Add a device to an AWS Cloud WAN global network - AWS Network Manager

Add a device to an AWS Cloud WAN global network

Add a device to your Cloud WAN global network. Devices can then be associated to sites using links.

To add a device

  1. Access the Network Manager console at https://console.aws.amazon.com/networkmanager/home/.

  2. Under Connectivity, choose Global Networks.

  3. On the Global networks page, choose the global network ID.

  4. In the navigation pane, choose Devices.

  5. Choose Create Device.

  6. For Name and Description, enter a name and description for the device.

  7. For Model, enter the device model number.

  8. For Serial number, enter the serial number for the device.

  9. For Type, enter the device type.

  10. For Vendor, enter the name of the vendor, for example, Cisco.

  11. For Location type, specify whether the device is located in a remote location (On-premises, Data center/ Other Cloud Provider) or in the AWS Cloud.

    If you choose AWS Cloud, specify the location of the device within AWS:

    • For the Zone, specify the name of an Availability Zone,Local Zone, Wavelength Zone, or an Outpost.

    • For the Subnet, specify the Amazon Resource Name (ARN) of the subnet (for example, arn:aws:ec2:useast-1:111111111111:subnet/subnet-abcd1234).

  12. For Address, enter the physical location of the site (for example New York, NY 10004).

  13. For Latitude, enter the latitude coordinates for the site (for example, 40.7128).

  14. For Longitude, enter the longitude coordinates for the site (for example, -74.0060).