Create a cluster in AWS CloudHSM - AWS CloudHSM

Create a cluster in AWS CloudHSM

A cluster is a collection of individual hardware security modules (HSMs). AWS CloudHSM synchronizes the HSMs in each cluster so that they function as a logical unit. AWS CloudHSM offers two types of HSMs: hsm1.medium and hsm2m.medium. When you create a cluster, you choose which of the two will be in your cluster. For details on the differences between each HSM type and cluster mode, see AWS CloudHSM cluster modes.

When you create a cluster, AWS CloudHSM creates a security group for the cluster on your behalf. This security group controls network access to the HSMs in the cluster. It allows inbound connections only from Amazon Elastic Compute Cloud (Amazon EC2) instances that are in the security group. By default, the security group doesn't contain any instances. Later, you launch a client instance and configure the cluster's security group to allow communication and connections with the HSM.

Important

When you create a cluster, AWS CloudHSM creates a service-linked role named AWSServiceRoleForCloudHSM. If AWS CloudHSM cannot create the role or the role does not already exist, you may not be able to create a cluster. For more information, see Resolving AWS CloudHSM cluster creation failures. For more information about service–linked roles, see Service-linked roles for AWS CloudHSM.

Important

If you are using the AWS CloudHSM dual-stack endpoint (i.e. cloudhsmv2.region.api.aws), ensure that your IAM policies are updated to handle IPv6. For more information, see the Upgrade IAM policies to IPv6 section under Security.

You can create a cluster from the AWS CloudHSM console, the AWS Command Line Interface (AWS CLI), or the AWS CloudHSM API.

Note

For details on cluster arguments and APIs, see create-cluster in the AWS CLI Command Reference.

Console
To create a cluster (console)

  1. Open the AWS CloudHSM console at https://console.aws.amazon.com/cloudhsm/home.

  2. On the navigation bar, use the region selector to choose one of the AWS Regions where AWS CloudHSM is currently supported.

  3. Choose Create cluster.

  4. In the Cluster configuration section, do the following:

    1. For VPC, select the VPC that you created in Create a virtual private cloud (VPC) for AWS CloudHSM.

    2. For Availability Zone(s), next to each Availability Zone, choose the private subnet that you created.

      Note

      Even if AWS CloudHSM is not supported in a given Availability Zone, performance should not be affected, as AWS CloudHSM automatically load balances across all HSMs in a cluster. See AWS CloudHSM Regions and Endpoints in the AWS General Reference to see Availability Zone support for AWS CloudHSM.

    3. For HSM type, select the HSM type that can be created in your cluster along with the desired mode of the cluster. To see what HSM types are supported in each region, see the AWS CloudHSM pricing calculator.

      Important

      After the cluster is created, the HSM type and cluster mode cannot be changed. For information one which type and mode is right for your use case, see AWS CloudHSM cluster modes.

    4. For Network Type, choose the IP address protocols for accessing your HSMs. IPv4 limits communication between your application and HSMs to IPv4 only. This is the default option. Dual-stack enables both IPv4 and IPv6 communication. To use dual-stack, add both IPv4 and IPv6 CIDRs to your VPC and subnet configurations. The Network Type is difficult to change after initial setup. To modify it, create a backup of your existing cluster and restore a new cluster with the desired Network Type. For more information, see Creating AWS CloudHSM clusters from backups

    5. For Cluster source, specify whether you want to create a new cluster or restore one from an existing backup.

      • Backups of clusters in non-FIPS mode can only be used to restore clusters that are in non-FIPS mode.

      • Backups of clusters in FIPS mode can only be used to restore clusters that are in FIPS mode.

  5. Choose Next.

  6. Specify how long the service should retain backups.

    Note

    Accept the default retention period of 90 days or type a new value between 7 and 379 days. The service will automatically delete backups in this cluster older than the value you specify here. You can change this later. For more information, see Configure backup retention.

  7. Choose Next.

  8. (Optional) Type a tag key and an optional tag value. To add more than one tag to the cluster, choose Add tag.

  9. Choose Review.

  10. Review your cluster configuration, and then choose Create cluster.

If your attempts to create a cluster fail, it might be related to problems with the AWS CloudHSM service-linked roles. For help on resolving the failure, see Resolving AWS CloudHSM cluster creation failures.

AWS CLI
To create a cluster (AWS CLI)

  • At a command prompt, run the create-cluster command. Specify the HSM instance type, the backup retention period, and the subnet IDs of the subnets where you plan to create HSMs. Use the subnet IDs of the private subnets that you created. Specify only one subnet per Availability Zone. 

    $ aws cloudhsmv2 create-cluster --hsm-type hsm2m.medium \
                    --backup-retention-policy Type=DAYS,Value=<number of days> \
                    --subnet-ids <subnet ID> \
                    --mode <FIPS> \
                    --network-type <IPV4>

{
    "Cluster": {
        "BackupPolicy": "DEFAULT",
        "BackupRetentionPolicy": {
            "Type": "DAYS",
            "Value": 90
         },
        "VpcId": "vpc-50ae0636",
        "SubnetMapping": {
            "us-west-2b": "subnet-49a1bc00",
            "us-west-2c": "subnet-6f950334",
            "us-west-2a": "subnet-fd54af9b"
        },
        "SecurityGroup": "sg-6cb2c216",
        "HsmType": "hsm2m.medium",
        "NetworkType": "IPV4",
        "Certificates": {},
        "State": "CREATE_IN_PROGRESS",
        "Hsms": [],
        "ClusterId": "cluster-igklspoyj5v",
        "ClusterMode": "FIPS",
        "CreateTimestamp": 1502423370.069
    }
}
    Note

    ClusterMode is a required parameter for all hsm types except hsm1.medium.--mode:

    $ aws cloudhsmv2 create-cluster --hsm-type hsm2m.medium \
  				--backup-retention-policy Type=DAYS,Value=<number of days> \
  				--subnet-ids <subnet ID> \
				--mode NON_FIPS

If your attempts to create a cluster fail, it might be related to problems with the AWS CloudHSM service-linked roles. For help on resolving the failure, see Resolving AWS CloudHSM cluster creation failures.

AWS CloudHSM API
To create a cluster (AWS CloudHSM API)

  • Send a CreateCluster request. Specify the HSM instance type, the backup retention policy, and the subnet IDs of the subnets where you plan to create HSMs. Use the subnet IDs of the private subnets that you created. Specify only one subnet per Availability Zone.

If your attempts to create a cluster fail, it might be related to problems with the AWS CloudHSM service-linked roles. For help on resolving the failure, see Resolving AWS CloudHSM cluster creation failures.