URI HTTP methods Schemas Properties See also

Outputs: update, remove

URI

/v1/flows/flowArn/outputs/outputArn

HTTP methods

PUT

Operation ID: UpdateFlowOutput

Updates an existing flow output.

Path parameters
Name	Type	Required	Description
`flowArn`	String	True	The Amazon Resource Name (ARN) of the flow.
`outputArn`	String	True	The ARN of the output that you want to update.

Responses
Status code	Response model	Description
`202`	`UpdateFlowOutputResponse`	MediaConnect is updating the output.
`400`	`ResponseError`	The request that you submitted is not valid.
`403`	`ResponseError`	You don't have the required permissions to perform this operation.
`404`	`ResponseError`	MediaConnect did not find the resource that you specified in the request.
`429`	`ResponseError`	You have exceeded the service request rate limit for your MediaConnect account.
`500`	`ResponseError`	MediaConnect can't fulfill your request because it encountered an unexpected condition.
`503`	`ResponseError`	MediaConnect is currently unavailable. Try again later.

DELETE

Operation ID: RemoveFlowOutput

Removes an output from an existing flow. This request can be made only on an output that does not have an entitlement associated with it. If the output has an entitlement, you must revoke the entitlement instead. When an entitlement is revoked from a flow, the service automatically removes the associated output.

Path parameters
Name	Type	Required	Description
`flowArn`	String	True	The Amazon Resource Name (ARN) of the flow.
`outputArn`	String	True	The ARN of the output that you want to update.

Responses
Status code	Response model	Description
`202`	`RemoveFlowOutputResponse`	MediaConnect is removing the output.
`400`	`ResponseError`	The request that you submitted is not valid.
`403`	`ResponseError`	You don't have the required permissions to perform this operation.
`404`	`ResponseError`	MediaConnect did not find the resource that you specified in the request.
`429`	`ResponseError`	You have exceeded the service request rate limit for your MediaConnect account.
`500`	`ResponseError`	MediaConnect can't fulfill your request because it encountered an unexpected condition.
`503`	`ResponseError`	MediaConnect is currently unavailable. Try again later.

Schemas

Request bodies


{
  "outputStatus": enum,
  "mediaStreamOutputConfigurations": [
    {
      "encodingParameters": {
        "encoderProfile": enum,
        "compressionFactor": number
      },
      "mediaStreamName": "string",
      "encodingName": enum,
      "destinationConfigurations": [
        {
          "destinationIp": "string",
          "destinationPort": integer,
          "interface": {
            "name": "string"
          }
        }
      ]
    }
  ],
  "streamId": "string",
  "minLatency": integer,
  "destination": "string",
  "maxLatency": integer,
  "description": "string",
  "smoothingLatency": integer,
  "vpcInterfaceAttachment": {
    "vpcInterfaceName": "string"
  },
  "remoteId": "string",
  "senderIpAddress": "string",
  "protocol": enum,
  "encryption": {
    "resourceId": "string",
    "roleArn": "string",
    "secretArn": "string",
    "constantInitializationVector": "string",
    "keyType": enum,
    "region": "string",
    "deviceId": "string",
    "url": "string",
    "algorithm": enum
  },
  "port": integer,
  "senderControlPort": integer,
  "cidrAllowList": [
    "string"
  ]
}

Response bodies


{
  "output": {
    "outputStatus": enum,
    "listenerAddress": "string",
    "mediaStreamOutputConfigurations": [
      {
        "encodingParameters": {
          "encoderProfile": enum,
          "compressionFactor": number
        },
        "mediaStreamName": "string",
        "encodingName": enum,
        "destinationConfigurations": [
          {
            "destinationIp": "string",
            "destinationPort": integer,
            "outboundIp": "string",
            "interface": {
              "name": "string"
            }
          }
        ]
      }
    ],
    "destination": "string",
    "description": "string",
    "entitlementArn": "string",
    "transport": {
      "streamId": "string",
      "minLatency": integer,
      "maxLatency": integer,
      "maxBitrate": integer,
      "sourceListenerPort": integer,
      "smoothingLatency": integer,
      "remoteId": "string",
      "sourceListenerAddress": "string",
      "senderIpAddress": "string",
      "protocol": enum,
      "senderControlPort": integer,
      "cidrAllowList": [
        "string"
      ],
      "maxSyncBuffer": integer
    },
    "vpcInterfaceAttachment": {
      "vpcInterfaceName": "string"
    },
    "bridgeArn": "string",
    "outputArn": "string",
    "encryption": {
      "resourceId": "string",
      "roleArn": "string",
      "secretArn": "string",
      "constantInitializationVector": "string",
      "keyType": enum,
      "region": "string",
      "deviceId": "string",
      "url": "string",
      "algorithm": enum
    },
    "port": integer,
    "bridgePorts": [
      integer
    ],
    "name": "string",
    "dataTransferSubscriberFeePercent": integer,
    "mediaLiveInputArn": "string"
  },
  "flowArn": "string"
}


{
  "outputArn": "string",
  "flowArn": "string"
}


{
  "message": "string"
}

Properties

DestinationConfiguration

The definition of a media stream that is associated with the output.

Property	Type	Required	Description
`destinationIp`	string	True	The IP address where contents of the media stream will be sent.
`destinationPort`	integer Format: int32	True	The port to use when the content of the media stream is distributed to the output.
`interface`	Interface	True	The VPC interface that is used for the media stream associated with the output.
`outboundIp`	string	True	The IP address that the receiver requires in order to establish a connection with the flow. This value is represented by the elastic network interface IP address of the VPC. This field applies only to outputs that use the CDI or ST 2110 JPEG XS or protocol.

DestinationConfigurationRequest

The definition of a media stream that you want to associate with the output.

Property Type Required Description

Property	Type	Required	Description
`destinationIp`	string	True	The IP address where you want MediaConnect to send contents of the media stream.
`destinationPort`	integer Format: int32	True	The port that you want MediaConnect to use when it distributes the media stream to the output.
`interface`	InterfaceRequest	True	The VPC interface that you want to use for the media stream associated with the output.

destinationIp

string

True

The IP address where you want MediaConnect to send contents of the media stream.

destinationPort

integer

Format: int32

True

The port that you want MediaConnect to use when it distributes the media stream to the output.

interface

InterfaceRequest

True

The VPC interface that you want to use for the media stream associated with the output.

EncodingParameters

A collection of parameters that determine how MediaConnect will convert the content. These fields only apply to outputs on flows that have a CDI source.

Property Type Required Description

Property	Type	Required	Description
`compressionFactor`	number Format: float	True	A value that is used to calculate compression for an output. The bitrate of the output is calculated as follows: Output bitrate = (1 / compressionFactor) * (source bitrate) This property only applies to outputs that use the ST 2110 JPEG XS protocol, with a flow source that uses the CDI protocol. Valid values are in the range of 3.0 to 10.0, inclusive.
`encoderProfile`	string Values: `main \| high`	True	A setting on the encoder that drives compression settings. This property only applies to video media streams associated with outputs that use the ST 2110 JPEG XS protocol, with a flow source that uses the CDI protocol.

compressionFactor

number

Format: float

True

A value that is used to calculate compression for an output. The bitrate of the output is calculated as follows:

Output bitrate = (1 / compressionFactor) * (source bitrate)

This property only applies to outputs that use the ST 2110 JPEG XS protocol, with a flow source that uses the CDI protocol. Valid values are in the range of 3.0 to 10.0, inclusive.

encoderProfile

string

Values: main | high

True

A setting on the encoder that drives compression settings. This property only applies to video media streams associated with outputs that use the ST 2110 JPEG XS protocol, with a flow source that uses the CDI protocol.

EncodingParametersRequest

A collection of parameters that determine how MediaConnect will convert the content. These fields only apply to outputs on flows that have a CDI source.

Property Type Required Description

Property	Type	Required	Description
`compressionFactor`	number Format: float	True	A value that is used to calculate compression for an output. The bitrate of the output is calculated as follows: Output bitrate = (1 / compressionFactor) * (source bitrate) This property only applies to outputs that use the ST 2110 JPEG XS protocol, with a flow source that uses the CDI protocol. Valid values are in the range of 3.0 to 10.0, inclusive.
`encoderProfile`	string Values: `main \| high`	True	A setting on the encoder that drives compression settings. This property only applies to video media streams associated with outputs that use the ST 2110 JPEG XS protocol, if at least one source on the flow uses the CDI protocol.

compressionFactor

number

Format: float

True

A value that is used to calculate compression for an output. The bitrate of the output is calculated as follows:

Output bitrate = (1 / compressionFactor) * (source bitrate)

This property only applies to outputs that use the ST 2110 JPEG XS protocol, with a flow source that uses the CDI protocol. Valid values are in the range of 3.0 to 10.0, inclusive.

encoderProfile

string

Values: main | high

True

A setting on the encoder that drives compression settings. This property only applies to video media streams associated with outputs that use the ST 2110 JPEG XS protocol, if at least one source on the flow uses the CDI protocol.

Encryption

Information about the encryption of the flow.

Property	Type	Required	Description
`algorithm`	string Values: `aes128 \| aes192 \| aes256`	False	The type of algorithm that is used for the encryption (such as aes128, aes192, or aes256).
`constantInitializationVector`	string	False	A 128-bit, 16-byte hex value represented by a 32-character string, to be used with the key for encrypting content. This parameter is not valid for static key encryption.
`deviceId`	string	False	The value of one of the devices that you configured with your digital rights management (DRM) platform key provider. This parameter is required for SPEKE encryption and is not valid for static key encryption.
`keyType`	string Values: `speke \| static-key \| srt-password`	False	The type of key that is used for the encryption. If you don't specify a `keyType` value, the service uses the default setting (`static-key`).
`region`	string	False	The AWS Region that the API Gateway proxy endpoint was created in. This parameter is required for SPEKE encryption and is not valid for static key encryption.
`resourceId`	string	False	An identifier for the content. The service sends this value to the key server to identify the current endpoint. The resource ID is also known as the content ID. This parameter is required for SPEKE encryption and is not valid for static key encryption.
`roleArn`	string	True	The Amazon Resource Name (ARN) of the role that you created during setup (when you set up MediaConnect as a trusted entity).
`secretArn`	string	False	The ARN of the secret that you created in AWS Secrets Manager to store the encryption key.
`url`	string	False	The URL from the API Gateway proxy that you set up to talk to your key server. This parameter is required for SPEKE encryption and is not valid for static key encryption.

Interface

The VPC interface that you want to use for the media stream associated with the output.

Property	Type	Required	Description
`name`	string	True	The name of the VPC interface that you want to use for the media stream associated with the output.

InterfaceRequest

The VPC interface that you want to designate where the media stream is coming from or going to.

Property	Type	Required	Description
`name`	string	True	The name of the VPC interface.

MediaStreamOutputConfiguration

The media stream that is associated with the output, and the parameters for that association.

Property	Type	Required	Description
`destinationConfigurations`	Array of type DestinationConfiguration	False	The media streams that you want to associate with the output.
`encodingName`	string Values: `jxsv \| raw \| smpte291 \| pcm`	True	The format that will be used to encode the data. For ancillary data streams, set the encoding name to `smpte291`. For audio streams, set the encoding name to `pcm`. For video streams on sources or outputs that use the CDI protocol, set the encoding name to `raw`. For video streams on sources or outputs that use the ST 2110 JPEG XS protocol, set the encoding name to `jxsv`.
`encodingParameters`	EncodingParameters	False	A collection of parameters that determine how MediaConnect will convert the content. These fields only apply to outputs on flows that have a CDI source.
`mediaStreamName`	string	True	A name that helps you distinguish one media stream from another.

MediaStreamOutputConfigurationRequest

The media stream that you want to associate with the output, and the parameters for that association.

Property	Type	Required	Description
`destinationConfigurations`	Array of type DestinationConfigurationRequest	False	The media streams that you want to associate with the output.
`encodingName`	string Values: `jxsv \| raw \| smpte291 \| pcm`	True	The format that will be used to encode the data. For ancillary data streams, set the encoding name to `smpte291`. For audio streams, set the encoding name to `pcm`. For video, 2110 streams, set the encoding name to `raw`. For video, JPEG XS streams, set the encoding name to `jxsv`.
`encodingParameters`	EncodingParametersRequest	False	A collection of parameters that determine how MediaConnect will convert the content. These fields only apply to outputs on flows that have a CDI source.
`mediaStreamName`	string	True	The name of the media stream that is associated with the output.

Output

The settings for an output.

Property	Type	Required	Description
`bridgeArn`	string	False	The ARN of the bridge that added this output.
`bridgePorts`	Array of type integer	False	The bridge output ports currently in use.
`dataTransferSubscriberFeePercent`	integer	False	The percentage of the entitlement data transfer fee that the subscriber is responsible for.
`description`	string	False	A description of the output. This description is not visible outside of the current AWS account even if the account grants entitlements to other accounts.
`destination`	string	False	The IP address where you want to send the output. This field applies only to outputs that use a push protocol, such as RIST or Zixi push.
`encryption`	Encryption	False	The encryption credentials that you want to use for the output.
`entitlementArn`	string	False	The ARN of the entitlement on the originator's flow. This value is relevant only on entitled flows.
`listenerAddress`	string	False	The IP address that the receiver requires in order to establish a connection with the flow. For public networking, the ListenerAddress is represented by the elastic IP address of the flow. For private networking, the ListenerAddress is represented by the elastic network interface IP address of the VPC. This field applies only to outputs that use a pull protocol, such as Zixi pull or SRT listener.
`mediaLiveInputArn`	string	False	The input ARN of the AWS Elemental MediaLive channel. This parameter is relevant only for outputs that were added by creating a MediaLive input.
`mediaStreamOutputConfigurations`	Array of type MediaStreamOutputConfiguration	False	The configuration for each media stream that is associated with the output.
`name`	string	True	The name of the output. This value must be unique within the current flow.
`outputArn`	string	True	The ARN of the output.
`outputStatus`	string Values: `ENABLED \| DISABLED`	False	An indication of whether the output is transmitting data or not.
`port`	integer	False	The port to use when content is distributed to the output.
`transport`	Transport	False	Attributes that are related to the transport stream.
`vpcInterfaceAttachment`	VpcInterfaceAttachment	False	The VPC interface that you want to send your output to.

RemoveFlowOutputResponse

The result of a successful RemoveFlowOutput request including the flow ARN and the output ARN that was removed.

Property	Type	Required	Description
`flowArn`	string	True	The ARN of the flow that is associated with the output you removed.
`outputArn`	string	True	The ARN of the output that you removed.

ResponseError

An exception raised by MediaConnect when you submit a request that cannot be completed. For more information, see the error message and documentation for the operation.

Property	Type	Required	Description
`message`	string	True	The specific error message that MediaConnect returns to help you understand the reason that the request did not succeed.

Transport

Attributes that are related to the transport stream.

Property	Type	Required	Description
`cidrAllowList`	Array of type string	False	The range of IP addresses that are allowed to initiate output requests to this flow. Format the IP addresses as a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.
`maxBitrate`	integer Format: int64	False	The maximum bitrate for RIST, RTP, and RTP-FEC streams.
`maxLatency`	integer Format: int64	False	The maximum latency in milliseconds for a RIST source, a Zixi-based source, or a Zixi-based output.
`maxSyncBuffer`	integer Format: int32	False	The size of the buffer (in milliseconds) to use to sync incoming source data.
`minLatency`	integer Format: int64	False	The minimum latency in milliseconds for SRT-based streams. In streams that use the SRT protocol, this value that you set on your MediaConnect source or output represents the minimal potential latency of that connection. The latency of the stream is set to the highest number between the sender’s minimum latency and the receiver’s minimum latency.
`protocol`	string Values: `zixi-push \| rtp-fec \| rtp \| zixi-pull \| rist \| st2110-jpegxs \| cdi \| srt-listener \| srt-caller \| udp`	True	The protocol that is used by the source or output.
`remoteId`	string	False	The identifier that is assigned to the Zixi receiver. This parameter applies only to outputs that use Zixi pull.
`senderControlPort`	integer Format: int32	False	The port that the flow uses to send outbound requests to initiate connection with the sender.
`senderIpAddress`	string	False	The IP address that the flow communicates with to initiate connection with the sender.
`smoothingLatency`	integer Format: int64	False	The smoothing latency in milliseconds for RIST, RTP, and RTP-FEC streams.
`sourceListenerAddress`	string	False	Source IP or domain name for SRT-caller protocol.
`sourceListenerPort`	integer	False	Source port for SRT-caller protocol.
`streamId`	string	False	The stream ID that you want to use for this transport. This parameter applies only to Zixi and SRT caller-based streams.

UpdateEncryption

Information about the encryption of the flow.

Property	Type	Required	Description
`algorithm`	string Values: `aes128 \| aes192 \| aes256`	False	The type of algorithm that is used for the encryption (such as aes128, aes192, or aes256).
`constantInitializationVector`	string	False	A 128-bit, 16-byte hex value represented by a 32-character string, to be used with the key for encrypting content. This parameter is not valid for static key encryption.
`deviceId`	string	False	The value of one of the devices that you configured with your digital rights management (DRM) platform key provider. This parameter is required for SPEKE encryption and is not valid for static key encryption.
`keyType`	string Values: `speke \| static-key \| srt-password`	False	The type of key that is used for the encryption. If you don't specify a `keyType` value, the service uses the default setting (`static-key`).
`region`	string	False	The AWS Region that the API Gateway proxy endpoint was created in. This parameter is required for SPEKE encryption and is not valid for static key encryption.
`resourceId`	string	False	An identifier for the content. The service sends this value to the key server to identify the current endpoint. The resource ID is also known as the content ID. This parameter is required for SPEKE encryption and is not valid for static key encryption.
`roleArn`	string	False	The ARN of the role that you created during setup (when you set up MediaConnect as a trusted entity).
`secretArn`	string	False	The ARN of the secret that you created in AWS Secrets Manager to store the encryption key.
`url`	string	False	The URL from the API Gateway proxy that you set up to talk to your key server. This parameter is required for SPEKE encryption and is not valid for static key encryption.

UpdateFlowOutputRequest

The updates that you want to make to an existing output of an existing flow.

Property	Type	Required	Description
`cidrAllowList`	Array of type string	False	The range of IP addresses that are allowed to initiate output requests to this flow. Format the IP addresses as a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.
`description`	string	False	A description of the output. This description is not visible outside of the current AWS account even if the account grants entitlements to other accounts.
`destination`	string	False	The IP address where you want to send the output.
`encryption`	UpdateEncryption	False	The encryption credentials that you want to use for the output.
`maxLatency`	integer Format: int64	False	The maximum latency in milliseconds. This parameter applies only to RIST-based and Zixi-based streams.
`mediaStreamOutputConfigurations`	Array of type MediaStreamOutputConfigurationRequest	False	The configuration for each media stream that is associated with the output.
`minLatency`	integer Format: int64	False	The minimum latency in milliseconds for SRT-based streams. In streams that use the SRT protocol, this value that you set on your MediaConnect source or output represents the minimal potential latency of that connection. The latency of the stream is set to the highest number between the sender’s minimum latency and the receiver’s minimum latency.
`outputStatus`	string Values: `ENABLED \| DISABLED`	False	An indication of whether the output should transmit data or not. If you don't specify the outputStatus field in your request, MediaConnect leaves the value unchanged.
`port`	integer	False	The port to use when MediaConnect distributes content to the output.
`protocol`	string Values: `zixi-push \| rtp-fec \| rtp \| zixi-pull \| rist \| st2110-jpegxs \| cdi \| srt-listener \| srt-caller \| udp`	False	The protocol to use for the output.
`remoteId`	string	False	The identifier that is assigned to the Zixi receiver. This parameter applies only to outputs that use Zixi pull.
`senderControlPort`	integer Format: int32	False	The port that the flow uses to send outbound requests to initiate connection with the sender.
`senderIpAddress`	string	False	The IP address that the flow communicates with to initiate connection with the sender.
`smoothingLatency`	integer Format: int64	False	The smoothing latency in milliseconds for RIST, RTP, and RTP-FEC streams.
`streamId`	string	False	The stream ID that you want to use for this transport. This parameter applies only to Zixi and SRT caller-based streams.
`vpcInterfaceAttachment`	VpcInterfaceAttachment	False	The VPC interface that you want to send your output to.

UpdateFlowOutputResponse

The result of a successful UpdateFlowOutput request including the flow ARN and the updated output.

Property	Type	Required	Description
`flowArn`	string	True	The ARN of the flow that is associated with the updated output.
`output`	Output	True	The new settings of the output that you updated.

VpcInterfaceAttachment

The VPC interface that you want to send your output to.

Property	Type	Required	Description
`vpcInterfaceName`	string	False	The name of the VPC interface that you want to send your output to.