GetLoadBalancerMetricData
Returns information about health metrics for your Lightsail load balancer.
Metrics report the utilization of your resources, and the error counts generated by them. Monitor and collect metric data regularly to maintain the reliability, availability, and performance of your resources.
Request Syntax
{
"endTime": number
,
"loadBalancerName": "string
",
"metricName": "string
",
"period": number
,
"startTime": number
,
"statistics": [ "string
" ],
"unit": "string
"
}
Request Parameters
For information about the parameters that are common to all actions, see Common Parameters.
The request accepts the following data in JSON format.
- endTime
-
The end time of the period.
Type: Timestamp
Required: Yes
- loadBalancerName
-
The name of the load balancer.
Type: String
Pattern:
\w[\w\-]*\w
Required: Yes
- metricName
-
The metric for which you want to return information.
Valid load balancer metric names are listed below, along with the most useful
statistics
to include in your request, and the publishedunit
value.-
ClientTLSNegotiationErrorCount
- The number of TLS connections initiated by the client that did not establish a session with the load balancer due to a TLS error generated by the load balancer. Possible causes include a mismatch of ciphers or protocols.Statistics
: The most useful statistic isSum
.Unit
: The published unit isCount
. -
HealthyHostCount
- The number of target instances that are considered healthy.Statistics
: The most useful statistic areAverage
,Minimum
, andMaximum
.Unit
: The published unit isCount
. -
HTTPCode_Instance_2XX_Count
- The number of HTTP 2XX response codes generated by the target instances. This does not include any response codes generated by the load balancer.Statistics
: The most useful statistic isSum
. Note thatMinimum
,Maximum
, andAverage
all return1
.Unit
: The published unit isCount
. -
HTTPCode_Instance_3XX_Count
- The number of HTTP 3XX response codes generated by the target instances. This does not include any response codes generated by the load balancer.Statistics
: The most useful statistic isSum
. Note thatMinimum
,Maximum
, andAverage
all return1
.Unit
: The published unit isCount
. -
HTTPCode_Instance_4XX_Count
- The number of HTTP 4XX response codes generated by the target instances. This does not include any response codes generated by the load balancer.Statistics
: The most useful statistic isSum
. Note thatMinimum
,Maximum
, andAverage
all return1
.Unit
: The published unit isCount
. -
HTTPCode_Instance_5XX_Count
- The number of HTTP 5XX response codes generated by the target instances. This does not include any response codes generated by the load balancer.Statistics
: The most useful statistic isSum
. Note thatMinimum
,Maximum
, andAverage
all return1
.Unit
: The published unit isCount
. -
HTTPCode_LB_4XX_Count
- The number of HTTP 4XX client error codes that originated from the load balancer. Client errors are generated when requests are malformed or incomplete. These requests were not received by the target instance. This count does not include response codes generated by the target instances.Statistics
: The most useful statistic isSum
. Note thatMinimum
,Maximum
, andAverage
all return1
.Unit
: The published unit isCount
. -
HTTPCode_LB_5XX_Count
- The number of HTTP 5XX server error codes that originated from the load balancer. This does not include any response codes generated by the target instance. This metric is reported if there are no healthy instances attached to the load balancer, or if the request rate exceeds the capacity of the instances (spillover) or the load balancer.Statistics
: The most useful statistic isSum
. Note thatMinimum
,Maximum
, andAverage
all return1
.Unit
: The published unit isCount
. -
InstanceResponseTime
- The time elapsed, in seconds, after the request leaves the load balancer until a response from the target instance is received.Statistics
: The most useful statistic isAverage
.Unit
: The published unit isSeconds
. -
RejectedConnectionCount
- The number of connections that were rejected because the load balancer had reached its maximum number of connections.Statistics
: The most useful statistic isSum
.Unit
: The published unit isCount
. -
RequestCount
- The number of requests processed over IPv4. This count includes only the requests with a response generated by a target instance of the load balancer.Statistics
: The most useful statistic isSum
. Note thatMinimum
,Maximum
, andAverage
all return1
.Unit
: The published unit isCount
. -
UnhealthyHostCount
- The number of target instances that are considered unhealthy.Statistics
: The most useful statistic areAverage
,Minimum
, andMaximum
.Unit
: The published unit isCount
.
Type: String
Valid Values:
ClientTLSNegotiationErrorCount | HealthyHostCount | UnhealthyHostCount | HTTPCode_LB_4XX_Count | HTTPCode_LB_5XX_Count | HTTPCode_Instance_2XX_Count | HTTPCode_Instance_3XX_Count | HTTPCode_Instance_4XX_Count | HTTPCode_Instance_5XX_Count | InstanceResponseTime | RejectedConnectionCount | RequestCount
Required: Yes
-
- period
-
The granularity, in seconds, of the returned data points.
Type: Integer
Valid Range: Minimum value of 60. Maximum value of 86400.
Required: Yes
- startTime
-
The start time of the period.
Type: Timestamp
Required: Yes
- statistics
-
The statistic for the metric.
The following statistics are available:
-
Minimum
- The lowest value observed during the specified period. Use this value to determine low volumes of activity for your application. -
Maximum
- The highest value observed during the specified period. Use this value to determine high volumes of activity for your application. -
Sum
- All values submitted for the matching metric added together. You can use this statistic to determine the total volume of a metric. -
Average
- The value of Sum / SampleCount during the specified period. By comparing this statistic with the Minimum and Maximum values, you can determine the full scope of a metric and how close the average use is to the Minimum and Maximum values. This comparison helps you to know when to increase or decrease your resources. -
SampleCount
- The count, or number, of data points used for the statistical calculation.
Type: Array of strings
Valid Values:
Minimum | Maximum | Sum | Average | SampleCount
Required: Yes
-
- unit
-
The unit for the metric data request. Valid units depend on the metric data being requested. For the valid units with each available metric, see the
metricName
parameter.Type: String
Valid Values:
Seconds | Microseconds | Milliseconds | Bytes | Kilobytes | Megabytes | Gigabytes | Terabytes | Bits | Kilobits | Megabits | Gigabits | Terabits | Percent | Count | Bytes/Second | Kilobytes/Second | Megabytes/Second | Gigabytes/Second | Terabytes/Second | Bits/Second | Kilobits/Second | Megabits/Second | Gigabits/Second | Terabits/Second | Count/Second | None
Required: Yes
Response Syntax
{
"metricData": [
{
"average": number,
"maximum": number,
"minimum": number,
"sampleCount": number,
"sum": number,
"timestamp": number,
"unit": "string"
}
],
"metricName": "string"
}
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
- metricData
-
An array of objects that describe the metric data returned.
Type: Array of MetricDatapoint objects
- metricName
-
The name of the metric returned.
Type: String
Valid Values:
ClientTLSNegotiationErrorCount | HealthyHostCount | UnhealthyHostCount | HTTPCode_LB_4XX_Count | HTTPCode_LB_5XX_Count | HTTPCode_Instance_2XX_Count | HTTPCode_Instance_3XX_Count | HTTPCode_Instance_4XX_Count | HTTPCode_Instance_5XX_Count | InstanceResponseTime | RejectedConnectionCount | RequestCount
Errors
For information about the errors that are common to all actions, see Common Errors.
- AccessDeniedException
-
Lightsail throws this exception when the user cannot be authenticated or uses invalid credentials to access a resource.
HTTP Status Code: 400
- AccountSetupInProgressException
-
Lightsail throws this exception when an account is still in the setup in progress state.
HTTP Status Code: 400
- InvalidInputException
-
Lightsail throws this exception when user input does not conform to the validation rules of an input field.
Note
Domain and distribution APIs are only available in the N. Virginia (
us-east-1
) AWS Region. Please set your AWS Region configuration tous-east-1
to create, view, or edit these resources.HTTP Status Code: 400
- NotFoundException
-
Lightsail throws this exception when it cannot find a resource.
HTTP Status Code: 400
- OperationFailureException
-
Lightsail throws this exception when an operation fails to execute.
HTTP Status Code: 400
- ServiceException
-
A general service exception.
HTTP Status Code: 500
- UnauthenticatedException
-
Lightsail throws this exception when the user has not been authenticated.
HTTP Status Code: 400
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following: