CodePipeline Beispiele für die Verwendung von Tools für PowerShell

Die folgenden Codebeispiele zeigen Ihnen, wie Sie mithilfe von AWS Tools for PowerShell with Aktionen ausführen und allgemeine Szenarien implementieren CodePipeline.

Aktionen sind Codeauszüge aus größeren Programmen und müssen im Kontext ausgeführt werden. Aktionen zeigen Ihnen zwar, wie Sie einzelne Servicefunktionen aufrufen, aber Sie können Aktionen im Kontext der zugehörigen Szenarien sehen.

Jedes Beispiel enthält einen Link zum vollständigen Quellcode, in dem Sie Anweisungen zum Einrichten und Ausführen des Codes im Kontext finden.

Themen

Aktionen

Aktionen

Das folgende Codebeispiel zeigt die VerwendungConfirm-CPJob.

Tools für PowerShell

Beispiel 1: In diesem Beispiel wird der Status des angegebenen Jobs abgerufen.


Confirm-CPJob -JobId f570dc12-5ef3-44bc-945a-6e133EXAMPLE -Nonce 3

Ausgabe:


Value
-----
InProgress

APIEinzelheiten finden Sie unter AcknowledgeJob AWS Tools for PowerShellCmdlet-Referenz.

Das folgende Codebeispiel zeigt, wie Sie es verwenden. Disable-CPStageTransition

Tools für PowerShell

Beispiel 1: In diesem Beispiel wird der eingehende Übergang für die angegebene Phase in der angegebenen Pipeline deaktiviert.


Disable-CPStageTransition -PipelineName CodePipelineDemo -Reason "Disabling temporarily." -StageName Beta -TransitionType Inbound

APIEinzelheiten finden Sie unter DisableStageTransition AWS Tools for PowerShellCmdlet-Referenz.

Das folgende Codebeispiel zeigt, wie Sie es verwenden. Enable-CPStageTransition

Tools für PowerShell

Beispiel 1: In diesem Beispiel wird der eingehende Übergang für die angegebene Phase in der angegebenen Pipeline aktiviert.


Enable-CPStageTransition -PipelineName CodePipelineDemo -StageName Beta -TransitionType Inbound

APIEinzelheiten finden Sie unter EnableStageTransition AWS Tools for PowerShellCmdlet-Referenz.

Das folgende Codebeispiel zeigt, wie Sie es verwenden. Get-CPActionType

Tools für PowerShell

Beispiel 1: In diesem Beispiel werden Informationen über alle verfügbaren Aktionen für den angegebenen Besitzer abgerufen.


ForEach ($actionType in (Get-CPActionType -ActionOwnerFilter AWS)) {
  Write-Output ("For Category = " + $actionType.Id.Category + ", Owner = " + $actionType.Id.Owner + ", Provider = " + $actionType.Id.Provider + ", Version = " + $actionType.Id.Version + ":")
  Write-Output ("  ActionConfigurationProperties:")
  ForEach ($acp in $actionType.ActionConfigurationProperties) {
    Write-Output ("    For " + $acp.Name + ":")
    Write-Output ("      Description = " + $acp.Description)
    Write-Output ("      Key = " + $acp.Key)
    Write-Output ("      Queryable = " + $acp.Queryable)
    Write-Output ("      Required = " + $acp.Required)
    Write-Output ("      Secret = " + $acp.Secret)
  }
  Write-Output ("  InputArtifactDetails:")
  Write-Output ("    MaximumCount = " + $actionType.InputArtifactDetails.MaximumCount)
  Write-Output ("    MinimumCount = " + $actionType.InputArtifactDetails.MinimumCount)
  Write-Output ("  OutputArtifactDetails:")
  Write-Output ("    MaximumCount = " + $actionType.OutputArtifactDetails.MaximumCount)
  Write-Output ("    MinimumCount = " + $actionType.OutputArtifactDetails.MinimumCount)
  Write-Output ("  Settings:")
  Write-Output ("    EntityUrlTemplate = " + $actionType.Settings.EntityUrlTemplate)
  Write-Output ("    ExecutionUrlTemplate = " + $actionType.Settings.ExecutionUrlTemplate)
}

Ausgabe:


For Category = Deploy, Owner = AWS, Provider = ElasticBeanstalk, Version = 1:
  ActionConfigurationProperties:
    For ApplicationName:
      Description = The AWS Elastic Beanstalk Application name
      Key = True
      Queryable = False
      Required = True
      Secret = False
    For EnvironmentName:
      Description = The AWS Elastic Beanstalk Environment name
      Key = True
      Queryable = False
      Required = True
      Secret = False
  InputArtifactDetails:
    MaximumCount = 1
    MinimumCount = 1
  OutputArtifactDetails:
    MaximumCount = 0
    MinimumCount = 0
  Settings:
    EntityUrlTemplate = https://console.aws.amazon.com/elasticbeanstalk/r/application/{Config:ApplicationName}
    ExecutionUrlTemplate = https://console.aws.amazon.com/elasticbeanstalk/r/application/{Config:ApplicationName} 
For Category = Deploy, Owner = AWS, Provider = CodeDeploy, Version = 1:
  ActionConfigurationProperties:
    For ApplicationName:
      Description = The AWS CodeDeploy Application name
      Key = True
      Queryable = False
      Required = True
      Secret = False
    For DeploymentGroupName:
      Description = The AWS CodeDeploy Deployment Group name
      Key = True
      Queryable = False
      Required = True
      Secret = False
  InputArtifactDetails:
    MaximumCount = 1
    MinimumCount = 1
  OutputArtifactDetails:
    MaximumCount = 0
    MinimumCount = 0
  Settings:
    EntityUrlTemplate = https://console.aws.amazon.com/codedeploy/home?#/applications/{Config:ApplicationName}/deployment-groups/{Config:DeploymentGroupName}
    ExecutionUrlTemplate = https://console.aws.amazon.com/codedeploy/home?#/deployments/{ExternalExecutionId}

APIEinzelheiten finden Sie unter ListActionTypes AWS Tools for PowerShellCmdlet-Referenz.

Das folgende Codebeispiel zeigt, wie Sie es verwenden. Get-CPActionableJobList

Tools für PowerShell

Beispiel 1: In diesem Beispiel werden Informationen über alle Aufträge abgerufen, für die eine Aktion in der angegebenen Kategorie, dem Besitzer, dem Anbieter, der Version und den Abfrageparametern ausgeführt werden kann.


Get-CPActionableJobList -ActionTypeId_Category Build -ActionTypeId_Owner Custom -ActionTypeId_Provider MyCustomProviderName -ActionTypeId_Version 1 -QueryParam @{"ProjectName" = "MyProjectName"}

Ausgabe:


AccountId       Data                                 Id                                      Nonce
---------       ----                                 --                                      -----
80398EXAMPLE    Amazon.CodePipeline.Model.JobData    0de392f5-712d-4f41-ace3-f57a0EXAMPLE    3

APIEinzelheiten finden Sie unter PollForJobs AWS Tools for PowerShellCmdlet-Referenz.

Das folgende Codebeispiel zeigt, wie Sie es verwenden. Get-CPJobDetail

Tools für PowerShell

Beispiel 1: In diesem Beispiel werden allgemeine Informationen über den angegebenen Job abgerufen.


Get-CPJobDetail -JobId f570dc12-5ef3-44bc-945a-6e133EXAMPLE

Ausgabe:


AccountId       Data                                 Id
---------       ----                                 --
80398EXAMPLE    Amazon.CodePipeline.Model.JobData    f570dc12-5ef3-44bc-945a-6e133EXAMPLE

Beispiel 2: In diesem Beispiel werden detaillierte Informationen über den angegebenen Job abgerufen.


$jobDetails = Get-CPJobDetail -JobId f570dc12-5ef3-44bc-945a-6e133EXAMPLE
Write-Output ("For Job " + $jobDetails.Id + ":")
Write-Output ("  AccountId = " + $jobDetails.AccountId)
$jobData = $jobDetails.Data
Write-Output ("  Configuration:")
ForEach ($key in $jobData.ActionConfiguration.Keys) {
  $value = $jobData.ActionConfiguration.$key
  Write-Output ("    " + $key + " = " + $value)
}
Write-Output ("  ActionTypeId:")
Write-Output ("    Category = " + $jobData.ActionTypeId.Category)
Write-Output ("    Owner = " + $jobData.ActionTypeId.Owner)
Write-Output ("    Provider = " + $jobData.ActionTypeId.Provider)
Write-Output ("    Version = " + $jobData.ActionTypeId.Version)
Write-Output ("  ArtifactCredentials:")
Write-Output ("    AccessKeyId = " + $jobData.ArtifactCredentials.AccessKeyId)
Write-Output ("    SecretAccessKey = " + $jobData.ArtifactCredentials.SecretAccessKey)
Write-Output ("    SessionToken = " + $jobData.ArtifactCredentials.SessionToken)
Write-Output ("  InputArtifacts:")
ForEach ($ia in $jobData.InputArtifacts) {
  Write-Output ("    " + $ia.Name)
}
Write-Output ("  OutputArtifacts:")
ForEach ($oa in $jobData.OutputArtifacts) {
  Write-Output ("    " + $oa.Name)
}
Write-Output ("  PipelineContext:")
$context = $jobData.PipelineContext
Write-Output ("    Name = " + $context.Action.Name)
Write-Output ("    PipelineName = " + $context.PipelineName)
Write-Output ("    Stage = " + $context.Stage.Name)

Ausgabe:


For Job f570dc12-5ef3-44bc-945a-6e133EXAMPLE:
  AccountId = 80398EXAMPLE
  Configuration:
  ActionTypeId:
    Category = Build
    Owner = Custom
    Provider = MyCustomProviderName
    Version = 1
  ArtifactCredentials:
    AccessKeyId = ASIAIEI3...IXI6YREX
    SecretAccessKey = cqAFDhEi...RdQyfa2u
    SessionToken = AQoDYXdz...5u+lsAU=
  InputArtifacts:
    MyApp
  OutputArtifacts:
    MyAppBuild
  PipelineContext:
    Name = Build
    PipelineName = CodePipelineDemo
    Stage = Build

APIEinzelheiten finden Sie unter GetJobDetails AWS Tools for PowerShellCmdlet-Referenz.

Das folgende Codebeispiel zeigt, wie Sie es verwenden. Get-CPPipeline

Tools für PowerShell

Beispiel 1: In diesem Beispiel werden allgemeine Informationen über die angegebene Pipeline abgerufen.


Get-CPPipeline -Name CodePipelineDemo -Version 1

Ausgabe:


ArtifactStore : Amazon.CodePipeline.Model.ArtifactStore
Name          : CodePipelineDemo
RoleArn       : arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole
Stages        : {Source, Build, Beta, TestStage}
Version       : 1

Beispiel 2: In diesem Beispiel werden detaillierte Informationen über die angegebene Pipeline abgerufen.


$pipeline = Get-CPPipeline -Name CodePipelineDemo
Write-Output ("Name = " + $pipeline.Name)
Write-Output ("RoleArn = " + $pipeline.RoleArn)
Write-Output ("Version = " + $pipeline.Version)
Write-Output ("ArtifactStore:")
Write-Output ("  Location = " + $pipeline.ArtifactStore.Location)
Write-Output ("  Type = " + $pipeline.ArtifactStore.Type.Value)
Write-Output ("Stages:")
ForEach ($stage in $pipeline.Stages) {
  Write-Output ("  Name = " + $stage.Name)
  Write-Output ("    Actions:")
  ForEach ($action in $stage.Actions) {
    Write-Output ("      Name = " + $action.Name)
	Write-Output ("        Category = " + $action.ActionTypeId.Category)
	Write-Output ("        Owner = " + $action.ActionTypeId.Owner)
	Write-Output ("        Provider = " + $action.ActionTypeId.Provider)
	Write-Output ("        Version = " + $action.ActionTypeId.Version)
	Write-Output ("        Configuration:")
	ForEach ($key in $action.Configuration.Keys) {
	  $value = $action.Configuration.$key
	  Write-Output ("          " + $key + " = " + $value)
	}
	Write-Output ("        InputArtifacts:")
	ForEach ($ia in $action.InputArtifacts) {
	  Write-Output ("          " + $ia.Name)
	}
	ForEach ($oa in $action.OutputArtifacts) {
	  Write-Output ("          " + $oa.Name)
	}
	Write-Output ("        RunOrder = " + $action.RunOrder)
  }
}

Ausgabe:


Name = CodePipelineDemo
RoleArn = arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole
Version = 3
ArtifactStore:
  Location = MyBucketName
  Type = S3
Stages:
  Name = Source
    Actions:
      Name = Source
        Category = Source
        Owner = ThirdParty
        Provider = GitHub
        Version = 1
        Configuration:
          Branch = master
          OAuthToken = ****
          Owner = my-user-name
          Repo = MyRepoName
        InputArtifacts:
          MyApp
        RunOrder = 1
  Name = Build
    Actions:
      Name = Build
        Category = Build
        Owner = Custom
        Provider = MyCustomProviderName
        Version = 1
        Configuration:
          ProjectName = MyProjectName
        InputArtifacts:
          MyApp
          MyAppBuild
        RunOrder = 1
  Name = Beta
    Actions:
      Name = CodePipelineDemoFleet
        Category = Deploy
        Owner = AWS
        Provider = CodeDeploy
        Version = 1
        Configuration:
          ApplicationName = CodePipelineDemoApplication
          DeploymentGroupName = CodePipelineDemoFleet
        InputArtifacts:
          MyAppBuild
        RunOrder = 1
  Name = TestStage
    Actions:
      Name = MyJenkinsTestAction
        Category = Test
        Owner = Custom
        Provider = MyCustomTestProvider
        Version = 1
        Configuration:
          ProjectName = MyJenkinsProjectName
        InputArtifacts:
          MyAppBuild
        RunOrder = 1

APIEinzelheiten finden Sie unter GetPipeline AWS Tools for PowerShellCmdlet-Referenz.

Das folgende Codebeispiel zeigt, wie Sie es verwenden. Get-CPPipelineList

Tools für PowerShell

Beispiel 1: In diesem Beispiel wird eine Liste der verfügbaren Pipelines abgerufen.


Get-CPPipelineList

Ausgabe:


Created                  Name                Updated                  Version
-------                  ----                -------                  -------
8/13/2015 10:17:54 PM    CodePipelineDemo    8/13/2015 10:17:54 PM    3
7/8/2015 2:41:53 AM      MyFirstPipeline     7/22/2015 9:06:37 PM     7

APIEinzelheiten finden Sie unter ListPipelines AWS Tools for PowerShellCmdlet-Referenz.

Das folgende Codebeispiel zeigt, wie Sie es verwenden. Get-CPPipelineState

Tools für PowerShell

Beispiel 1: In diesem Beispiel werden allgemeine Informationen zu den Phasen der angegebenen Pipeline abgerufen.


Get-CPPipelineState -Name CodePipelineDemo

Ausgabe:


Created         : 8/13/2015 10:17:54 PM
PipelineName    : CodePipelineDemo
PipelineVersion : 1
StageStates     : {Source, Build, Beta, TestStage}
Updated         : 8/13/2015 10:17:54 PM

Beispiel 2: In diesem Beispiel werden detaillierte Informationen über den Status der angegebenen Pipeline abgerufen.


ForEach ($stageState in (Get-CPPipelineState -Name $arg).StageStates) {
  Write-Output ("For " + $stageState.StageName + ":")
  Write-Output ("  InboundTransitionState:")
  Write-Output ("    DisabledReason = " + $stageState.InboundTransitionState.DisabledReason)
  Write-Output ("    Enabled = " + $stageState.InboundTransitionState.Enabled)
  Write-Output ("    LastChangedAt = " + $stageState.InboundTransitionState.LastChangedAt)
  Write-Output ("    LastChangedBy = " + $stageState.InboundTransitionState.LastChangedBy)
  Write-Output ("  ActionStates:")
  ForEach ($actionState in $stageState.ActionStates) {
    Write-Output ("    For " + $actionState.ActionName + ":")
	Write-Output ("      CurrentRevision:")
    Write-Output ("        Created = " + $actionState.CurrentRevision.Created)
	Write-Output ("        RevisionChangeId = " + $actionState.CurrentRevision.RevisionChangeId)
	Write-Output ("        RevisionId = " + $actionState.CurrentRevision.RevisionId)
	Write-Output ("      EntityUrl = " + $actionState.EntityUrl)
	Write-Output ("      LatestExecution:")
    Write-Output ("        ErrorDetails:")
    Write-Output ("          Code = " + $actionState.LatestExecution.ErrorDetails.Code)
	Write-Output ("          Message = " + $actionState.LatestExecution.ErrorDetails.Message)
	Write-Output ("        ExternalExecutionId = " + $actionState.LatestExecution.ExternalExecutionId)
	Write-Output ("        ExternalExecutionUrl = " + $actionState.LatestExecution.ExternalExecutionUrl)
	Write-Output ("        LastStatusChange	= " + $actionState.LatestExecution.LastStatusChange)
	Write-Output ("        PercentComplete = " + $actionState.LatestExecution.PercentComplete)
	Write-Output ("        Status = " + $actionState.LatestExecution.Status)
	Write-Output ("        Summary = " + $actionState.LatestExecution.Summary)
	Write-Output ("      RevisionUrl = " + $actionState.RevisionUrl)
  }
}

Ausgabe:


For Source:
  InboundTransitionState:
    DisabledReason =
    Enabled =
    LastChangedAt =
    LastChangedBy =
  ActionStates:
    For Source:
      CurrentRevision:
        Created =
        RevisionChangeId =
        RevisionId =
      EntityUrl = https://github.com/my-user-name/MyRepoName/tree/master
      LatestExecution:
        ErrorDetails:
          Code =
          Message =
        ExternalExecutionId =
        ExternalExecutionUrl =
        LastStatusChange = 07/20/2015 23:28:45
        PercentComplete = 0
        Status = Succeeded
        Summary =
      RevisionUrl =
For Build:
  InboundTransitionState:
    DisabledReason =
    Enabled = True
    LastChangedAt = 01/01/0001 00:00:00
    LastChangedBy =
  ActionStates:
    For Build:
      CurrentRevision:
        Created =
        RevisionChangeId =
        RevisionId =
      EntityUrl = http://54.174.131.1EX/job/MyJenkinsDemo
      LatestExecution:
        ErrorDetails:
          Code = TimeoutError
          Message = The action failed because a job worker exceeded its time limit. If this is a custom action, make sure that the job worker is configured correctly.
        ExternalExecutionId =
        ExternalExecutionUrl =
        LastStatusChange = 07/21/2015 00:29:29
        PercentComplete = 0
        Status = Failed
        Summary =
      RevisionUrl =
For Beta:
  InboundTransitionState:
    DisabledReason =
    Enabled = True
    LastChangedAt = 01/01/0001 00:00:00
    LastChangedBy =
  ActionStates:
    For CodePipelineDemoFleet:
      CurrentRevision:
        Created =
        RevisionChangeId =
        RevisionId =
      EntityUrl = https://console.aws.amazon.com/codedeploy/home?#/applications/CodePipelineDemoApplication/deployment-groups/CodePipelineDemoFleet
      LatestExecution:
        ErrorDetails:
          Code =
          Message =
        ExternalExecutionId = d-D5LTCZXEX
        ExternalExecutionUrl = https://console.aws.amazon.com/codedeploy/home?#/deployments/d-D5LTCZXEX
        LastStatusChange = 07/08/2015 22:07:42
        PercentComplete = 0
        Status = Succeeded
        Summary = Deployment Succeeded
      RevisionUrl =
For TestStage:
  InboundTransitionState:
    DisabledReason =
    Enabled = True
    LastChangedAt = 01/01/0001 00:00:00
    LastChangedBy =
  ActionStates:
    For MyJenkinsTestAction25:
      CurrentRevision:
        Created =
        RevisionChangeId =
        RevisionId =
      EntityUrl = http://54.174.131.1EX/job/MyJenkinsDemo
      LatestExecution:
        ErrorDetails:
          Code =
          Message =
        ExternalExecutionId = 5
        ExternalExecutionUrl = http://54.174.131.1EX/job/MyJenkinsDemo/5
        LastStatusChange = 07/08/2015 22:09:03
        PercentComplete = 0
        Status = Succeeded
        Summary = Finished
      RevisionUrl =

APIEinzelheiten finden Sie unter GetPipelineState AWS Tools for PowerShellCmdlet-Referenz.

Das folgende Codebeispiel zeigt, wie Sie es verwenden. New-CPCustomActionType

Tools für PowerShell

Beispiel 1: In diesem Beispiel wird eine neue benutzerdefinierte Aktion mit den angegebenen Eigenschaften erstellt.


New-CPCustomActionType -Category Build -ConfigurationProperty @{"Description" = "The name of the build project must be provided when this action is added to the pipeline."; "Key" = $True; "Name" = "ProjectName"; "Queryable" = $False; "Required" = $True; "Secret" = $False; "Type" = "String"} -Settings_EntityUrlTemplate "https://my-build-instance/job/{Config:ProjectName}/" -Settings_ExecutionUrlTemplate "https://my-build-instance/job/mybuildjob/lastSuccessfulBuild{ExternalExecutionId}/" -InputArtifactDetails_MaximumCount 1 -OutputArtifactDetails_MaximumCount 1 -InputArtifactDetails_MinimumCount 0 -OutputArtifactDetails_MinimumCount 0 -Provider "MyBuildProviderName" -Version 1

Ausgabe:


ActionConfigurationProperties : {ProjectName}
Id                            : Amazon.CodePipeline.Model.ActionTypeId
InputArtifactDetails          : Amazon.CodePipeline.Model.ArtifactDetails
OutputArtifactDetails         : Amazon.CodePipeline.Model.ArtifactDetails
Settings                      : Amazon.CodePipeline.Model.ActionTypeSettings

APIEinzelheiten finden Sie unter CreateCustomActionType AWS Tools for PowerShellCmdlet-Referenz.

Das folgende Codebeispiel zeigt, wie Sie es verwenden. New-CPPipeline

Tools für PowerShell

Beispiel 1: In diesem Beispiel wird eine neue Pipeline mit den angegebenen Einstellungen erstellt.


$pipeline = New-Object Amazon.CodePipeline.Model.PipelineDeclaration

$sourceStageAction = New-Object Amazon.CodePipeline.Model.ActionDeclaration
$deployStageAction = New-Object Amazon.CodePipeline.Model.ActionDeclaration

$sourceStageActionOutputArtifact = New-Object Amazon.CodePipeline.Model.OutputArtifact
$sourceStageActionOutputArtifact.Name = "MyApp"

$sourceStageAction.ActionTypeId = @{"Category" = "Source"; "Owner" = "AWS"; "Provider" = "S3"; "Version" = 1}
$sourceStageAction.Configuration.Add("S3Bucket", "amzn-s3-demo-bucket")
$sourceStageAction.Configuration.Add("S3ObjectKey", "my-object-key-name.zip")
$sourceStageAction.OutputArtifacts.Add($sourceStageActionOutputArtifact)
$sourceStageAction.Name = "Source"

$deployStageActionInputArtifact = New-Object Amazon.CodePipeline.Model.InputArtifact
$deployStageActionInputArtifact.Name = "MyApp"

$deployStageAction.ActionTypeId = @{"Category" = "Deploy"; "Owner" = "AWS"; "Provider" = "CodeDeploy"; "Version" = 1}
$deployStageAction.Configuration.Add("ApplicationName", "CodePipelineDemoApplication")
$deployStageAction.Configuration.Add("DeploymentGroupName", "CodePipelineDemoFleet")
$deployStageAction.InputArtifacts.Add($deployStageActionInputArtifact)
$deployStageAction.Name = "CodePipelineDemoFleet"

$sourceStage = New-Object Amazon.CodePipeline.Model.StageDeclaration
$deployStage = New-Object Amazon.CodePipeline.Model.StageDeclaration

$sourceStage.Name = "Source"
$deployStage.Name = "Beta"

$sourceStage.Actions.Add($sourceStageAction)
$deployStage.Actions.Add($deployStageAction)

$pipeline.ArtifactStore = @{"Location" = "amzn-s3-demo-bucket"; "Type" = "S3"}
$pipeline.Name = "CodePipelineDemo"
$pipeline.RoleArn = "arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole"
$pipeline.Stages.Add($sourceStage)
$pipeline.Stages.Add($deployStage)
$pipeline.Version = 1

New-CPPipeline -Pipeline $pipeline

Ausgabe:


ArtifactStore : Amazon.CodePipeline.Model.ArtifactStore
Name          : CodePipelineDemo
RoleArn       : arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole
Stages        : {Source, Beta}
Version       : 1

APIEinzelheiten finden Sie unter CreatePipeline AWS Tools for PowerShellCmdlet-Referenz.

Das folgende Codebeispiel zeigt, wie Sie es verwenden. Remove-CPCustomActionType

Tools für PowerShell

Beispiel 1: In diesem Beispiel wird die angegebene benutzerdefinierte Aktion gelöscht. Der Befehl fordert Sie zur Bestätigung auf, bevor Sie fortfahren. Fügen Sie den Parameter -Force hinzu, um die benutzerdefinierte Aktion ohne Aufforderung zu löschen.


Remove-CPCustomActionType -Category Build -Provider MyBuildProviderName -Version 1

APIEinzelheiten finden Sie unter DeleteCustomActionType AWS Tools for PowerShellCmdlet-Referenz.

Das folgende Codebeispiel zeigt, wie Sie es verwenden. Remove-CPPipeline

Tools für PowerShell

Beispiel 1: In diesem Beispiel wird die angegebene Pipeline gelöscht. Der Befehl fordert Sie zur Bestätigung auf, bevor Sie fortfahren. Fügen Sie den Parameter -Force hinzu, um die Pipeline ohne Aufforderung zu löschen.


Remove-CPPipeline -Name CodePipelineDemo

APIEinzelheiten finden Sie unter DeletePipeline AWS Tools for PowerShellCmdlet-Referenz.

Das folgende Codebeispiel zeigt, wie Sie es verwenden. Start-CPPipelineExecution

Tools für PowerShell

Beispiel 1: In diesem Beispiel wird mit der Ausführung der angegebenen Pipeline begonnen.


Start-CPPipelineExecution -Name CodePipelineDemo

APIEinzelheiten finden Sie unter StartPipelineExecution AWS Tools for PowerShellCmdlet-Referenz.

Das folgende Codebeispiel zeigt, wie Sie es verwenden. Update-CPPipeline

Tools für PowerShell

Beispiel 1: In diesem Beispiel wird die angegebene bestehende Pipeline mit den angegebenen Einstellungen aktualisiert.


$pipeline = New-Object Amazon.CodePipeline.Model.PipelineDeclaration

$sourceStageAction = New-Object Amazon.CodePipeline.Model.ActionDeclaration
$deployStageAction = New-Object Amazon.CodePipeline.Model.ActionDeclaration

$sourceStageActionOutputArtifact = New-Object Amazon.CodePipeline.Model.OutputArtifact
$sourceStageActionOutputArtifact.Name = "MyApp"

$sourceStageAction.ActionTypeId = @{"Category" = "Source"; "Owner" = "AWS"; "Provider" = "S3"; "Version" = 1}
$sourceStageAction.Configuration.Add("S3Bucket", "amzn-s3-demo-bucket")
$sourceStageAction.Configuration.Add("S3ObjectKey", "my-object-key-name.zip")
$sourceStageAction.OutputArtifacts.Add($sourceStageActionOutputArtifact)
$sourceStageAction.Name = "Source"

$deployStageActionInputArtifact = New-Object Amazon.CodePipeline.Model.InputArtifact
$deployStageActionInputArtifact.Name = "MyApp"

$deployStageAction.ActionTypeId = @{"Category" = "Deploy"; "Owner" = "AWS"; "Provider" = "CodeDeploy"; "Version" = 1}
$deployStageAction.Configuration.Add("ApplicationName", "CodePipelineDemoApplication")
$deployStageAction.Configuration.Add("DeploymentGroupName", "CodePipelineDemoFleet")
$deployStageAction.InputArtifacts.Add($deployStageActionInputArtifact)
$deployStageAction.Name = "CodePipelineDemoFleet"

$sourceStage = New-Object Amazon.CodePipeline.Model.StageDeclaration
$deployStage = New-Object Amazon.CodePipeline.Model.StageDeclaration

$sourceStage.Name = "MyInputFiles"
$deployStage.Name = "MyTestDeployment"

$sourceStage.Actions.Add($sourceStageAction)
$deployStage.Actions.Add($deployStageAction)

$pipeline.ArtifactStore = @{"Location" = "amzn-s3-demo-bucket"; "Type" = "S3"}
$pipeline.Name = "CodePipelineDemo"
$pipeline.RoleArn = "arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole"
$pipeline.Stages.Add($sourceStage)
$pipeline.Stages.Add($deployStage)
$pipeline.Version = 1

Update-CPPipeline -Pipeline $pipeline

Ausgabe:


ArtifactStore : Amazon.CodePipeline.Model.ArtifactStore
Name          : CodePipelineDemo
RoleArn       : arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole
Stages        : {InputFiles, TestDeployment}
Version       : 2

APIEinzelheiten finden Sie unter UpdatePipeline AWS Tools for PowerShellCmdlet-Referenz.

Warnung JavaScript ist in Ihrem Browser nicht verfügbar oder deaktiviert.

Zur Nutzung der AWS-Dokumentation muss JavaScript aktiviert sein. Weitere Informationen finden auf den Hilfe-Seiten Ihres Browsers.

Dokumentkonventionen

CodeDeploy

Amazon Cognito Identity