AWS::MediaConnect::FlowSource - AWS CloudFormation
SyntaxPropertiesReturn values

AWS::MediaConnect::FlowSource

The AWS::MediaConnect::FlowSource resource is usedt to add additional sources to an existing flow. Adding an additional source requires Failover to be enabled. When you enable Failover, the additional source must use the same protocol as the existing source. A source is the external video content that includes configuration information (encryption and source type) and a network address. Each flow has at least one source. A standard source comes from a source other than another AWS Elemental MediaConnect flow, such as an on-premises encoder.

Syntax

To declare this entity in your AWS CloudFormation template, use the following syntax:

JSON

{
  "Type" : "AWS::MediaConnect::FlowSource",
  "Properties" : {
      "Decryption" : Encryption,
      "Description" : String,
      "EntitlementArn" : String,
      "FlowArn" : String,
      "GatewayBridgeSource" : GatewayBridgeSource,
      "IngestPort" : Integer,
      "MaxBitrate" : Integer,
      "MaxLatency" : Integer,
      "MinLatency" : Integer,
      "Name" : String,
      "Protocol" : String,
      "SenderControlPort" : Integer,
      "SenderIpAddress" : String,
      "SourceListenerAddress" : String,
      "SourceListenerPort" : Integer,
      "StreamId" : String,
      "VpcInterfaceName" : String,
      "WhitelistCidr" : String
    }
}

YAML

Type: AWS::MediaConnect::FlowSource
Properties:
  Decryption: 
    Encryption
  Description: String
  EntitlementArn: String
  FlowArn: String
  GatewayBridgeSource: 
    GatewayBridgeSource
  IngestPort: Integer
  MaxBitrate: Integer
  MaxLatency: Integer
  MinLatency: Integer
  Name: String
  Protocol: String
  SenderControlPort: Integer
  SenderIpAddress: String
  SourceListenerAddress: String
  SourceListenerPort: Integer
  StreamId: String
  VpcInterfaceName: String
  WhitelistCidr: String

Properties

Decryption

The type of encryption that is used on the content ingested from the source.

Required: No

Type: Encryption

Update requires: No interruption

Description

A description of the source. This description is not visible outside of the current AWS account.

Required: Yes

Type: String

Update requires: No interruption

EntitlementArn

The ARN of the entitlement that allows you to subscribe to the flow. The entitlement is set by the content originator, and the ARN is generated as part of the originator's flow.

Required: No

Type: String

Update requires: No interruption

FlowArn

The Amazon Resource Name (ARN) of the flow this source is connected to. The flow must have Failover enabled to add an additional source.

Required: No

Type: String

Update requires: No interruption

GatewayBridgeSource

The source configuration for cloud flows receiving a stream from a bridge.

Required: No

Type: GatewayBridgeSource

Update requires: No interruption

IngestPort

The port that the flow listens on for incoming content. If the protocol of the source is Zixi, the port must be set to 2088.

Required: No

Type: Integer

Update requires: No interruption

MaxBitrate

The maximum bitrate for RIST, RTP, and RTP-FEC streams.

Required: No

Type: Integer

Update requires: No interruption

MaxLatency

The maximum latency in milliseconds. This parameter applies only to RIST-based and Zixi-based streams.

Required: No

Type: Integer

Update requires: No interruption

MinLatency

The minimum latency in milliseconds for SRT-based streams. In streams that use the SRT protocol, this value that you set on your MediaConnect source or output represents the minimal potential latency of that connection. The latency of the stream is set to the highest number between the sender’s minimum latency and the receiver’s minimum latency.

Required: No

Type: Integer

Update requires: No interruption

Name

The name of the source.

Required: Yes

Type: String

Update requires: Replacement

Protocol

The protocol that the source uses to deliver the content to MediaConnect. Adding additional sources to an existing flow requires Failover to be enabled. When you enable Failover, the additional source must use the same protocol as the existing source. Only the following protocols support failover: Zixi-push, RTP-FEC, RTP, RIST and SRT protocols.

If you use failover with SRT caller or listener, the FailoverMode property must be set to FAILOVER. The FailoverMode property is found in the FailoverConfig resource of the same flow ARN you used for the source's FlowArn property. SRT caller/listener does not support merge mode failover.

Required: No

Type: String

Allowed values: zixi-push | rtp-fec | rtp | rist | srt-listener | srt-caller

Update requires: No interruption

SenderControlPort

The port that the flow uses to send outbound requests to initiate connection with the sender.

Required: No

Type: Integer

Update requires: No interruption

SenderIpAddress

The IP address that the flow communicates with to initiate connection with the sender.

Required: No

Type: String

Update requires: No interruption

SourceListenerAddress

Source IP or domain name for SRT-caller protocol.

Required: No

Type: String

Update requires: No interruption

SourceListenerPort

Source port for SRT-caller protocol.

Required: No

Type: Integer

Update requires: No interruption

StreamId

The stream ID that you want to use for this transport. This parameter applies only to Zixi and SRT caller-based streams.

Required: No

Type: String

Update requires: No interruption

VpcInterfaceName

The name of the VPC interface that you want to send your output to.

Required: No

Type: String

Update requires: No interruption

WhitelistCidr

The range of IP addresses that are allowed to contribute content to your source. Format the IP addresses as a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.

Required: No

Type: String

Update requires: No interruption

Return values

Ref

When you pass the logical ID of this resource to the intrinsic Ref function, Ref returns the source ARN. For example:

{ "Ref": "arn:aws:mediaconnect:us-east-1:111122223333:source:2-3aBC45dEF67hiJ89-c34de5fG678h:AwardsShowSource" }

For more information about using the Ref function, see Ref.

Fn::GetAtt

The Fn::GetAtt intrinsic function returns a value for a specified attribute of this type. The following are the available attributes and sample return values.

For more information about using the Fn::GetAtt intrinsic function, see Fn::GetAtt.

IngestIp

The IP address that the flow listens on for incoming content.

SourceArn

The ARN of the source.

SourceIngestPort

The port that the flow listens on for incoming content. If the protocol of the source is Zixi, the port must be set to 2088.