AWS::MediaConnect::Flow Source - AWS CloudFormation
SyntaxProperties

AWS::MediaConnect::Flow Source

The details of the sources of the flow.

If you are creating a flow with a VPC source, you must first create the flow with a temporary standard source by doing the following:

  1. Use CloudFormation to create a flow with a standard source that uses the flow’s public IP address.

  2. Use CloudFormation to create the VPC interface to add to this flow. This can also be done as part of the previous step.

  3. After CloudFormation has created the flow and the VPC interface, update the source to point to the VPC interface that you created.

Syntax

To declare this entity in your AWS CloudFormation template, use the following syntax:

JSON

{
  "Decryption" : Encryption,
  "Description" : String,
  "EntitlementArn" : String,
  "GatewayBridgeSource" : GatewayBridgeSource,
  "IngestIp" : String,
  "IngestPort" : Integer,
  "MaxBitrate" : Integer,
  "MaxLatency" : Integer,
  "MaxSyncBuffer" : Integer,
  "MediaStreamSourceConfigurations" : [ MediaStreamSourceConfiguration, ... ],
  "MinLatency" : Integer,
  "Name" : String,
  "Protocol" : String,
  "SenderControlPort" : Integer,
  "SenderIpAddress" : String,
  "SourceArn" : String,
  "SourceIngestPort" : String,
  "SourceListenerAddress" : String,
  "SourceListenerPort" : Integer,
  "StreamId" : String,
  "VpcInterfaceName" : String,
  "WhitelistCidr" : String
}

Properties

Decryption

The type of encryption that is used on the content ingested from the source.

Required: No

Type: Encryption

Update requires: No interruption

Description

A description of the source. This description is not visible outside of the current AWS account.

Required: No

Type: String

Update requires: No interruption

EntitlementArn

The ARN of the entitlement that allows you to subscribe to content that comes from another AWS account. The entitlement is set by the content originator and the ARN is generated as part of the originator’s flow.

Required: No

Type: String

Update requires: No interruption

GatewayBridgeSource

The source configuration for cloud flows receiving a stream from a bridge.

Required: No

Type: GatewayBridgeSource

Update requires: No interruption

IngestIp

The IP address that the flow listens on for incoming content.

Required: No

Type: String

Update requires: No interruption

IngestPort

The port that the flow listens on for incoming content. If the protocol of the source is Zixi, the port must be set to 2088.

Required: No

Type: Integer

Update requires: No interruption

MaxBitrate

The maximum bitrate for RIST, RTP, and RTP-FEC streams.

Required: No

Type: Integer

Update requires: No interruption

MaxLatency

The maximum latency in milliseconds for a RIST or Zixi-based source.

Required: No

Type: Integer

Update requires: No interruption

MaxSyncBuffer

The size of the buffer (in milliseconds) to use to sync incoming source data.

Required: No

Type: Integer

Update requires: No interruption

MediaStreamSourceConfigurations

The media stream that is associated with the source, and the parameters for that association.

Required: No

Type: Array of MediaStreamSourceConfiguration

Update requires: No interruption

MinLatency

The minimum latency in milliseconds for SRT-based streams. In streams that use the SRT protocol, this value that you set on your MediaConnect source or output represents the minimal potential latency of that connection. The latency of the stream is set to the highest number between the sender’s minimum latency and the receiver’s minimum latency.

Required: No

Type: Integer

Update requires: No interruption

Name

The name of the source.

Required: No

Type: String

Update requires: Replacement

Protocol

The protocol that is used by the source. AWS CloudFormation does not currently support CDI or ST 2110 JPEG XS source protocols.

Note

AWS Elemental MediaConnect no longer supports the Fujitsu QoS protocol. This reference is maintained for legacy purposes only.

Required: No

Type: String

Allowed values: zixi-push | rtp-fec | rtp | rist | fujitsu-qos | srt-listener | srt-caller | st2110-jpegxs | cdi

Update requires: No interruption

SenderControlPort

The port that the flow uses to send outbound requests to initiate connection with the sender.

Required: No

Type: Integer

Update requires: No interruption

SenderIpAddress

The IP address that the flow communicates with to initiate connection with the sender.

Required: No

Type: String

Update requires: No interruption

SourceArn

The ARN of the source.

Required: No

Type: String

Update requires: No interruption

SourceIngestPort

The port that the flow listens on for incoming content. If the protocol of the source is Zixi, the port must be set to 2088.

Required: No

Type: String

Update requires: No interruption

SourceListenerAddress

Source IP or domain name for SRT-caller protocol.

Required: No

Type: String

Update requires: No interruption

SourceListenerPort

Source port for SRT-caller protocol.

Required: No

Type: Integer

Update requires: No interruption

StreamId

The stream ID that you want to use for the transport. This parameter applies only to Zixi-based streams.

Required: No

Type: String

Update requires: No interruption

VpcInterfaceName

The name of the VPC interface that the source content comes from.

Required: No

Type: String

Update requires: No interruption

WhitelistCidr

The range of IP addresses that are allowed to contribute content to your source. Format the IP addresses as a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.

Required: No

Type: String

Update requires: No interruption