Note:

You are viewing the documentation for an older major version of the AWS CLI (version 1).

AWS CLI version 2, the latest major version of AWS CLI, is now stable and recommended for general use. To view this page for the AWS CLI version 2, click here. For more information see the AWS CLI version 2 installation instructions and migration guide.

[ aws . codepipeline ]

poll-for-jobs¶

Description¶

Returns information about any jobs for CodePipeline to act on. PollForJobs is valid only for action types with "Custom" in the owner field. If the action type contains AWS or ThirdParty in the owner field, the PollForJobs action returns an error.

Warning

When this API is called, CodePipeline returns temporary credentials for the S3 bucket used to store artifacts for the pipeline, if the action requires access to that S3 bucket for input or output artifacts. This API also returns any secret values defined for the action.

Synopsis¶

  poll-for-jobs
--action-type-id <value>
[--max-batch-size <value>]
[--query-param <value>]
[--cli-input-json <value>]
[--generate-cli-skeleton <value>]
[--debug]
[--endpoint-url <value>]
[--no-verify-ssl]
[--no-paginate]
[--output <value>]
[--query <value>]
[--profile <value>]
[--region <value>]
[--version <value>]
[--color <value>]
[--no-sign-request]
[--ca-bundle <value>]
[--cli-read-timeout <value>]
[--cli-connect-timeout <value>]

Options¶

--action-type-id (structure)

Represents information about an action type.

category -> (string)

A category defines what kind of action can be taken in the stage, and constrains the provider type for the action. Valid categories are limited to one of the following values.

Source

Build

Test

Deploy

Invoke

Approval

Compute

owner -> (string)

The creator of the action being called. There are three valid values for the Owner field in the action category section within your pipeline structure: AWS , ThirdParty , and Custom . For more information, see Valid Action Types and Providers in CodePipeline .

provider -> (string)

The provider of the service being called by the action. Valid providers are determined by the action category. For example, an action in the Deploy category type might have a provider of CodeDeploy, which would be specified as CodeDeploy . For more information, see Valid Action Types and Providers in CodePipeline .

version -> (string)

A string that describes the action version.

Shorthand Syntax:

category=string,owner=string,provider=string,version=string

JSON Syntax:

{
  "category": "Source"|"Build"|"Deploy"|"Test"|"Invoke"|"Approval"|"Compute",
  "owner": "AWS"|"ThirdParty"|"Custom",
  "provider": "string",
  "version": "string"
}

--max-batch-size (integer)

The maximum number of jobs to return in a poll for jobs call.

--query-param (map)

A map of property names and values. For an action type with no queryable properties, this value must be null or an empty map. For an action type with a queryable property, you must supply that property as a key in the map. Only jobs whose action configuration matches the mapped value are returned.

key -> (string)

value -> (string)

Shorthand Syntax:

KeyName1=string,KeyName2=string

JSON Syntax:

{"string": "string"
  ...}

--cli-input-json (string) Performs service operation based on the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, the CLI values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

Global Options¶

--debug (boolean)

Turn on debug logging.

--endpoint-url (string)

Override command's default URL with the given URL.

--no-verify-ssl (boolean)

By default, the AWS CLI uses SSL when communicating with AWS services. For each SSL connection, the AWS CLI will verify SSL certificates. This option overrides the default behavior of verifying SSL certificates.

--no-paginate (boolean)

Disable automatic pagination. If automatic pagination is disabled, the AWS CLI will only make one call, for the first page of results.

--output (string)

The formatting style for command output.

json
text
table

--query (string)

A JMESPath query to use in filtering the response data.

--profile (string)

Use a specific profile from your credential file.

--region (string)

The region to use. Overrides config/env settings.

--version (string)

Display the version of this tool.

--color (string)

Turn on/off color output.

on
off
auto

--no-sign-request (boolean)

Do not sign requests. Credentials will not be loaded if this argument is provided.

--ca-bundle (string)

The CA certificate bundle to use when verifying SSL certificates. Overrides config/env settings.

--cli-read-timeout (int)

The maximum socket read time in seconds. If the value is set to 0, the socket read will be blocking and not timeout. The default value is 60 seconds.

--cli-connect-timeout (int)

The maximum socket connect time in seconds. If the value is set to 0, the socket connect will be blocking and not timeout. The default value is 60 seconds.

Examples¶

Note

To use the following examples, you must have the AWS CLI installed and configured. See the Getting started guide in the AWS CLI User Guide for more information.

Unless otherwise stated, all examples have unix-like quotation rules. These examples will need to be adapted to your terminal's quoting rules. See Using quotation marks with strings in the AWS CLI User Guide .

To view any available jobs

This example returns information about any jobs for a job worker to act upon. This example uses a pre-defined JSON file (MyActionTypeInfo.json) to supply information about the action type for which the job worker processes jobs. This command is only used for custom actions. When this command is called, AWS CodePipeline returns temporary credentials for the Amazon S3 bucket used to store artifacts for the pipeline. This command will also return any secret values defined for the action, if any are defined.

Command:

aws codepipeline poll-for-jobs --cli-input-json file://MyActionTypeInfo.json

JSON file sample contents:

{
  "actionTypeId": {
    "category": "Test",
    "owner": "Custom",
    "provider": "MyJenkinsProviderName",
    "version": "1"
  },
  "maxBatchSize": 5,
  "queryParam": {
      "ProjectName": "MyJenkinsTestProject"
  }
}

Output:

{
 "jobs": [
  {
    "accountId": "111111111111",
    "data": {
      "actionConfiguration": {
        "__type": "ActionConfiguration",
        "configuration": {
          "ProjectName": "MyJenkinsExampleTestProject"
        }
      },
      "actionTypeId": {
        "__type": "ActionTypeId",
        "category": "Test",
        "owner": "Custom",
        "provider": "MyJenkinsProviderName",
        "version": "1"
      },
      "artifactCredentials": {
        "__type": "AWSSessionCredentials",
        "accessKeyId": "AKIAIOSFODNN7EXAMPLE",
        "secretAccessKey": "wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY",
        "sessionToken": "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"
      },
      "inputArtifacts": [
        {
          "__type": "Artifact",
          "location": {
            "s3Location": {
              "bucketName": "codepipeline-us-east-1-11EXAMPLE11",
              "objectKey": "MySecondPipeline/MyAppBuild/EXAMPLE"
            },
            "type": "S3"
          },
          "name": "MyAppBuild"
        }
      ],
      "outputArtifacts": [],
      "pipelineContext": {
        "__type": "PipelineContext",
        "action": {
          "name": "MyJenkinsTest-Action"
        },
        "pipelineName": "MySecondPipeline",
        "stage": {
          "name": "Testing"
        }
      }
    },
    "id": "ef66c259-64f9-EXAMPLE",
    "nonce": "3"
  }
 ]
}

Output¶

jobs -> (list)

Information about the jobs to take action on.

(structure)

Represents information about a job.

id -> (string)

The unique system-generated ID of the job.

data -> (structure)

Other data about a job.

actionTypeId -> (structure)

Represents information about an action type.

category -> (string)

A category defines what kind of action can be taken in the stage, and constrains the provider type for the action. Valid categories are limited to one of the following values.

Source

Build

Test

Deploy

Invoke

Approval

Compute

owner -> (string)

The creator of the action being called. There are three valid values for the Owner field in the action category section within your pipeline structure: AWS , ThirdParty , and Custom . For more information, see Valid Action Types and Providers in CodePipeline .

provider -> (string)

The provider of the service being called by the action. Valid providers are determined by the action category. For example, an action in the Deploy category type might have a provider of CodeDeploy, which would be specified as CodeDeploy . For more information, see Valid Action Types and Providers in CodePipeline .

version -> (string)

A string that describes the action version.

actionConfiguration -> (structure)

Represents information about an action configuration.

configuration -> (map)

The configuration data for the action.

key -> (string)

value -> (string)

pipelineContext -> (structure)

Represents information about a pipeline to a job worker.

Note
Includes pipelineArn and pipelineExecutionId for custom jobs.

pipelineName -> (string)

The name of the pipeline. This is a user-specified value. Pipeline names must be unique across all pipeline names under an Amazon Web Services account.

stage -> (structure)

The stage of the pipeline.

name -> (string)

The name of the stage.

action -> (structure)

The context of an action to a job worker in the stage of a pipeline.

name -> (string)

The name of the action in the context of a job.

actionExecutionId -> (string)

The system-generated unique ID that corresponds to an action's execution.

pipelineArn -> (string)

The Amazon Resource Name (ARN) of the pipeline.

pipelineExecutionId -> (string)

The execution ID of the pipeline.

inputArtifacts -> (list)

The artifact supplied to the job.

(structure)

Artifacts are the files that are worked on by actions in the pipeline. See the action configuration for each action for details about artifact parameters. For example, the S3 source action artifact is a file name (or file path), and the files are generally provided as a ZIP file. Example artifact name: SampleApp_Windows.zip

name -> (string)

The artifact's name.

revision -> (string)

The artifact's revision ID. Depending on the type of object, this could be a commit ID (GitHub) or a revision ID (Amazon S3).

location -> (structure)

The location of an artifact.

type -> (string)

The type of artifact in the location.

s3Location -> (structure)

The S3 bucket that contains the artifact.

bucketName -> (string)

The name of the S3 bucket.

objectKey -> (string)

The key of the object in the S3 bucket, which uniquely identifies the object in the bucket.

outputArtifacts -> (list)

The output of the job.

(structure)

Artifacts are the files that are worked on by actions in the pipeline. See the action configuration for each action for details about artifact parameters. For example, the S3 source action artifact is a file name (or file path), and the files are generally provided as a ZIP file. Example artifact name: SampleApp_Windows.zip

name -> (string)

The artifact's name.

revision -> (string)

The artifact's revision ID. Depending on the type of object, this could be a commit ID (GitHub) or a revision ID (Amazon S3).

location -> (structure)

The location of an artifact.

type -> (string)

The type of artifact in the location.

s3Location -> (structure)

The S3 bucket that contains the artifact.

bucketName -> (string)

The name of the S3 bucket.

objectKey -> (string)

The key of the object in the S3 bucket, which uniquely identifies the object in the bucket.

artifactCredentials -> (structure)

Represents an Amazon Web Services session credentials object. These credentials are temporary credentials that are issued by Amazon Web Services Secure Token Service (STS). They can be used to access input and output artifacts in the S3 bucket used to store artifacts for the pipeline in CodePipeline.

accessKeyId -> (string)

The access key for the session.

secretAccessKey -> (string)

The secret access key for the session.

sessionToken -> (string)

The token for the session.

continuationToken -> (string)

A system-generated token, such as a deployment ID, required by a job to continue the job asynchronously.

encryptionKey -> (structure)

Represents information about the key used to encrypt data in the artifact store, such as an KMS key.

id -> (string)

The ID used to identify the key. For an Amazon Web Services KMS key, you can use the key ID, the key ARN, or the alias ARN.

Note
Aliases are recognized only in the account that created the KMS key. For cross-account actions, you can only use the key ID or key ARN to identify the key. Cross-account actions involve using the role from the other account (AccountB), so specifying the key ID will use the key from the other account (AccountB).

type -> (string)

The type of encryption key, such as an Amazon Web Services KMS key. When creating or updating a pipeline, the value must be set to 'KMS'.

nonce -> (string)

A system-generated random number that CodePipeline uses to ensure that the job is being worked on by only one job worker. Use this number in an AcknowledgeJob request.

accountId -> (string)

The ID of the Amazon Web Services account to use when performing the job.

Table Of Contents

Feedback

User Guide

Note:

poll-for-jobs¶

Description¶

Warning

Synopsis¶

Options¶

Global Options¶

Examples¶

Note

Output¶

Note

Note