NetworkInterface
Represents a node and its specifications in an in-vehicle communication network. All signal decoders must be associated with a network node.
To return this information about all the network interfaces specified in a decoder manifest, use the ListDecoderManifestNetworkInterfaces API operation.
Contents
- interfaceId
-
The ID of the network interface.
Type: String
Length Constraints: Minimum length of 1. Maximum length of 50.
Required: Yes
- type
-
The network protocol for the vehicle. For example,
CAN_SIGNALspecifies a protocol that defines how data is communicated between electronic control units (ECUs).OBD_SIGNALspecifies a protocol that defines how self-diagnostic data is communicated between ECUs.Type: String
Valid Values:
CAN_INTERFACE | OBD_INTERFACE | VEHICLE_MIDDLEWARE | CUSTOM_DECODING_INTERFACERequired: Yes
- canInterface
-
Information about a network interface specified by the Controller Area Network (CAN) protocol.
Type: CanInterface object
Required: No
- customDecodingInterface
-
Information about a custom network interface.
Type: CustomDecodingInterface object
Required: No
- obdInterface
-
Information about a network interface specified by the on-board diagnostic (OBD) II protocol.
Type: ObdInterface object
Required: No
- vehicleMiddleware
-
The vehicle middleware defined as a type of network interface. Examples of vehicle middleware include
ROS2andSOME/IP.Type: VehicleMiddleware object
Required: No
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
