Get hardware information for each HSM in an AWS CloudHSM cluster with CMU - AWS CloudHSM

Get hardware information for each HSM in an AWS CloudHSM cluster with CMU

Use the getHSMInfo command in the AWS CloudHSM cloudhsm_mgmt_util (CMU) to get information about the hardware on which each hardware security module (HSM) runs, including the model, serial number, FIPS state, memory, temperature, and the version numbers of the hardware and firmware. The information also includes the server ID that cloudhsm_mgmt_util uses to refer to the HSM.

Before you run any CMU command, you must start CMU and log in to the HSM. Be sure that you log in with a user type that can run the commands you plan to use.

If you add or delete HSMs, update the configuration files for CMU. Otherwise, the changes that you make might not be effective for all HSMs in the cluster.

User type

The following types of users can run this command.

  • All users. You do not have to be logged in to run this command.

Syntax

This command has no parameters.

getHSMInfo

Example

This example uses getHSMInfo to get information about the HSMs in the cluster.

aws-cloudhsm> getHSMInfo Getting HSM Info on 3 nodes *** Server 0 HSM Info *** Label :cavium Model :NITROX-III CNN35XX-NFBE Serial Number :3.0A0101-ICM000001 HSM Flags :0 FIPS state :2 [FIPS mode with single factor authentication] Manufacturer ID : Device ID :10 Class Code :100000 System vendor ID :177D SubSystem ID :10 TotalPublicMemory :560596 FreePublicMemory :294568 TotalPrivateMemory :0 FreePrivateMemory :0 Hardware Major :3 Hardware Minor :0 Firmware Major :2 Firmware Minor :03 Temperature :56 C Build Number :13 Firmware ID :xxxxxxxxxxxxxxx ...

Related topics