Create an internal Classic Load Balancer

Open the Amazon EC2 console at https://console.aws.amazon.com/ec2/.

On the navigation bar, choose a Region for your load balancer. Be sure to select the same Region that you selected for your EC2 instances.

On the navigation pane, under Load Balancing, choose Load Balancers.

Choose Create Load Balancer.

Expand the Classic Load Balancer section, then choose Create.

Basic configuration

1. For Load balancer name, type a name for your load balancer.

   The name of your Classic Load Balancer must be unique within your set of Classic Load Balancers for the Region, can have a maximum of 32 characters, can contain only alphanumeric characters and hyphens, and must not begin or end with a hyphen.

2. For Scheme, select Internal.

Network mapping

1. For VPC, select the same VPC that you selected for your instances.

2. For Mappings, first select an Availability Zone, then choose a subnet from its available subnets. You can only select one subnet per Availability Zone. To improve the availability of your load balancer, select more than one Availability Zone and subnet.

For Security groups, select an existing security group that is configured to allow the required HTTP traffic on port 80. Or you can create a new security group if your application uses different protocols and ports.

Listeners and routing

1. For Listener, ensure the protocol is HTTP and the port is 80.

2. For Instance, ensure the protocol is HTTP and the port is 80.

Health checks

1. For Ping Protocol, the default is HTTP.

2. For Ping Port, the default is 80.

3. For Ping Path, the default is /.

4. For Advanced health check settings, use the default values or enter values specific to your application.

Instances

1. Select Add instances, to bring up the instance selection screen.

2. Under Available instances, you can select from the current instances that are available to the load balancer, based on the network settings selected before.

3. After you're satisfied with your selections, select Confirm to add the instances to be registered to the load balancer.

Attributes

1. For Enable cross-zone load balancing, Enable connection draining, and Timeout (draining interval) keep the default values.

Load balancer tags (optional)

1. The Key field is required.

2. The Value field is optional.

3. To add another tag, select Add new tag then input your values into the Key field, and optionally the Value field.

4. To remove an existing tag, select Remove next to the tag you want to remove.

Summary and creation

1. If you need to change any settings, select Edit next to the setting needing to be changed.

2. After you're satisfied with all the settings shown in the summary, select Create load balancer to begin creation of your load balancer.

3. On the final creation page, select View load balancer to view your load balancer in the Amazon EC2 console.

Verify

1. Select your new load balancer.

2. On the Target instances tab, check the Health status column. After at least one of your EC2 instances is In-service, you can test your load balancer.

3. In the Details section, copy the load balancers DNS name, which would look similar to my-load-balancer-1234567890.us-east-1.elb.amazonaws.com.

4. Paste your load balancers DNS name into the address field of a public internet connected web browser. If your load balancer is functioning correctly, you will see the default page of your server.

Delete (optional)

1. If you have a CNAME record for your domain that points to your load balancer, point it to a new location and wait for the DNS change to take effect before deleting your load balancer.

2. Open the Amazon EC2 console at https://console.aws.amazon.com/ec2/.

3. Select the load balancer.

4. Choose Actions, Delete load balancer.

5. When prompted for confirmation, type confirm then select Delete.

6. After you delete a load balancer, the EC2 instances that were registered with the load balancer continue to run. You will be billed for each partial or full hour that they continue running. When you no longer need an EC2 instance, you can stop or terminate it to prevent incurring additional charges.

Use the create-load-balancer command with the --scheme option set to internal, as follows:

aws elb create-load-balancer --load-balancer-name my-internal-loadbalancer --listeners Protocol=HTTP,LoadBalancerPort=80,InstanceProtocol=HTTP,InstancePort=80
 --subnets subnet-4e05f721 --scheme internal --security-groups sg-b9ffedd5

The following is an example response. Note that the name indicates that this is an internal load balancer.

{
    "DNSName": "internal-my-internal-loadbalancer-786501203.us-west-2.elb.amazonaws.com"
}

Use the following register-instances-with-load-balancer command to add instances:

aws elb register-instances-with-load-balancer --load-balancer-name my-internal-loadbalancer --instances i-4f8cf126 i-0bb7ca62

The following is an example response:

{
    "Instances": [
        {
            "InstanceId": "i-4f8cf126"
        },
        {
            "InstanceId": "i-0bb7ca62"
        }
    ]
}

(Optional) Use the following describe-load-balancers command to verify the internal load balancer:

aws elb describe-load-balancers --load-balancer-name my-internal-loadbalancer

The response includes the DNSName and Scheme fields, which indicate that this is an internal load balancer.

{
    "LoadBalancerDescriptions": [
        {
            ...
            "DNSName": "internal-my-internal-loadbalancer-1234567890.us-west-2.elb.amazonaws.com", 
            "SecurityGroups": [
                "sg-b9ffedd5"
            ], 
            "Policies": {
                "LBCookieStickinessPolicies": [], 
                "AppCookieStickinessPolicies": [], 
                "OtherPolicies": []
            }, 
            "LoadBalancerName": "my-internal-loadbalancer", 
            "CreatedTime": "2014-05-22T20:32:19.920Z", 
            "AvailabilityZones": [
                "us-west-2a"
            ], 
            "Scheme": "internal",
            ...
        }
    ]
}