Lag
Information about a link aggregation group (LAG).
Contents
- allowsHostedConnections
-
Indicates whether the LAG can host other connections.
Type: Boolean
Required: No
- awsDevice
-
This member has been deprecated.
The AWS Direct Connect endpoint that hosts the LAG.
Type: String
Required: No
- awsDeviceV2
-
The AWS Direct Connect endpoint that hosts the LAG.
Type: String
Required: No
- awsLogicalDeviceId
-
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
Type: String
Required: No
- connections
-
The connections bundled by the LAG.
Type: Array of Connection objects
Required: No
- connectionsBandwidth
-
The individual bandwidth of the physical connections bundled by the LAG. The possible values are 1Gbps, 10Gbps, 100Gbps, or 400 Gbps..
Type: String
Required: No
- encryptionMode
-
The LAG MAC Security (MACsec) encryption mode.
The valid values are
no_encrypt,should_encrypt, andmust_encrypt.Type: String
Required: No
- hasLogicalRedundancy
-
Indicates whether the LAG supports a secondary BGP peer in the same address family (IPv4/IPv6).
Type: String
Valid Values:
unknown | yes | noRequired: No
- jumboFrameCapable
-
Indicates whether jumbo frames are supported.
Type: Boolean
Required: No
- lagId
-
The ID of the LAG.
Type: String
Required: No
- lagName
-
The name of the LAG.
Type: String
Required: No
- lagState
-
The state of the LAG. The following are the possible values:
-
requested: The initial state of a LAG. The LAG stays in the requested state until the Letter of Authorization (LOA) is available. -
pending: The LAG has been approved and is being initialized. -
available: The network link is established and the LAG is ready for use. -
down: The network link is down. -
deleting: The LAG is being deleted. -
deleted: The LAG is deleted. -
unknown: The state of the LAG is not available.
Type: String
Valid Values:
requested | pending | available | down | deleting | deleted | unknownRequired: No
-
- location
-
The location of the LAG.
Type: String
Required: No
- macSecCapable
-
Indicates whether the LAG supports MAC Security (MACsec).
Type: Boolean
Required: No
- macSecKeys
-
The MAC Security (MACsec) security keys associated with the LAG.
Type: Array of MacSecKey objects
Required: No
- minimumLinks
-
The minimum number of physical dedicated connections that must be operational for the LAG itself to be operational.
Type: Integer
Required: No
- numberOfConnections
-
The number of physical dedicated connections initially provisioned and bundled by the LAG. You can have a maximum of four connections when the port speed is 1 Gbps or 10 Gbps, or two when the port speed is 100 Gbps or 400 Gbps.
Type: Integer
Required: No
- ownerAccount
-
The ID of the AWS account that owns the LAG.
Type: String
Required: No
- providerName
-
The name of the service provider associated with the LAG.
Type: String
Required: No
- region
-
The AWS Region where the connection is located.
Type: String
Required: No
-
The tags associated with the LAG.
Type: Array of Tag objects
Array Members: Minimum number of 1 item.
Required: No
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
