Connect to a MySQL data source - Amazon Managed Grafana

Connect to a MySQL data source

Add the MySQL data source to be able to query and visualize data from a MySQL compatible database.

Important

Grafana version 8.0 changes the underlying data structure for data frames for the MySQL, Postgres, and Microsoft SQL Server data sources. As a result, a time series query result is returned in a wide format. For more information, see Wide format in the Grafana data frames documentation.

To make your visualizations work as they did before, you might have to do some manual migrations. One solution is documented on Github at Postgres/MySQL/MSSQL: Breaking change in v8.0 related to time series queries and ordering of data column.

Adding the data source

  1. Open the side menu by choosing the Grafana icon in the top header.

  2. In the side menu under the Dashboards link, you should find a link named Data Sources.

  3. Choose the + Add data source button in the top header.

  4. Select MySQL from the Type dropdown list.

Data source options

Name Description
Name The data source name. This is how you see the data source in panels and queries.
Default Default data source means that it will be pre-selected for new panels.
Host The IP address/hostname and optional port of your MySQL instance.
Database Name of your MySQL database.
User Database user’s login/username.
Password Database user’s password.
Max open The maximum number of open connections to the database, default unlimited (Grafana v5.4+).
Max idle The maximum number of connections in the idle connection pool, default 2 (Grafana v5.4+).
Max lifetime The maximum amount of time in seconds a connection can be reused, default 14400/4 hours. This should always be lower than configured wait_timeout in MySQL (Grafana v5.4+).

Min time interval

A lower limit for the $_interval $_interval_ms variables. Recommended to be set to write frequency, for example 1m if your data is written every minute. This option can also be overridden/configured in a dashboard panel under data source options. This value must be formatted as a number followed by a valid time identifier; for example, 1m (1 minute) or 30s (30 seconds). The following time identifiers are supported.

Identifier Description
y Year
M Month
w Week
d Day
h Hour
m Minute
s Second
ms Millisecond

Database user permissions

Important

The database user that you specify when you add the data source should be granted only SELECT permissions on the specified database and tables that you want to query. Grafana does not validate that the query is safe. The query could include any SQL statement. For example, statements such as USE otherdb; and DROP TABLE user; would be run. To protect against this, we strongly recommend that you create a specific MySQL user with restricted permissions.

The following code example shows creating a specific MySQL user with restricted permissions.

CREATE USER 'grafanaReader' IDENTIFIED BY 'password'; GRANT SELECT ON mydatabase.mytable TO 'grafanaReader';

To grant access to more databases and tables, you can use wildcard characters (*) in place of database or table if you want.

Query editor

You find the MySQL query editor in the metrics tab in a panel’s edit mode. You enter edit mode by choosing the panel title, then Edit.

The query editor has a Generated SQL link that shows up after a query has been run, while in panel edit mode. Choose it, and it will expand and show the raw interpolated SQL string that was run.

Select table, time column, and metric column (FROM)

When you enter edit mode for the first time or add a new query, Grafana will try to prefill the query builder with the first table that has a timestamp column and a numeric column.

In the FROM field, Grafana will suggest tables that are in the configured database. To select a table or view in another database that your database user has access to, you can manually enter a fully qualified name (database.table) such as otherDb.metrics.

The Time column field refers to the name of the column holding your time values. Selecting a value for the Metric column field is optional. If a value is selected, the Metric column field will be used as the series name.

The metric column suggestions will only contain columns with a text data type (text, tinytext, mediumtext, longtext, varchar, char). If you want to use a column with a different data type as metric column, you can enter the column name with a cast: CAST(numericColumn as CHAR). You can also enter arbitrary SQL expressions in the metric column field that evaluate to a text data type such as CONCAT(column1, " ", CAST(numericColumn as CHAR)).

Columns and aggregation functions (SELECT)

In the SELECT row, you can specify what columns and functions you want to use. In the column field, you can write arbitrary expressions instead of a column name such as column1 * column2 / column3.

If you use aggregate functions, you must group your result set. The editor will automatically add a GROUP BY timeif you add an aggregate function.

You can add further value columns by choosing the plus button and selecting Column from the menu. Multiple value columns will be plotted as separate series in the graph panel.

Filtering data (WHERE)

To add a filter, choose the plus icon to the right of the WHERE condition. You can remove filters by choosing on the filter and selecting Remove. A filter for the current selected time range is automatically added to new queries.

Group By

To group by time or any other columns, choose the plus icon at the end of the GROUP BY row. The suggestion dropdown list will only show text columns of your currently selected table but you can manually enter any column. You can remove the group by choosing on the item and then selecting Remove.

If you add any grouping, all selected columns must have an aggregate function applied. The query builder will automatically add aggregate functions to all columns without aggregate functions when you add groupings.

Gap filling

Grafana can fill in missing values when you group by time. The time function accepts two arguments. The first argument is the time window that you want to group by, and the second argument is the value you want Grafana to fill missing items with.

Text editor mode (raw)

You can switch to the raw query editor mode by choosing the hamburger icon and selecting Switch editor mode or by choosing Edit SQL below the query.

Note

If you use the raw query editor, be sure that your query at minimum has ORDER BY time and a filter on the returned time range.

Macros

To simplify syntax and to allow for dynamic parts, such as date range filters, the query can contain macros.

Macro example Description
$__time(dateColumn) Will be replaced by an expression to convert to a UNIX timestamp and rename the column to time_sec; for example, UNIX_TIMESTAMP(dateColumn) as time_sec.
$__timeEpoch(dateColumn) Will be replaced by an expression to convert to a UNIX timestamp and rename the column to time_sec; for example, UNIX_TIMESTAMP(dateColumn) as time_sec.
$__timeFilter(dateColumn) Will be replaced by a time range filter using the specified column name. For example, dateColumn BETWEEN FROM_UNIXTIME(1494410783) AND FROM_UNIXTIME(1494410983).
$__timeFrom() Will be replaced by the start of the currently active time selection. For example, FROM_UNIXTIME(1494410783).
$__timeTo() Will be replaced by the end of the currently active time selection. For example, FROM_UNIXTIME(1494410983).
$__timeGroup(dateColumn,'5m') Will be replaced by an expression usable in GROUP BY clause. For example, cast(cast(UNIX_TIMESTAMP(dateColumn)/(300) as signed)300 as signed),*
$__timeGroup(dateColumn,'5m', 0) Same as the previous row, but with a fill parameter so missing points in that series will be added by grafana and 0 will be used as value.
$__timeGroup(dateColumn,'5m', NULL) Same as above but NULL will be used as value for missing points.
$__timeGroup(dateColumn,'5m', previous) Same as above but the previous value in that series will be used as fill value if no value has been seen yet NULL will be used (only available in Grafana 5.3+).
$__timeGroupAlias(dateColumn,'5m') Will be replaced identical to $__timeGroup but with an added column alias (available only in Grafana 5.3+).
$__unixEpochFilter(dateColumn) Will be replaced by a time range filter using the specified column name with times represented as Unix timestamp. For example, dateColumn > 1494410783 AND dateColumn < 1494497183.
$__unixEpochFrom() Will be replaced by the start of the currently active time selection as Unix timestamp. For example, 1494410783.
$__unixEpochTo() Will be replaced by the end of the currently active time selection as Unix timestamp. For example, 1494497183.
$__unixEpochNanoFilter(dateColumn) Will be replaced by a time range filter using the specified column name with times represented as nanosecond timestamp. For example, dateColumn > 1494410783152415214 AND dateColumn < 1494497183142514872.
$__unixEpochNanoFrom() Will be replaced by the start of the currently active time selection as nanosecond timestamp. For example, 1494410783152415214.
$__unixEpochNanoTo() Will be replaced by the end of the currently active time selection as nanosecond timestamp. For example, 1494497183142514872.
$__unixEpochGroup(dateColumn,"5m", [fillmode]) Same as $__timeGroup but for times stored as Unix timestamp (available only in Grafana 5.3+).
$__unixEpochGroupAlias(dateColumn,"5m", [fillmode])` Same as above but also adds a column alias (available only in Grafana 5.3+).

The query editor has a Generated SQL link that shows up after a query has run, while in panel edit mode. Choose it, and it will expand and show the raw interpolated SQL string that was run.

Table queries

If the Format as query option is set to Table, you can basically do any type of SQL query. The table panel will automatically show the results of whatever columns and rows your query returns.

The following code shows an example query.

SELECT title as 'Title', user.login as 'Created By' , dashboard.created as 'Created On' FROM dashboard INNER JOIN user on user.id = dashboard.created_by WHERE $__timeFilter(dashboard.created)

You can control the name of the Table panel columns by using regular as SQL column selection syntax.

Time series queries

If you set Format as to Time series, for use in a graph panel for example, the query must return a column named time that returns either a SQL datetime or any numeric data type representing Unix epoch. Any column except time and metric is treated as a value column. You can return a column named metric that is used as metric name for the value column. If you return multiple value columns and a column named metric, this column is used as prefix for the series name (available only in Grafana 5.3+).

Result sets of time series queries must be sorted by time.

The following code example shows the metric column.

SELECT $__timeGroup(time_date_time,'5m'), min(value_double), 'min' as metric FROM test_data WHERE $__timeFilter(time_date_time) GROUP BY time ORDER BY time

The following code example shows using the fill parameter in the $__timeGroup macro to convert null values to be zero instead.

SELECT $__timeGroup(createdAt,'5m',0), sum(value_double) as value, measurement FROM test_data WHERE $__timeFilter(createdAt) GROUP BY time, measurement ORDER BY time

The following code example shows multiple columns.

SELECT $__timeGroup(time_date_time,'5m'), min(value_double) as min_value, max(value_double) as max_value FROM test_data WHERE $__timeFilter(time_date_time) GROUP BY time ORDER BY time

There is no support for a dynamic group by time based on time range and panel width.

Templating

Instead of hardcoding things such as server, application and sensor name in your metric queries you can use variables in their place. Variables are shown as dropdown select boxes at the top of the dashboard. You can use these dropdown boxes to change the data being displayed in your dashboard.

For more information about templating and template variables, see Templates.

Query variable

If you add a template variable of the type Query, you can write a MySQL query that can return things such as measurement names, key names, or key values that are shown as a dropdown select box.

For example, you can have a variable that contains all values for the hostname column in a table if you specify a query such as this in the templating variable Query setting.

SELECT hostname FROM my_host

A query can return multiple columns and Grafana will automatically create a list from them. For example, the following query will return a list with values from hostname and hostname2.

SELECT my_host.hostname, my_other_host.hostname2 FROM my_host JOIN my_other_host ON my_host.city = my_other_host.city

To use time range dependent macros such as $__timeFilter(column) in your query, the refresh mode of the template variable must be set to On Time Range Change.

SELECT event_name FROM event_log WHERE $__timeFilter(time_column)

Another option is a query that can create a key/value variable. The query should return two columns that are named __text and __value. The __text column value should be unique (if it is not unique, the first value is used). The options in the dropdown list will have a text and value so that you can have a friendly name as text and an ID as the value.

The following code example shows a query with hostname as the text and id as the value.

SELECT hostname AS __text, id AS __value FROM my_host

You can also create nested variables. For example, if you had another variable named region. Then you could have the hosts variable show only hosts from the current selected region with a query such as this (if region is a multi-value variable then use the IN comparison operator rather than = to match against multiple values).

SELECT hostname FROM my_host WHERE region IN($region)

Using __searchFilter to filter results in Query Variable

Using __searchFilter in the query field will filter the query result based on what the user types in the dropdown select box. When nothing has been entered by the user, the default value for __searchFilter is %.

Note

Important that you surround the __searchFilter expression with quotes as Grafana does not do this for you.

The following example shows how to use __searchFilter as part of the query field to enable searching for hostname while the user types in the dropdown select box.

SELECT hostname FROM my_host WHERE hostname LIKE '$__searchFilter'

Using variables in queries

From Grafana 4.3.0 to 4.6.0, template variables are always quoted automatically so if it is a string value do not wrap them in quotes in where clauses.

From Grafana 4.7.0, template variable values are only quoted when the template variable is a multi-value.

If the variable is a multi-value variable, use the IN comparison operator rather than = to match against multiple values.

There are two syntaxes:

$<varname> Example with a template variable named hostname:

SELECT UNIX_TIMESTAMP(atimestamp) as time, aint as value, avarchar as metric FROM my_table WHERE $__timeFilter(atimestamp) and hostname in($hostname) ORDER BY atimestamp ASC

[[varname]] Example with a template variable named hostname:

SELECT UNIX_TIMESTAMP(atimestamp) as time, aint as value, avarchar as metric FROM my_table WHERE $__timeFilter(atimestamp) and hostname in([[hostname]]) ORDER BY atimestamp ASC

Turning off quoting for multi-value variables

Grafana automatically creates a quoted, comma-separated string for multi-value variables. For example: if server01 and server02 are selected then it will be formatted as: 'server01', 'server02'. To turn off quoting, use the csv formatting option for variables.

${servers:csv}

For more information about variable formatting options, see Advanced variable format options.

Annotations

You can use annotations to overlay rich event information on top of graphs. You add annotation queries via the Dashboard menu / Annotations view. For more information, see .

The following example code shows a query using a time column with epoch values.

SELECT epoch_time as time, metric1 as text, CONCAT(tag1, ',', tag2) as tags FROM public.test_data WHERE $__unixEpochFilter(epoch_time)

The following example code shows a region query using time and timeend columns with epoch values.

Note

Available only in Grafana v6.6+.

SELECT epoch_time as time, epoch_timeend as timeend, metric1 as text, CONCAT(tag1, ',', tag2) as tags FROM public.test_data WHERE $__unixEpochFilter(epoch_time)

The following example code shows a query using a time column of native SQL date/time data type.

SELECT native_date_time as time, metric1 as text, CONCAT(tag1, ',', tag2) as tags FROM public.test_data WHERE $__timeFilter(native_date_time)
Name Description
time The name of the date/time field. Could be a column with a native SQL date/time data type or epoch value.
timeend Optional name of the end date/time field. Could be a column with a native SQL date/time data type or epoch value.
text Event description field.
tags Optional field name to use for event tags as a comma-separated string.

Alerting

Time series queries should work in alerting conditions. Table formatted queries are not yet supported in alert rule conditions.