SDK for PHP 3.x

You don't have permissions to perform the requested operation. The user or role that is making the request must have at least one IAM permissions policy attached that grants the required permissions. For more information, see Access Management in the IAM User Guide.

HandshakeConstraintViolationException:

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

The requested operation would violate the constraint identified in the reason code.

Some of the reasons in the following list might not be applicable to this specific API or operation:

ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. Note that deleted and closed accounts still count toward your limit.

If you get this exception immediately after creating the organization, wait one hour and try again. If after an hour it continues to fail with this error, contact Amazon Web Services Support.
ALREADY_IN_AN_ORGANIZATION: The handshake request is invalid because the invited account is already a member of an organization.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVITE_DISABLED_DURING_ENABLE_ALL_FEATURES: You can't issue new invitations to join an organization while it's in the process of enabling all features. You can resume inviting accounts after you finalize the process when all accounts have agreed to the change.
ORGANIZATION_ALREADY_HAS_ALL_FEATURES: The handshake request is invalid because the organization has already enabled all features.
ORGANIZATION_IS_ALREADY_PENDING_ALL_FEATURES_MIGRATION: The handshake request is invalid because the organization has already started the process to enable all features.
ORGANIZATION_FROM_DIFFERENT_SELLER_OF_RECORD: The request failed because the account is from a different marketplace than the accounts in the organization. For example, accounts with India addresses must be associated with the AISPL marketplace. All accounts in an organization must be from the same marketplace.
ORGANIZATION_MEMBERSHIP_CHANGE_RATE_LIMIT_EXCEEDED: You attempted to change the membership of an account too quickly after its previous change.
PAYMENT_INSTRUMENT_REQUIRED: You can't complete the operation with an account that doesn't have a payment instrument, such as a credit card, associated with it.

InvalidHandshakeTransitionException:

We can't find a handshake with the HandshakeId that you specified.

You can't perform the operation on the handshake in its current state. For example, you can't cancel a handshake that was already accepted or accept a handshake that was already declined.

HandshakeAlreadyInStateException:

The specified handshake is already in the requested state. For example, you can't accept a handshake that was already accepted.

The requested operation failed because you provided invalid values for one or more of the request parameters. This exception includes a reason that contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

The target of the operation is currently being modified by a different request. Try again later.

Organizations can't complete your request because of an internal service error. Try again later.

AccessDeniedForDependencyException:

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

The operation that you attempted requires you to have the iam:CreateServiceLinkedRole for organizations.amazonaws.com permission so that Organizations can create the required service-linked role. You don't have that permission.

Examples

Example 1: To accept a handshake from another account

Bill is the owner of an organization, and he invites Juan's account (222222222222) to join his organization. The following example shows Juan's account accepting the handshake and thus agreeing to the invitation.

$result = $client->acceptHandshake([
    'HandshakeId' => 'h-examplehandshakeid111',
]);

Result syntax:

[
    'Handshake' => [
        'Action' => 'INVITE',
        'Arn' => 'arn:aws:organizations::111111111111:handshake/o-exampleorgid/invite/h-examplehandshakeid111',
        'ExpirationTimestamp' => ,
        'Id' => 'h-examplehandshakeid111',
        'Parties' => [
            [
                'Id' => 'o-exampleorgid',
                'Type' => 'ORGANIZATION',
            ],
            [
                'Id' => 'juan@example.com',
                'Type' => 'EMAIL',
            ],
        ],
        'RequestedTimestamp' => ,
        'Resources' => [
            [
                'Resources' => [
                    [
                        'Type' => 'MASTER_EMAIL',
                        'Value' => 'bill@amazon.com',
                    ],
                    [
                        'Type' => 'MASTER_NAME',
                        'Value' => 'Org Master Account',
                    ],
                    [
                        'Type' => 'ORGANIZATION_FEATURE_SET',
                        'Value' => 'ALL',
                    ],
                ],
                'Type' => 'ORGANIZATION',
                'Value' => 'o-exampleorgid',
            ],
            [
                'Type' => 'ACCOUNT',
                'Value' => '222222222222',
            ],
        ],
        'State' => 'ACCEPTED',
    ],
]

AttachPolicy

$result = $client->attachPolicy([/* ... */]);
$promise = $client->attachPolicyAsync([/* ... */]);

Attaches a policy to a root, an organizational unit (OU), or an individual account. How the policy affects accounts depends on the type of policy. Refer to the Organizations User Guide for information about each policy type:

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->attachPolicy([
    'PolicyId' => '<string>', // REQUIRED
    'TargetId' => '<string>', // REQUIRED
]);

Parameter Details

Members

PolicyId

: Required: Yes
: Type: string

The unique identifier (ID) of the policy that you want to attach to the target. You can get the ID for the policy by calling the ListPolicies operation.

The regex pattern for a policy ID string requires "p-" followed by from 8 to 128 lowercase or uppercase letters, digits, or the underscore character (_).

TargetId

: Required: Yes
: Type: string

The unique identifier (ID) of the root, OU, or account that you want to attach the policy to. You can get the ID by calling the ListRoots, ListOrganizationalUnitsForParent, or ListAccounts operations.

The regex pattern for a target ID string requires one of the following:

Root - A string that begins with "r-" followed by from 4 to 32 lowercase letters or digits.
Account - A string that consists of exactly 12 digits.
Organizational unit (OU) - A string that begins with "ou-" followed by from 4 to 32 lowercase letters or digits (the ID of the root that the OU is in). This string is followed by a second "-" dash and from 8 to 32 additional lowercase letters or digits.

Result Syntax

[]

Result Details

The results for this operation are always empty.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

The target of the operation is currently being modified by a different request. Try again later.

DuplicatePolicyAttachmentException:

Performing this operation violates a minimum or maximum value limit. For example, attempting to remove the last service control policy (SCP) from an OU or root, inviting or creating too many accounts to the organization, or attaching too many policies to an account, OU, or root. This exception includes a reason that contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

The selected policy is already attached to the specified target.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

PolicyTypeNotEnabledException:

We can't find a policy with the PolicyId that you specified.

The specified policy type isn't currently enabled in this root. You can't attach policies of the specified type to entities in a root until you enable that type in the root. For more information, see Enabling all features in your organization in the Organizations User Guide.

Organizations can't complete your request because of an internal service error. Try again later.

We can't find a root, OU, account, or policy with the TargetId that you specified.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

This action isn't available in the current Amazon Web Services Region.

Changes to the effective policy are in progress, and its contents can't be returned. Try the operation again later.

Examples

Example 1: To attach a policy to an OU

The following example shows how to attach a service control policy (SCP) to an OU:

$result = $client->attachPolicy([
    'PolicyId' => 'p-examplepolicyid111',
    'TargetId' => 'ou-examplerootid111-exampleouid111',
]);

Example 2: To attach a policy to an account

The following example shows how to attach a service control policy (SCP) to an account:

$result = $client->attachPolicy([
    'PolicyId' => 'p-examplepolicyid111',
    'TargetId' => '333333333333',
]);

CancelHandshake

$result = $client->cancelHandshake([/* ... */]);
$promise = $client->cancelHandshakeAsync([/* ... */]);

Cancels a handshake. Canceling a handshake sets the handshake state to CANCELED.

This operation can be called only from the account that originated the handshake. The recipient of the handshake can't cancel it, but can use DeclineHandshake instead. After a handshake is canceled, the recipient can no longer respond to that handshake.

After you cancel a handshake, it continues to appear in the results of relevant APIs for only 30 days. After that, it's deleted.

Parameter Syntax

$result = $client->cancelHandshake([
    'HandshakeId' => '<string>', // REQUIRED
]);

Parameter Details

Members

HandshakeId

: Required: Yes
: Type: string

The unique identifier (ID) of the handshake that you want to cancel. You can get the ID from the ListHandshakesForOrganization operation.

The regex pattern for handshake ID string requires "h-" followed by from 8 to 32 lowercase letters or digits.

Result Syntax

[
    'Handshake' => [
        'Action' => 'INVITE|ENABLE_ALL_FEATURES|APPROVE_ALL_FEATURES|ADD_ORGANIZATIONS_SERVICE_LINKED_ROLE',
        'Arn' => '<string>',
        'ExpirationTimestamp' => <DateTime>,
        'Id' => '<string>',
        'Parties' => [
            [
                'Id' => '<string>',
                'Type' => 'ACCOUNT|ORGANIZATION|EMAIL',
            ],
            // ...
        ],
        'RequestedTimestamp' => <DateTime>,
        'Resources' => [
            [
                'Resources' => [...], // RECURSIVE
                'Type' => 'ACCOUNT|ORGANIZATION|ORGANIZATION_FEATURE_SET|EMAIL|MASTER_EMAIL|MASTER_NAME|NOTES|PARENT_HANDSHAKE',
                'Value' => '<string>',
            ],
            // ...
        ],
        'State' => 'REQUESTED|OPEN|CANCELED|ACCEPTED|DECLINED|EXPIRED',
    ],
]

Result Details

Members

Handshake

: Type: Handshake structure

A structure that contains details about the handshake that you canceled.

Errors

The target of the operation is currently being modified by a different request. Try again later.

InvalidHandshakeTransitionException:

We can't find a handshake with the HandshakeId that you specified.

You can't perform the operation on the handshake in its current state. For example, you can't cancel a handshake that was already accepted or accept a handshake that was already declined.

HandshakeAlreadyInStateException:

The specified handshake is already in the requested state. For example, you can't accept a handshake that was already accepted.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Examples

Example 1: To cancel a handshake sent to a member account

Bill previously sent an invitation to Susan's account to join his organization. He changes his mind and decides to cancel the invitation before Susan accepts it. The following example shows Bill's cancellation:

$result = $client->cancelHandshake([
    'HandshakeId' => 'h-examplehandshakeid111',
]);

Result syntax:

[
    'Handshake' => [
        'Action' => 'INVITE',
        'Arn' => 'arn:aws:organizations::111111111111:handshake/o-exampleorgid/invite/h-examplehandshakeid111',
        'ExpirationTimestamp' => ,
        'Id' => 'h-examplehandshakeid111',
        'Parties' => [
            [
                'Id' => 'o-exampleorgid',
                'Type' => 'ORGANIZATION',
            ],
            [
                'Id' => 'susan@example.com',
                'Type' => 'EMAIL',
            ],
        ],
        'RequestedTimestamp' => ,
        'Resources' => [
            [
                'Resources' => [
                    [
                        'Type' => 'MASTER_EMAIL',
                        'Value' => 'bill@example.com',
                    ],
                    [
                        'Type' => 'MASTER_NAME',
                        'Value' => 'Master Account',
                    ],
                    [
                        'Type' => 'ORGANIZATION_FEATURE_SET',
                        'Value' => 'CONSOLIDATED_BILLING',
                    ],
                ],
                'Type' => 'ORGANIZATION',
                'Value' => 'o-exampleorgid',
            ],
            [
                'Type' => 'ACCOUNT',
                'Value' => '222222222222',
            ],
            [
                'Type' => 'NOTES',
                'Value' => 'This is a request for Susan's account to join Bob's organization.',
            ],
        ],
        'State' => 'CANCELED',
    ],
]

CloseAccount

$result = $client->closeAccount([/* ... */]);
$promise = $client->closeAccountAsync([/* ... */]);

Closes an Amazon Web Services member account within an organization. You can close an account when all features are enabled . You can't close the management account with this API. This is an asynchronous request that Amazon Web Services performs in the background. Because CloseAccount operates asynchronously, it can return a successful completion message even though account closure might still be in progress. You need to wait a few minutes before the account is fully closed. To check the status of the request, do one of the following:

Use the AccountId that you sent in the CloseAccount request to provide as a parameter to the DescribeAccount operation.

While the close account request is in progress, Account status will indicate PENDING_CLOSURE. When the close account request completes, the status will change to SUSPENDED.
Check the CloudTrail log for the CloseAccountResult event that gets published after the account closes successfully. For information on using CloudTrail with Organizations, see Logging and monitoring in Organizations in the Organizations User Guide.

You can close only 10% of member accounts, between 10 and 1000, within a rolling 30 day period. This quota is not bound by a calendar month, but starts when you close an account. After you reach this limit, you can't close additional accounts. For more information, see Closing a member account in your organization and Quotas for Organizations in the Organizations User Guide.
To reinstate a closed account, contact Amazon Web Services Support within the 90-day grace period while the account is in SUSPENDED status.
If the Amazon Web Services account you attempt to close is linked to an Amazon Web Services GovCloud (US) account, the CloseAccount request will close both accounts. To learn important pre-closure details, see Closing an Amazon Web Services GovCloud (US) account in the Amazon Web Services GovCloud User Guide.

Parameter Syntax

$result = $client->closeAccount([
    'AccountId' => '<string>', // REQUIRED
]);

Parameter Details

Members

AccountId

: Required: Yes
: Type: string

Retrieves the Amazon Web Services account Id for the current CloseAccount API request.

Result Syntax

[]

Result Details

The results for this operation are always empty.

Errors

AccountAlreadyClosedException:

You attempted to close an account that is already closed.

We can't find an Amazon Web Services account with the AccountId that you specified, or the account whose credentials you used to make this request isn't a member of an organization.

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

The target of the operation is currently being modified by a different request. Try again later.

ConflictException:

The request failed because it conflicts with the current state of the specified resource.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

This action isn't available in the current Amazon Web Services Region.

CreateAccount

$result = $client->createAccount([/* ... */]);
$promise = $client->createAccountAsync([/* ... */]);

Creates an Amazon Web Services account that is automatically a member of the organization whose credentials made the request. This is an asynchronous request that Amazon Web Services performs in the background. Because CreateAccount operates asynchronously, it can return a successful completion message even though account initialization might still be in progress. You might need to wait a few minutes before you can successfully access the account. To check the status of the request, do one of the following:

Use the Id value of the CreateAccountStatus response element from this operation to provide as a parameter to the DescribeCreateAccountStatus operation.
Check the CloudTrail log for the CreateAccountResult event. For information on using CloudTrail with Organizations, see Logging and monitoring in Organizations in the Organizations User Guide.

The user who calls the API to create an account must have the organizations:CreateAccount permission. If you enabled all features in the organization, Organizations creates the required service-linked role named AWSServiceRoleForOrganizations. For more information, see Organizations and service-linked roles in the Organizations User Guide.

If the request includes tags, then the requester must have the organizations:TagResource permission.

Organizations preconfigures the new member account with a role (named OrganizationAccountAccessRole by default) that grants users in the management account administrator permissions in the new member account. Principals in the management account can assume the role. Organizations clones the company name and address information for the new account from the organization's management account.

This operation can be called only from the organization's management account.

For more information about creating accounts, see Creating a member account in your organization in the Organizations User Guide.

When you create an account in an organization using the Organizations console, API, or CLI commands, the information required for the account to operate as a standalone account, such as a payment method is not automatically collected. If you must remove an account from your organization later, you can do so only after you provide the missing information. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
If you get an exception that indicates that you exceeded your account limits for the organization, contact Amazon Web Services Support.
If you get an exception that indicates that the operation failed because your organization is still initializing, wait one hour and then try again. If the error persists, contact Amazon Web Services Support.
It isn't recommended to use CreateAccount to create multiple temporary accounts, and using the CreateAccount API to close accounts is subject to a 30-day usage quota. For information on the requirements and process for closing an account, see Closing a member account in your organization in the Organizations User Guide.

When you create a member account with this operation, you can choose whether to create the account with the IAM User and Role Access to Billing Information switch enabled. If you enable it, IAM users and roles that have appropriate permissions can view billing information for the account. If you disable it, only the account root user can access billing information. For information about how to disable this switch for an account, see Granting access to your billing information and tools.

Parameter Syntax

$result = $client->createAccount([
    'AccountName' => '<string>', // REQUIRED
    'Email' => '<string>', // REQUIRED
    'IamUserAccessToBilling' => 'ALLOW|DENY',
    'RoleName' => '<string>',
    'Tags' => [
        [
            'Key' => '<string>', // REQUIRED
            'Value' => '<string>', // REQUIRED
        ],
        // ...
    ],
]);

Parameter Details

Members

AccountName

: Required: Yes
: Type: string

The friendly name of the member account.

Email

: Required: Yes
: Type: string

The email address of the owner to assign to the new member account. This email address must not already be associated with another Amazon Web Services account. You must use a valid email address to complete account creation.

The rules for a valid email address:

The address must be a minimum of 6 and a maximum of 64 characters long.
All characters must be 7-bit ASCII characters.
There must be one and only one @ symbol, which separates the local name from the domain name.
The local name can't contain any of the following characters:

whitespace, " ' ( ) < > [ ] : ; , \ | % &
The local name can't begin with a dot (.)
The domain name can consist of only the characters [a-z],[A-Z],[0-9], hyphen (-), or dot (.)
The domain name can't begin or end with a hyphen (-) or dot (.)
The domain name must contain at least one dot

You can't access the root user of the account or remove an account that was created with an invalid email address.

IamUserAccessToBilling

: Type: string

If set to ALLOW, the new account enables IAM users to access account billing information if they have the required permissions. If set to DENY, only the root user of the new account can access account billing information. For more information, see About IAM access to the Billing and Cost Management console in the Amazon Web Services Billing and Cost Management User Guide.

If you don't specify this parameter, the value defaults to ALLOW, and IAM users and roles with the required permissions can access billing information for the new account.

RoleName

: Type: string

The name of an IAM role that Organizations automatically preconfigures in the new member account. This role trusts the management account, allowing users in the management account to assume the role, as permitted by the management account administrator. The role has administrator permissions in the new member account.

If you don't specify this parameter, the role name defaults to OrganizationAccountAccessRole.

For more information about how to use this role to access the member account, see the following links:

Creating the OrganizationAccountAccessRole in an invited member account in the Organizations User Guide
Steps 2 and 3 in IAM Tutorial: Delegate access across Amazon Web Services accounts using IAM roles in the IAM User Guide

The regex pattern that is used to validate this parameter. The pattern can include uppercase letters, lowercase letters, digits with no spaces, and any of the following characters: =,.@-

Tags

: Type: Array of Tag structures

A list of tags that you want to attach to the newly created account. For each tag in the list, you must specify both a tag key and a value. You can set the value to an empty string, but you can't set it to null. For more information about tagging, see Tagging Organizations resources in the Organizations User Guide.

If any one of the tags is not valid or if you exceed the maximum allowed number of tags for an account, then the entire request fails and the account is not created.

Result Syntax

[
    'CreateAccountStatus' => [
        'AccountId' => '<string>',
        'AccountName' => '<string>',
        'CompletedTimestamp' => <DateTime>,
        'FailureReason' => 'ACCOUNT_LIMIT_EXCEEDED|EMAIL_ALREADY_EXISTS|INVALID_ADDRESS|INVALID_EMAIL|CONCURRENT_ACCOUNT_MODIFICATION|INTERNAL_FAILURE|GOVCLOUD_ACCOUNT_ALREADY_EXISTS|MISSING_BUSINESS_VALIDATION|FAILED_BUSINESS_VALIDATION|PENDING_BUSINESS_VALIDATION|INVALID_IDENTITY_FOR_BUSINESS_VALIDATION|UNKNOWN_BUSINESS_VALIDATION|MISSING_PAYMENT_INSTRUMENT|INVALID_PAYMENT_INSTRUMENT|UPDATE_EXISTING_RESOURCE_POLICY_WITH_TAGS_NOT_SUPPORTED',
        'GovCloudAccountId' => '<string>',
        'Id' => '<string>',
        'RequestedTimestamp' => <DateTime>,
        'State' => 'IN_PROGRESS|SUCCEEDED|FAILED',
    ],
]

Result Details

Members

CreateAccountStatus

: Type: CreateAccountStatus structure

A structure that contains details about the request to create an account. This response structure might not be fully populated when you first receive it because account creation is an asynchronous process. You can pass the returned CreateAccountStatus ID as a parameter to DescribeCreateAccountStatus to get status about the progress of the request at later times. You can also check the CloudTrail log for the CreateAccountResult event. For more information, see Logging and monitoring in Organizations in the Organizations User Guide.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

The target of the operation is currently being modified by a different request. Try again later.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

FinalizingOrganizationException:

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations couldn't perform the operation because your organization hasn't finished initializing. This can take up to an hour. Try again later. If after one hour you continue to receive this error, contact Amazon Web Services Support.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

This action isn't available in the current Amazon Web Services Region.

Examples

Example 1: To create a new account that is automatically part of the organization

The owner of an organization creates a member account in the organization. The following example shows that when the organization owner creates the member account, the account is preconfigured with the name "Production Account" and an owner email address of susan@example.com. An IAM role is automatically created using the default name because the roleName parameter is not used. AWS Organizations sends Susan a "Welcome to AWS" email:

$result = $client->createAccount([
    'AccountName' => 'Production Account',
    'Email' => 'susan@example.com',
]);

Result syntax:

[
    'CreateAccountStatus' => [
        'Id' => 'car-examplecreateaccountrequestid111',
        'State' => 'IN_PROGRESS',
    ],
]

CreateGovCloudAccount

$result = $client->createGovCloudAccount([/* ... */]);
$promise = $client->createGovCloudAccountAsync([/* ... */]);

This action is available if all of the following are true:

You're authorized to create accounts in the Amazon Web Services GovCloud (US) Region. For more information on the Amazon Web Services GovCloud (US) Region, see the Amazon Web Services GovCloud User Guide.
You already have an account in the Amazon Web Services GovCloud (US) Region that is paired with a management account of an organization in the commercial Region.
You call this action from the management account of your organization in the commercial Region.
You have the organizations:CreateGovCloudAccount permission.

Organizations automatically creates the required service-linked role named AWSServiceRoleForOrganizations. For more information, see Organizations and service-linked roles in the Organizations User Guide.

Amazon Web Services automatically enables CloudTrail for Amazon Web Services GovCloud (US) accounts, but you should also do the following:

Verify that CloudTrail is enabled to store logs.
Create an Amazon S3 bucket for CloudTrail log storage.

For more information, see Verifying CloudTrail Is Enabled in the Amazon Web Services GovCloud User Guide.

If the request includes tags, then the requester must have the organizations:TagResource permission. The tags are attached to the commercial account associated with the GovCloud account, rather than the GovCloud account itself. To add tags to the GovCloud account, call the TagResource operation in the GovCloud Region after the new GovCloud account exists.

You call this action from the management account of your organization in the commercial Region to create a standalone Amazon Web Services account in the Amazon Web Services GovCloud (US) Region. After the account is created, the management account of an organization in the Amazon Web Services GovCloud (US) Region can invite it to that organization. For more information on inviting standalone accounts in the Amazon Web Services GovCloud (US) to join an organization, see Organizations in the Amazon Web Services GovCloud User Guide.

Calling CreateGovCloudAccount is an asynchronous request that Amazon Web Services performs in the background. Because CreateGovCloudAccount operates asynchronously, it can return a successful completion message even though account initialization might still be in progress. You might need to wait a few minutes before you can successfully access the account. To check the status of the request, do one of the following:

Use the OperationId response element from this operation to provide as a parameter to the DescribeCreateAccountStatus operation.
Check the CloudTrail log for the CreateAccountResult event. For information on using CloudTrail with Organizations, see Logging and monitoring in Organizations in the Organizations User Guide.

When you call the CreateGovCloudAccount action, you create two accounts: a standalone account in the Amazon Web Services GovCloud (US) Region and an associated account in the commercial Region for billing and support purposes. The account in the commercial Region is automatically a member of the organization whose credentials made the request. Both accounts are associated with the same email address.

A role is created in the new account in the commercial Region that allows the management account in the organization in the commercial Region to assume it. An Amazon Web Services GovCloud (US) account is then created and associated with the commercial account that you just created. A role is also created in the new Amazon Web Services GovCloud (US) account that can be assumed by the Amazon Web Services GovCloud (US) account that is associated with the management account of the commercial organization. For more information and to view a diagram that explains how account access works, see Organizations in the Amazon Web Services GovCloud User Guide.

For more information about creating accounts, see Creating a member account in your organization in the Organizations User Guide.

When you create an account in an organization using the Organizations console, API, or CLI commands, the information required for the account to operate as a standalone account is not automatically collected. This includes a payment method and signing the end user license agreement (EULA). If you must remove an account from your organization later, you can do so only after you provide the missing information. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
If you get an exception that indicates that you exceeded your account limits for the organization, contact Amazon Web Services Support.
If you get an exception that indicates that the operation failed because your organization is still initializing, wait one hour and then try again. If the error persists, contact Amazon Web Services Support.
Using CreateGovCloudAccount to create multiple temporary accounts isn't recommended. You can only close an account from the Amazon Web Services Billing and Cost Management console, and you must be signed in as the root user. For information on the requirements and process for closing an account, see Closing a member account in your organization in the Organizations User Guide.

Parameter Syntax

$result = $client->createGovCloudAccount([
    'AccountName' => '<string>', // REQUIRED
    'Email' => '<string>', // REQUIRED
    'IamUserAccessToBilling' => 'ALLOW|DENY',
    'RoleName' => '<string>',
    'Tags' => [
        [
            'Key' => '<string>', // REQUIRED
            'Value' => '<string>', // REQUIRED
        ],
        // ...
    ],
]);

Parameter Details

Members

AccountName

: Required: Yes
: Type: string

The friendly name of the member account.

The account name can consist of only the characters [a-z],[A-Z],[0-9], hyphen (-), or dot (.) You can't separate characters with a dash (–).

Email

: Required: Yes
: Type: string

Specifies the email address of the owner to assign to the new member account in the commercial Region. This email address must not already be associated with another Amazon Web Services account. You must use a valid email address to complete account creation.

The rules for a valid email address:

The address must be a minimum of 6 and a maximum of 64 characters long.
All characters must be 7-bit ASCII characters.
There must be one and only one @ symbol, which separates the local name from the domain name.
The local name can't contain any of the following characters:

whitespace, " ' ( ) < > [ ] : ; , \ | % &
The local name can't begin with a dot (.)
The domain name can consist of only the characters [a-z],[A-Z],[0-9], hyphen (-), or dot (.)
The domain name can't begin or end with a hyphen (-) or dot (.)
The domain name must contain at least one dot

You can't access the root user of the account or remove an account that was created with an invalid email address. Like all request parameters for CreateGovCloudAccount, the request for the email address for the Amazon Web Services GovCloud (US) account originates from the commercial Region, not from the Amazon Web Services GovCloud (US) Region.

IamUserAccessToBilling

: Type: string

If set to ALLOW, the new linked account in the commercial Region enables IAM users to access account billing information if they have the required permissions. If set to DENY, only the root user of the new account can access account billing information. For more information, see About IAM access to the Billing and Cost Management console in the Amazon Web Services Billing and Cost Management User Guide.

If you don't specify this parameter, the value defaults to ALLOW, and IAM users and roles with the required permissions can access billing information for the new account.

RoleName

: Type: string

(Optional)

The name of an IAM role that Organizations automatically preconfigures in the new member accounts in both the Amazon Web Services GovCloud (US) Region and in the commercial Region. This role trusts the management account, allowing users in the management account to assume the role, as permitted by the management account administrator. The role has administrator permissions in the new member account.

If you don't specify this parameter, the role name defaults to OrganizationAccountAccessRole.

For more information about how to use this role to access the member account, see the following links:

Creating the OrganizationAccountAccessRole in an invited member account in the Organizations User Guide
Steps 2 and 3 in IAM Tutorial: Delegate access across Amazon Web Services accounts using IAM roles in the IAM User Guide

The regex pattern that is used to validate this parameter. The pattern can include uppercase letters, lowercase letters, digits with no spaces, and any of the following characters: =,.@-

Tags

: Type: Array of Tag structures

A list of tags that you want to attach to the newly created account. These tags are attached to the commercial account associated with the GovCloud account, and not to the GovCloud account itself. To add tags to the actual GovCloud account, call the TagResource operation in the GovCloud region after the new GovCloud account exists.

For each tag in the list, you must specify both a tag key and a value. You can set the value to an empty string, but you can't set it to null. For more information about tagging, see Tagging Organizations resources in the Organizations User Guide.

If any one of the tags is not valid or if you exceed the maximum allowed number of tags for an account, then the entire request fails and the account is not created.

Result Syntax

[
    'CreateAccountStatus' => [
        'AccountId' => '<string>',
        'AccountName' => '<string>',
        'CompletedTimestamp' => <DateTime>,
        'FailureReason' => 'ACCOUNT_LIMIT_EXCEEDED|EMAIL_ALREADY_EXISTS|INVALID_ADDRESS|INVALID_EMAIL|CONCURRENT_ACCOUNT_MODIFICATION|INTERNAL_FAILURE|GOVCLOUD_ACCOUNT_ALREADY_EXISTS|MISSING_BUSINESS_VALIDATION|FAILED_BUSINESS_VALIDATION|PENDING_BUSINESS_VALIDATION|INVALID_IDENTITY_FOR_BUSINESS_VALIDATION|UNKNOWN_BUSINESS_VALIDATION|MISSING_PAYMENT_INSTRUMENT|INVALID_PAYMENT_INSTRUMENT|UPDATE_EXISTING_RESOURCE_POLICY_WITH_TAGS_NOT_SUPPORTED',
        'GovCloudAccountId' => '<string>',
        'Id' => '<string>',
        'RequestedTimestamp' => <DateTime>,
        'State' => 'IN_PROGRESS|SUCCEEDED|FAILED',
    ],
]

Result Details

Members

CreateAccountStatus

: Type: CreateAccountStatus structure

Contains the status about a CreateAccount or CreateGovCloudAccount request to create an Amazon Web Services account or an Amazon Web Services GovCloud (US) account in an organization.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

The target of the operation is currently being modified by a different request. Try again later.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

FinalizingOrganizationException:

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

This action isn't available in the current Amazon Web Services Region.

CreateOrganization

$result = $client->createOrganization([/* ... */]);
$promise = $client->createOrganizationAsync([/* ... */]);

Creates an Amazon Web Services organization. The account whose user is calling the CreateOrganization operation automatically becomes the management account of the new organization.

This operation must be called using credentials from the account that is to become the new organization's management account. The principal must also have the relevant IAM permissions.

By default (or if you set the FeatureSet parameter to ALL), the new organization is created with all features enabled and service control policies automatically enabled in the root. If you instead choose to create the organization supporting only the consolidated billing features by setting the FeatureSet parameter to CONSOLIDATED_BILLING, no policy types are enabled by default and you can't use organization policies.

Parameter Syntax

$result = $client->createOrganization([
    'FeatureSet' => 'ALL|CONSOLIDATED_BILLING',
]);

Parameter Details

Members

FeatureSet

: Type: string

Specifies the feature set supported by the new organization. Each feature set supports different levels of functionality.

CONSOLIDATED_BILLING: All member accounts have their bills consolidated to and paid by the management account. For more information, see Consolidated billing in the Organizations User Guide.

The consolidated billing feature subset isn't available for organizations in the Amazon Web Services GovCloud (US) Region.
ALL: In addition to all the features supported by the consolidated billing feature set, the management account can also apply any policy type to any member account in the organization. For more information, see All features in the Organizations User Guide.

Result Syntax

[
    'Organization' => [
        'Arn' => '<string>',
        'AvailablePolicyTypes' => [
            [
                'Status' => 'ENABLED|PENDING_ENABLE|PENDING_DISABLE',
                'Type' => 'SERVICE_CONTROL_POLICY|RESOURCE_CONTROL_POLICY|TAG_POLICY|BACKUP_POLICY|AISERVICES_OPT_OUT_POLICY|CHATBOT_POLICY|DECLARATIVE_POLICY_EC2',
            ],
            // ...
        ],
        'FeatureSet' => 'ALL|CONSOLIDATED_BILLING',
        'Id' => '<string>',
        'MasterAccountArn' => '<string>',
        'MasterAccountEmail' => '<string>',
        'MasterAccountId' => '<string>',
    ],
]

Result Details

Members

Organization

: Type: Organization structure

A structure that contains details about the newly created organization.

Errors

AlreadyInOrganizationException:

This account is already a member of an organization. An account can belong to only one organization at a time.

The target of the operation is currently being modified by a different request. Try again later.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

AccessDeniedForDependencyException:

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Examples

Example 1: To create a new organization with all features enabled

Bill wants to create an organization using credentials from account 111111111111. The following example shows that the account becomes the master account in the new organization. Because he does not specify a feature set, the new organization defaults to all features enabled and service control policies enabled on the root:

$result = $client->createOrganization([
]);

Result syntax:

[
    'Organization' => [
        'Arn' => 'arn:aws:organizations::111111111111:organization/o-exampleorgid',
        'AvailablePolicyTypes' => [
            [
                'Status' => 'ENABLED',
                'Type' => 'SERVICE_CONTROL_POLICY',
            ],
        ],
        'FeatureSet' => 'ALL',
        'Id' => 'o-exampleorgid',
        'MasterAccountArn' => 'arn:aws:organizations::111111111111:account/o-exampleorgid/111111111111',
        'MasterAccountEmail' => 'bill@example.com',
        'MasterAccountId' => '111111111111',
    ],
]

Example 2: To create a new organization with consolidated billing features only

In the following example, Bill creates an organization using credentials from account 111111111111, and configures the organization to support only the consolidated billing feature set:

$result = $client->createOrganization([
    'FeatureSet' => 'CONSOLIDATED_BILLING',
]);

Result syntax:

[
    'Organization' => [
        'Arn' => 'arn:aws:organizations::111111111111:organization/o-exampleorgid',
        'AvailablePolicyTypes' => [
        ],
        'FeatureSet' => 'CONSOLIDATED_BILLING',
        'Id' => 'o-exampleorgid',
        'MasterAccountArn' => 'arn:aws:organizations::111111111111:account/o-exampleorgid/111111111111',
        'MasterAccountEmail' => 'bill@example.com',
        'MasterAccountId' => '111111111111',
    ],
]

CreateOrganizationalUnit

$result = $client->createOrganizationalUnit([/* ... */]);
$promise = $client->createOrganizationalUnitAsync([/* ... */]);

Creates an organizational unit (OU) within a root or parent OU. An OU is a container for accounts that enables you to organize your accounts to apply policies according to your business requirements. The number of levels deep that you can nest OUs is dependent upon the policy types enabled for that root. For service control policies, the limit is five.

For more information about OUs, see Managing organizational units (OUs) in the Organizations User Guide.

If the request includes tags, then the requester must have the organizations:TagResource permission.

This operation can be called only from the organization's management account.

Parameter Syntax

$result = $client->createOrganizationalUnit([
    'Name' => '<string>', // REQUIRED
    'ParentId' => '<string>', // REQUIRED
    'Tags' => [
        [
            'Key' => '<string>', // REQUIRED
            'Value' => '<string>', // REQUIRED
        ],
        // ...
    ],
]);

Parameter Details

Members

Name

: Required: Yes
: Type: string

The friendly name to assign to the new OU.

ParentId

: Required: Yes
: Type: string

The unique identifier (ID) of the parent root or OU that you want to create the new OU in.

The regex pattern for a parent ID string requires one of the following:

Root - A string that begins with "r-" followed by from 4 to 32 lowercase letters or digits.
Organizational unit (OU) - A string that begins with "ou-" followed by from 4 to 32 lowercase letters or digits (the ID of the root that the OU is in). This string is followed by a second "-" dash and from 8 to 32 additional lowercase letters or digits.

Tags

: Type: Array of Tag structures

A list of tags that you want to attach to the newly created OU. For each tag in the list, you must specify both a tag key and a value. You can set the value to an empty string, but you can't set it to null. For more information about tagging, see Tagging Organizations resources in the Organizations User Guide.

If any one of the tags is not valid or if you exceed the allowed number of tags for an OU, then the entire request fails and the OU is not created.

Result Syntax

[
    'OrganizationalUnit' => [
        'Arn' => '<string>',
        'Id' => '<string>',
        'Name' => '<string>',
    ],
]

Result Details

Members

OrganizationalUnit

: Type: OrganizationalUnit structure

A structure that contains details about the newly created OU.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

The target of the operation is currently being modified by a different request. Try again later.

DuplicateOrganizationalUnitException:

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

An OU with the same name already exists.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

We can't find a root or OU with the ParentId that you specified.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Examples

Example 1: To create a new organization unit

The following example shows how to create an OU that is named AccountingOU. The new OU is directly under the root.:

$result = $client->createOrganizationalUnit([
    'Name' => 'AccountingOU',
    'ParentId' => 'r-examplerootid111',
]);

Result syntax:

[
    'OrganizationalUnit' => [
        'Arn' => 'arn:aws:organizations::111111111111:ou/o-exampleorgid/ou-examplerootid111-exampleouid111',
        'Id' => 'ou-examplerootid111-exampleouid111',
        'Name' => 'AccountingOU',
    ],
]

CreatePolicy

$result = $client->createPolicy([/* ... */]);
$promise = $client->createPolicyAsync([/* ... */]);

Creates a policy of a specified type that you can attach to a root, an organizational unit (OU), or an individual Amazon Web Services account.

For more information about policies and their use, see Managing Organizations policies.

If the request includes tags, then the requester must have the organizations:TagResource permission.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->createPolicy([
    'Content' => '<string>', // REQUIRED
    'Description' => '<string>', // REQUIRED
    'Name' => '<string>', // REQUIRED
    'Tags' => [
        [
            'Key' => '<string>', // REQUIRED
            'Value' => '<string>', // REQUIRED
        ],
        // ...
    ],
    'Type' => 'SERVICE_CONTROL_POLICY|RESOURCE_CONTROL_POLICY|TAG_POLICY|BACKUP_POLICY|AISERVICES_OPT_OUT_POLICY|CHATBOT_POLICY|DECLARATIVE_POLICY_EC2', // REQUIRED
]);

Parameter Details

Members

Content

: Required: Yes
: Type: string

The policy text content to add to the new policy. The text that you supply must adhere to the rules of the policy type you specify in the Type parameter.

The maximum size of a policy document depends on the policy's type. For more information, see Maximum and minimum values in the Organizations User Guide.

Description

: Required: Yes
: Type: string

An optional description to assign to the policy.

Name

: Required: Yes
: Type: string

The friendly name to assign to the policy.

The regex pattern that is used to validate this parameter is a string of any of the characters in the ASCII character range.

Tags

: Type: Array of Tag structures

A list of tags that you want to attach to the newly created policy. For each tag in the list, you must specify both a tag key and a value. You can set the value to an empty string, but you can't set it to null. For more information about tagging, see Tagging Organizations resources in the Organizations User Guide.

If any one of the tags is not valid or if you exceed the allowed number of tags for a policy, then the entire request fails and the policy is not created.

Type

: Required: Yes
: Type: string

The type of policy to create. You can specify one of the following values:

Result Syntax

[
    'Policy' => [
        'Content' => '<string>',
        'PolicySummary' => [
            'Arn' => '<string>',
            'AwsManaged' => true || false,
            'Description' => '<string>',
            'Id' => '<string>',
            'Name' => '<string>',
            'Type' => 'SERVICE_CONTROL_POLICY|RESOURCE_CONTROL_POLICY|TAG_POLICY|BACKUP_POLICY|AISERVICES_OPT_OUT_POLICY|CHATBOT_POLICY|DECLARATIVE_POLICY_EC2',
        ],
    ],
]

Result Details

Members

Policy

: Type: Policy structure

A structure that contains details about the newly created policy.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

The target of the operation is currently being modified by a different request. Try again later.

DuplicatePolicyException:

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

A policy with the same name already exists.

MalformedPolicyDocumentException:

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

The provided policy document doesn't meet the requirements of the specified policy type. For example, the syntax might be incorrect. For details about service control policy syntax, see SCP syntax in the Organizations User Guide.

PolicyTypeNotAvailableForOrganizationException:

You can't use the specified policy type with the feature set currently enabled for this organization. For example, you can enable SCPs only after you enable all features in the organization. For more information, see Managing Organizations policiesin the Organizations User Guide.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

This action isn't available in the current Amazon Web Services Region.

Examples

Example 1: To create a service control policy

The following example shows how to create a service control policy (SCP) that is named AllowAllS3Actions. The JSON string in the content parameter specifies the content in the policy. The parameter string is escaped with backslashes to ensure that the embedded double quotes in the JSON policy are treated as literals in the parameter, which itself is surrounded by double quotes:

$result = $client->createPolicy([
    'Content' => '{\"Version\":\"2012-10-17\",\"Statement\":{\"Effect\":\"Allow\",\"Action\":\"s3:*\"}}',
    'Description' => 'Enables admins of attached accounts to delegate all S3 permissions',
    'Name' => 'AllowAllS3Actions',
    'Type' => 'SERVICE_CONTROL_POLICY',
]);

Result syntax:

[
    'Policy' => [
        'Content' => '{"Version":"2012-10-17","Statement":{"Effect":"Allow","Action":"s3:*"}}',
        'PolicySummary' => [
            'Arn' => 'arn:aws:organizations::111111111111:policy/o-exampleorgid/service_control_policy/p-examplepolicyid111',
            'Description' => 'Allows delegation of all S3 actions',
            'Name' => 'AllowAllS3Actions',
            'Type' => 'SERVICE_CONTROL_POLICY',
        ],
    ],
]

DeclineHandshake

$result = $client->declineHandshake([/* ... */]);
$promise = $client->declineHandshakeAsync([/* ... */]);

Declines a handshake request. This sets the handshake state to DECLINED and effectively deactivates the request.

This operation can be called only from the account that received the handshake. The originator of the handshake can use CancelHandshake instead. The originator can't reactivate a declined request, but can reinitiate the process with a new handshake request.

After you decline a handshake, it continues to appear in the results of relevant APIs for only 30 days. After that, it's deleted.

Parameter Syntax

$result = $client->declineHandshake([
    'HandshakeId' => '<string>', // REQUIRED
]);

Parameter Details

Members

HandshakeId

: Required: Yes
: Type: string

The unique identifier (ID) of the handshake that you want to decline. You can get the ID from the ListHandshakesForAccount operation.

The regex pattern for handshake ID string requires "h-" followed by from 8 to 32 lowercase letters or digits.

Result Syntax

[
    'Handshake' => [
        'Action' => 'INVITE|ENABLE_ALL_FEATURES|APPROVE_ALL_FEATURES|ADD_ORGANIZATIONS_SERVICE_LINKED_ROLE',
        'Arn' => '<string>',
        'ExpirationTimestamp' => <DateTime>,
        'Id' => '<string>',
        'Parties' => [
            [
                'Id' => '<string>',
                'Type' => 'ACCOUNT|ORGANIZATION|EMAIL',
            ],
            // ...
        ],
        'RequestedTimestamp' => <DateTime>,
        'Resources' => [
            [
                'Resources' => [...], // RECURSIVE
                'Type' => 'ACCOUNT|ORGANIZATION|ORGANIZATION_FEATURE_SET|EMAIL|MASTER_EMAIL|MASTER_NAME|NOTES|PARENT_HANDSHAKE',
                'Value' => '<string>',
            ],
            // ...
        ],
        'State' => 'REQUESTED|OPEN|CANCELED|ACCEPTED|DECLINED|EXPIRED',
    ],
]

Result Details

Members

Handshake

: Type: Handshake structure

A structure that contains details about the declined handshake. The state is updated to show the value DECLINED.

Errors

The target of the operation is currently being modified by a different request. Try again later.

InvalidHandshakeTransitionException:

We can't find a handshake with the HandshakeId that you specified.

You can't perform the operation on the handshake in its current state. For example, you can't cancel a handshake that was already accepted or accept a handshake that was already declined.

HandshakeAlreadyInStateException:

The specified handshake is already in the requested state. For example, you can't accept a handshake that was already accepted.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Examples

Example 1: To decline a handshake sent from the master account

The following example shows Susan declining an invitation to join Bill's organization. The DeclineHandshake operation returns a handshake object, showing that the state is now DECLINED:

$result = $client->declineHandshake([
    'HandshakeId' => 'h-examplehandshakeid111',
]);

Result syntax:

[
    'Handshake' => [
        'Action' => 'INVITE',
        'Arn' => 'arn:aws:organizations::111111111111:handshake/o-exampleorgid/invite/h-examplehandshakeid111',
        'ExpirationTimestamp' => ,
        'Id' => 'h-examplehandshakeid111',
        'Parties' => [
            [
                'Id' => '222222222222',
                'Type' => 'ACCOUNT',
            ],
            [
                'Id' => 'o-exampleorgid',
                'Type' => 'ORGANIZATION',
            ],
        ],
        'RequestedTimestamp' => ,
        'Resources' => [
            [
                'Resources' => [
                    [
                        'Type' => 'MASTER_EMAIL',
                        'Value' => 'bill@example.com',
                    ],
                    [
                        'Type' => 'MASTER_NAME',
                        'Value' => 'Master Account',
                    ],
                ],
                'Type' => 'ORGANIZATION',
                'Value' => 'o-exampleorgid',
            ],
            [
                'Type' => 'ACCOUNT',
                'Value' => '222222222222',
            ],
            [
                'Type' => 'NOTES',
                'Value' => 'This is an invitation to Susan's account to join the Bill's organization.',
            ],
        ],
        'State' => 'DECLINED',
    ],
]

DeleteOrganization

$result = $client->deleteOrganization([/* ... */]);
$promise = $client->deleteOrganizationAsync([/* ... */]);

Deletes the organization. You can delete an organization only by using credentials from the management account. The organization must be empty of member accounts.

Parameter Syntax

$result = $client->deleteOrganization([
]);

Parameter Details

Members

Result Syntax

[]

Result Details

The results for this operation are always empty.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

The target of the operation is currently being modified by a different request. Try again later.

OrganizationNotEmptyException:

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

The organization isn't empty. To delete an organization, you must first remove all accounts except the management account.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

DeleteOrganizationalUnit

$result = $client->deleteOrganizationalUnit([/* ... */]);
$promise = $client->deleteOrganizationalUnitAsync([/* ... */]);

Deletes an organizational unit (OU) from a root or another OU. You must first remove all accounts and child OUs from the OU that you want to delete.

This operation can be called only from the organization's management account.

Parameter Syntax

$result = $client->deleteOrganizationalUnit([
    'OrganizationalUnitId' => '<string>', // REQUIRED
]);

Parameter Details

Members

OrganizationalUnitId

: Required: Yes
: Type: string

The unique identifier (ID) of the organizational unit that you want to delete. You can get the ID from the ListOrganizationalUnitsForParent operation.

The regex pattern for an organizational unit ID string requires "ou-" followed by from 4 to 32 lowercase letters or digits (the ID of the root that contains the OU). This string is followed by a second "-" dash and from 8 to 32 additional lowercase letters or digits.

Result Syntax

[]

Result Details

The results for this operation are always empty.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

The target of the operation is currently being modified by a different request. Try again later.

OrganizationalUnitNotEmptyException:

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

The specified OU is not empty. Move all accounts to another root or to other OUs, remove all child OUs, and try the operation again.

OrganizationalUnitNotFoundException:

We can't find an OU with the OrganizationalUnitId that you specified.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Examples

Example 1: To delete an organization unit

The following example shows how to delete an OU. The example assumes that you previously removed all accounts and other OUs from the OU:

$result = $client->deleteOrganizationalUnit([
    'OrganizationalUnitId' => 'ou-examplerootid111-exampleouid111',
]);

DeletePolicy

$result = $client->deletePolicy([/* ... */]);
$promise = $client->deletePolicyAsync([/* ... */]);

Deletes the specified policy from your organization. Before you perform this operation, you must first detach the policy from all organizational units (OUs), roots, and accounts.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->deletePolicy([
    'PolicyId' => '<string>', // REQUIRED
]);

Parameter Details

Members

PolicyId

: Required: Yes
: Type: string

The unique identifier (ID) of the policy that you want to delete. You can get the ID from the ListPolicies or ListPoliciesForTarget operations.

The regex pattern for a policy ID string requires "p-" followed by from 8 to 128 lowercase or uppercase letters, digits, or the underscore character (_).

Result Syntax

[]

Result Details

The results for this operation are always empty.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

The target of the operation is currently being modified by a different request. Try again later.

PolicyInUseException:

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

The policy is attached to one or more entities. You must detach it from all roots, OUs, and accounts before performing this operation.

We can't find a policy with the PolicyId that you specified.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

This action isn't available in the current Amazon Web Services Region.

Examples

Example 1: To delete a policy

The following example shows how to delete a policy from an organization. The example assumes that you previously detached the policy from all entities:

$result = $client->deletePolicy([
    'PolicyId' => 'p-examplepolicyid111',
]);

DeleteResourcePolicy

$result = $client->deleteResourcePolicy([/* ... */]);
$promise = $client->deleteResourcePolicyAsync([/* ... */]);

Deletes the resource policy from your organization.

You can only call this operation from the organization's management account.

Parameter Syntax

$result = $client->deleteResourcePolicy([
]);

Parameter Details

Members

Result Syntax

[]

Result Details

The results for this operation are always empty.

Errors

Organizations can't complete your request because of an internal service error. Try again later.

This action isn't available in the current Amazon Web Services Region.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

The target of the operation is currently being modified by a different request. Try again later.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

ResourcePolicyNotFoundException:

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

We can't find a resource policy request with the parameter that you specified.

DeregisterDelegatedAdministrator

$result = $client->deregisterDelegatedAdministrator([/* ... */]);
$promise = $client->deregisterDelegatedAdministratorAsync([/* ... */]);

Removes the specified member Amazon Web Services account as a delegated administrator for the specified Amazon Web Services service.

Deregistering a delegated administrator can have unintended impacts on the functionality of the enabled Amazon Web Services service. See the documentation for the enabled service before you deregister a delegated administrator so that you understand any potential impacts.

You can run this action only for Amazon Web Services services that support this feature. For a current list of services that support it, see the column Supports Delegated Administrator in the table at Amazon Web Services Services that you can use with Organizations in the Organizations User Guide.

This operation can be called only from the organization's management account.

Parameter Syntax

$result = $client->deregisterDelegatedAdministrator([
    'AccountId' => '<string>', // REQUIRED
    'ServicePrincipal' => '<string>', // REQUIRED
]);

Parameter Details

Members

AccountId

: Required: Yes
: Type: string

The account ID number of the member account in the organization that you want to deregister as a delegated administrator.

ServicePrincipal

: Required: Yes
: Type: string

The service principal name of an Amazon Web Services service for which the account is a delegated administrator.

Delegated administrator privileges are revoked for only the specified Amazon Web Services service from the member account. If the specified service is the only service for which the member account is a delegated administrator, the operation also revokes Organizations read action permissions.

Result Syntax

[]

Result Details

The results for this operation are always empty.

Errors

AccountNotRegisteredException:

We can't find an Amazon Web Services account with the AccountId that you specified, or the account whose credentials you used to make this request isn't a member of an organization.

The specified account is not a delegated administrator for this Amazon Web Services service.

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

The target of the operation is currently being modified by a different request. Try again later.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Organizations can't complete your request because of an internal service error. Try again later.

This action isn't available in the current Amazon Web Services Region.

DescribeAccount

$result = $client->describeAccount([/* ... */]);
$promise = $client->describeAccountAsync([/* ... */]);

Retrieves Organizations-related information about the specified account.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->describeAccount([
    'AccountId' => '<string>', // REQUIRED
]);

Parameter Details

Members

AccountId

: Required: Yes
: Type: string

The unique identifier (ID) of the Amazon Web Services account that you want information about. You can get the ID from the ListAccounts or ListAccountsForParent operations.

The regex pattern for an account ID string requires exactly 12 digits.

Result Syntax

[
    'Account' => [
        'Arn' => '<string>',
        'Email' => '<string>',
        'Id' => '<string>',
        'JoinedMethod' => 'INVITED|CREATED',
        'JoinedTimestamp' => <DateTime>,
        'Name' => '<string>',
        'Status' => 'ACTIVE|SUSPENDED|PENDING_CLOSURE',
    ],
]

Result Details

Members

Account

: Type: Account structure

A structure that contains information about the requested account.

Errors

We can't find an Amazon Web Services account with the AccountId that you specified, or the account whose credentials you used to make this request isn't a member of an organization.

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Examples

Example 1: To get the details about an account

The following example shows a user in the master account (111111111111) asking for details about account 555555555555:

$result = $client->describeAccount([
    'AccountId' => '555555555555',
]);

Result syntax:

[
    'Account' => [
        'Arn' => 'arn:aws:organizations::111111111111:account/o-exampleorgid/555555555555',
        'Email' => 'anika@example.com',
        'Id' => '555555555555',
        'Name' => 'Beta Account',
    ],
]

DescribeCreateAccountStatus

$result = $client->describeCreateAccountStatus([/* ... */]);
$promise = $client->describeCreateAccountStatusAsync([/* ... */]);

Retrieves the current status of an asynchronous request to create an account.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->describeCreateAccountStatus([
    'CreateAccountRequestId' => '<string>', // REQUIRED
]);

Parameter Details

Members

CreateAccountRequestId

: Required: Yes
: Type: string

Specifies the Id value that uniquely identifies the CreateAccount request. You can get the value from the CreateAccountStatus.Id response in an earlier CreateAccount request, or from the ListCreateAccountStatus operation.

The regex pattern for a create account request ID string requires "car-" followed by from 8 to 32 lowercase letters or digits.

Result Syntax

[
    'CreateAccountStatus' => [
        'AccountId' => '<string>',
        'AccountName' => '<string>',
        'CompletedTimestamp' => <DateTime>,
        'FailureReason' => 'ACCOUNT_LIMIT_EXCEEDED|EMAIL_ALREADY_EXISTS|INVALID_ADDRESS|INVALID_EMAIL|CONCURRENT_ACCOUNT_MODIFICATION|INTERNAL_FAILURE|GOVCLOUD_ACCOUNT_ALREADY_EXISTS|MISSING_BUSINESS_VALIDATION|FAILED_BUSINESS_VALIDATION|PENDING_BUSINESS_VALIDATION|INVALID_IDENTITY_FOR_BUSINESS_VALIDATION|UNKNOWN_BUSINESS_VALIDATION|MISSING_PAYMENT_INSTRUMENT|INVALID_PAYMENT_INSTRUMENT|UPDATE_EXISTING_RESOURCE_POLICY_WITH_TAGS_NOT_SUPPORTED',
        'GovCloudAccountId' => '<string>',
        'Id' => '<string>',
        'RequestedTimestamp' => <DateTime>,
        'State' => 'IN_PROGRESS|SUCCEEDED|FAILED',
    ],
]

Result Details

Members

CreateAccountStatus

: Type: CreateAccountStatus structure

A structure that contains the current status of an account creation request.

Errors

CreateAccountStatusNotFoundException:

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

We can't find an create account request with the CreateAccountRequestId that you specified.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

This action isn't available in the current Amazon Web Services Region.

Examples

Example 1: To get information about a request to create an account

The following example shows how to request the status about a previous request to create an account in an organization. This operation can be called only by a principal from the organization's master account. In the example, the specified "createAccountRequestId" comes from the response of the original call to "CreateAccount":

$result = $client->describeCreateAccountStatus([
    'CreateAccountRequestId' => 'car-exampleaccountcreationrequestid',
]);

Result syntax:

[
    'CreateAccountStatus' => [
        'AccountId' => '333333333333',
        'Id' => 'car-exampleaccountcreationrequestid',
        'State' => 'SUCCEEDED',
    ],
]

DescribeEffectivePolicy

$result = $client->describeEffectivePolicy([/* ... */]);
$promise = $client->describeEffectivePolicyAsync([/* ... */]);

Returns the contents of the effective policy for specified policy type and account. The effective policy is the aggregation of any policies of the specified type that the account inherits, plus any policy of that type that is directly attached to the account.

This operation applies only to management policies. It does not apply to authorization policies: service control policies (SCPs) and resource control policies (RCPs).

For more information about policy inheritance, see Understanding management policy inheritance in the Organizations User Guide.

This operation can be called from any account in the organization.

Parameter Syntax

$result = $client->describeEffectivePolicy([
    'PolicyType' => 'TAG_POLICY|BACKUP_POLICY|AISERVICES_OPT_OUT_POLICY|CHATBOT_POLICY|DECLARATIVE_POLICY_EC2', // REQUIRED
    'TargetId' => '<string>',
]);

Parameter Details

Members

PolicyType

: Required: Yes
: Type: string

The type of policy that you want information about. You can specify one of the following values:

TargetId

: Type: string

When you're signed in as the management account, specify the ID of the account that you want details about. Specifying an organization root or organizational unit (OU) as the target is not supported.

Result Syntax

[
    'EffectivePolicy' => [
        'LastUpdatedTimestamp' => <DateTime>,
        'PolicyContent' => '<string>',
        'PolicyType' => 'TAG_POLICY|BACKUP_POLICY|AISERVICES_OPT_OUT_POLICY|CHATBOT_POLICY|DECLARATIVE_POLICY_EC2',
        'TargetId' => '<string>',
    ],
]

Result Details

Members

EffectivePolicy

: Type: EffectivePolicy structure

The contents of the effective policy.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

EffectivePolicyNotFoundException:

We can't find a root, OU, account, or policy with the TargetId that you specified.

If you ran this action on the management account, this policy type is not enabled. If you ran the action on a member account, the account doesn't have an effective policy of this type. Contact the administrator of your organization about attaching a policy of this type to the account.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

This action isn't available in the current Amazon Web Services Region.

DescribeHandshake

$result = $client->describeHandshake([/* ... */]);
$promise = $client->describeHandshakeAsync([/* ... */]);

Retrieves information about a previously requested handshake. The handshake ID comes from the response to the original InviteAccountToOrganization operation that generated the handshake.

You can access handshakes that are ACCEPTED, DECLINED, or CANCELED for only 30 days after they change to that state. They're then deleted and no longer accessible.

This operation can be called from any account in the organization.

Parameter Syntax

$result = $client->describeHandshake([
    'HandshakeId' => '<string>', // REQUIRED
]);

Parameter Details

Members

HandshakeId

: Required: Yes
: Type: string

The unique identifier (ID) of the handshake that you want information about. You can get the ID from the original call to InviteAccountToOrganization, or from a call to ListHandshakesForAccount or ListHandshakesForOrganization.

The regex pattern for handshake ID string requires "h-" followed by from 8 to 32 lowercase letters or digits.

Result Syntax

[
    'Handshake' => [
        'Action' => 'INVITE|ENABLE_ALL_FEATURES|APPROVE_ALL_FEATURES|ADD_ORGANIZATIONS_SERVICE_LINKED_ROLE',
        'Arn' => '<string>',
        'ExpirationTimestamp' => <DateTime>,
        'Id' => '<string>',
        'Parties' => [
            [
                'Id' => '<string>',
                'Type' => 'ACCOUNT|ORGANIZATION|EMAIL',
            ],
            // ...
        ],
        'RequestedTimestamp' => <DateTime>,
        'Resources' => [
            [
                'Resources' => [...], // RECURSIVE
                'Type' => 'ACCOUNT|ORGANIZATION|ORGANIZATION_FEATURE_SET|EMAIL|MASTER_EMAIL|MASTER_NAME|NOTES|PARENT_HANDSHAKE',
                'Value' => '<string>',
            ],
            // ...
        ],
        'State' => 'REQUESTED|OPEN|CANCELED|ACCEPTED|DECLINED|EXPIRED',
    ],
]

Result Details

Members

Handshake

: Type: Handshake structure

A structure that contains information about the specified handshake.

Errors

The target of the operation is currently being modified by a different request. Try again later.

We can't find a handshake with the HandshakeId that you specified.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Examples

Example 1: To get information about a handshake

The following example shows you how to request details about a handshake. The handshake ID comes either from the original call to "InviteAccountToOrganization", or from a call to "ListHandshakesForAccount" or "ListHandshakesForOrganization":

$result = $client->describeHandshake([
    'HandshakeId' => 'h-examplehandshakeid111',
]);

Result syntax:

[
    'Handshake' => [
        'Action' => 'INVITE',
        'Arn' => 'arn:aws:organizations::111111111111:handshake/o-exampleorgid/invite/h-examplehandshakeid111',
        'ExpirationTimestamp' => ,
        'Id' => 'h-examplehandshakeid111',
        'Parties' => [
            [
                'Id' => 'o-exampleorgid',
                'Type' => 'ORGANIZATION',
            ],
            [
                'Id' => '333333333333',
                'Type' => 'ACCOUNT',
            ],
        ],
        'RequestedTimestamp' => ,
        'Resources' => [
            [
                'Resources' => [
                    [
                        'Type' => 'MASTER_EMAIL',
                        'Value' => 'bill@example.com',
                    ],
                    [
                        'Type' => 'MASTER_NAME',
                        'Value' => 'Master Account',
                    ],
                ],
                'Type' => 'ORGANIZATION',
                'Value' => 'o-exampleorgid',
            ],
            [
                'Type' => 'ACCOUNT',
                'Value' => '333333333333',
            ],
        ],
        'State' => 'OPEN',
    ],
]

DescribeOrganization

$result = $client->describeOrganization([/* ... */]);
$promise = $client->describeOrganizationAsync([/* ... */]);

Retrieves information about the organization that the user's account belongs to.

This operation can be called from any account in the organization.

Even if a policy type is shown as available in the organization, you can disable it separately at the root level with DisablePolicyType. Use ListRoots to see the status of policy types for a specified root.

Parameter Syntax

$result = $client->describeOrganization([
]);

Parameter Details

Members

Result Syntax

[
    'Organization' => [
        'Arn' => '<string>',
        'AvailablePolicyTypes' => [
            [
                'Status' => 'ENABLED|PENDING_ENABLE|PENDING_DISABLE',
                'Type' => 'SERVICE_CONTROL_POLICY|RESOURCE_CONTROL_POLICY|TAG_POLICY|BACKUP_POLICY|AISERVICES_OPT_OUT_POLICY|CHATBOT_POLICY|DECLARATIVE_POLICY_EC2',
            ],
            // ...
        ],
        'FeatureSet' => 'ALL|CONSOLIDATED_BILLING',
        'Id' => '<string>',
        'MasterAccountArn' => '<string>',
        'MasterAccountEmail' => '<string>',
        'MasterAccountId' => '<string>',
    ],
]

Result Details

Members

Organization

: Type: Organization structure

A structure that contains information about the organization.

The AvailablePolicyTypes part of the response is deprecated, and you shouldn't use it in your apps. It doesn't include any policy type supported by Organizations other than SCPs. In the China (Ningxia) Region, no policy type is included. To determine which policy types are enabled in your organization, use the ListRoots operation.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

The target of the operation is currently being modified by a different request. Try again later.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Examples

Example 1: To get information about an organization

The following example shows how to request information about the current user's organization:/n/n

$result = $client->describeOrganization([
]);

Result syntax:

[
    'Organization' => [
        'Arn' => 'arn:aws:organizations::111111111111:organization/o-exampleorgid',
        'AvailablePolicyTypes' => [
            [
                'Status' => 'ENABLED',
                'Type' => 'SERVICE_CONTROL_POLICY',
            ],
        ],
        'FeatureSet' => 'ALL',
        'Id' => 'o-exampleorgid',
        'MasterAccountArn' => 'arn:aws:organizations::111111111111:account/o-exampleorgid/111111111111',
        'MasterAccountEmail' => 'bill@example.com',
    ],
]

DescribeOrganizationalUnit

$result = $client->describeOrganizationalUnit([/* ... */]);
$promise = $client->describeOrganizationalUnitAsync([/* ... */]);

Retrieves information about an organizational unit (OU).

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->describeOrganizationalUnit([
    'OrganizationalUnitId' => '<string>', // REQUIRED
]);

Parameter Details

Members

OrganizationalUnitId

: Required: Yes
: Type: string

The unique identifier (ID) of the organizational unit that you want details about. You can get the ID from the ListOrganizationalUnitsForParent operation.

Result Syntax

[
    'OrganizationalUnit' => [
        'Arn' => '<string>',
        'Id' => '<string>',
        'Name' => '<string>',
    ],
]

Result Details

Members

OrganizationalUnit

: Type: OrganizationalUnit structure

A structure that contains details about the specified OU.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

OrganizationalUnitNotFoundException:

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

We can't find an OU with the OrganizationalUnitId that you specified.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Examples

Example 1: To get information about an organizational unit

The following example shows how to request details about an OU:

$result = $client->describeOrganizationalUnit([
    'OrganizationalUnitId' => 'ou-examplerootid111-exampleouid111',
]);

Result syntax:

[
    'OrganizationalUnit' => [
        'Arn' => 'arn:aws:organizations::111111111111:ou/o-exampleorgid/ou-examplerootid111-exampleouid111',
        'Id' => 'ou-examplerootid111-exampleouid111',
        'Name' => 'Accounting Group',
    ],
]

DescribePolicy

$result = $client->describePolicy([/* ... */]);
$promise = $client->describePolicyAsync([/* ... */]);

Retrieves information about a policy.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->describePolicy([
    'PolicyId' => '<string>', // REQUIRED
]);

Parameter Details

Members

PolicyId

: Required: Yes
: Type: string

The unique identifier (ID) of the policy that you want details about. You can get the ID from the ListPolicies or ListPoliciesForTarget operations.

The regex pattern for a policy ID string requires "p-" followed by from 8 to 128 lowercase or uppercase letters, digits, or the underscore character (_).

Result Syntax

[
    'Policy' => [
        'Content' => '<string>',
        'PolicySummary' => [
            'Arn' => '<string>',
            'AwsManaged' => true || false,
            'Description' => '<string>',
            'Id' => '<string>',
            'Name' => '<string>',
            'Type' => 'SERVICE_CONTROL_POLICY|RESOURCE_CONTROL_POLICY|TAG_POLICY|BACKUP_POLICY|AISERVICES_OPT_OUT_POLICY|CHATBOT_POLICY|DECLARATIVE_POLICY_EC2',
        ],
    ],
]

Result Details

Members

Policy

: Type: Policy structure

A structure that contains details about the specified policy.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

We can't find a policy with the PolicyId that you specified.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

This action isn't available in the current Amazon Web Services Region.

Examples

Example 1: To get information about a policy

The following example shows how to request information about a policy:/n/n

$result = $client->describePolicy([
    'PolicyId' => 'p-examplepolicyid111',
]);

Result syntax:

[
    'Policy' => [
        'Content' => '{\n \"Version\": \"2012-10-17\",\n \"Statement\": [\n {\n \"Effect\": \"Allow\",\n \"Action\": \"*\",\n \"Resource\": \"*\"\n }\n ]\n}',
        'PolicySummary' => [
            'Arn' => 'arn:aws:organizations::111111111111:policy/o-exampleorgid/service_control_policy/p-examplepolicyid111',
            'AwsManaged' => ,
            'Description' => 'Enables admins to delegate S3 permissions',
            'Id' => 'p-examplepolicyid111',
            'Name' => 'AllowAllS3Actions',
            'Type' => 'SERVICE_CONTROL_POLICY',
        ],
    ],
]

DescribeResourcePolicy

$result = $client->describeResourcePolicy([/* ... */]);
$promise = $client->describeResourcePolicyAsync([/* ... */]);

Retrieves information about a resource policy.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->describeResourcePolicy([
]);

Parameter Details

Members

Result Syntax

[
    'ResourcePolicy' => [
        'Content' => '<string>',
        'ResourcePolicySummary' => [
            'Arn' => '<string>',
            'Id' => '<string>',
        ],
    ],
]

Result Details

Members

ResourcePolicy

: Type: ResourcePolicy structure

A structure that contains details about the resource policy.

Errors

Organizations can't complete your request because of an internal service error. Try again later.

This action isn't available in the current Amazon Web Services Region.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

ResourcePolicyNotFoundException:

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

We can't find a resource policy request with the parameter that you specified.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

DetachPolicy

$result = $client->detachPolicy([/* ... */]);
$promise = $client->detachPolicyAsync([/* ... */]);

Detaches a policy from a target root, organizational unit (OU), or account.

If the policy being detached is a service control policy (SCP), the changes to permissions for Identity and Access Management (IAM) users and roles in affected accounts are immediate.

Every root, OU, and account must have at least one SCP attached. If you want to replace the default FullAWSAccess policy with an SCP that limits the permissions that can be delegated, you must attach the replacement SCP before you can remove the default SCP. This is the authorization strategy of an "allow list". If you instead attach a second SCP and leave the FullAWSAccess SCP still attached, and specify "Effect": "Deny" in the second SCP to override the "Effect": "Allow" in the FullAWSAccess policy (or any other attached SCP), you're using the authorization strategy of a "deny list".

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->detachPolicy([
    'PolicyId' => '<string>', // REQUIRED
    'TargetId' => '<string>', // REQUIRED
]);

Parameter Details

Members

PolicyId

: Required: Yes
: Type: string

The unique identifier (ID) of the policy you want to detach. You can get the ID from the ListPolicies or ListPoliciesForTarget operations.

The regex pattern for a policy ID string requires "p-" followed by from 8 to 128 lowercase or uppercase letters, digits, or the underscore character (_).

TargetId

: Required: Yes
: Type: string

The unique identifier (ID) of the root, OU, or account that you want to detach the policy from. You can get the ID from the ListRoots, ListOrganizationalUnitsForParent, or ListAccounts operations.

The regex pattern for a target ID string requires one of the following:

Root - A string that begins with "r-" followed by from 4 to 32 lowercase letters or digits.
Account - A string that consists of exactly 12 digits.
Organizational unit (OU) - A string that begins with "ou-" followed by from 4 to 32 lowercase letters or digits (the ID of the root that the OU is in). This string is followed by a second "-" dash and from 8 to 32 additional lowercase letters or digits.

Result Syntax

[]

Result Details

The results for this operation are always empty.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

The target of the operation is currently being modified by a different request. Try again later.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

PolicyNotAttachedException:

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

The policy isn't attached to the specified target in the specified root.

We can't find a policy with the PolicyId that you specified.

Organizations can't complete your request because of an internal service error. Try again later.

We can't find a root, OU, account, or policy with the TargetId that you specified.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

This action isn't available in the current Amazon Web Services Region.

Changes to the effective policy are in progress, and its contents can't be returned. Try the operation again later.

Examples

Example 1: To detach a policy from a root, OU, or account

The following example shows how to detach a policy from an OU:/n/n

$result = $client->detachPolicy([
    'PolicyId' => 'p-examplepolicyid111',
    'TargetId' => 'ou-examplerootid111-exampleouid111',
]);

DisableAWSServiceAccess

$result = $client->disableAWSServiceAccess([/* ... */]);
$promise = $client->disableAWSServiceAccessAsync([/* ... */]);

Disables the integration of an Amazon Web Services service (the service that is specified by ServicePrincipal) with Organizations. When you disable integration, the specified service no longer can create a service-linked role in new accounts in your organization. This means the service can't perform operations on your behalf on any new accounts in your organization. The service can still perform operations in older accounts until the service completes its clean-up from Organizations.

We strongly recommend that you don't use this command to disable integration between Organizations and the specified Amazon Web Services service. Instead, use the console or commands that are provided by the specified service. This lets the trusted service perform any required initialization when enabling trusted access, such as creating any required resources and any required clean up of resources when disabling trusted access.

For information about how to disable trusted service access to your organization using the trusted service, see the Learn more link under the Supports Trusted Access column at Amazon Web Services services that you can use with Organizations. on this page.

If you disable access by using this command, it causes the following actions to occur:

The service can no longer create a service-linked role in the accounts in your organization. This means that the service can't perform operations on your behalf on any new accounts in your organization. The service can still perform operations in older accounts until the service completes its clean-up from Organizations.
The service can no longer perform tasks in the member accounts in the organization, unless those operations are explicitly permitted by the IAM policies that are attached to your roles. This includes any data aggregation from the member accounts to the management account, or to a delegated administrator account, where relevant.
Some services detect this and clean up any remaining data or resources related to the integration, while other services stop accessing the organization but leave any historical data and configuration in place to support a possible re-enabling of the integration.

Using the other service's console or commands to disable the integration ensures that the other service is aware that it can clean up any resources that are required only for the integration. How the service cleans up its resources in the organization's accounts depends on that service. For more information, see the documentation for the other Amazon Web Services service.

After you perform the DisableAWSServiceAccess operation, the specified service can no longer perform operations in your organization's accounts

For more information about integrating other services with Organizations, including the list of services that work with Organizations, see Using Organizations with other Amazon Web Services services in the Organizations User Guide.

This operation can be called only from the organization's management account.

Parameter Syntax

$result = $client->disableAWSServiceAccess([
    'ServicePrincipal' => '<string>', // REQUIRED
]);

Parameter Details

Members

ServicePrincipal

: Required: Yes
: Type: string

The service principal name of the Amazon Web Services service for which you want to disable integration with your organization. This is typically in the form of a URL, such as service-abbreviation.amazonaws.com.

Result Syntax

[]

Result Details

The results for this operation are always empty.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

The target of the operation is currently being modified by a different request. Try again later.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

This action isn't available in the current Amazon Web Services Region.

DisablePolicyType

$result = $client->disablePolicyType([/* ... */]);
$promise = $client->disablePolicyTypeAsync([/* ... */]);

Disables an organizational policy type in a root. A policy of a certain type can be attached to entities in a root only if that type is enabled in the root. After you perform this operation, you no longer can attach policies of the specified type to that root or to any organizational unit (OU) or account in that root. You can undo this by using the EnablePolicyType operation.

This is an asynchronous request that Amazon Web Services performs in the background. If you disable a policy type for a root, it still appears enabled for the organization if all features are enabled for the organization. Amazon Web Services recommends that you first use ListRoots to see the status of policy types for a specified root, and then use this operation.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

To view the status of available policy types in the organization, use DescribeOrganization.

Parameter Syntax

$result = $client->disablePolicyType([
    'PolicyType' => 'SERVICE_CONTROL_POLICY|RESOURCE_CONTROL_POLICY|TAG_POLICY|BACKUP_POLICY|AISERVICES_OPT_OUT_POLICY|CHATBOT_POLICY|DECLARATIVE_POLICY_EC2', // REQUIRED
    'RootId' => '<string>', // REQUIRED
]);

Parameter Details

Members

PolicyType

: Required: Yes
: Type: string

The policy type that you want to disable in this root. You can specify one of the following values:

RootId

: Required: Yes
: Type: string

The unique identifier (ID) of the root in which you want to disable a policy type. You can get the ID from the ListRoots operation.

The regex pattern for a root ID string requires "r-" followed by from 4 to 32 lowercase letters or digits.

Result Syntax

[
    'Root' => [
        'Arn' => '<string>',
        'Id' => '<string>',
        'Name' => '<string>',
        'PolicyTypes' => [
            [
                'Status' => 'ENABLED|PENDING_ENABLE|PENDING_DISABLE',
                'Type' => 'SERVICE_CONTROL_POLICY|RESOURCE_CONTROL_POLICY|TAG_POLICY|BACKUP_POLICY|AISERVICES_OPT_OUT_POLICY|CHATBOT_POLICY|DECLARATIVE_POLICY_EC2',
            ],
            // ...
        ],
    ],
]

Result Details

Members

Root

: Type: Root structure

A structure that shows the root with the updated list of enabled policy types.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

The target of the operation is currently being modified by a different request. Try again later.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

PolicyTypeNotEnabledException:

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

RootNotFoundException:

We can't find a root with the RootId that you specified.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

This action isn't available in the current Amazon Web Services Region.

Changes to the effective policy are in progress, and its contents can't be returned. Try the operation again later.

Examples

Example 1: To disable a policy type in a root

The following example shows how to disable the service control policy (SCP) policy type in a root. The response shows that the PolicyTypes response element no longer includes SERVICE_CONTROL_POLICY:/n/n

$result = $client->disablePolicyType([
    'PolicyType' => 'SERVICE_CONTROL_POLICY',
    'RootId' => 'r-examplerootid111',
]);

Result syntax:

[
    'Root' => [
        'Arn' => 'arn:aws:organizations::111111111111:root/o-exampleorgid/r-examplerootid111',
        'Id' => 'r-examplerootid111',
        'Name' => 'Root',
        'PolicyTypes' => [
        ],
    ],
]

EnableAWSServiceAccess

$result = $client->enableAWSServiceAccess([/* ... */]);
$promise = $client->enableAWSServiceAccessAsync([/* ... */]);

Provides an Amazon Web Services service (the service that is specified by ServicePrincipal) with permissions to view the structure of an organization, create a service-linked role in all the accounts in the organization, and allow the service to perform operations on behalf of the organization and its accounts. Establishing these permissions can be a first step in enabling the integration of an Amazon Web Services service with Organizations.

We recommend that you enable integration between Organizations and the specified Amazon Web Services service by using the console or commands that are provided by the specified service. Doing so ensures that the service is aware that it can create the resources that are required for the integration. How the service creates those resources in the organization's accounts depends on that service. For more information, see the documentation for the other Amazon Web Services service.

For more information about enabling services to integrate with Organizations, see Using Organizations with other Amazon Web Services services in the Organizations User Guide.

You can only call this operation from the organization's management account and only if the organization has enabled all features.

Parameter Syntax

$result = $client->enableAWSServiceAccess([
    'ServicePrincipal' => '<string>', // REQUIRED
]);

Parameter Details

Members

ServicePrincipal

: Required: Yes
: Type: string

The service principal name of the Amazon Web Services service for which you want to enable integration with your organization. This is typically in the form of a URL, such as service-abbreviation.amazonaws.com.

Result Syntax

[]

Result Details

The results for this operation are always empty.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

The target of the operation is currently being modified by a different request. Try again later.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

This action isn't available in the current Amazon Web Services Region.

EnableAllFeatures

$result = $client->enableAllFeatures([/* ... */]);
$promise = $client->enableAllFeaturesAsync([/* ... */]);

Enables all features in an organization. This enables the use of organization policies that can restrict the services and actions that can be called in each account. Until you enable all features, you have access only to consolidated billing, and you can't use any of the advanced account administration features that Organizations supports. For more information, see Enabling all features in your organization in the Organizations User Guide.

This operation is required only for organizations that were created explicitly with only the consolidated billing features enabled. Calling this operation sends a handshake to every invited account in the organization. The feature set change can be finalized and the additional features enabled only after all administrators in the invited accounts approve the change by accepting the handshake.

After you enable all features, you can separately enable or disable individual policy types in a root using EnablePolicyType and DisablePolicyType. To see the status of policy types in a root, use ListRoots.

After all invited member accounts accept the handshake, you finalize the feature set change by accepting the handshake that contains "Action": "ENABLE_ALL_FEATURES". This completes the change.

After you enable all features in your organization, the management account in the organization can apply policies on all member accounts. These policies can restrict what users and even administrators in those accounts can do. The management account can apply policies that prevent accounts from leaving the organization. Ensure that your account administrators are aware of this.

This operation can be called only from the organization's management account.

Parameter Syntax

$result = $client->enableAllFeatures([
]);

Parameter Details

Members

Result Syntax

[
    'Handshake' => [
        'Action' => 'INVITE|ENABLE_ALL_FEATURES|APPROVE_ALL_FEATURES|ADD_ORGANIZATIONS_SERVICE_LINKED_ROLE',
        'Arn' => '<string>',
        'ExpirationTimestamp' => <DateTime>,
        'Id' => '<string>',
        'Parties' => [
            [
                'Id' => '<string>',
                'Type' => 'ACCOUNT|ORGANIZATION|EMAIL',
            ],
            // ...
        ],
        'RequestedTimestamp' => <DateTime>,
        'Resources' => [
            [
                'Resources' => [...], // RECURSIVE
                'Type' => 'ACCOUNT|ORGANIZATION|ORGANIZATION_FEATURE_SET|EMAIL|MASTER_EMAIL|MASTER_NAME|NOTES|PARENT_HANDSHAKE',
                'Value' => '<string>',
            ],
            // ...
        ],
        'State' => 'REQUESTED|OPEN|CANCELED|ACCEPTED|DECLINED|EXPIRED',
    ],
]

Result Details

Members

Handshake

: Type: Handshake structure

A structure that contains details about the handshake created to support this request to enable all features in the organization.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

HandshakeConstraintViolationException:

The target of the operation is currently being modified by a different request. Try again later.

The requested operation would violate the constraint identified in the reason code.

Some of the reasons in the following list might not be applicable to this specific API or operation:

ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. Note that deleted and closed accounts still count toward your limit.

If you get this exception immediately after creating the organization, wait one hour and try again. If after an hour it continues to fail with this error, contact Amazon Web Services Support.
ALREADY_IN_AN_ORGANIZATION: The handshake request is invalid because the invited account is already a member of an organization.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVITE_DISABLED_DURING_ENABLE_ALL_FEATURES: You can't issue new invitations to join an organization while it's in the process of enabling all features. You can resume inviting accounts after you finalize the process when all accounts have agreed to the change.
ORGANIZATION_ALREADY_HAS_ALL_FEATURES: The handshake request is invalid because the organization has already enabled all features.
ORGANIZATION_IS_ALREADY_PENDING_ALL_FEATURES_MIGRATION: The handshake request is invalid because the organization has already started the process to enable all features.
ORGANIZATION_FROM_DIFFERENT_SELLER_OF_RECORD: The request failed because the account is from a different marketplace than the accounts in the organization. For example, accounts with India addresses must be associated with the AISPL marketplace. All accounts in an organization must be from the same marketplace.
ORGANIZATION_MEMBERSHIP_CHANGE_RATE_LIMIT_EXCEEDED: You attempted to change the membership of an account too quickly after its previous change.
PAYMENT_INSTRUMENT_REQUIRED: You can't complete the operation with an account that doesn't have a payment instrument, such as a credit card, associated with it.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Examples

Example 1: To enable all features in an organization

This example shows the administrator asking all the invited accounts in the organization to approve enabling all features in the organization. AWS Organizations sends an email to the address that is registered with every invited member account asking the owner to approve the change by accepting the handshake that is sent. After all invited member accounts accept the handshake, the organization administrator can finalize the change to enable all features, and those with appropriate permissions can create policies and apply them to roots, OUs, and accounts:/n/n

$result = $client->enableAllFeatures([
]);

Result syntax:

[
    'Handshake' => [
        'Action' => 'ENABLE_ALL_FEATURES',
        'Arn' => 'arn:aws:organizations::111111111111:handshake/o-exampleorgid/enable_all_features/h-examplehandshakeid111',
        'ExpirationTimestamp' => ,
        'Id' => 'h-examplehandshakeid111',
        'Parties' => [
            [
                'Id' => 'o-exampleorgid',
                'Type' => 'ORGANIZATION',
            ],
        ],
        'RequestedTimestamp' => ,
        'Resources' => [
            [
                'Type' => 'ORGANIZATION',
                'Value' => 'o-exampleorgid',
            ],
        ],
        'State' => 'REQUESTED',
    ],
]

EnablePolicyType

$result = $client->enablePolicyType([/* ... */]);
$promise = $client->enablePolicyTypeAsync([/* ... */]);

Enables a policy type in a root. After you enable a policy type in a root, you can attach policies of that type to the root, any organizational unit (OU), or account in that root. You can undo this by using the DisablePolicyType operation.

This is an asynchronous request that Amazon Web Services performs in the background. Amazon Web Services recommends that you first use ListRoots to see the status of policy types for a specified root, and then use this operation.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

You can enable a policy type in a root only if that policy type is available in the organization. To view the status of available policy types in the organization, use DescribeOrganization.

Parameter Syntax

$result = $client->enablePolicyType([
    'PolicyType' => 'SERVICE_CONTROL_POLICY|RESOURCE_CONTROL_POLICY|TAG_POLICY|BACKUP_POLICY|AISERVICES_OPT_OUT_POLICY|CHATBOT_POLICY|DECLARATIVE_POLICY_EC2', // REQUIRED
    'RootId' => '<string>', // REQUIRED
]);

Parameter Details

Members

PolicyType

: Required: Yes
: Type: string

The policy type that you want to enable. You can specify one of the following values:

RootId

: Required: Yes
: Type: string

The unique identifier (ID) of the root in which you want to enable a policy type. You can get the ID from the ListRoots operation.

The regex pattern for a root ID string requires "r-" followed by from 4 to 32 lowercase letters or digits.

Result Syntax

[
    'Root' => [
        'Arn' => '<string>',
        'Id' => '<string>',
        'Name' => '<string>',
        'PolicyTypes' => [
            [
                'Status' => 'ENABLED|PENDING_ENABLE|PENDING_DISABLE',
                'Type' => 'SERVICE_CONTROL_POLICY|RESOURCE_CONTROL_POLICY|TAG_POLICY|BACKUP_POLICY|AISERVICES_OPT_OUT_POLICY|CHATBOT_POLICY|DECLARATIVE_POLICY_EC2',
            ],
            // ...
        ],
    ],
]

Result Details

Members

Root

: Type: Root structure

A structure that shows the root with the updated list of enabled policy types.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

The target of the operation is currently being modified by a different request. Try again later.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

PolicyTypeAlreadyEnabledException:

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

The specified policy type is already enabled in the specified root.

RootNotFoundException:

We can't find a root with the RootId that you specified.

Organizations can't complete your request because of an internal service error. Try again later.

PolicyTypeNotAvailableForOrganizationException:

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

This action isn't available in the current Amazon Web Services Region.

Changes to the effective policy are in progress, and its contents can't be returned. Try the operation again later.

Examples

Example 1: To enable a policy type in a root

The following example shows how to enable the service control policy (SCP) policy type in a root. The output shows a root object with a PolicyTypes response element showing that SCPs are now enabled:/n/n

$result = $client->enablePolicyType([
    'PolicyType' => 'SERVICE_CONTROL_POLICY',
    'RootId' => 'r-examplerootid111',
]);

Result syntax:

[
    'Root' => [
        'Arn' => 'arn:aws:organizations::111111111111:root/o-exampleorgid/r-examplerootid111',
        'Id' => 'r-examplerootid111',
        'Name' => 'Root',
        'PolicyTypes' => [
            [
                'Status' => 'ENABLED',
                'Type' => 'SERVICE_CONTROL_POLICY',
            ],
        ],
    ],
]

InviteAccountToOrganization

$result = $client->inviteAccountToOrganization([/* ... */]);
$promise = $client->inviteAccountToOrganizationAsync([/* ... */]);

Sends an invitation to another account to join your organization as a member account. Organizations sends email on your behalf to the email address that is associated with the other account's owner. The invitation is implemented as a Handshake whose details are in the response.

You can invite Amazon Web Services accounts only from the same seller as the management account. For example, if your organization's management account was created by Amazon Internet Services Pvt. Ltd (AISPL), an Amazon Web Services seller in India, you can invite only other AISPL accounts to your organization. You can't combine accounts from AISPL and Amazon Web Services or from any other Amazon Web Services seller. For more information, see Consolidated billing in India.
If you receive an exception that indicates that you exceeded your account limits for the organization or that the operation failed because your organization is still initializing, wait one hour and then try again. If the error persists after an hour, contact Amazon Web Services Support.

If the request includes tags, then the requester must have the organizations:TagResource permission.

This operation can be called only from the organization's management account.

Parameter Syntax

$result = $client->inviteAccountToOrganization([
    'Notes' => '<string>',
    'Tags' => [
        [
            'Key' => '<string>', // REQUIRED
            'Value' => '<string>', // REQUIRED
        ],
        // ...
    ],
    'Target' => [ // REQUIRED
        'Id' => '<string>', // REQUIRED
        'Type' => 'ACCOUNT|ORGANIZATION|EMAIL', // REQUIRED
    ],
]);

Parameter Details

Members

Notes

: Type: string

Additional information that you want to include in the generated email to the recipient account owner.

Tags

: Type: Array of Tag structures

A list of tags that you want to attach to the account when it becomes a member of the organization. For each tag in the list, you must specify both a tag key and a value. You can set the value to an empty string, but you can't set it to null. For more information about tagging, see Tagging Organizations resources in the Organizations User Guide.

Any tags in the request are checked for compliance with any applicable tag policies when the request is made. The request is rejected if the tags in the request don't match the requirements of the policy at that time. Tag policy compliance is not checked again when the invitation is accepted and the tags are actually attached to the account. That means that if the tag policy changes between the invitation and the acceptance, then that tags could potentially be non-compliant.

If any one of the tags is not valid or if you exceed the allowed number of tags for an account, then the entire request fails and invitations are not sent.

Target

: Required: Yes
: Type: HandshakeParty structure

The identifier (ID) of the Amazon Web Services account that you want to invite to join your organization. This is a JSON object that contains the following elements:

{ "Type": "ACCOUNT", "Id": "< account id number >" }

If you use the CLI, you can submit this as a single string, similar to the following example:

--target Id=123456789012,Type=ACCOUNT

If you specify "Type": "ACCOUNT", you must provide the Amazon Web Services account ID number as the Id. If you specify "Type": "EMAIL", you must specify the email address that is associated with the account.

--target Id=diego@example.com,Type=EMAIL

Result Syntax

[
    'Handshake' => [
        'Action' => 'INVITE|ENABLE_ALL_FEATURES|APPROVE_ALL_FEATURES|ADD_ORGANIZATIONS_SERVICE_LINKED_ROLE',
        'Arn' => '<string>',
        'ExpirationTimestamp' => <DateTime>,
        'Id' => '<string>',
        'Parties' => [
            [
                'Id' => '<string>',
                'Type' => 'ACCOUNT|ORGANIZATION|EMAIL',
            ],
            // ...
        ],
        'RequestedTimestamp' => <DateTime>,
        'Resources' => [
            [
                'Resources' => [...], // RECURSIVE
                'Type' => 'ACCOUNT|ORGANIZATION|ORGANIZATION_FEATURE_SET|EMAIL|MASTER_EMAIL|MASTER_NAME|NOTES|PARENT_HANDSHAKE',
                'Value' => '<string>',
            ],
            // ...
        ],
        'State' => 'REQUESTED|OPEN|CANCELED|ACCEPTED|DECLINED|EXPIRED',
    ],
]

Result Details

Members

Handshake

: Type: Handshake structure

A structure that contains details about the handshake that is created to support this invitation request.

Errors

AccountOwnerNotVerifiedException:

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

You can't invite an existing account to your organization until you verify that you own the email address associated with the management account. For more information, see Email address verification in the Organizations User Guide.

HandshakeConstraintViolationException:

The target of the operation is currently being modified by a different request. Try again later.

The requested operation would violate the constraint identified in the reason code.

Some of the reasons in the following list might not be applicable to this specific API or operation:

ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. Note that deleted and closed accounts still count toward your limit.

If you get this exception immediately after creating the organization, wait one hour and try again. If after an hour it continues to fail with this error, contact Amazon Web Services Support.
ALREADY_IN_AN_ORGANIZATION: The handshake request is invalid because the invited account is already a member of an organization.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVITE_DISABLED_DURING_ENABLE_ALL_FEATURES: You can't issue new invitations to join an organization while it's in the process of enabling all features. You can resume inviting accounts after you finalize the process when all accounts have agreed to the change.
ORGANIZATION_ALREADY_HAS_ALL_FEATURES: The handshake request is invalid because the organization has already enabled all features.
ORGANIZATION_IS_ALREADY_PENDING_ALL_FEATURES_MIGRATION: The handshake request is invalid because the organization has already started the process to enable all features.
ORGANIZATION_FROM_DIFFERENT_SELLER_OF_RECORD: The request failed because the account is from a different marketplace than the accounts in the organization. For example, accounts with India addresses must be associated with the AISPL marketplace. All accounts in an organization must be from the same marketplace.
ORGANIZATION_MEMBERSHIP_CHANGE_RATE_LIMIT_EXCEEDED: You attempted to change the membership of an account too quickly after its previous change.
PAYMENT_INSTRUMENT_REQUIRED: You can't complete the operation with an account that doesn't have a payment instrument, such as a credit card, associated with it.

DuplicateHandshakeException:

A handshake with the same action and target already exists. For example, if you invited an account to join your organization, the invited account might already have a pending invitation from this organization. If you intend to resend an invitation to an account, ensure that existing handshakes that might be considered duplicates are canceled or declined.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

FinalizingOrganizationException:

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Examples

Example 1: To invite an account to join an organization

The following example shows the admin of the master account owned by bill@example.com inviting the account owned by juan@example.com to join an organization.

$result = $client->inviteAccountToOrganization([
    'Notes' => 'This is a request for Juan's account to join Bill's organization',
    'Target' => [
        'Id' => 'juan@example.com',
        'Type' => 'EMAIL',
    ],
]);

Result syntax:

[
    'Handshake' => [
        'Action' => 'INVITE',
        'Arn' => 'arn:aws:organizations::111111111111:handshake/o-exampleorgid/invite/h-examplehandshakeid111',
        'ExpirationTimestamp' => ,
        'Id' => 'h-examplehandshakeid111',
        'Parties' => [
            [
                'Id' => 'o-exampleorgid',
                'Type' => 'ORGANIZATION',
            ],
            [
                'Id' => 'juan@example.com',
                'Type' => 'EMAIL',
            ],
        ],
        'RequestedTimestamp' => ,
        'Resources' => [
            [
                'Resources' => [
                    [
                        'Type' => 'MASTER_EMAIL',
                        'Value' => 'bill@amazon.com',
                    ],
                    [
                        'Type' => 'MASTER_NAME',
                        'Value' => 'Org Master Account',
                    ],
                    [
                        'Type' => 'ORGANIZATION_FEATURE_SET',
                        'Value' => 'FULL',
                    ],
                ],
                'Type' => 'ORGANIZATION',
                'Value' => 'o-exampleorgid',
            ],
            [
                'Type' => 'EMAIL',
                'Value' => 'juan@example.com',
            ],
        ],
        'State' => 'OPEN',
    ],
]

LeaveOrganization

$result = $client->leaveOrganization([/* ... */]);
$promise = $client->leaveOrganizationAsync([/* ... */]);

Removes a member account from its parent organization. This version of the operation is performed by the account that wants to leave. To remove a member account as a user in the management account, use RemoveAccountFromOrganization instead.

This operation can be called only from a member account in the organization.

The management account in an organization with all features enabled can set service control policies (SCPs) that can restrict what administrators of member accounts can do. This includes preventing them from successfully calling LeaveOrganization and leaving the organization.
You can leave an organization as a member account only if the account is configured with the information required to operate as a standalone account. When you create an account in an organization using the Organizations console, API, or CLI commands, the information required of standalone accounts is not automatically collected. For each account that you want to make standalone, you must perform the following steps. If any of the steps are already completed for this account, that step doesn't appear.
- Choose a support plan
- Provide and verify the required contact information
- Provide a current payment method
Amazon Web Services uses the payment method to charge for any billable (not free tier) Amazon Web Services activity that occurs while the account isn't attached to an organization. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
The account that you want to leave must not be a delegated administrator account for any Amazon Web Services service enabled for your organization. If the account is a delegated administrator, you must first change the delegated administrator account to another account that is remaining in the organization.
You can leave an organization only after you enable IAM user access to billing in your account. For more information, see About IAM access to the Billing and Cost Management console in the Amazon Web Services Billing and Cost Management User Guide.
After the account leaves the organization, all tags that were attached to the account object in the organization are deleted. Amazon Web Services accounts outside of an organization do not support tags.
A newly created account has a waiting period before it can be removed from its organization. You must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.
If you are using an organization principal to call LeaveOrganization across multiple accounts, you can only do this up to 5 accounts per second in a single organization.

Parameter Syntax

$result = $client->leaveOrganization([
]);

Parameter Details

Members

Result Syntax

[]

Result Details

The results for this operation are always empty.

Errors

We can't find an Amazon Web Services account with the AccountId that you specified, or the account whose credentials you used to make this request isn't a member of an organization.

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

The target of the operation is currently being modified by a different request. Try again later.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

MasterCannotLeaveOrganizationException:

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

You can't remove a management account from an organization. If you want the management account to become a member account in another organization, you must first delete the current organization of the management account.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Examples

Example 1: To leave an organization as a member account

TThe following example shows how to remove your member account from an organization:

$result = $client->leaveOrganization([
]);

ListAWSServiceAccessForOrganization

$result = $client->listAWSServiceAccessForOrganization([/* ... */]);
$promise = $client->listAWSServiceAccessForOrganizationAsync([/* ... */]);

Returns a list of the Amazon Web Services services that you enabled to integrate with your organization. After a service on this list creates the resources that it requires for the integration, it can perform operations on your organization and its accounts.

For more information about integrating other services with Organizations, including the list of services that currently work with Organizations, see Using Organizations with other Amazon Web Services services in the Organizations User Guide.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->listAWSServiceAccessForOrganization([
    'MaxResults' => <integer>,
    'NextToken' => '<string>',
]);

Parameter Details

Members

MaxResults

: Type: int

The total number of results that you want included on each page of the response. If you do not include this parameter, it defaults to a value that is specific to the operation. If additional items exist beyond the maximum you specify, the NextToken response element is present and has a value (is not null). Include that value as the NextToken request parameter in the next call to the operation to get the next part of the results. Note that Organizations might return fewer results than the maximum even when there are more results available. You should check NextToken after every operation to ensure that you receive all of the results.

NextToken

: Type: string

The parameter for receiving additional results if you receive a NextToken response in a previous request. A NextToken response indicates that more output is available. Set this parameter to the value of the previous call's NextToken response to indicate where the output should continue from.

Result Syntax

[
    'EnabledServicePrincipals' => [
        [
            'DateEnabled' => <DateTime>,
            'ServicePrincipal' => '<string>',
        ],
        // ...
    ],
    'NextToken' => '<string>',
]

Result Details

Members

EnabledServicePrincipals

: Type: Array of EnabledServicePrincipal structures

A list of the service principals for the services that are enabled to integrate with your organization. Each principal is a structure that includes the name and the date that it was enabled for integration with Organizations.

NextToken

: Type: string

If present, indicates that more output is available than is included in the current response. Use this value in the NextToken request parameter in a subsequent call to the operation to get the next part of the output. You should repeat this until the NextToken response element comes back as null.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

This action isn't available in the current Amazon Web Services Region.

ListAccounts

$result = $client->listAccounts([/* ... */]);
$promise = $client->listAccountsAsync([/* ... */]);

Lists all the accounts in the organization. To request only the accounts in a specified root or organizational unit (OU), use the ListAccountsForParent operation instead.

Always check the NextToken response parameter for a null value when calling a List* operation. These operations can occasionally return an empty set of results even when there are more results available. The NextToken response parameter value is null only when there are no more results to display.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->listAccounts([
    'MaxResults' => <integer>,
    'NextToken' => '<string>',
]);

Parameter Details

Members

MaxResults

: Type: int

NextToken

: Type: string

Result Syntax

[
    'Accounts' => [
        [
            'Arn' => '<string>',
            'Email' => '<string>',
            'Id' => '<string>',
            'JoinedMethod' => 'INVITED|CREATED',
            'JoinedTimestamp' => <DateTime>,
            'Name' => '<string>',
            'Status' => 'ACTIVE|SUSPENDED|PENDING_CLOSURE',
        ],
        // ...
    ],
    'NextToken' => '<string>',
]

Result Details

Members

Accounts

: Type: Array of Account structures

A list of objects in the organization.

NextToken

: Type: string

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Examples

Example 1: To retrieve a list of all of the accounts in an organization

The following example shows you how to request a list of the accounts in an organization:

$result = $client->listAccounts([
]);

Result syntax:

[
    'Accounts' => [
        [
            'Arn' => 'arn:aws:organizations::111111111111:account/o-exampleorgid/111111111111',
            'Email' => 'bill@example.com',
            'Id' => '111111111111',
            'JoinedMethod' => 'INVITED',
            'JoinedTimestamp' => ,
            'Name' => 'Master Account',
            'Status' => 'ACTIVE',
        ],
        [
            'Arn' => 'arn:aws:organizations::111111111111:account/o-exampleorgid/222222222222',
            'Email' => 'alice@example.com',
            'Id' => '222222222222',
            'JoinedMethod' => 'INVITED',
            'JoinedTimestamp' => ,
            'Name' => 'Developer Account',
            'Status' => 'ACTIVE',
        ],
        [
            'Arn' => 'arn:aws:organizations::111111111111:account/o-exampleorgid/333333333333',
            'Email' => 'juan@example.com',
            'Id' => '333333333333',
            'JoinedMethod' => 'INVITED',
            'JoinedTimestamp' => ,
            'Name' => 'Test Account',
            'Status' => 'ACTIVE',
        ],
        [
            'Arn' => 'arn:aws:organizations::111111111111:account/o-exampleorgid/444444444444',
            'Email' => 'anika@example.com',
            'Id' => '444444444444',
            'JoinedMethod' => 'INVITED',
            'JoinedTimestamp' => ,
            'Name' => 'Production Account',
            'Status' => 'ACTIVE',
        ],
    ],
]

ListAccountsForParent

$result = $client->listAccountsForParent([/* ... */]);
$promise = $client->listAccountsForParentAsync([/* ... */]);

Lists the accounts in an organization that are contained by the specified target root or organizational unit (OU). If you specify the root, you get a list of all the accounts that aren't in any OU. If you specify an OU, you get a list of all the accounts in only that OU and not in any child OUs. To get a list of all accounts in the organization, use the ListAccounts operation.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->listAccountsForParent([
    'MaxResults' => <integer>,
    'NextToken' => '<string>',
    'ParentId' => '<string>', // REQUIRED
]);

Parameter Details

Members

MaxResults

: Type: int

NextToken

: Type: string

ParentId

: Required: Yes
: Type: string

The unique identifier (ID) for the parent root or organization unit (OU) whose accounts you want to list.

Result Syntax

[
    'Accounts' => [
        [
            'Arn' => '<string>',
            'Email' => '<string>',
            'Id' => '<string>',
            'JoinedMethod' => 'INVITED|CREATED',
            'JoinedTimestamp' => <DateTime>,
            'Name' => '<string>',
            'Status' => 'ACTIVE|SUSPENDED|PENDING_CLOSURE',
        ],
        // ...
    ],
    'NextToken' => '<string>',
]

Result Details

Members

Accounts

: Type: Array of Account structures

A list of the accounts in the specified root or OU.

NextToken

: Type: string

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

We can't find a root or OU with the ParentId that you specified.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Examples

Example 1: To retrieve a list of all of the accounts in a root or OU

The following example shows how to request a list of the accounts in an OU:/n/n

$result = $client->listAccountsForParent([
    'ParentId' => 'ou-examplerootid111-exampleouid111',
]);

Result syntax:

[
    'Accounts' => [
        [
            'Arn' => 'arn:aws:organizations::111111111111:account/o-exampleorgid/333333333333',
            'Email' => 'juan@example.com',
            'Id' => '333333333333',
            'JoinedMethod' => 'INVITED',
            'JoinedTimestamp' => ,
            'Name' => 'Development Account',
            'Status' => 'ACTIVE',
        ],
        [
            'Arn' => 'arn:aws:organizations::111111111111:account/o-exampleorgid/444444444444',
            'Email' => 'anika@example.com',
            'Id' => '444444444444',
            'JoinedMethod' => 'INVITED',
            'JoinedTimestamp' => ,
            'Name' => 'Test Account',
            'Status' => 'ACTIVE',
        ],
    ],
]

ListChildren

$result = $client->listChildren([/* ... */]);
$promise = $client->listChildrenAsync([/* ... */]);

Lists all of the organizational units (OUs) or accounts that are contained in the specified parent OU or root. This operation, along with ListParents enables you to traverse the tree structure that makes up this root.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->listChildren([
    'ChildType' => 'ACCOUNT|ORGANIZATIONAL_UNIT', // REQUIRED
    'MaxResults' => <integer>,
    'NextToken' => '<string>',
    'ParentId' => '<string>', // REQUIRED
]);

Parameter Details

Members

ChildType

: Required: Yes
: Type: string

Filters the output to include only the specified child type.

MaxResults

: Type: int

NextToken

: Type: string

ParentId

: Required: Yes
: Type: string

The unique identifier (ID) for the parent root or OU whose children you want to list.

The regex pattern for a parent ID string requires one of the following:

Root - A string that begins with "r-" followed by from 4 to 32 lowercase letters or digits.
Organizational unit (OU) - A string that begins with "ou-" followed by from 4 to 32 lowercase letters or digits (the ID of the root that the OU is in). This string is followed by a second "-" dash and from 8 to 32 additional lowercase letters or digits.

Result Syntax

[
    'Children' => [
        [
            'Id' => '<string>',
            'Type' => 'ACCOUNT|ORGANIZATIONAL_UNIT',
        ],
        // ...
    ],
    'NextToken' => '<string>',
]

Result Details

Members

Children

: Type: Array of Child structures

The list of children of the specified parent container.

NextToken

: Type: string

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

We can't find a root or OU with the ParentId that you specified.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Examples

Example 1: To retrieve a list of all of the child accounts and OUs in a parent root or OU

The following example shows how to request a list of the child OUs in a parent root or OU:/n/n

$result = $client->listChildren([
    'ChildType' => 'ORGANIZATIONAL_UNIT',
    'ParentId' => 'ou-examplerootid111-exampleouid111',
]);

Result syntax:

[
    'Children' => [
        [
            'Id' => 'ou-examplerootid111-exampleouid111',
            'Type' => 'ORGANIZATIONAL_UNIT',
        ],
        [
            'Id' => 'ou-examplerootid111-exampleouid222',
            'Type' => 'ORGANIZATIONAL_UNIT',
        ],
    ],
]

ListCreateAccountStatus

$result = $client->listCreateAccountStatus([/* ... */]);
$promise = $client->listCreateAccountStatusAsync([/* ... */]);

Lists the account creation requests that match the specified status that is currently being tracked for the organization.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->listCreateAccountStatus([
    'MaxResults' => <integer>,
    'NextToken' => '<string>',
    'States' => ['<string>', ...],
]);

Parameter Details

Members

MaxResults

: Type: int

NextToken

: Type: string

States

: Type: Array of strings

A list of one or more states that you want included in the response. If this parameter isn't present, all requests are included in the response.

Result Syntax

[
    'CreateAccountStatuses' => [
        [
            'AccountId' => '<string>',
            'AccountName' => '<string>',
            'CompletedTimestamp' => <DateTime>,
            'FailureReason' => 'ACCOUNT_LIMIT_EXCEEDED|EMAIL_ALREADY_EXISTS|INVALID_ADDRESS|INVALID_EMAIL|CONCURRENT_ACCOUNT_MODIFICATION|INTERNAL_FAILURE|GOVCLOUD_ACCOUNT_ALREADY_EXISTS|MISSING_BUSINESS_VALIDATION|FAILED_BUSINESS_VALIDATION|PENDING_BUSINESS_VALIDATION|INVALID_IDENTITY_FOR_BUSINESS_VALIDATION|UNKNOWN_BUSINESS_VALIDATION|MISSING_PAYMENT_INSTRUMENT|INVALID_PAYMENT_INSTRUMENT|UPDATE_EXISTING_RESOURCE_POLICY_WITH_TAGS_NOT_SUPPORTED',
            'GovCloudAccountId' => '<string>',
            'Id' => '<string>',
            'RequestedTimestamp' => <DateTime>,
            'State' => 'IN_PROGRESS|SUCCEEDED|FAILED',
        ],
        // ...
    ],
    'NextToken' => '<string>',
]

Result Details

Members

CreateAccountStatuses

: Type: Array of CreateAccountStatus structures

A list of objects with details about the requests. Certain elements, such as the accountId number, are present in the output only after the account has been successfully created.

NextToken

: Type: string

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

This action isn't available in the current Amazon Web Services Region.

Examples

Example 1: To get a list of completed account creation requests made in the organization

The following example shows a user requesting a list of only the completed account creation requests made for the current organization:

$result = $client->listCreateAccountStatus([
    'States' => [
        'SUCCEEDED',
    ],
]);

Result syntax:

[
    'CreateAccountStatuses' => [
        [
            'AccountId' => '444444444444',
            'AccountName' => 'Developer Test Account',
            'CompletedTimestamp' => ,
            'Id' => 'car-exampleaccountcreationrequestid1',
            'RequestedTimestamp' => ,
            'State' => 'SUCCEEDED',
        ],
    ],
]

Example 2: To get a list of all account creation requests made in the organization

The following example shows a user requesting a list of only the in-progress account creation requests made for the current organization:

$result = $client->listCreateAccountStatus([
    'States' => [
        'IN_PROGRESS',
    ],
]);

Result syntax:

[
    'CreateAccountStatuses' => [
        [
            'AccountName' => 'Production Account',
            'Id' => 'car-exampleaccountcreationrequestid2',
            'RequestedTimestamp' => ,
            'State' => 'IN_PROGRESS',
        ],
    ],
]

ListDelegatedAdministrators

$result = $client->listDelegatedAdministrators([/* ... */]);
$promise = $client->listDelegatedAdministratorsAsync([/* ... */]);

Lists the Amazon Web Services accounts that are designated as delegated administrators in this organization.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->listDelegatedAdministrators([
    'MaxResults' => <integer>,
    'NextToken' => '<string>',
    'ServicePrincipal' => '<string>',
]);

Parameter Details

Members

MaxResults

: Type: int

NextToken

: Type: string

ServicePrincipal

: Type: string

Specifies a service principal name. If specified, then the operation lists the delegated administrators only for the specified service.

If you don't specify a service principal, the operation lists all delegated administrators for all services in your organization.

Result Syntax

[
    'DelegatedAdministrators' => [
        [
            'Arn' => '<string>',
            'DelegationEnabledDate' => <DateTime>,
            'Email' => '<string>',
            'Id' => '<string>',
            'JoinedMethod' => 'INVITED|CREATED',
            'JoinedTimestamp' => <DateTime>,
            'Name' => '<string>',
            'Status' => 'ACTIVE|SUSPENDED|PENDING_CLOSURE',
        ],
        // ...
    ],
    'NextToken' => '<string>',
]

Result Details

Members

DelegatedAdministrators

: Type: Array of DelegatedAdministrator structures

The list of delegated administrators in your organization.

NextToken

: Type: string

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Organizations can't complete your request because of an internal service error. Try again later.

This action isn't available in the current Amazon Web Services Region.

ListDelegatedServicesForAccount

$result = $client->listDelegatedServicesForAccount([/* ... */]);
$promise = $client->listDelegatedServicesForAccountAsync([/* ... */]);

List the Amazon Web Services services for which the specified account is a delegated administrator.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->listDelegatedServicesForAccount([
    'AccountId' => '<string>', // REQUIRED
    'MaxResults' => <integer>,
    'NextToken' => '<string>',
]);

Parameter Details

Members

AccountId

: Required: Yes
: Type: string

The account ID number of a delegated administrator account in the organization.

MaxResults

: Type: int

NextToken

: Type: string

Result Syntax

[
    'DelegatedServices' => [
        [
            'DelegationEnabledDate' => <DateTime>,
            'ServicePrincipal' => '<string>',
        ],
        // ...
    ],
    'NextToken' => '<string>',
]

Result Details

Members

DelegatedServices

: Type: Array of DelegatedService structures

The services for which the account is a delegated administrator.

NextToken

: Type: string

Errors

AccountNotRegisteredException:

We can't find an Amazon Web Services account with the AccountId that you specified, or the account whose credentials you used to make this request isn't a member of an organization.

The specified account is not a delegated administrator for this Amazon Web Services service.

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Organizations can't complete your request because of an internal service error. Try again later.

This action isn't available in the current Amazon Web Services Region.

ListHandshakesForAccount

$result = $client->listHandshakesForAccount([/* ... */]);
$promise = $client->listHandshakesForAccountAsync([/* ... */]);

Lists the current handshakes that are associated with the account of the requesting user.

Handshakes that are ACCEPTED, DECLINED, CANCELED, or EXPIRED appear in the results of this API for only 30 days after changing to that state. After that, they're deleted and no longer accessible.

This operation can be called from any account in the organization.

Parameter Syntax

$result = $client->listHandshakesForAccount([
    'Filter' => [
        'ActionType' => 'INVITE|ENABLE_ALL_FEATURES|APPROVE_ALL_FEATURES|ADD_ORGANIZATIONS_SERVICE_LINKED_ROLE',
        'ParentHandshakeId' => '<string>',
    ],
    'MaxResults' => <integer>,
    'NextToken' => '<string>',
]);

Parameter Details

Members

Filter

: Type: HandshakeFilter structure

Filters the handshakes that you want included in the response. The default is all types. Use the ActionType element to limit the output to only a specified type, such as INVITE, ENABLE_ALL_FEATURES, or APPROVE_ALL_FEATURES. Alternatively, for the ENABLE_ALL_FEATURES handshake that generates a separate child handshake for each member account, you can specify ParentHandshakeId to see only the handshakes that were generated by that parent request.

MaxResults

: Type: int

NextToken

: Type: string

Result Syntax

[
    'Handshakes' => [
        [
            'Action' => 'INVITE|ENABLE_ALL_FEATURES|APPROVE_ALL_FEATURES|ADD_ORGANIZATIONS_SERVICE_LINKED_ROLE',
            'Arn' => '<string>',
            'ExpirationTimestamp' => <DateTime>,
            'Id' => '<string>',
            'Parties' => [
                [
                    'Id' => '<string>',
                    'Type' => 'ACCOUNT|ORGANIZATION|EMAIL',
                ],
                // ...
            ],
            'RequestedTimestamp' => <DateTime>,
            'Resources' => [
                [
                    'Resources' => [...], // RECURSIVE
                    'Type' => 'ACCOUNT|ORGANIZATION|ORGANIZATION_FEATURE_SET|EMAIL|MASTER_EMAIL|MASTER_NAME|NOTES|PARENT_HANDSHAKE',
                    'Value' => '<string>',
                ],
                // ...
            ],
            'State' => 'REQUESTED|OPEN|CANCELED|ACCEPTED|DECLINED|EXPIRED',
        ],
        // ...
    ],
    'NextToken' => '<string>',
]

Result Details

Members

Handshakes

: Type: Array of Handshake structures

A list of Handshake objects with details about each of the handshakes that is associated with the specified account.

NextToken

: Type: string

Errors

The target of the operation is currently being modified by a different request. Try again later.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Examples

Example 1: To retrieve a list of the handshakes sent to an account

The following example shows you how to get a list of handshakes that are associated with the account of the credentials used to call the operation:

$result = $client->listHandshakesForAccount([
]);

Result syntax:

[
    'Handshakes' => [
        [
            'Action' => 'INVITE',
            'Arn' => 'arn:aws:organizations::111111111111:handshake/o-exampleorgid/invite/h-examplehandshakeid111',
            'ExpirationTimestamp' => ,
            'Id' => 'h-examplehandshakeid111',
            'Parties' => [
                [
                    'Id' => 'o-exampleorgid',
                    'Type' => 'ORGANIZATION',
                ],
                [
                    'Id' => 'juan@example.com',
                    'Type' => 'EMAIL',
                ],
            ],
            'RequestedTimestamp' => ,
            'Resources' => [
                [
                    'Resources' => [
                        [
                            'Type' => 'MASTER_EMAIL',
                            'Value' => 'bill@amazon.com',
                        ],
                        [
                            'Type' => 'MASTER_NAME',
                            'Value' => 'Org Master Account',
                        ],
                        [
                            'Type' => 'ORGANIZATION_FEATURE_SET',
                            'Value' => 'FULL',
                        ],
                    ],
                    'Type' => 'ORGANIZATION',
                    'Value' => 'o-exampleorgid',
                ],
                [
                    'Type' => 'EMAIL',
                    'Value' => 'juan@example.com',
                ],
            ],
            'State' => 'OPEN',
        ],
    ],
]

ListHandshakesForOrganization

$result = $client->listHandshakesForOrganization([/* ... */]);
$promise = $client->listHandshakesForOrganizationAsync([/* ... */]);

Lists the handshakes that are associated with the organization that the requesting user is part of. The ListHandshakesForOrganization operation returns a list of handshake structures. Each structure contains details and status about a handshake.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->listHandshakesForOrganization([
    'Filter' => [
        'ActionType' => 'INVITE|ENABLE_ALL_FEATURES|APPROVE_ALL_FEATURES|ADD_ORGANIZATIONS_SERVICE_LINKED_ROLE',
        'ParentHandshakeId' => '<string>',
    ],
    'MaxResults' => <integer>,
    'NextToken' => '<string>',
]);

Parameter Details

Members

Filter

: Type: HandshakeFilter structure

A filter of the handshakes that you want included in the response. The default is all types. Use the ActionType element to limit the output to only a specified type, such as INVITE, ENABLE-ALL-FEATURES, or APPROVE-ALL-FEATURES. Alternatively, for the ENABLE-ALL-FEATURES handshake that generates a separate child handshake for each member account, you can specify the ParentHandshakeId to see only the handshakes that were generated by that parent request.

MaxResults

: Type: int

NextToken

: Type: string

Result Syntax

[
    'Handshakes' => [
        [
            'Action' => 'INVITE|ENABLE_ALL_FEATURES|APPROVE_ALL_FEATURES|ADD_ORGANIZATIONS_SERVICE_LINKED_ROLE',
            'Arn' => '<string>',
            'ExpirationTimestamp' => <DateTime>,
            'Id' => '<string>',
            'Parties' => [
                [
                    'Id' => '<string>',
                    'Type' => 'ACCOUNT|ORGANIZATION|EMAIL',
                ],
                // ...
            ],
            'RequestedTimestamp' => <DateTime>,
            'Resources' => [
                [
                    'Resources' => [...], // RECURSIVE
                    'Type' => 'ACCOUNT|ORGANIZATION|ORGANIZATION_FEATURE_SET|EMAIL|MASTER_EMAIL|MASTER_NAME|NOTES|PARENT_HANDSHAKE',
                    'Value' => '<string>',
                ],
                // ...
            ],
            'State' => 'REQUESTED|OPEN|CANCELED|ACCEPTED|DECLINED|EXPIRED',
        ],
        // ...
    ],
    'NextToken' => '<string>',
]

Result Details

Members

Handshakes

: Type: Array of Handshake structures

A list of Handshake objects with details about each of the handshakes that are associated with an organization.

NextToken

: Type: string

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

The target of the operation is currently being modified by a different request. Try again later.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Examples

Example 1: To retrieve a list of the handshakes associated with an organization

The following example shows you how to get a list of handshakes associated with the current organization:

$result = $client->listHandshakesForOrganization([
]);

Result syntax:

[
    'Handshakes' => [
        [
            'Action' => 'INVITE',
            'Arn' => 'arn:aws:organizations::111111111111:handshake/o-exampleorgid/invite/h-examplehandshakeid111',
            'ExpirationTimestamp' => ,
            'Id' => 'h-examplehandshakeid111',
            'Parties' => [
                [
                    'Id' => 'o-exampleorgid',
                    'Type' => 'ORGANIZATION',
                ],
                [
                    'Id' => 'juan@example.com',
                    'Type' => 'EMAIL',
                ],
            ],
            'RequestedTimestamp' => ,
            'Resources' => [
                [
                    'Resources' => [
                        [
                            'Type' => 'MASTER_EMAIL',
                            'Value' => 'bill@amazon.com',
                        ],
                        [
                            'Type' => 'MASTER_NAME',
                            'Value' => 'Org Master Account',
                        ],
                        [
                            'Type' => 'ORGANIZATION_FEATURE_SET',
                            'Value' => 'FULL',
                        ],
                    ],
                    'Type' => 'ORGANIZATION',
                    'Value' => 'o-exampleorgid',
                ],
                [
                    'Type' => 'EMAIL',
                    'Value' => 'juan@example.com',
                ],
            ],
            'State' => 'OPEN',
        ],
        [
            'Action' => 'INVITE',
            'Arn' => 'arn:aws:organizations::111111111111:handshake/o-exampleorgid/invite/h-examplehandshakeid111',
            'ExpirationTimestamp' => ,
            'Id' => 'h-examplehandshakeid222',
            'Parties' => [
                [
                    'Id' => 'o-exampleorgid',
                    'Type' => 'ORGANIZATION',
                ],
                [
                    'Id' => 'anika@example.com',
                    'Type' => 'EMAIL',
                ],
            ],
            'RequestedTimestamp' => ,
            'Resources' => [
                [
                    'Resources' => [
                        [
                            'Type' => 'MASTER_EMAIL',
                            'Value' => 'bill@example.com',
                        ],
                        [
                            'Type' => 'MASTER_NAME',
                            'Value' => 'Master Account',
                        ],
                    ],
                    'Type' => 'ORGANIZATION',
                    'Value' => 'o-exampleorgid',
                ],
                [
                    'Type' => 'EMAIL',
                    'Value' => 'anika@example.com',
                ],
                [
                    'Type' => 'NOTES',
                    'Value' => 'This is an invitation to Anika's account to join Bill's organization.',
                ],
            ],
            'State' => 'ACCEPTED',
        ],
    ],
]

ListOrganizationalUnitsForParent

$result = $client->listOrganizationalUnitsForParent([/* ... */]);
$promise = $client->listOrganizationalUnitsForParentAsync([/* ... */]);

Lists the organizational units (OUs) in a parent organizational unit or root.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->listOrganizationalUnitsForParent([
    'MaxResults' => <integer>,
    'NextToken' => '<string>',
    'ParentId' => '<string>', // REQUIRED
]);

Parameter Details

Members

MaxResults

: Type: int

NextToken

: Type: string

ParentId

: Required: Yes
: Type: string

The unique identifier (ID) of the root or OU whose child OUs you want to list.

The regex pattern for a parent ID string requires one of the following:

Root - A string that begins with "r-" followed by from 4 to 32 lowercase letters or digits.
Organizational unit (OU) - A string that begins with "ou-" followed by from 4 to 32 lowercase letters or digits (the ID of the root that the OU is in). This string is followed by a second "-" dash and from 8 to 32 additional lowercase letters or digits.

Result Syntax

[
    'NextToken' => '<string>',
    'OrganizationalUnits' => [
        [
            'Arn' => '<string>',
            'Id' => '<string>',
            'Name' => '<string>',
        ],
        // ...
    ],
]

Result Details

Members

NextToken

: Type: string

OrganizationalUnits

: Type: Array of OrganizationalUnit structures

A list of the OUs in the specified root or parent OU.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

We can't find a root or OU with the ParentId that you specified.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Examples

Example 1: To retrieve a list of all of the child OUs in a parent root or OU

The following example shows how to get a list of OUs in a specified root:/n/n

$result = $client->listOrganizationalUnitsForParent([
    'ParentId' => 'r-examplerootid111',
]);

Result syntax:

[
    'OrganizationalUnits' => [
        [
            'Arn' => 'arn:aws:organizations::111111111111:ou/o-exampleorgid/ou-examlerootid111-exampleouid111',
            'Id' => 'ou-examplerootid111-exampleouid111',
            'Name' => 'Development',
        ],
        [
            'Arn' => 'arn:aws:organizations::111111111111:ou/o-exampleorgid/ou-examlerootid111-exampleouid222',
            'Id' => 'ou-examplerootid111-exampleouid222',
            'Name' => 'Production',
        ],
    ],
]

ListParents

$result = $client->listParents([/* ... */]);
$promise = $client->listParentsAsync([/* ... */]);

Lists the root or organizational units (OUs) that serve as the immediate parent of the specified child OU or account. This operation, along with ListChildren enables you to traverse the tree structure that makes up this root.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

In the current release, a child can have only a single parent.

Parameter Syntax

$result = $client->listParents([
    'ChildId' => '<string>', // REQUIRED
    'MaxResults' => <integer>,
    'NextToken' => '<string>',
]);

Parameter Details

Members

ChildId

: Required: Yes
: Type: string

The unique identifier (ID) of the OU or account whose parent containers you want to list. Don't specify a root.

The regex pattern for a child ID string requires one of the following:

Account - A string that consists of exactly 12 digits.
Organizational unit (OU) - A string that begins with "ou-" followed by from 4 to 32 lowercase letters or digits (the ID of the root that contains the OU). This string is followed by a second "-" dash and from 8 to 32 additional lowercase letters or digits.

MaxResults

: Type: int

NextToken

: Type: string

Result Syntax

[
    'NextToken' => '<string>',
    'Parents' => [
        [
            'Id' => '<string>',
            'Type' => 'ROOT|ORGANIZATIONAL_UNIT',
        ],
        // ...
    ],
]

Result Details

Members

NextToken

: Type: string

Parents

: Type: Array of Parent structures

A list of parents for the specified child account or OU.

Errors

ChildNotFoundException:

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

We can't find an organizational unit (OU) or Amazon Web Services account with the ChildId that you specified.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Examples

Example 1: To retrieve a list of all of the parents of a child OU or account

The following example shows how to list the root or OUs that contain account 444444444444:/n/n

$result = $client->listParents([
    'ChildId' => '444444444444',
]);

Result syntax:

[
    'Parents' => [
        [
            'Id' => 'ou-examplerootid111-exampleouid111',
            'Type' => 'ORGANIZATIONAL_UNIT',
        ],
    ],
]

ListPolicies

$result = $client->listPolicies([/* ... */]);
$promise = $client->listPoliciesAsync([/* ... */]);

Retrieves the list of all policies in an organization of a specified type.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->listPolicies([
    'Filter' => 'SERVICE_CONTROL_POLICY|RESOURCE_CONTROL_POLICY|TAG_POLICY|BACKUP_POLICY|AISERVICES_OPT_OUT_POLICY|CHATBOT_POLICY|DECLARATIVE_POLICY_EC2', // REQUIRED
    'MaxResults' => <integer>,
    'NextToken' => '<string>',
]);

Parameter Details

Members

Filter

: Required: Yes
: Type: string

Specifies the type of policy that you want to include in the response. You must specify one of the following values:

MaxResults

: Type: int

NextToken

: Type: string

Result Syntax

[
    'NextToken' => '<string>',
    'Policies' => [
        [
            'Arn' => '<string>',
            'AwsManaged' => true || false,
            'Description' => '<string>',
            'Id' => '<string>',
            'Name' => '<string>',
            'Type' => 'SERVICE_CONTROL_POLICY|RESOURCE_CONTROL_POLICY|TAG_POLICY|BACKUP_POLICY|AISERVICES_OPT_OUT_POLICY|CHATBOT_POLICY|DECLARATIVE_POLICY_EC2',
        ],
        // ...
    ],
]

Result Details

Members

NextToken

: Type: string

Policies

: Type: Array of PolicySummary structures

A list of policies that match the filter criteria in the request. The output list doesn't include the policy contents. To see the content for a policy, see DescribePolicy.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

This action isn't available in the current Amazon Web Services Region.

Examples

Example 1: To retrieve a list policies in the organization

The following example shows how to get a list of service control policies (SCPs):/n/n

$result = $client->listPolicies([
    'Filter' => 'SERVICE_CONTROL_POLICY',
]);

Result syntax:

[
    'Policies' => [
        [
            'Arn' => 'arn:aws:organizations::111111111111:policy/o-exampleorgid/service_control_policy/p-examplepolicyid111',
            'AwsManaged' => ,
            'Description' => 'Enables account admins to delegate permissions for any S3 actions to users and roles in their accounts.',
            'Id' => 'p-examplepolicyid111',
            'Name' => 'AllowAllS3Actions',
            'Type' => 'SERVICE_CONTROL_POLICY',
        ],
        [
            'Arn' => 'arn:aws:organizations::111111111111:policy/o-exampleorgid/service_control_policy/p-examplepolicyid222',
            'AwsManaged' => ,
            'Description' => 'Enables account admins to delegate permissions for any EC2 actions to users and roles in their accounts.',
            'Id' => 'p-examplepolicyid222',
            'Name' => 'AllowAllEC2Actions',
            'Type' => 'SERVICE_CONTROL_POLICY',
        ],
        [
            'Arn' => 'arn:aws:organizations::aws:policy/service_control_policy/p-FullAWSAccess',
            'AwsManaged' => 1,
            'Description' => 'Allows access to every operation',
            'Id' => 'p-FullAWSAccess',
            'Name' => 'FullAWSAccess',
            'Type' => 'SERVICE_CONTROL_POLICY',
        ],
    ],
]

ListPoliciesForTarget

$result = $client->listPoliciesForTarget([/* ... */]);
$promise = $client->listPoliciesForTargetAsync([/* ... */]);

Lists the policies that are directly attached to the specified target root, organizational unit (OU), or account. You must specify the policy type that you want included in the returned list.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->listPoliciesForTarget([
    'Filter' => 'SERVICE_CONTROL_POLICY|RESOURCE_CONTROL_POLICY|TAG_POLICY|BACKUP_POLICY|AISERVICES_OPT_OUT_POLICY|CHATBOT_POLICY|DECLARATIVE_POLICY_EC2', // REQUIRED
    'MaxResults' => <integer>,
    'NextToken' => '<string>',
    'TargetId' => '<string>', // REQUIRED
]);

Parameter Details

Members

Filter

: Required: Yes
: Type: string

The type of policy that you want to include in the returned list. You must specify one of the following values:

MaxResults

: Type: int

NextToken

: Type: string

TargetId

: Required: Yes
: Type: string

The unique identifier (ID) of the root, organizational unit, or account whose policies you want to list.

The regex pattern for a target ID string requires one of the following:

Root - A string that begins with "r-" followed by from 4 to 32 lowercase letters or digits.
Account - A string that consists of exactly 12 digits.
Organizational unit (OU) - A string that begins with "ou-" followed by from 4 to 32 lowercase letters or digits (the ID of the root that the OU is in). This string is followed by a second "-" dash and from 8 to 32 additional lowercase letters or digits.

Result Syntax

[
    'NextToken' => '<string>',
    'Policies' => [
        [
            'Arn' => '<string>',
            'AwsManaged' => true || false,
            'Description' => '<string>',
            'Id' => '<string>',
            'Name' => '<string>',
            'Type' => 'SERVICE_CONTROL_POLICY|RESOURCE_CONTROL_POLICY|TAG_POLICY|BACKUP_POLICY|AISERVICES_OPT_OUT_POLICY|CHATBOT_POLICY|DECLARATIVE_POLICY_EC2',
        ],
        // ...
    ],
]

Result Details

Members

NextToken

: Type: string

Policies

: Type: Array of PolicySummary structures

The list of policies that match the criteria in the request.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

We can't find a root, OU, account, or policy with the TargetId that you specified.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

This action isn't available in the current Amazon Web Services Region.

Examples

Example 1: To retrieve a list policies attached to a root, OU, or account

The following example shows how to get a list of all service control policies (SCPs) of the type specified by the Filter parameter, that are directly attached to an account. The returned list does not include policies that apply to the account because of inheritance from its location in an OU hierarchy:/n/n

$result = $client->listPoliciesForTarget([
    'Filter' => 'SERVICE_CONTROL_POLICY',
    'TargetId' => '444444444444',
]);

Result syntax:

[
    'Policies' => [
        [
            'Arn' => 'arn:aws:organizations::111111111111:policy/o-exampleorgid/service_control_policy/p-examplepolicyid222',
            'AwsManaged' => ,
            'Description' => 'Enables account admins to delegate permissions for any EC2 actions to users and roles in their accounts.',
            'Id' => 'p-examplepolicyid222',
            'Name' => 'AllowAllEC2Actions',
            'Type' => 'SERVICE_CONTROL_POLICY',
        ],
    ],
]

ListRoots

$result = $client->listRoots([/* ... */]);
$promise = $client->listRootsAsync([/* ... */]);

Lists the roots that are defined in the current organization.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Policy types can be enabled and disabled in roots. This is distinct from whether they're available in the organization. When you enable all features, you make policy types available for use in that organization. Individual policy types can then be enabled and disabled in a root. To see the availability of a policy type in an organization, use DescribeOrganization.

Parameter Syntax

$result = $client->listRoots([
    'MaxResults' => <integer>,
    'NextToken' => '<string>',
]);

Parameter Details

Members

MaxResults

: Type: int

NextToken

: Type: string

Result Syntax

[
    'NextToken' => '<string>',
    'Roots' => [
        [
            'Arn' => '<string>',
            'Id' => '<string>',
            'Name' => '<string>',
            'PolicyTypes' => [
                [
                    'Status' => 'ENABLED|PENDING_ENABLE|PENDING_DISABLE',
                    'Type' => 'SERVICE_CONTROL_POLICY|RESOURCE_CONTROL_POLICY|TAG_POLICY|BACKUP_POLICY|AISERVICES_OPT_OUT_POLICY|CHATBOT_POLICY|DECLARATIVE_POLICY_EC2',
                ],
                // ...
            ],
        ],
        // ...
    ],
]

Result Details

Members

NextToken

: Type: string

Roots

: Type: Array of Root structures

A list of roots that are defined in an organization.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Examples

Example 1: To retrieve a list of roots in the organization

The following example shows how to get the list of the roots in the current organization:/n/n

$result = $client->listRoots([
]);

Result syntax:

[
    'Roots' => [
        [
            'Arn' => 'arn:aws:organizations::111111111111:root/o-exampleorgid/r-examplerootid111',
            'Id' => 'r-examplerootid111',
            'Name' => 'Root',
            'PolicyTypes' => [
                [
                    'Status' => 'ENABLED',
                    'Type' => 'SERVICE_CONTROL_POLICY',
                ],
            ],
        ],
    ],
]

ListTagsForResource

$result = $client->listTagsForResource([/* ... */]);
$promise = $client->listTagsForResourceAsync([/* ... */]);

Lists tags that are attached to the specified resource.

You can attach tags to the following resources in Organizations.

Amazon Web Services account
Organization root
Organizational unit (OU)
Policy (any type)

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->listTagsForResource([
    'NextToken' => '<string>',
    'ResourceId' => '<string>', // REQUIRED
]);

Parameter Details

Members

NextToken

: Type: string

ResourceId

: Required: Yes
: Type: string

The ID of the resource with the tags to list.

You can specify any of the following taggable resources.

Amazon Web Services account – specify the account ID number.
Organizational unit – specify the OU ID that begins with ou- and looks similar to: ou-1a2b-34uvwxyz
Root – specify the root ID that begins with r- and looks similar to: r-1a2b
Policy – specify the policy ID that begins with p- andlooks similar to: p-12abcdefg3

Result Syntax

[
    'NextToken' => '<string>',
    'Tags' => [
        [
            'Key' => '<string>',
            'Value' => '<string>',
        ],
        // ...
    ],
]

Result Details

Members

NextToken

: Type: string

Tags

: Type: Array of Tag structures

The tags that are assigned to the resource.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

We can't find a root, OU, account, or policy with the TargetId that you specified.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

ListTargetsForPolicy

$result = $client->listTargetsForPolicy([/* ... */]);
$promise = $client->listTargetsForPolicyAsync([/* ... */]);

Lists all the roots, organizational units (OUs), and accounts that the specified policy is attached to.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->listTargetsForPolicy([
    'MaxResults' => <integer>,
    'NextToken' => '<string>',
    'PolicyId' => '<string>', // REQUIRED
]);

Parameter Details

Members

MaxResults

: Type: int

NextToken

: Type: string

PolicyId

: Required: Yes
: Type: string

The unique identifier (ID) of the policy whose attachments you want to know.

The regex pattern for a policy ID string requires "p-" followed by from 8 to 128 lowercase or uppercase letters, digits, or the underscore character (_).

Result Syntax

[
    'NextToken' => '<string>',
    'Targets' => [
        [
            'Arn' => '<string>',
            'Name' => '<string>',
            'TargetId' => '<string>',
            'Type' => 'ACCOUNT|ORGANIZATIONAL_UNIT|ROOT',
        ],
        // ...
    ],
]

Result Details

Members

NextToken

: Type: string

Targets

: Type: Array of PolicyTargetSummary structures

A list of structures, each of which contains details about one of the entities to which the specified policy is attached.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

We can't find a policy with the PolicyId that you specified.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

This action isn't available in the current Amazon Web Services Region.

Examples

Example 1: To retrieve a list of roots, OUs, and accounts to which a policy is attached

The following example shows how to get the list of roots, OUs, and accounts to which the specified policy is attached:/n/n

$result = $client->listTargetsForPolicy([
    'PolicyId' => 'p-FullAWSAccess',
]);

Result syntax:

[
    'Targets' => [
        [
            'Arn' => 'arn:aws:organizations::111111111111:root/o-exampleorgid/r-examplerootid111',
            'Name' => 'Root',
            'TargetId' => 'r-examplerootid111',
            'Type' => 'ROOT',
        ],
        [
            'Arn' => 'arn:aws:organizations::111111111111:account/o-exampleorgid/333333333333;',
            'Name' => 'Developer Test Account',
            'TargetId' => '333333333333',
            'Type' => 'ACCOUNT',
        ],
        [
            'Arn' => 'arn:aws:organizations::111111111111:ou/o-exampleorgid/ou-examplerootid111-exampleouid111',
            'Name' => 'Accounting',
            'TargetId' => 'ou-examplerootid111-exampleouid111',
            'Type' => 'ORGANIZATIONAL_UNIT',
        ],
    ],
]

MoveAccount

$result = $client->moveAccount([/* ... */]);
$promise = $client->moveAccountAsync([/* ... */]);

Moves an account from its current source parent root or organizational unit (OU) to the specified destination parent root or OU.

This operation can be called only from the organization's management account.

Parameter Syntax

$result = $client->moveAccount([
    'AccountId' => '<string>', // REQUIRED
    'DestinationParentId' => '<string>', // REQUIRED
    'SourceParentId' => '<string>', // REQUIRED
]);

Parameter Details

Members

AccountId

: Required: Yes
: Type: string

The unique identifier (ID) of the account that you want to move.

The regex pattern for an account ID string requires exactly 12 digits.

DestinationParentId

: Required: Yes
: Type: string

The unique identifier (ID) of the root or organizational unit that you want to move the account to.

The regex pattern for a parent ID string requires one of the following:

Root - A string that begins with "r-" followed by from 4 to 32 lowercase letters or digits.
Organizational unit (OU) - A string that begins with "ou-" followed by from 4 to 32 lowercase letters or digits (the ID of the root that the OU is in). This string is followed by a second "-" dash and from 8 to 32 additional lowercase letters or digits.

SourceParentId

: Required: Yes
: Type: string

The unique identifier (ID) of the root or organizational unit that you want to move the account from.

The regex pattern for a parent ID string requires one of the following:

Root - A string that begins with "r-" followed by from 4 to 32 lowercase letters or digits.
Organizational unit (OU) - A string that begins with "ou-" followed by from 4 to 32 lowercase letters or digits (the ID of the root that the OU is in). This string is followed by a second "-" dash and from 8 to 32 additional lowercase letters or digits.

Result Syntax

[]

Result Details

The results for this operation are always empty.

Errors

SourceParentNotFoundException:

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

We can't find a source root or OU with the ParentId that you specified.

DestinationParentNotFoundException:

We can't find the destination container (a root or OU) with the ParentId that you specified.

DuplicateAccountException:

That account is already present in the specified destination.

We can't find an Amazon Web Services account with the AccountId that you specified, or the account whose credentials you used to make this request isn't a member of an organization.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

The target of the operation is currently being modified by a different request. Try again later.

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

Organizations can't complete your request because of an internal service error. Try again later.

Examples

Example 1: To move an OU or account to another OU or the root

The following example shows how to move a member account from the root to an OU:/n/n

$result = $client->moveAccount([
    'AccountId' => '333333333333',
    'DestinationParentId' => 'ou-examplerootid111-exampleouid111',
    'SourceParentId' => 'r-examplerootid111',
]);

PutResourcePolicy

$result = $client->putResourcePolicy([/* ... */]);
$promise = $client->putResourcePolicyAsync([/* ... */]);

Creates or updates a resource policy.

You can only call this operation from the organization's management account.

Parameter Syntax

$result = $client->putResourcePolicy([
    'Content' => '<string>', // REQUIRED
    'Tags' => [
        [
            'Key' => '<string>', // REQUIRED
            'Value' => '<string>', // REQUIRED
        ],
        // ...
    ],
]);

Parameter Details

Members

Content

: Required: Yes
: Type: string

If provided, the new content for the resource policy. The text must be correctly formatted JSON that complies with the syntax for the resource policy's type. For more information, see SCP syntax in the Organizations User Guide.

Tags

: Type: Array of Tag structures

A list of tags that you want to attach to the newly created resource policy. For each tag in the list, you must specify both a tag key and a value. You can set the value to an empty string, but you can't set it to null. For more information about tagging, see Tagging Organizations resources in the Organizations User Guide.

Calls with tags apply to the initial creation of the resource policy, otherwise an exception is thrown. If any one of the tags is not valid or if you exceed the allowed number of tags for the resource policy, then the entire request fails and the resource policy is not created.

Result Syntax

[
    'ResourcePolicy' => [
        'Content' => '<string>',
        'ResourcePolicySummary' => [
            'Arn' => '<string>',
            'Id' => '<string>',
        ],
    ],
]

Result Details

Members

ResourcePolicy

: Type: ResourcePolicy structure

A structure that contains details about the resource policy.

Errors

Organizations can't complete your request because of an internal service error. Try again later.

This action isn't available in the current Amazon Web Services Region.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

The target of the operation is currently being modified by a different request. Try again later.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

RegisterDelegatedAdministrator

$result = $client->registerDelegatedAdministrator([/* ... */]);
$promise = $client->registerDelegatedAdministratorAsync([/* ... */]);

Enables the specified member account to administer the Organizations features of the specified Amazon Web Services service. It grants read-only access to Organizations service data. The account still requires IAM permissions to access and administer the Amazon Web Services service.

This operation can be called only from the organization's management account.

Parameter Syntax

$result = $client->registerDelegatedAdministrator([
    'AccountId' => '<string>', // REQUIRED
    'ServicePrincipal' => '<string>', // REQUIRED
]);

Parameter Details

Members

AccountId

: Required: Yes
: Type: string

The account ID number of the member account in the organization to register as a delegated administrator.

ServicePrincipal

: Required: Yes
: Type: string

The service principal of the Amazon Web Services service for which you want to make the member account a delegated administrator.

Result Syntax

[]

Result Details

The results for this operation are always empty.

Errors

AccountAlreadyRegisteredException:

The specified account is already a delegated administrator for this Amazon Web Services service.

We can't find an Amazon Web Services account with the AccountId that you specified, or the account whose credentials you used to make this request isn't a member of an organization.

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

The target of the operation is currently being modified by a different request. Try again later.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Organizations can't complete your request because of an internal service error. Try again later.

This action isn't available in the current Amazon Web Services Region.

RemoveAccountFromOrganization

$result = $client->removeAccountFromOrganization([/* ... */]);
$promise = $client->removeAccountFromOrganizationAsync([/* ... */]);

Removes the specified account from the organization.

The removed account becomes a standalone account that isn't a member of any organization. It's no longer subject to any policies and is responsible for its own bill payments. The organization's management account is no longer charged for any expenses accrued by the member account after it's removed from the organization.

This operation can be called only from the organization's management account. Member accounts can remove themselves with LeaveOrganization instead.

You can remove an account from your organization only if the account is configured with the information required to operate as a standalone account. When you create an account in an organization using the Organizations console, API, or CLI commands, the information required of standalone accounts is not automatically collected. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
The account that you want to leave must not be a delegated administrator account for any Amazon Web Services service enabled for your organization. If the account is a delegated administrator, you must first change the delegated administrator account to another account that is remaining in the organization.
After the account leaves the organization, all tags that were attached to the account object in the organization are deleted. Amazon Web Services accounts outside of an organization do not support tags.

Parameter Syntax

$result = $client->removeAccountFromOrganization([
    'AccountId' => '<string>', // REQUIRED
]);

Parameter Details

Members

AccountId

: Required: Yes
: Type: string

The unique identifier (ID) of the member account that you want to remove from the organization.

The regex pattern for an account ID string requires exactly 12 digits.

Result Syntax

[]

Result Details

The results for this operation are always empty.

Errors

We can't find an Amazon Web Services account with the AccountId that you specified, or the account whose credentials you used to make this request isn't a member of an organization.

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

The target of the operation is currently being modified by a different request. Try again later.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

MasterCannotLeaveOrganizationException:

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Examples

Example 1: To remove an account from an organization as the master account

The following example shows you how to remove an account from an organization:

$result = $client->removeAccountFromOrganization([
    'AccountId' => '333333333333',
]);

TagResource

$result = $client->tagResource([/* ... */]);
$promise = $client->tagResourceAsync([/* ... */]);

Adds one or more tags to the specified resource.

Currently, you can attach tags to the following resources in Organizations.

Amazon Web Services account
Organization root
Organizational unit (OU)
Policy (any type)

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->tagResource([
    'ResourceId' => '<string>', // REQUIRED
    'Tags' => [ // REQUIRED
        [
            'Key' => '<string>', // REQUIRED
            'Value' => '<string>', // REQUIRED
        ],
        // ...
    ],
]);

Parameter Details

Members

ResourceId

: Required: Yes
: Type: string

The ID of the resource to add a tag to.

You can specify any of the following taggable resources.

Amazon Web Services account – specify the account ID number.
Organizational unit – specify the OU ID that begins with ou- and looks similar to: ou-1a2b-34uvwxyz
Root – specify the root ID that begins with r- and looks similar to: r-1a2b
Policy – specify the policy ID that begins with p- andlooks similar to: p-12abcdefg3

Tags

: Required: Yes
: Type: Array of Tag structures

A list of tags to add to the specified resource.

For each tag in the list, you must specify both a tag key and a value. The value can be an empty string, but you can't set it to null.

If any one of the tags is not valid or if you exceed the maximum allowed number of tags for a resource, then the entire request fails.

Result Syntax

[]

Result Details

The results for this operation are always empty.

Errors

The target of the operation is currently being modified by a different request. Try again later.

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

We can't find a root, OU, account, or policy with the TargetId that you specified.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

UntagResource

$result = $client->untagResource([/* ... */]);
$promise = $client->untagResourceAsync([/* ... */]);

Removes any tags with the specified keys from the specified resource.

You can attach tags to the following resources in Organizations.

Amazon Web Services account
Organization root
Organizational unit (OU)
Policy (any type)

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->untagResource([
    'ResourceId' => '<string>', // REQUIRED
    'TagKeys' => ['<string>', ...], // REQUIRED
]);

Parameter Details

Members

ResourceId

: Required: Yes
: Type: string

The ID of the resource to remove a tag from.

You can specify any of the following taggable resources.

Amazon Web Services account – specify the account ID number.
Organizational unit – specify the OU ID that begins with ou- and looks similar to: ou-1a2b-34uvwxyz
Root – specify the root ID that begins with r- and looks similar to: r-1a2b
Policy – specify the policy ID that begins with p- andlooks similar to: p-12abcdefg3

TagKeys

: Required: Yes
: Type: Array of strings

The list of keys for tags to remove from the specified resource.

Result Syntax

[]

Result Details

The results for this operation are always empty.

Errors

The target of the operation is currently being modified by a different request. Try again later.

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

We can't find a root, OU, account, or policy with the TargetId that you specified.

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

UpdateOrganizationalUnit

$result = $client->updateOrganizationalUnit([/* ... */]);
$promise = $client->updateOrganizationalUnitAsync([/* ... */]);

Renames the specified organizational unit (OU). The ID and ARN don't change. The child OUs and accounts remain in place, and any attached policies of the OU remain attached.

This operation can be called only from the organization's management account.

Parameter Syntax

$result = $client->updateOrganizationalUnit([
    'Name' => '<string>',
    'OrganizationalUnitId' => '<string>', // REQUIRED
]);

Parameter Details

Members

Name

: Type: string

The new name that you want to assign to the OU.

The regex pattern that is used to validate this parameter is a string of any of the characters in the ASCII character range.

OrganizationalUnitId

: Required: Yes
: Type: string

The unique identifier (ID) of the OU that you want to rename. You can get the ID from the ListOrganizationalUnitsForParent operation.

Result Syntax

[
    'OrganizationalUnit' => [
        'Arn' => '<string>',
        'Id' => '<string>',
        'Name' => '<string>',
    ],
]

Result Details

Members

OrganizationalUnit

: Type: OrganizationalUnit structure

A structure that contains the details about the specified OU, including its new name.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

DuplicateOrganizationalUnitException:

The target of the operation is currently being modified by a different request. Try again later.

An OU with the same name already exists.

OrganizationalUnitNotFoundException:

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

We can't find an OU with the OrganizationalUnitId that you specified.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

Examples

Example 1: To rename an organizational unit

The following example shows how to rename an OU. The output confirms the new name:/n/n

$result = $client->updateOrganizationalUnit([
    'Name' => 'AccountingOU',
    'OrganizationalUnitId' => 'ou-examplerootid111-exampleouid111',
]);

Result syntax:

[
    'OrganizationalUnit' => [
        'Arn' => 'arn:aws:organizations::111111111111:ou/o-exampleorgid/ou-examplerootid111-exampleouid111',
        'Id' => 'ou-examplerootid111-exampleouid111',
        'Name' => 'AccountingOU',
    ],
]

UpdatePolicy

$result = $client->updatePolicy([/* ... */]);
$promise = $client->updatePolicyAsync([/* ... */]);

Updates an existing policy with a new name, description, or content. If you don't supply any parameter, that value remains unchanged. You can't change a policy's type.

This operation can be called only from the organization's management account or by a member account that is a delegated administrator for an Amazon Web Services service.

Parameter Syntax

$result = $client->updatePolicy([
    'Content' => '<string>',
    'Description' => '<string>',
    'Name' => '<string>',
    'PolicyId' => '<string>', // REQUIRED
]);

Parameter Details

Members

Content

: Type: string

If provided, the new content for the policy. The text must be correctly formatted JSON that complies with the syntax for the policy's type. For more information, see SCP syntax in the Organizations User Guide.

The maximum size of a policy document depends on the policy's type. For more information, see Maximum and minimum values in the Organizations User Guide.

Description

: Type: string

If provided, the new description for the policy.

Name

: Type: string

If provided, the new name for the policy.

The regex pattern that is used to validate this parameter is a string of any of the characters in the ASCII character range.

PolicyId

: Required: Yes
: Type: string

The unique identifier (ID) of the policy that you want to update.

The regex pattern for a policy ID string requires "p-" followed by from 8 to 128 lowercase or uppercase letters, digits, or the underscore character (_).

Result Syntax

[
    'Policy' => [
        'Content' => '<string>',
        'PolicySummary' => [
            'Arn' => '<string>',
            'AwsManaged' => true || false,
            'Description' => '<string>',
            'Id' => '<string>',
            'Name' => '<string>',
            'Type' => 'SERVICE_CONTROL_POLICY|RESOURCE_CONTROL_POLICY|TAG_POLICY|BACKUP_POLICY|AISERVICES_OPT_OUT_POLICY|CHATBOT_POLICY|DECLARATIVE_POLICY_EC2',
        ],
    ],
]

Result Details

Members

Policy

: Type: Policy structure

A structure that contains details about the updated policy, showing the requested changes.

Errors

Your account isn't a member of an organization. To make this request, you must use the credentials of an account that belongs to an organization.

The target of the operation is currently being modified by a different request. Try again later.

DuplicatePolicyException:

Some of the reasons in the following list might not be applicable to this specific API or operation.

ACCOUNT_CANNOT_LEAVE_ORGANIZATION: You attempted to remove the management account from the organization. You can't remove the management account. Instead, after you remove all member accounts, delete the organization itself.
ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove an account from the organization that doesn't yet have enough information to exist as a standalone account. This account requires you to first complete phone verification. Follow the steps at Removing a member account from your organization in the Organizations User Guide.
ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can create in one day.
ACCOUNT_CREATION_NOT_COMPLETE: Your account setup isn't complete or your account isn't fully active. You must complete the account setup before you create an organization.
ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on the number of accounts in an organization. If you need more accounts, contact Amazon Web Services Support to request an increase in your limit.

Or the number of invitations that you tried to send would cause you to exceed the limit of accounts in your organization. Send fewer invitations or contact Amazon Web Services Support to request an increase in the number of accounts.

Deleted and closed accounts still count toward your limit.

If you get this exception when running a command immediately after creating the organization, wait one hour and try again. After an hour, if the command continues to fail with this error, contact Amazon Web Services Support.
CANNOT_REGISTER_SUSPENDED_ACCOUNT_AS_DELEGATED_ADMINISTRATOR: You cannot register a suspended account as a delegated administrator.
CANNOT_REGISTER_MASTER_AS_DELEGATED_ADMINISTRATOR: You attempted to register the management account of the organization as a delegated administrator for an Amazon Web Services service integrated with Organizations. You can designate only a member account as a delegated administrator.
CANNOT_CLOSE_MANAGEMENT_ACCOUNT: You attempted to close the management account. To close the management account for the organization, you must first either remove or close all member accounts in the organization. Follow standard account closure process using root credentials.
CANNOT_REMOVE_DELEGATED_ADMINISTRATOR_FROM_ORG: You attempted to remove an account that is registered as a delegated administrator for a service integrated with your organization. To complete this operation, you must first deregister this account as a delegated administrator.
CLOSE_ACCOUNT_QUOTA_EXCEEDED: You have exceeded close account quota for the past 30 days.
CLOSE_ACCOUNT_REQUESTS_LIMIT_EXCEEDED: You attempted to exceed the number of accounts that you can close at a time.
CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION: To create an organization in the specified region, you must enable all features mode.
DELEGATED_ADMINISTRATOR_EXISTS_FOR_THIS_SERVICE: You attempted to register an Amazon Web Services account as a delegated administrator for an Amazon Web Services service that already has a delegated administrator. To complete this operation, you must first deregister any existing delegated administrators for this service.
EMAIL_VERIFICATION_CODE_EXPIRED: The email verification code is only valid for a limited period of time. You must resubmit the request and generate a new verfication code.
HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of handshakes that you can send in one day.
INVALID_PAYMENT_INSTRUMENT: You cannot remove an account because no supported payment method is associated with the account. Amazon Web Services does not support cards issued by financial institutions in Russia or Belarus. For more information, see Managing your Amazon Web Services payments.
MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account in this organization, you first must migrate the organization's management account to the marketplace that corresponds to the management account's address. All accounts in an organization must be associated with the same marketplace.
MASTER_ACCOUNT_MISSING_BUSINESS_LICENSE: Applies only to the Amazon Web Services Regions in China. To create an organization, the master must have a valid business license. For more information, contact customer support.
MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you must first provide a valid contact address and phone number for the management account. Then try the operation again.
MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the management account must have an associated account in the Amazon Web Services GovCloud (US-West) Region. For more information, see Organizations in the Amazon Web Services GovCloud User Guide.
MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization with this management account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MAX_DELEGATED_ADMINISTRATORS_FOR_SERVICE_LIMIT_EXCEEDED: You attempted to register more delegated administrators than allowed for the service principal.
MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the number of policies of a certain type that can be attached to an entity at one time.
MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed on this resource.
MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation with this member account, you first must associate a valid payment instrument, such as a credit card, with the account. For more information, see Considerations before removing an account from an organization in the Organizations User Guide.
MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a policy from an entity that would cause the entity to have fewer than the minimum number of policies of a certain type required.
ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation that requires the organization to be configured to support all features. An organization that supports only consolidated billing features can't perform this operation.
OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is too many levels deep.
OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs that you can have in an organization.
POLICY_CONTENT_LIMIT_EXCEEDED: You attempted to create a policy that is larger than the maximum size.
POLICY_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of policies that you can have in an organization.
SERVICE_ACCESS_NOT_ENABLED: You attempted to register a delegated administrator before you enabled service access. Call the EnableAWSServiceAccess API first.
TAG_POLICY_VIOLATION: You attempted to create or update a resource with tags that are not compliant with the tag policy requirements for this account.
WAIT_PERIOD_ACTIVE: After you create an Amazon Web Services account, you must wait until at least seven days after the account was created. Invited accounts aren't subject to this waiting period.

A policy with the same name already exists.

MalformedPolicyDocumentException:

Some of the reasons in the following list might not be applicable to this specific API or operation.

DUPLICATE_TAG_KEY: Tag keys must be unique among the tags attached to the same entity.
IMMUTABLE_POLICY: You specified a policy that is managed by Amazon Web Services and can't be modified.
INPUT_REQUIRED: You must include a value for all required parameters.
INVALID_EMAIL_ADDRESS_TARGET: You specified an invalid email address for the invited account owner.
INVALID_ENUM: You specified an invalid value.
INVALID_ENUM_POLICY_TYPE: You specified an invalid policy type string.
INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid characters.
INVALID_LIST_MEMBER: You provided a list to a parameter that contains at least one invalid value.
INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter from the response to a previous call of the operation.
INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account, organization, or email) as a party.
INVALID_PATTERN: You provided a value that doesn't match the required pattern.
INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't match the required pattern.
INVALID_PRINCIPAL: You specified an invalid principal element in the policy.
INVALID_ROLE_NAME: You provided a role name that isn't valid. A role name can't begin with the reserved prefix AWSServiceRoleFor.
INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource Name (ARN) for the organization.
INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system tag. You can’t add, edit, or delete system tag keys because they're reserved for Amazon Web Services use. System tags don’t count against your tags per resource limit.
MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter for the operation.
MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer than allowed.
MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger value than allowed.
MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter than allowed.
MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller value than allowed.
MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only between entities in the same root.
NON_DETACHABLE_POLICY: You can't detach this Amazon Web Services Managed Policy.
TARGET_NOT_SUPPORTED: You can't perform the specified operation on that target entity.
UNRECOGNIZED_SERVICE_PRINCIPAL: You specified a service principal that isn't recognized.

We can't find a policy with the PolicyId that you specified.

Organizations can't complete your request because of an internal service error. Try again later.

You have sent too many requests in too short a period of time. The quota helps protect against denial-of-service attacks. Try again later.

For information about quotas that affect Organizations, see Quotas for Organizations in the Organizations User Guide.

This action isn't available in the current Amazon Web Services Region.