AllocateConnectionOnInterconnect
Note
Deprecated. Use AllocateHostedConnection instead.
Creates a hosted connection on an interconnect.
Allocates a VLAN number and a specified amount of bandwidth for use by a hosted connection on the specified interconnect.
Note
Intended for use by AWS Direct Connect Partners only.
Request Syntax
{
"bandwidth": "string
",
"connectionName": "string
",
"interconnectId": "string
",
"ownerAccount": "string
",
"vlan": number
}
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters.
The request accepts the following data in JSON format.
- bandwidth
-
The bandwidth of the connection. The possible values are 50Mbps, 100Mbps, 200Mbps, 300Mbps, 400Mbps, 500Mbps, 1Gbps, 2Gbps, 5Gbps, and 10Gbps. Note that only those AWS Direct Connect Partners who have met specific requirements are allowed to create a 1Gbps, 2Gbps, 5Gbps or 10Gbps hosted connection.
Type: String
Required: Yes
- connectionName
-
The name of the provisioned connection.
Type: String
Required: Yes
- interconnectId
-
The ID of the interconnect on which the connection will be provisioned.
Type: String
Required: Yes
- ownerAccount
-
The ID of the AWS account of the customer for whom the connection will be provisioned.
Type: String
Required: Yes
- vlan
-
The dedicated VLAN provisioned to the connection.
Type: Integer
Required: Yes
Response Syntax
{
"awsDevice": "string",
"awsDeviceV2": "string",
"awsLogicalDeviceId": "string",
"bandwidth": "string",
"connectionId": "string",
"connectionName": "string",
"connectionState": "string",
"encryptionMode": "string",
"hasLogicalRedundancy": "string",
"jumboFrameCapable": boolean,
"lagId": "string",
"loaIssueTime": number,
"location": "string",
"macSecCapable": boolean,
"macSecKeys": [
{
"ckn": "string",
"secretARN": "string",
"startOn": "string",
"state": "string"
}
],
"ownerAccount": "string",
"partnerName": "string",
"portEncryptionStatus": "string",
"providerName": "string",
"region": "string",
"tags": [
{
"key": "string",
"value": "string"
}
],
"vlan": number
}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
- awsDevice
-
This parameter has been deprecated.
The Direct Connect endpoint on which the physical connection terminates.
Type: String
- awsDeviceV2
-
The Direct Connect endpoint that terminates the physical connection.
Type: String
- awsLogicalDeviceId
-
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
Type: String
- bandwidth
-
The bandwidth of the connection.
Type: String
- connectionId
-
The ID of the connection.
Type: String
- connectionName
-
The name of the connection.
Type: String
- connectionState
-
The state of the connection. The following are the possible values:
-
ordering
: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order. -
requested
: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer. -
pending
: The connection has been approved and is being initialized. -
available
: The network link is up and the connection is ready for use. -
down
: The network link is down. -
deleting
: The connection is being deleted. -
deleted
: The connection has been deleted. -
rejected
: A hosted connection in theordering
state enters therejected
state if it is deleted by the customer. -
unknown
: The state of the connection is not available.
Type: String
Valid Values:
ordering | requested | pending | available | down | deleting | deleted | rejected | unknown
-
- encryptionMode
-
The MAC Security (MACsec) connection encryption mode.
The valid values are
no_encrypt
,should_encrypt
, andmust_encrypt
.Type: String
- hasLogicalRedundancy
-
Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
Type: String
Valid Values:
unknown | yes | no
- jumboFrameCapable
-
Indicates whether jumbo frames are supported.
Type: Boolean
- lagId
-
The ID of the LAG.
Type: String
- loaIssueTime
-
The time of the most recent call to DescribeLoa for this connection.
Type: Timestamp
- location
-
The location of the connection.
Type: String
- macSecCapable
-
Indicates whether the connection supports MAC Security (MACsec).
Type: Boolean
- macSecKeys
-
The MAC Security (MACsec) security keys associated with the connection.
Type: Array of MacSecKey objects
- ownerAccount
-
The ID of the AWS account that owns the connection.
Type: String
- partnerName
-
The name of the AWS Direct Connect service provider associated with the connection.
Type: String
- portEncryptionStatus
-
The MAC Security (MACsec) port link status of the connection.
The valid values are
Encryption Up
, which means that there is an active Connection Key Name, orEncryption Down
.Type: String
- providerName
-
The name of the service provider associated with the connection.
Type: String
- region
-
The AWS Region where the connection is located.
Type: String
-
The tags associated with the connection.
Type: Array of Tag objects
Array Members: Minimum number of 1 item.
- vlan
-
The ID of the VLAN.
Type: Integer
Errors
For information about the errors that are common to all actions, see Common Errors.
- DirectConnectClientException
-
One or more parameters are not valid.
HTTP Status Code: 400
- DirectConnectServerException
-
A server-side error occurred.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following: