.aws gamelift create-game-session-queue \ --name
MegaFrogRaceServer-NA
\ --destinationsfile://destinations.json
\ --player-latency-policiesfile://latency-policies.json
\ --timeout-in-seconds180
Contents of
destinations.json
:{ "Destinations": [ { "DestinationArn": "arn:aws:gamelift:us-west-2::fleet/fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111" }, { "DestinationArn": "arn:aws:gamelift:us-east-1::fleet/fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE22222" } ] }
Contents of
latency-policies.json
:{ "PlayerLatencyPolicies": [ {"MaximumIndividualPlayerLatencyMilliseconds": 200}, {"MaximumIndividualPlayerLatencyMilliseconds": 100, "PolicyDurationSeconds": 60} ] }
Output:
{ "GameSessionQueue": { "Name": "MegaFrogRaceServer-NA", "GameSessionQueueArn": "arn:aws:gamelift:us-west-2:111122223333:gamesessionqueue/MegaFrogRaceServer-NA", "TimeoutInSeconds": 600, "PlayerLatencyPolicies": [ { "MaximumIndividualPlayerLatencyMilliseconds": 100, "PolicyDurationSeconds": 60 }, { "MaximumIndividualPlayerLatencyMilliseconds": 200 } ] "Destinations": [ {"DestinationArn": "arn:aws:gamelift:us-west-2::fleet/fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111"}, {"DestinationArn": "arn:aws:gamelift:us-east-1::fleet/fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE22222"} ], } }
For more information, see Create a Queue in the Amazon GameLift Developer Guide.
-
For API details, see CreateGameSessionQueue
in AWS CLI Command Reference.
-
The following code example shows how to use delete-build
.
- AWS CLI
-
To delete a custom game build
The following
delete-build
example removes a build from your Amazon GameLift account. After the build is deleted, you cannot use it to create new fleets. This operation cannot be undone.aws gamelift delete-build \ --build-id
build-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111
This command produces no output.
-
For API details, see DeleteBuild
in AWS CLI Command Reference.
-
The following code example shows how to use delete-fleet
.
- AWS CLI
-
To delete a fleet that is no longer in use
The following
delete-fleet
example removes a fleet that has been scaled down to zero instances. If the fleet capacity is greater than zero, the request fails with an HTTP 400 error.aws gamelift delete-fleet \ --fleet-id
fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111
This command produces no output.
For more information, see Manage GameLift Fleets in the Amazon GameLift Developer Guide.
-
For API details, see DeleteFleet
in AWS CLI Command Reference.
-
The following code example shows how to use delete-game-session-queue
.
- AWS CLI
-
To delete a game session queue
The following
delete-game-session-queue
example deletes a specified game session queue.aws gamelift delete-game-session-queue \ --name
MegaFrogRace-NA
This command produces no output.
-
For API details, see DeleteGameSessionQueue
in AWS CLI Command Reference.
-
The following code example shows how to use describe-build
.
- AWS CLI
-
To get information on a custom game build
The following
describe-build
example retrieves properties for a game server build resource.aws gamelift describe-build \ --build-id
build-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111
Output:
{ "Build": { "BuildArn": "arn:aws:gamelift:us-west-2::build/build-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "BuildId": "build-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "CreationTime": 1496708916.18, "Name": "My_Game_Server_Build_One", "OperatingSystem": "AMAZON_LINUX", "SizeOnDisk": 1304924, "Status": "READY", "Version": "12345.678" } }
For more information, see Upload a Custom Server Build to GameLift in the Amazon GameLift Developer Guide.
-
For API details, see DescribeBuild
in AWS CLI Command Reference.
-
The following code example shows how to use describe-ec2-instance-limits
.
- AWS CLI
-
To retrieve service limits for an EC2 instance type
The following
describe-ec2-instance-limits
example displays the maximum allowed instances and current instances in use for the specified EC2 instance type in the current Region. The result indicates that only five of the allowed twenty instances are being used.aws gamelift describe-ec2-instance-limits \ --ec2-instance-type
m5.large
Output:
{ "EC2InstanceLimits": [ { "EC2InstanceType": ""m5.large", "CurrentInstances": 5, "InstanceLimit": 20 } ] }
For more information, see Choose Computing Resources in the Amazon GameLift Developer Guide.
-
For API details, see DescribeEc2InstanceLimits
in AWS CLI Command Reference.
-
The following code example shows how to use describe-fleet-attributes
.
- AWS CLI
-
Example1: To view attributes for a list of fleets
The following
describe-fleet-attributes
example retrieves fleet attributes for two specified fleets. As shown, the requested fleets are deployed with the same build, one for On-Demand instances and one for Spot instances, with some minor configuration differences.aws gamelift describe-fleet-attributes \ --fleet-ids
arn:aws:gamelift:us-west-2::fleet/fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111
fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE22222
Output:
{ "FleetAttributes": [ { "FleetId": "fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "FleetArn": "arn:aws:gamelift:us-west-2::fleet/fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "FleetType": "ON_DEMAND", "InstanceType": "c4.large", "Description": "On-demand hosts for v2 North America", "Name": "MegaFrogRaceServer.NA.v2-od", "CreationTime": 1568836191.995, "Status": "ACTIVE", "BuildId": "build-a1b2c3d4-5678-90ab-cdef-EXAMPLE33333", "BuildArn": "arn:aws:gamelift:us-west-2::build/build-a1b2c3d4-5678-90ab-cdef-EXAMPLE33333", "ServerLaunchPath": "C:\\game\\MegaFrogRace_Server.exe", "ServerLaunchParameters": "+gamelift_start_server", "NewGameSessionProtectionPolicy": "NoProtection", "OperatingSystem": "WINDOWS_2012", "MetricGroups": [ "default" ], "CertificateConfiguration": { "CertificateType": "DISABLED" } }, { "FleetId": "fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE22222", "FleetArn": "arn:aws:gamelift:us-west-2::fleet/fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE22222", "FleetType": "SPOT", "InstanceType": "c4.large", "Description": "On-demand hosts for v2 North America", "Name": "MegaFrogRaceServer.NA.v2-spot", "CreationTime": 1568838275.379, "Status": "ACTIVATING", "BuildId": "build-a1b2c3d4-5678-90ab-cdef-EXAMPLE33333", "BuildArn": "arn:aws:gamelift:us-west-2::build/build-a1b2c3d4-5678-90ab-cdef-EXAMPLE33333", "ServerLaunchPath": "C:\\game\\MegaFrogRace_Server.exe", "NewGameSessionProtectionPolicy": "NoProtection", "OperatingSystem": "WINDOWS_2012", "MetricGroups": [ "default" ], "CertificateConfiguration": { "CertificateType": "GENERATED" } } ] }
Example2: To request attributes for all fleets
The following
describe-fleet-attributes
returns fleet attributes for all fleets with any status. This example illustrates the use of pagination parameters to return one fleet at a time.aws gamelift describe-fleet-attributes \ --limit
1
Output:
{ "FleetAttributes": [ { "FleetId": "fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE22222", "FleetArn": "arn:aws:gamelift:us-west-2::fleet/fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE22222", "FleetType": "SPOT", "InstanceType": "c4.large", "Description": "On-demand hosts for v2 North America", "Name": "MegaFrogRaceServer.NA.v2-spot", "CreationTime": 1568838275.379, "Status": "ACTIVATING", "BuildId": "build-a1b2c3d4-5678-90ab-cdef-EXAMPLE33333", "BuildArn": "arn:aws:gamelift:us-west-2::build/build-a1b2c3d4-5678-90ab-cdef-EXAMPLE33333", "ServerLaunchPath": "C:\\game\\MegaFrogRace_Server.exe", "NewGameSessionProtectionPolicy": "NoProtection", "OperatingSystem": "WINDOWS_2012", "MetricGroups": [ "default" ], "CertificateConfiguration": { "CertificateType": "GENERATED" } } ], "NextToken": "eyJhd3NBY2NvdW50SWQiOnsicyI6IjMwMjc3NjAxNjM5OCJ9LCJidWlsZElkIjp7InMiOiJidWlsZC01NWYxZTZmMS1jY2FlLTQ3YTctOWI5ZS1iYjFkYTQwMjEXAMPLE2" }
The output includes a
NextToken
value that you can use when you call the command a second time. Pass the value to the--next-token
parameter to specify where to pick up the output. The following command returns the second result in the output.aws gamelift describe-fleet-attributes \ --limit
1
\ --next-tokeneyJhd3NBY2NvdW50SWQiOnsicyI6IjMwMjc3NjAxNjM5OCJ9LCJidWlsZElkIjp7InMiOiJidWlsZC01NWYxZTZmMS1jY2FlLTQ3YTctOWI5ZS1iYjFkYTQwMjEXAMPLE1
Repeat until the response doesn't include a
NextToken
value.For more information, see Setting Up GameLift Fleets in the Amazon GameLift Developer Guide.
-
For API details, see DescribeFleetAttributes
in AWS CLI Command Reference.
-
The following code example shows how to use describe-fleet-capacity
.
- AWS CLI
-
To view capacity status for a list of fleets
The following
describe-fleet-capacity
example retrieves current capacity for two specified fleets.aws gamelift describe-fleet-capacity \ --fleet-ids
arn:aws:gamelift:us-west-2::fleet/fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111
fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE22222
Output:
{ "FleetCapacity": [ { "FleetId": "fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "InstanceType": "c5.large", "InstanceCounts": { "DESIRED": 10, "MINIMUM": 1, "MAXIMUM": 20, "PENDING": 0, "ACTIVE": 10, "IDLE": 3, "TERMINATING": 0 } }, { "FleetId": "fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE22222", "InstanceType": "c5.large", "InstanceCounts": { "DESIRED": 13, "MINIMUM": 1, "MAXIMUM": 20, "PENDING": 0, "ACTIVE": 15, "IDLE": 2, "TERMINATING": 2 } } ] }
For more information, see GameLift Metrics for Fleets in the Amazon GameLift Developer Guide.
-
For API details, see DescribeFleetCapacity
in AWS CLI Command Reference.
-
The following code example shows how to use describe-fleet-events
.
- AWS CLI
-
To request events for a specified time span
The following
describe-fleet-events
example diplays details of all fleet-related events that occurred during the specified time span.aws gamelift describe-fleet-events \ --fleet-id
arn:aws:gamelift:us-west-2::fleet/fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111
\ --start-time1579647600
\ --end-time1579649400
\ --limit5
Output:
{ "Events": [ { "EventId": "a37b6892-5d07-4d3b-8b47-80244ecf66b9", "ResourceId": "fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "EventCode": "FLEET_STATE_ACTIVE", "Message": "Fleet fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111 changed state to ACTIVE", "EventTime": 1579649342.191 }, { "EventId": "67da4ec9-92a3-4d95-886a-5d6772c24063", "ResourceId": "fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "EventCode": "FLEET_STATE_ACTIVATING", "Message": "Fleet fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111 changed state to ACTIVATING", "EventTime": 1579649321.427 }, { "EventId": "23813a46-a9e6-4a53-8847-f12e6a8381ac", "ResourceId": "fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "EventCode": "FLEET_STATE_BUILDING", "Message": "Fleet fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111 changed state to BUILDING", "EventTime": 1579649321.243 }, { "EventId": "3bf217d0-1d44-42f9-9202-433ed475d2e8", "ResourceId": "fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "EventCode": "FLEET_STATE_VALIDATING", "Message": "Fleet fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111 changed state to VALIDATING", "EventTime": 1579649197.449 }, { "EventId": "2ecd0130-5986-44eb-99a7-62df27741084", "ResourceId": "fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "EventCode": "FLEET_VALIDATION_LAUNCH_PATH_NOT_FOUND", "Message": "Failed to find a valid path", "EventTime": 1569319075.839, "PreSignedLogUrl": "https://gamelift-event-logs-prod-us-west-2.s3.us-west-2.amazonaws.com/logs/fleet-83422059-8329-42a2-a4d6-c4444386a6f8/events/2ecd0130-5986-44eb-99a7-62df27741084/FLEET_VALIDATION_LAUNCH_PATH_NOT_FOUND.txt?X-Amz-Security-Token=IQoJb3JpZ2luX2VjEB8aCXVzLXdlc3QtMiJHMEUCIHV5K%2FLPx8h310D%2FAvx0%2FZxsDy5XA3cJOwPdu3T0eBa%2FAiEA1yovokcZYy%2FV4CWW6l26aFyiSHO%2Bxz%2FBMAhEHYHMQNcqkQMImP%2F%2F%2F%2F%2F%2F%2F%2F%2F%2FARAAGgw3NDEwNjE1OTIxNzEiDI8rsZtzLzlwEDQhXSrlAtl5Ae%2Fgo6FCIzqXPbXfBOnSvFYqeDlriZarEpKqKrUt8mXQv9iqHResqCph9AKo49lwgSYTT2QoSxnrD7%2FUgv%2BZm2pVuczvuKtUA0fcx6s0GxpjIAzdIE%2F5P%2FB7B9M%2BVZ%2F9KF82hbJi0HTE6Y7BjKsEgFCvk4UXILhfjtan9iQl8%2F21ZTurAcJbm7Y5tuLF9SWSK3%2BEa7VXOcCK4D4O1sMjmdRm0q0CKZ%2FIaXoHkNvg0RVTa0hIqdvpaDQlsSBNdqTXbjHTu6fETE9Y9Ky%2BiJK5KiUG%2F59GjCpDcvS1FqKeLUEmKT7wysGmvjMc2n%2Fr%2F9VxQfte7w9srXwlLAQuwhiXAAyI5ICMZ5JvzjzQwTqD4CHTVKUUDwL%2BRZzbuuqkJObZml02CkRGp%2B74RTAzLbWptVqZTIfzctiCTmWxb%2FmKyELRYsVLrwNJ%2BGJ7%2BCrN0RC%2FjlgfLYIZyeAqjPgAu5HjgX%2BM7jCo9M7wBTrnAXKOFQuf9dvA84SuwXOJFp17LYGjrHMKv0qC3GfbTMrZ6kzeNV9awKCpXB2Gnx9z2KvIlJdqirWVpvHVGwKCmJBCesDzjJHrae3neogI1uW%2F9C6%2B4jIZPME3jXmZcEHqqw5uvAVF7aeIavtUZU8pxpDIWT0YE4p3Kriy2AA7ziCRKtVfjV839InyLk8LUjsioWK2qlpg2HXKFLpAXw1QsQyxYmFMB9sGKOUlbL7Jdkk%2BYUq8%2FDTlLxqj1S%2FiO4TI0Wo7ilAo%2FKKWWF4guuNDexj8EOOynSp1yImB%2BZf2Fua3O44W4eEXAMPLE33333&X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Date=20170621T231808Z&X-Amz-SignedHeaders=host&X-Amz-Expires=900&X-Amz-Credential=AKIAIOSFODNN7EXAMPLE%2F20170621%2Fus-west-2%2Fs3%2Faws4_request&X-Amz-Signature=wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY" } ], "NextToken": "eyJhd3NBY2NvdW50SWQiOnsicyI6IjMwMjc3NjAxNjM5OCJ9LCJidWlsZElkIjp7InMiOiJidWlsZC01NWYxZTZmMS1jY2FlLTQ3YTctOWI5ZS1iYjFkYTQwMjEXAMPLE2" }
For more information, see Debug GameLift Fleet Issues in the Amazon GameLift Developer Guide.
-
For API details, see DescribeFleetEvents
in AWS CLI Command Reference.
-
The following code example shows how to use describe-fleet-port-settings
.
- AWS CLI
-
To view inbound connection permissions for a fleet
The following
describe-fleet-port-settings
example retrieves connection settings for a specified fleet.aws gamelift describe-fleet-port-settings \ --fleet-id
arn:aws:gamelift:us-west-2::fleet/fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111
Output:
{ "InboundPermissions": [ { "FromPort": 33400, "ToPort": 33500, "IpRange": "0.0.0.0/0", "Protocol": "UDP" }, { "FromPort": 1900, "ToPort": 2000, "IpRange": "0.0.0.0/0", "Protocol": "TCP" } ] }
For more information, see Setting Up GameLift Fleets in the Amazon GameLift Developer Guide.
-
For API details, see DescribeFleetPortSettings
in AWS CLI Command Reference.
-
The following code example shows how to use describe-fleet-utilization
.
- AWS CLI
-
Example1: To view usage data for a list of fleets
The following
describe-fleet-utilization
example retrieves current usage information for one specified fleet.aws gamelift describe-fleet-utilization \ --fleet-ids
arn:aws:gamelift:us-west-2::fleet/fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111
Output:
{ "FleetUtilization": [ { "FleetId": "fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "ActiveServerProcessCount": 100, "ActiveGameSessionCount": 62, "CurrentPlayerSessionCount": 329, "MaximumPlayerSessionCount": 1000 } ] }
Example2: To request usage data for all fleets
The following
describe-fleet-utilization
returns fleet usage data for all fleets with any status. This example uses pagination parameters to return data for two fleets at a time.aws gamelift describe-fleet-utilization \ --limit
2
Output:
{ "FleetUtilization": [ { "FleetId": "fleet-1111aaaa-22bb-33cc-44dd-5555eeee66ff", "ActiveServerProcessCount": 100, "ActiveGameSessionCount": 13, "CurrentPlayerSessionCount": 98, "MaximumPlayerSessionCount": 1000 }, { "FleetId": "fleet-2222bbbb-33cc-44dd-55ee-6666ffff77aa", "ActiveServerProcessCount": 100, "ActiveGameSessionCount": 62, "CurrentPlayerSessionCount": 329, "MaximumPlayerSessionCount": 1000 } ], "NextToken": "eyJhd3NBY2NvdW50SWQiOnsicyI6IjMwMjc3NjAxNjM5OCJ9LCJidWlsZElkIjp7InMiOiJidWlsZC01NWYxZTZmMS1jY2FlLTQ3YTctOWI5ZS1iYjFkYTQwMjEXAMPLE2" }
Call the command a second time, passing the
NextToken
value as the argument to the--next-token
parameter to see the next two results.aws gamelift describe-fleet-utilization \ --limit
2
\ --next-tokeneyJhd3NBY2NvdW50SWQiOnsicyI6IjMwMjc3NjAxNjM5OCJ9LCJidWlsZElkIjp7InMiOiJidWlsZC01NWYxZTZmMS1jY2FlLTQ3YTctOWI5ZS1iYjFkYTQwMjEXAMPLE2
Repeat until the response no longer includes a
NextToken
value in the output.For more information, see GameLift Metrics for Fleets in the Amazon GameLift Developer Guide.
-
For API details, see DescribeFleetUtilization
in AWS CLI Command Reference.
-
The following code example shows how to use describe-game-session-queues
.
- AWS CLI
-
To view game session queues
The following
describe-game-session-queues
example retrieves properties for two specified queues.aws gamelift describe-game-session-queues \ --names
MegaFrogRace-NA
MegaFrogRace-EU
Output:
{ "GameSessionQueues": [{ "Destinations": [{ "DestinationArn": "arn:aws:gamelift:us-west-2::fleet/fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111" }, { "DestinationArn": "arn:aws:gamelift:us-west-2::fleet/fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE22222" } ], "Name": "MegaFrogRace-NA", "TimeoutInSeconds": 600, "GameSessionQueueArn": "arn:aws:gamelift:us-west-2::gamesessionqueue/MegaFrogRace-NA", "PlayerLatencyPolicies": [{ "MaximumIndividualPlayerLatencyMilliseconds": 200 }, { "MaximumIndividualPlayerLatencyMilliseconds": 100, "PolicyDurationSeconds": 60 } ], "FilterConfiguration": { "AllowedLocations": ["us-west-2", "ap-south-1", "us-east-1"] }, "PriorityConfiguration": { "PriorityOrder": ["LOCATION", "FLEET_TYPE", "DESTINATION"], "LocationOrder": ["us-west-2", "ap-south-1", "us-east-1"] } }, { "Destinations": [{ "DestinationArn": "arn:aws:gamelift:eu-west-3::fleet/fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE22222" }], "Name": "MegaFrogRace-EU", "TimeoutInSeconds": 600, "GameSessionQueueArn": "arn:aws:gamelift:us-west-2::gamesessionqueue/MegaFrogRace-EU" } ] }
For more information, see Using Multi-Region Queues in the Amazon GameLift Developer Guide.
-
For API details, see DescribeGameSessionQueues
in AWS CLI Command Reference.
-
The following code example shows how to use describe-runtime-configuration
.
- AWS CLI
-
To request the runtime configuration for a fleet
The following
describe-runtime-configuration
example retrieves details about the current runtime configuration for a specified fleet.aws gamelift describe-runtime-configuration \ --fleet-id
fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111
Output:
{ "RuntimeConfiguration": { "ServerProcesses": [ { "LaunchPath": "C:\game\Bin64.Release.Dedicated\MegaFrogRace_Server.exe", "Parameters": "+gamelift_start_server", "ConcurrentExecutions": 3 }, { "LaunchPath": "C:\game\Bin64.Release.Dedicated\MegaFrogRace_Server.exe", "Parameters": "+gamelift_start_server +debug", "ConcurrentExecutions": 1 } ], "MaxConcurrentGameSessionActivations": 2147483647, "GameSessionActivationTimeoutSeconds": 300 } }
For more information, see Run Multiple Processes on a Fleet in the Amazon GameLift Developer Guide.
-
For API details, see DescribeRuntimeConfiguration
in AWS CLI Command Reference.
-
The following code example shows how to use list-builds
.
- AWS CLI
-
Example1: To get a list of custom game builds
The following
list-builds
example retrieves properties for all game server builds in the current Region. The sample request illustrates how to use the pagination parameters,Limit
andNextToken
, to retrieve the results in sequential sets. The first command retrieves the first two builds. Because there are more than two available, the response includes aNextToken
to indicate that more results are available.aws gamelift list-builds \ --limit
2
Output:
{ "Builds": [ { "BuildArn": "arn:aws:gamelift:us-west-2::build/build-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "BuildId": "build-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "CreationTime": 1495664528.723, "Name": "My_Game_Server_Build_One", "OperatingSystem": "WINDOWS_2012", "SizeOnDisk": 8567781, "Status": "READY", "Version": "12345.678" }, { "BuildArn": "arn:aws:gamelift:us-west-2::build/build-a1b2c3d4-5678-90ab-cdef-EXAMPLE22222", "BuildId": "build-a1b2c3d4-5678-90ab-cdef-EXAMPLE22222", "CreationTime": 1495528748.555, "Name": "My_Game_Server_Build_Two", "OperatingSystem": "AMAZON_LINUX_2", "SizeOnDisk": 8567781, "Status": "FAILED", "Version": "23456.789" } ], "NextToken": "eyJhd3NBY2NvdW50SWQiOnsicyI6IjMwMjc3NjAxNjM5OCJ9LCJidWlsZElkIjp7InMiOiJidWlsZC01NWYxZTZmMS1jY2FlLTQ3YTctOWI5ZS1iYjFkYTQwMjJEXAMPLE=" }
You can then call the command again with the
--next-token
parameter as follows to see the next two builds.aws gamelift list-builds \ --limit
2
--next-tokeneyJhd3NBY2NvdW50SWQiOnsicyI6IjMwMjc3NjAxNjM5OCJ9LCJidWlsZElkIjp7InMiOiJidWlsZC01NWYxZTZmMS1jY2FlLTQ3YTctOWI5ZS1iYjFkYTQwMjJEXAMPLE=
Repeat until the response doesn't include a
NextToken
value.Example2: To get a list of custom game builds in failure status
The following
list-builds
example retrieves properties for all game server builds in the current region that currently have status FAILED.aws gamelift list-builds \ --status
FAILED
Output:
{ "Builds": [ { "BuildArn": "arn:aws:gamelift:us-west-2::build/build-a1b2c3d4-5678-90ab-cdef-EXAMPLE22222", "BuildId": "build-a1b2c3d4-5678-90ab-cdef-EXAMPLE22222", "CreationTime": 1495528748.555, "Name": "My_Game_Server_Build_Two", "OperatingSystem": "AMAZON_LINUX_2", "SizeOnDisk": 8567781, "Status": "FAILED", "Version": "23456.789" } ] }
-
For API details, see ListBuilds
in AWS CLI Command Reference.
-
The following code example shows how to use list-fleets
.
- AWS CLI
-
Example1: To get a list of all fleets in a Region
The following
list-fleets
example displays the fleet IDs of all fleets in the current Region. This example uses pagination parameters to retrieve two fleet IDs at a time. The response includes anext-token
attribute, which indicates that there are more results to retrieve.aws gamelift list-fleets \ --limit
2
Output:
{ "FleetIds": [ "fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE22222" ], "NextToken": "eyJhd3NBY2NvdW50SWQiOnsicyI6IjMwMjc3NjAxNjM5OCJ9LCJidWlsZElkIjp7InMiOiJidWlsZC01NWYxZTZmMS1jY2FlLTQ3YTctOWI5ZS1iYjFkYTQwMjJEXAMPLE=" }
You can pass the
NextToken
value from the previous response in the next command, as shown here to get the next two results.aws gamelift list-fleets \ --limit
2
\ --next-tokeneyJhd3NBY2NvdW50SWQiOnsicyI6IjMwMjc3NjAxNjM5OCJ9LCJidWlsZElkIjp7InMiOiJidWlsZC00NDRlZjQxZS1hM2I1LTQ2NDYtODJmMy0zYzI4ZTgxNjVjEXAMPLE=
Example2: To get a list of all fleets in a Region with a specific build or script
The following
list-builds
example retrieves the IDs of fleets that are deployed with the specified game build. If you're working with Realtime Servers, you can provide a script ID in place of a build ID. Because this example does not specify the limit parameter, the results can include up to 16 fleet IDs.aws gamelift list-fleets \ --build-id
build-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111
Output:
{ "FleetIds": [ "fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE22222", "fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE33333", "fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE44444" ] }
-
For API details, see ListFleets
in AWS CLI Command Reference.
-
The following code example shows how to use request-upload-credentials
.
- AWS CLI
-
To refresh access credentials for uploading a build
The following
create-build
example obtains new, valid access credentials for uploading a GameLift build file to an Amazon S3 location. Credentials have a limited life span. You get the build ID from the response to the originalCreateBuild
request.aws gamelift request-upload-credentials \ --build-id
build-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111
Output:
{ "StorageLocation": { "Bucket": "gamelift-builds-us-west-2", "Key": "123456789012/build-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111" }, "UploadCredentials": { "AccessKeyId": "AKIAIOSFODNN7EXAMPLE", "SecretAccessKey": "wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY", "SessionToken": "AgoGb3JpZ2luENz...EXAMPLETOKEN==" } }
For more information, see Upload a Custom Server Build to GameLift in the Amazon GameLift Developer Guide.
-
For API details, see RequestUploadCredentials
in AWS CLI Command Reference.
-
The following code example shows how to use start-fleet-actions
.
- AWS CLI
-
To restart fleet automatic scaling activity
The following
start-fleet-actions
example resumes the use of all scaling policies that are defined for the specified fleet but were stopped by calling``stop-fleet-actions``. After starting, the scaling policies immediately begin tracking their respective metrics.aws gamelift start-fleet-actions \ --fleet-id
fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111
\ --actionsAUTO_SCALING
This command produces no output.
-
For API details, see StartFleetActions
in AWS CLI Command Reference.
-
The following code example shows how to use stop-fleet-actions
.
- AWS CLI
-
To stop a fleet's automatic scaling activity
The following
stop-fleet-actions
example stops the use of all scaling policies that are defined for the specified fleet. After the policies are suspended, fleet capacity remains at the same active instance count unless you adjust it manually.aws gamelift start-fleet-actions \ --fleet-id
fleet-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111
\ --actionsAUTO_SCALING
This command produces no output.
-
For API details, see StopFleetActions
in AWS CLI Command Reference.
-
The following code example shows how to use update-build
.
- AWS CLI
-
To update a custom game build
The following
update-build
example changes the name and version information that is associated with a specified build resource. The returned build object verifies that the changes were made successfully.aws gamelift update-build \ --build-id
build-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111
\ --nameMegaFrogRaceServer.NA.east
\ --build-version12345.east
Output:
{ "Build": { "BuildArn": "arn:aws:gamelift:us-west-2::build/build-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "BuildId": "build-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111", "CreationTime": 1496708916.18, "Name": "MegaFrogRaceServer.NA.east", "OperatingSystem": "AMAZON_LINUX_2", "SizeOnDisk": 1304924, "Status": "READY", "Version": "12345.east" } }
For more information, see Update Your Build Files in the Amazon GameLift Developer Guide.
-
For API details, see UpdateBuild
in AWS CLI Command Reference.
-
The following code example shows how to use update-game-session-queue
.
- AWS CLI
-
To update a game session queue configuration
The following
update-game-session-queue
example adds a new destination and updates the player latency policies for an existing game session queue.aws gamelift update-game-session-queue \ --name
MegaFrogRace-NA
\ --destinationsfile://destinations.json
\ --player-latency-policiesfile://latency-policies.json
Contents of
destinations.json
:{ "Destinations": [ {"DestinationArn": "arn:aws:gamelift:us-west-2::fleet/fleet-1a2b3c4d-5e6f-7a8b-9c0d-1e2f3a4b5c6d"}, {"DestinationArn": "arn:aws:gamelift:us-east-1::fleet/fleet-5c6d3c4d-5e6f-7a8b-9c0d-1e2f3a4b5a2b"}, {"DestinationArn": "arn:aws:gamelift:us-east-1::alias/alias-11aa22bb-3c4d-5e6f-000a-1111aaaa22bb"} ] }
Contents of
latency-policies.json
:{ "PlayerLatencyPolicies": [ {"MaximumIndividualPlayerLatencyMilliseconds": 200}, {"MaximumIndividualPlayerLatencyMilliseconds": 150, "PolicyDurationSeconds": 120}, {"MaximumIndividualPlayerLatencyMilliseconds": 100, "PolicyDurationSeconds": 120} ] }
Output:
{ "GameSessionQueue": { "Destinations": [ {"DestinationArn": "arn:aws:gamelift:us-west-2::fleet/fleet-1a2b3c4d-5e6f-7a8b-9c0d-1e2f3a4b5c6d"}, {"DestinationArn": "arn:aws:gamelift:us-east-1::fleet/fleet-5c6d3c4d-5e6f-7a8b-9c0d-1e2f3a4b5a2b"}, {"DestinationArn": "arn:aws:gamelift:us-east-1::alias/alias-11aa22bb-3c4d-5e6f-000a-1111aaaa22bb"} ], "GameSessionQueueArn": "arn:aws:gamelift:us-west-2:111122223333:gamesessionqueue/MegaFrogRace-NA", "Name": "MegaFrogRace-NA", "TimeoutInSeconds": 600, "PlayerLatencyPolicies": [ {"MaximumIndividualPlayerLatencyMilliseconds": 200}, {"MaximumIndividualPlayerLatencyMilliseconds": 150, "PolicyDurationSeconds": 120}, {"MaximumIndividualPlayerLatencyMilliseconds": 100, "PolicyDurationSeconds": 120} ] } }
For more information, see Using Multi-Region Queues in the Amazon GameLift Developer Guide.
-
For API details, see UpdateGameSessionQueue
in AWS CLI Command Reference.
-
The following code example shows how to use upload-build
.
- AWS CLI
-
Example1: To upload a Linux game server build
The following
upload-build
example uploads Linux game server build files from a file directory to the GameLift service and creates a build resource.aws gamelift upload-build \ --name
MegaFrogRaceServer.NA
\ --build-version2.0.1
\ --build-root~/MegaFrogRace_Server/release-na
\ --operating-systemAMAZON_LINUX_2
--server-sdk-version4.0.2
Output:
Uploading ~/MegaFrogRace_Server/release-na: 16.0 KiB / 74.6 KiB (21.45%) Uploading ~/MegaFrogRace_Server/release-na: 32.0 KiB / 74.6 KiB (42.89%) Uploading ~/MegaFrogRace_Server/release-na: 48.0 KiB / 74.6 KiB (64.34%) Uploading ~/MegaFrogRace_Server/release-na: 64.0 KiB / 74.6 KiB (85.79%) Uploading ~/MegaFrogRace_Server/release-na: 74.6 KiB / 74.6 KiB (100.00%) Successfully uploaded ~/MegaFrogRace_Server/release-na to AWS GameLift Build ID: build-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111
Example2: To upload a Windows game server build
The following
upload-build
example uploads Windows game server build files from a directory to the GameLift service and creates a build record.aws gamelift upload-build \ --name
MegaFrogRaceServer.NA
\ --build-version2.0.1
\ --build-root C:\MegaFrogRace_Server\release-na \ --operating-systemWINDOWS_2012
--server-sdk-version4.0.2
Output:
Uploading C:\MegaFrogRace_Server\release-na: 16.0 KiB / 74.6 KiB (21.45%) Uploading C:\MegaFrogRace_Server\release-na: 32.0 KiB / 74.6 KiB (42.89%) Uploading C:\MegaFrogRace_Server\release-na: 48.0 KiB / 74.6 KiB (64.34%) Uploading C:\MegaFrogRace_Server\release-na: 64.0 KiB / 74.6 KiB (85.79%) Uploading C:\MegaFrogRace_Server\release-na: 74.6 KiB / 74.6 KiB (100.00%) Successfully uploaded C:\MegaFrogRace_Server\release-na to AWS GameLift Build ID: build-a1b2c3d4-5678-90ab-cdef-EXAMPLE11111
For more information, see Upload a Custom Server Build to GameLift in the Amazon GameLift Developer Guide.
-
For API details, see UploadBuild
in AWS CLI Command Reference.
-