CodePipeline ejemplos de uso de herramientas para PowerShell - AWS SDKEjemplos de código
Acciones

Hay más AWS SDK ejemplos disponibles en el GitHub repositorio de AWS Doc SDK Examples.

Las traducciones son generadas a través de traducción automática. En caso de conflicto entre la traducción y la version original de inglés, prevalecerá la version en inglés.

CodePipeline ejemplos de uso de herramientas para PowerShell

Los siguientes ejemplos de código muestran cómo realizar acciones e implementar escenarios comunes mediante el uso del AWS Tools for PowerShell with CodePipeline.

Las acciones son extractos de código de programas más grandes y deben ejecutarse en contexto. Mientras las acciones muestran cómo llamar a las funciones de servicio individuales, es posible ver las acciones en contexto en los escenarios relacionados.

Cada ejemplo incluye un enlace al código fuente completo, donde puede encontrar instrucciones sobre cómo configurar y ejecutar el código en su contexto.

Acciones

En el siguiente ejemplo de código se muestra cómo usar Confirm-CPJob.

Herramientas para PowerShell

Ejemplo 1: En este ejemplo se obtiene el estado del trabajo especificado.

Confirm-CPJob -JobId f570dc12-5ef3-44bc-945a-6e133EXAMPLE -Nonce 3

Salida:

Value
-----
InProgress

En el siguiente ejemplo de código se muestra cómo usar Disable-CPStageTransition.

Herramientas para PowerShell

Ejemplo 1: Este ejemplo desactiva la transición de entrada para la etapa especificada de la canalización especificada.

Disable-CPStageTransition -PipelineName CodePipelineDemo -Reason "Disabling temporarily." -StageName Beta -TransitionType Inbound

  • Para API obtener más información, consulte AWS Tools for PowerShell Cmdlet DisableStageTransitionReference.

En el siguiente ejemplo de código se muestra cómo usar Enable-CPStageTransition.

Herramientas para PowerShell

Ejemplo 1: Este ejemplo habilita la transición entrante para la etapa especificada de la canalización especificada.

Enable-CPStageTransition -PipelineName CodePipelineDemo -StageName Beta -TransitionType Inbound

En el siguiente ejemplo de código se muestra cómo usar Get-CPActionType.

Herramientas para PowerShell

Ejemplo 1: en este ejemplo se obtiene información sobre todas las acciones disponibles para el propietario especificado.

ForEach ($actionType in (Get-CPActionType -ActionOwnerFilter AWS)) {
  Write-Output ("For Category = " + $actionType.Id.Category + ", Owner = " + $actionType.Id.Owner + ", Provider = " + $actionType.Id.Provider + ", Version = " + $actionType.Id.Version + ":")
  Write-Output ("  ActionConfigurationProperties:")
  ForEach ($acp in $actionType.ActionConfigurationProperties) {
    Write-Output ("    For " + $acp.Name + ":")
    Write-Output ("      Description = " + $acp.Description)
    Write-Output ("      Key = " + $acp.Key)
    Write-Output ("      Queryable = " + $acp.Queryable)
    Write-Output ("      Required = " + $acp.Required)
    Write-Output ("      Secret = " + $acp.Secret)
  }
  Write-Output ("  InputArtifactDetails:")
  Write-Output ("    MaximumCount = " + $actionType.InputArtifactDetails.MaximumCount)
  Write-Output ("    MinimumCount = " + $actionType.InputArtifactDetails.MinimumCount)
  Write-Output ("  OutputArtifactDetails:")
  Write-Output ("    MaximumCount = " + $actionType.OutputArtifactDetails.MaximumCount)
  Write-Output ("    MinimumCount = " + $actionType.OutputArtifactDetails.MinimumCount)
  Write-Output ("  Settings:")
  Write-Output ("    EntityUrlTemplate = " + $actionType.Settings.EntityUrlTemplate)
  Write-Output ("    ExecutionUrlTemplate = " + $actionType.Settings.ExecutionUrlTemplate)
}

Salida:

For Category = Deploy, Owner = AWS, Provider = ElasticBeanstalk, Version = 1:
  ActionConfigurationProperties:
    For ApplicationName:
      Description = The AWS Elastic Beanstalk Application name
      Key = True
      Queryable = False
      Required = True
      Secret = False
    For EnvironmentName:
      Description = The AWS Elastic Beanstalk Environment name
      Key = True
      Queryable = False
      Required = True
      Secret = False
  InputArtifactDetails:
    MaximumCount = 1
    MinimumCount = 1
  OutputArtifactDetails:
    MaximumCount = 0
    MinimumCount = 0
  Settings:
    EntityUrlTemplate = https://console.aws.amazon.com/elasticbeanstalk/r/application/{Config:ApplicationName}
    ExecutionUrlTemplate = https://console.aws.amazon.com/elasticbeanstalk/r/application/{Config:ApplicationName} 
For Category = Deploy, Owner = AWS, Provider = CodeDeploy, Version = 1:
  ActionConfigurationProperties:
    For ApplicationName:
      Description = The AWS CodeDeploy Application name
      Key = True
      Queryable = False
      Required = True
      Secret = False
    For DeploymentGroupName:
      Description = The AWS CodeDeploy Deployment Group name
      Key = True
      Queryable = False
      Required = True
      Secret = False
  InputArtifactDetails:
    MaximumCount = 1
    MinimumCount = 1
  OutputArtifactDetails:
    MaximumCount = 0
    MinimumCount = 0
  Settings:
    EntityUrlTemplate = https://console.aws.amazon.com/codedeploy/home?#/applications/{Config:ApplicationName}/deployment-groups/{Config:DeploymentGroupName}
    ExecutionUrlTemplate = https://console.aws.amazon.com/codedeploy/home?#/deployments/{ExternalExecutionId}

En el siguiente ejemplo de código se muestra cómo usar Get-CPActionableJobList.

Herramientas para PowerShell

Ejemplo 1: Este ejemplo obtiene información sobre todos los trabajos procesables para la categoría de acción, el propietario, el proveedor, la versión y los parámetros de consulta especificados.

Get-CPActionableJobList -ActionTypeId_Category Build -ActionTypeId_Owner Custom -ActionTypeId_Provider MyCustomProviderName -ActionTypeId_Version 1 -QueryParam @{"ProjectName" = "MyProjectName"}

Salida:

AccountId       Data                                 Id                                      Nonce
---------       ----                                 --                                      -----
80398EXAMPLE    Amazon.CodePipeline.Model.JobData    0de392f5-712d-4f41-ace3-f57a0EXAMPLE    3

En el siguiente ejemplo de código se muestra cómo usar Get-CPJobDetail.

Herramientas para PowerShell

Ejemplo 1: En este ejemplo se obtiene información general sobre el trabajo especificado.

Get-CPJobDetail -JobId f570dc12-5ef3-44bc-945a-6e133EXAMPLE

Salida:

AccountId       Data                                 Id
---------       ----                                 --
80398EXAMPLE    Amazon.CodePipeline.Model.JobData    f570dc12-5ef3-44bc-945a-6e133EXAMPLE

Ejemplo 2: En este ejemplo se obtiene información detallada sobre el trabajo especificado.

$jobDetails = Get-CPJobDetail -JobId f570dc12-5ef3-44bc-945a-6e133EXAMPLE
Write-Output ("For Job " + $jobDetails.Id + ":")
Write-Output ("  AccountId = " + $jobDetails.AccountId)
$jobData = $jobDetails.Data
Write-Output ("  Configuration:")
ForEach ($key in $jobData.ActionConfiguration.Keys) {
  $value = $jobData.ActionConfiguration.$key
  Write-Output ("    " + $key + " = " + $value)
}
Write-Output ("  ActionTypeId:")
Write-Output ("    Category = " + $jobData.ActionTypeId.Category)
Write-Output ("    Owner = " + $jobData.ActionTypeId.Owner)
Write-Output ("    Provider = " + $jobData.ActionTypeId.Provider)
Write-Output ("    Version = " + $jobData.ActionTypeId.Version)
Write-Output ("  ArtifactCredentials:")
Write-Output ("    AccessKeyId = " + $jobData.ArtifactCredentials.AccessKeyId)
Write-Output ("    SecretAccessKey = " + $jobData.ArtifactCredentials.SecretAccessKey)
Write-Output ("    SessionToken = " + $jobData.ArtifactCredentials.SessionToken)
Write-Output ("  InputArtifacts:")
ForEach ($ia in $jobData.InputArtifacts) {
  Write-Output ("    " + $ia.Name)
}
Write-Output ("  OutputArtifacts:")
ForEach ($oa in $jobData.OutputArtifacts) {
  Write-Output ("    " + $oa.Name)
}
Write-Output ("  PipelineContext:")
$context = $jobData.PipelineContext
Write-Output ("    Name = " + $context.Action.Name)
Write-Output ("    PipelineName = " + $context.PipelineName)
Write-Output ("    Stage = " + $context.Stage.Name)

Salida:

For Job f570dc12-5ef3-44bc-945a-6e133EXAMPLE:
  AccountId = 80398EXAMPLE
  Configuration:
  ActionTypeId:
    Category = Build
    Owner = Custom
    Provider = MyCustomProviderName
    Version = 1
  ArtifactCredentials:
    AccessKeyId = ASIAIEI3...IXI6YREX
    SecretAccessKey = cqAFDhEi...RdQyfa2u
    SessionToken = AQoDYXdz...5u+lsAU=
  InputArtifacts:
    MyApp
  OutputArtifacts:
    MyAppBuild
  PipelineContext:
    Name = Build
    PipelineName = CodePipelineDemo
    Stage = Build

En el siguiente ejemplo de código se muestra cómo usar Get-CPPipeline.

Herramientas para PowerShell

Ejemplo 1: En este ejemplo se obtiene información general sobre la canalización especificada.

Get-CPPipeline -Name CodePipelineDemo -Version 1

Salida:

ArtifactStore : Amazon.CodePipeline.Model.ArtifactStore
Name          : CodePipelineDemo
RoleArn       : arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole
Stages        : {Source, Build, Beta, TestStage}
Version       : 1

Ejemplo 2: En este ejemplo se obtiene información detallada sobre la canalización especificada.

$pipeline = Get-CPPipeline -Name CodePipelineDemo
Write-Output ("Name = " + $pipeline.Name)
Write-Output ("RoleArn = " + $pipeline.RoleArn)
Write-Output ("Version = " + $pipeline.Version)
Write-Output ("ArtifactStore:")
Write-Output ("  Location = " + $pipeline.ArtifactStore.Location)
Write-Output ("  Type = " + $pipeline.ArtifactStore.Type.Value)
Write-Output ("Stages:")
ForEach ($stage in $pipeline.Stages) {
  Write-Output ("  Name = " + $stage.Name)
  Write-Output ("    Actions:")
  ForEach ($action in $stage.Actions) {
    Write-Output ("      Name = " + $action.Name)
	Write-Output ("        Category = " + $action.ActionTypeId.Category)
	Write-Output ("        Owner = " + $action.ActionTypeId.Owner)
	Write-Output ("        Provider = " + $action.ActionTypeId.Provider)
	Write-Output ("        Version = " + $action.ActionTypeId.Version)
	Write-Output ("        Configuration:")
	ForEach ($key in $action.Configuration.Keys) {
	  $value = $action.Configuration.$key
	  Write-Output ("          " + $key + " = " + $value)
	}
	Write-Output ("        InputArtifacts:")
	ForEach ($ia in $action.InputArtifacts) {
	  Write-Output ("          " + $ia.Name)
	}
	ForEach ($oa in $action.OutputArtifacts) {
	  Write-Output ("          " + $oa.Name)
	}
	Write-Output ("        RunOrder = " + $action.RunOrder)
  }
}

Salida:

Name = CodePipelineDemo
RoleArn = arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole
Version = 3
ArtifactStore:
  Location = MyBucketName
  Type = S3
Stages:
  Name = Source
    Actions:
      Name = Source
        Category = Source
        Owner = ThirdParty
        Provider = GitHub
        Version = 1
        Configuration:
          Branch = master
          OAuthToken = ****
          Owner = my-user-name
          Repo = MyRepoName
        InputArtifacts:
          MyApp
        RunOrder = 1
  Name = Build
    Actions:
      Name = Build
        Category = Build
        Owner = Custom
        Provider = MyCustomProviderName
        Version = 1
        Configuration:
          ProjectName = MyProjectName
        InputArtifacts:
          MyApp
          MyAppBuild
        RunOrder = 1
  Name = Beta
    Actions:
      Name = CodePipelineDemoFleet
        Category = Deploy
        Owner = AWS
        Provider = CodeDeploy
        Version = 1
        Configuration:
          ApplicationName = CodePipelineDemoApplication
          DeploymentGroupName = CodePipelineDemoFleet
        InputArtifacts:
          MyAppBuild
        RunOrder = 1
  Name = TestStage
    Actions:
      Name = MyJenkinsTestAction
        Category = Test
        Owner = Custom
        Provider = MyCustomTestProvider
        Version = 1
        Configuration:
          ProjectName = MyJenkinsProjectName
        InputArtifacts:
          MyAppBuild
        RunOrder = 1

En el siguiente ejemplo de código se muestra cómo usar Get-CPPipelineList.

Herramientas para PowerShell

Ejemplo 1: En este ejemplo se obtiene una lista de las canalizaciones disponibles.

Get-CPPipelineList

Salida:

Created                  Name                Updated                  Version
-------                  ----                -------                  -------
8/13/2015 10:17:54 PM    CodePipelineDemo    8/13/2015 10:17:54 PM    3
7/8/2015 2:41:53 AM      MyFirstPipeline     7/22/2015 9:06:37 PM     7

En el siguiente ejemplo de código se muestra cómo usar Get-CPPipelineState.

Herramientas para PowerShell

Ejemplo 1: En este ejemplo se obtiene información general sobre las etapas de la canalización especificada.

Get-CPPipelineState -Name CodePipelineDemo

Salida:

Created         : 8/13/2015 10:17:54 PM
PipelineName    : CodePipelineDemo
PipelineVersion : 1
StageStates     : {Source, Build, Beta, TestStage}
Updated         : 8/13/2015 10:17:54 PM

Ejemplo 2: En este ejemplo se obtiene información detallada sobre el estado de la canalización especificada.

ForEach ($stageState in (Get-CPPipelineState -Name $arg).StageStates) {
  Write-Output ("For " + $stageState.StageName + ":")
  Write-Output ("  InboundTransitionState:")
  Write-Output ("    DisabledReason = " + $stageState.InboundTransitionState.DisabledReason)
  Write-Output ("    Enabled = " + $stageState.InboundTransitionState.Enabled)
  Write-Output ("    LastChangedAt = " + $stageState.InboundTransitionState.LastChangedAt)
  Write-Output ("    LastChangedBy = " + $stageState.InboundTransitionState.LastChangedBy)
  Write-Output ("  ActionStates:")
  ForEach ($actionState in $stageState.ActionStates) {
    Write-Output ("    For " + $actionState.ActionName + ":")
	Write-Output ("      CurrentRevision:")
    Write-Output ("        Created = " + $actionState.CurrentRevision.Created)
	Write-Output ("        RevisionChangeId = " + $actionState.CurrentRevision.RevisionChangeId)
	Write-Output ("        RevisionId = " + $actionState.CurrentRevision.RevisionId)
	Write-Output ("      EntityUrl = " + $actionState.EntityUrl)
	Write-Output ("      LatestExecution:")
    Write-Output ("        ErrorDetails:")
    Write-Output ("          Code = " + $actionState.LatestExecution.ErrorDetails.Code)
	Write-Output ("          Message = " + $actionState.LatestExecution.ErrorDetails.Message)
	Write-Output ("        ExternalExecutionId = " + $actionState.LatestExecution.ExternalExecutionId)
	Write-Output ("        ExternalExecutionUrl = " + $actionState.LatestExecution.ExternalExecutionUrl)
	Write-Output ("        LastStatusChange	= " + $actionState.LatestExecution.LastStatusChange)
	Write-Output ("        PercentComplete = " + $actionState.LatestExecution.PercentComplete)
	Write-Output ("        Status = " + $actionState.LatestExecution.Status)
	Write-Output ("        Summary = " + $actionState.LatestExecution.Summary)
	Write-Output ("      RevisionUrl = " + $actionState.RevisionUrl)
  }
}

Salida:

For Source:
  InboundTransitionState:
    DisabledReason =
    Enabled =
    LastChangedAt =
    LastChangedBy =
  ActionStates:
    For Source:
      CurrentRevision:
        Created =
        RevisionChangeId =
        RevisionId =
      EntityUrl = https://github.com/my-user-name/MyRepoName/tree/master
      LatestExecution:
        ErrorDetails:
          Code =
          Message =
        ExternalExecutionId =
        ExternalExecutionUrl =
        LastStatusChange = 07/20/2015 23:28:45
        PercentComplete = 0
        Status = Succeeded
        Summary =
      RevisionUrl =
For Build:
  InboundTransitionState:
    DisabledReason =
    Enabled = True
    LastChangedAt = 01/01/0001 00:00:00
    LastChangedBy =
  ActionStates:
    For Build:
      CurrentRevision:
        Created =
        RevisionChangeId =
        RevisionId =
      EntityUrl = http://54.174.131.1EX/job/MyJenkinsDemo
      LatestExecution:
        ErrorDetails:
          Code = TimeoutError
          Message = The action failed because a job worker exceeded its time limit. If this is a custom action, make sure that the job worker is configured correctly.
        ExternalExecutionId =
        ExternalExecutionUrl =
        LastStatusChange = 07/21/2015 00:29:29
        PercentComplete = 0
        Status = Failed
        Summary =
      RevisionUrl =
For Beta:
  InboundTransitionState:
    DisabledReason =
    Enabled = True
    LastChangedAt = 01/01/0001 00:00:00
    LastChangedBy =
  ActionStates:
    For CodePipelineDemoFleet:
      CurrentRevision:
        Created =
        RevisionChangeId =
        RevisionId =
      EntityUrl = https://console.aws.amazon.com/codedeploy/home?#/applications/CodePipelineDemoApplication/deployment-groups/CodePipelineDemoFleet
      LatestExecution:
        ErrorDetails:
          Code =
          Message =
        ExternalExecutionId = d-D5LTCZXEX
        ExternalExecutionUrl = https://console.aws.amazon.com/codedeploy/home?#/deployments/d-D5LTCZXEX
        LastStatusChange = 07/08/2015 22:07:42
        PercentComplete = 0
        Status = Succeeded
        Summary = Deployment Succeeded
      RevisionUrl =
For TestStage:
  InboundTransitionState:
    DisabledReason =
    Enabled = True
    LastChangedAt = 01/01/0001 00:00:00
    LastChangedBy =
  ActionStates:
    For MyJenkinsTestAction25:
      CurrentRevision:
        Created =
        RevisionChangeId =
        RevisionId =
      EntityUrl = http://54.174.131.1EX/job/MyJenkinsDemo
      LatestExecution:
        ErrorDetails:
          Code =
          Message =
        ExternalExecutionId = 5
        ExternalExecutionUrl = http://54.174.131.1EX/job/MyJenkinsDemo/5
        LastStatusChange = 07/08/2015 22:09:03
        PercentComplete = 0
        Status = Succeeded
        Summary = Finished
      RevisionUrl =

En el siguiente ejemplo de código se muestra cómo usar New-CPCustomActionType.

Herramientas para PowerShell

Ejemplo 1: En este ejemplo se crea una nueva acción personalizada con las propiedades especificadas.

New-CPCustomActionType -Category Build -ConfigurationProperty @{"Description" = "The name of the build project must be provided when this action is added to the pipeline."; "Key" = $True; "Name" = "ProjectName"; "Queryable" = $False; "Required" = $True; "Secret" = $False; "Type" = "String"} -Settings_EntityUrlTemplate "https://my-build-instance/job/{Config:ProjectName}/" -Settings_ExecutionUrlTemplate "https://my-build-instance/job/mybuildjob/lastSuccessfulBuild{ExternalExecutionId}/" -InputArtifactDetails_MaximumCount 1 -OutputArtifactDetails_MaximumCount 1 -InputArtifactDetails_MinimumCount 0 -OutputArtifactDetails_MinimumCount 0 -Provider "MyBuildProviderName" -Version 1

Salida:

ActionConfigurationProperties : {ProjectName}
Id                            : Amazon.CodePipeline.Model.ActionTypeId
InputArtifactDetails          : Amazon.CodePipeline.Model.ArtifactDetails
OutputArtifactDetails         : Amazon.CodePipeline.Model.ArtifactDetails
Settings                      : Amazon.CodePipeline.Model.ActionTypeSettings

En el siguiente ejemplo de código se muestra cómo usar New-CPPipeline.

Herramientas para PowerShell

Ejemplo 1: Este ejemplo crea una nueva canalización con la configuración especificada.

$pipeline = New-Object Amazon.CodePipeline.Model.PipelineDeclaration

$sourceStageAction = New-Object Amazon.CodePipeline.Model.ActionDeclaration
$deployStageAction = New-Object Amazon.CodePipeline.Model.ActionDeclaration

$sourceStageActionOutputArtifact = New-Object Amazon.CodePipeline.Model.OutputArtifact
$sourceStageActionOutputArtifact.Name = "MyApp"

$sourceStageAction.ActionTypeId = @{"Category" = "Source"; "Owner" = "AWS"; "Provider" = "S3"; "Version" = 1}
$sourceStageAction.Configuration.Add("S3Bucket", "amzn-s3-demo-bucket")
$sourceStageAction.Configuration.Add("S3ObjectKey", "my-object-key-name.zip")
$sourceStageAction.OutputArtifacts.Add($sourceStageActionOutputArtifact)
$sourceStageAction.Name = "Source"

$deployStageActionInputArtifact = New-Object Amazon.CodePipeline.Model.InputArtifact
$deployStageActionInputArtifact.Name = "MyApp"

$deployStageAction.ActionTypeId = @{"Category" = "Deploy"; "Owner" = "AWS"; "Provider" = "CodeDeploy"; "Version" = 1}
$deployStageAction.Configuration.Add("ApplicationName", "CodePipelineDemoApplication")
$deployStageAction.Configuration.Add("DeploymentGroupName", "CodePipelineDemoFleet")
$deployStageAction.InputArtifacts.Add($deployStageActionInputArtifact)
$deployStageAction.Name = "CodePipelineDemoFleet"

$sourceStage = New-Object Amazon.CodePipeline.Model.StageDeclaration
$deployStage = New-Object Amazon.CodePipeline.Model.StageDeclaration

$sourceStage.Name = "Source"
$deployStage.Name = "Beta"

$sourceStage.Actions.Add($sourceStageAction)
$deployStage.Actions.Add($deployStageAction)

$pipeline.ArtifactStore = @{"Location" = "amzn-s3-demo-bucket"; "Type" = "S3"}
$pipeline.Name = "CodePipelineDemo"
$pipeline.RoleArn = "arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole"
$pipeline.Stages.Add($sourceStage)
$pipeline.Stages.Add($deployStage)
$pipeline.Version = 1

New-CPPipeline -Pipeline $pipeline

Salida:

ArtifactStore : Amazon.CodePipeline.Model.ArtifactStore
Name          : CodePipelineDemo
RoleArn       : arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole
Stages        : {Source, Beta}
Version       : 1

En el siguiente ejemplo de código se muestra cómo usar Remove-CPCustomActionType.

Herramientas para PowerShell

Ejemplo 1: en este ejemplo se elimina la acción personalizada especificada. El comando solicitará una confirmación antes de continuar. Añada el parámetro -Force para eliminar la acción personalizada sin que aparezca un mensaje.

Remove-CPCustomActionType -Category Build -Provider MyBuildProviderName -Version 1

En el siguiente ejemplo de código se muestra cómo usar Remove-CPPipeline.

Herramientas para PowerShell

Ejemplo 1: en este ejemplo se elimina la canalización especificada. El comando solicitará una confirmación antes de continuar. Agregue el parámetro -Force para eliminar la canalización sin una solicitud.

Remove-CPPipeline -Name CodePipelineDemo

En el siguiente ejemplo de código se muestra cómo usar Start-CPPipelineExecution.

Herramientas para PowerShell

Ejemplo 1: En este ejemplo se inicia la ejecución de la canalización especificada.

Start-CPPipelineExecution -Name CodePipelineDemo

En el siguiente ejemplo de código se muestra cómo usar Update-CPPipeline.

Herramientas para PowerShell

Ejemplo 1: en este ejemplo se actualiza la canalización existente especificada con la configuración especificada.

$pipeline = New-Object Amazon.CodePipeline.Model.PipelineDeclaration

$sourceStageAction = New-Object Amazon.CodePipeline.Model.ActionDeclaration
$deployStageAction = New-Object Amazon.CodePipeline.Model.ActionDeclaration

$sourceStageActionOutputArtifact = New-Object Amazon.CodePipeline.Model.OutputArtifact
$sourceStageActionOutputArtifact.Name = "MyApp"

$sourceStageAction.ActionTypeId = @{"Category" = "Source"; "Owner" = "AWS"; "Provider" = "S3"; "Version" = 1}
$sourceStageAction.Configuration.Add("S3Bucket", "amzn-s3-demo-bucket")
$sourceStageAction.Configuration.Add("S3ObjectKey", "my-object-key-name.zip")
$sourceStageAction.OutputArtifacts.Add($sourceStageActionOutputArtifact)
$sourceStageAction.Name = "Source"

$deployStageActionInputArtifact = New-Object Amazon.CodePipeline.Model.InputArtifact
$deployStageActionInputArtifact.Name = "MyApp"

$deployStageAction.ActionTypeId = @{"Category" = "Deploy"; "Owner" = "AWS"; "Provider" = "CodeDeploy"; "Version" = 1}
$deployStageAction.Configuration.Add("ApplicationName", "CodePipelineDemoApplication")
$deployStageAction.Configuration.Add("DeploymentGroupName", "CodePipelineDemoFleet")
$deployStageAction.InputArtifacts.Add($deployStageActionInputArtifact)
$deployStageAction.Name = "CodePipelineDemoFleet"

$sourceStage = New-Object Amazon.CodePipeline.Model.StageDeclaration
$deployStage = New-Object Amazon.CodePipeline.Model.StageDeclaration

$sourceStage.Name = "MyInputFiles"
$deployStage.Name = "MyTestDeployment"

$sourceStage.Actions.Add($sourceStageAction)
$deployStage.Actions.Add($deployStageAction)

$pipeline.ArtifactStore = @{"Location" = "amzn-s3-demo-bucket"; "Type" = "S3"}
$pipeline.Name = "CodePipelineDemo"
$pipeline.RoleArn = "arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole"
$pipeline.Stages.Add($sourceStage)
$pipeline.Stages.Add($deployStage)
$pipeline.Version = 1

Update-CPPipeline -Pipeline $pipeline

Salida:

ArtifactStore : Amazon.CodePipeline.Model.ArtifactStore
Name          : CodePipelineDemo
RoleArn       : arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole
Stages        : {InputFiles, TestDeployment}
Version       : 2