Note:

You are viewing the documentation for an older major version of the AWS CLI (version 1).

AWS CLI version 2, the latest major version of AWS CLI, is now stable and recommended for general use. To view this page for the AWS CLI version 2, click here. For more information see the AWS CLI version 2 installation instructions and migration guide.

[ aws . ec2 ]

delete-ipam-pool¶

Description¶

Delete an IPAM pool.

Note

You cannot delete an IPAM pool if there are allocations in it or CIDRs provisioned to it. To release allocations, see ReleaseIpamPoolAllocation . To deprovision pool CIDRs, see DeprovisionIpamPoolCidr .

For more information, see Delete a pool in the Amazon VPC IPAM User Guide .

Synopsis¶

  delete-ipam-pool
[--dry-run | --no-dry-run]
--ipam-pool-id <value>
[--cascade | --no-cascade]
[--cli-input-json <value>]
[--generate-cli-skeleton <value>]
[--debug]
[--endpoint-url <value>]
[--no-verify-ssl]
[--no-paginate]
[--output <value>]
[--query <value>]
[--profile <value>]
[--region <value>]
[--version <value>]
[--color <value>]
[--no-sign-request]
[--ca-bundle <value>]
[--cli-read-timeout <value>]
[--cli-connect-timeout <value>]

Options¶

--dry-run | --no-dry-run (boolean)

A check for whether you have the required permissions for the action without actually making the request and provides an error response. If you have the required permissions, the error response is DryRunOperation . Otherwise, it is UnauthorizedOperation .

--ipam-pool-id (string)

The ID of the pool to delete.

--cascade | --no-cascade (boolean)

Enables you to quickly delete an IPAM pool and all resources within that pool, including provisioned CIDRs, allocations, and other pools.

Warning
You can only use this option to delete pools in the private scope or pools in the public scope with a source resource. A source resource is a resource used to provision CIDRs to a resource planning pool.

--cli-input-json (string) Performs service operation based on the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, the CLI values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

Global Options¶

--debug (boolean)

Turn on debug logging.

--endpoint-url (string)

Override command's default URL with the given URL.

--no-verify-ssl (boolean)

By default, the AWS CLI uses SSL when communicating with AWS services. For each SSL connection, the AWS CLI will verify SSL certificates. This option overrides the default behavior of verifying SSL certificates.

--no-paginate (boolean)

Disable automatic pagination. If automatic pagination is disabled, the AWS CLI will only make one call, for the first page of results.

--output (string)

The formatting style for command output.

json
text
table

--query (string)

A JMESPath query to use in filtering the response data.

--profile (string)

Use a specific profile from your credential file.

--region (string)

The region to use. Overrides config/env settings.

--version (string)

Display the version of this tool.

--color (string)

Turn on/off color output.

on
off
auto

--no-sign-request (boolean)

Do not sign requests. Credentials will not be loaded if this argument is provided.

--ca-bundle (string)

The CA certificate bundle to use when verifying SSL certificates. Overrides config/env settings.

--cli-read-timeout (int)

The maximum socket read time in seconds. If the value is set to 0, the socket read will be blocking and not timeout. The default value is 60 seconds.

--cli-connect-timeout (int)

The maximum socket connect time in seconds. If the value is set to 0, the socket connect will be blocking and not timeout. The default value is 60 seconds.

Examples¶

Note

To use the following examples, you must have the AWS CLI installed and configured. See the Getting started guide in the AWS CLI User Guide for more information.

Unless otherwise stated, all examples have unix-like quotation rules. These examples will need to be adapted to your terminal's quoting rules. See Using quotation marks with strings in the AWS CLI User Guide .

To delete an IPAM pool

In this example, you're a IPAM delegated admin who wants to delete an IPAM pool that you no longer need, but the pool has a CIDR provisioned to it. You cannot delete a pool if it has CIDRs provisioned to it unless you use the --cascade option, so you'll use --cascade.

To complete this request:

You'll need the IPAM pool ID which you can get with describe-ipam-pools.
The --region must be the IPAM home Region.

The following delete-ipam-pool example deletes an IPAM pool in your AWS account.

aws ec2 delete-ipam-pool \
    --ipam-pool-id ipam-pool-050c886a3ca41cd5b \
    --cascade \
    --region us-east-1

Output:

{
    "IpamPool": {
        "OwnerId": "320805250157",
        "IpamPoolId": "ipam-pool-050c886a3ca41cd5b",
        "IpamPoolArn": "arn:aws:ec2::320805250157:ipam-pool/ipam-pool-050c886a3ca41cd5b",
        "IpamScopeArn": "arn:aws:ec2::320805250157:ipam-scope/ipam-scope-0a158dde35c51107b",
        "IpamScopeType": "private",
        "IpamArn": "arn:aws:ec2::320805250157:ipam/ipam-005f921c17ebd5107",
        "IpamRegion": "us-east-1",
        "Locale": "None",
        "PoolDepth": 1,
        "State": "delete-in-progress",
        "Description": "example",
        "AutoImport": false,
        "AddressFamily": "ipv4",
        "AllocationMinNetmaskLength": 0,
        "AllocationMaxNetmaskLength": 32
    }
}

For more information, see Delete a pool in the Amazon VPC IPAM User Guide.

Output¶

IpamPool -> (structure)

Information about the results of the deletion.

OwnerId -> (string)

The Amazon Web Services account ID of the owner of the IPAM pool.

IpamPoolId -> (string)

The ID of the IPAM pool.

SourceIpamPoolId -> (string)

The ID of the source IPAM pool. You can use this option to create an IPAM pool within an existing source pool.

IpamPoolArn -> (string)

The Amazon Resource Name (ARN) of the IPAM pool.

IpamScopeArn -> (string)

The ARN of the scope of the IPAM pool.

IpamScopeType -> (string)

In IPAM, a scope is the highest-level container within IPAM. An IPAM contains two default scopes. Each scope represents the IP space for a single network. The private scope is intended for all private IP address space. The public scope is intended for all public IP address space. Scopes enable you to reuse IP addresses across multiple unconnected networks without causing IP address overlap or conflict.

IpamArn -> (string)

The ARN of the IPAM.

IpamRegion -> (string)

The Amazon Web Services Region of the IPAM pool.

Locale -> (string)

The locale of the IPAM pool.

The locale for the pool should be one of the following:

An Amazon Web Services Region where you want this IPAM pool to be available for allocations.

The network border group for an Amazon Web Services Local Zone where you want this IPAM pool to be available for allocations (supported Local Zones ). This option is only available for IPAM IPv4 pools in the public scope.

If you choose an Amazon Web Services Region for locale that has not been configured as an operating Region for the IPAM, you'll get an error.

PoolDepth -> (integer)

The depth of pools in your IPAM pool. The pool depth quota is 10. For more information, see Quotas in IPAM in the Amazon VPC IPAM User Guide .

State -> (string)

The state of the IPAM pool.

StateMessage -> (string)

The state message.

Description -> (string)

The description of the IPAM pool.

AutoImport -> (boolean)

If selected, IPAM will continuously look for resources within the CIDR range of this pool and automatically import them as allocations into your IPAM. The CIDRs that will be allocated for these resources must not already be allocated to other resources in order for the import to succeed. IPAM will import a CIDR regardless of its compliance with the pool's allocation rules, so a resource might be imported and subsequently marked as noncompliant. If IPAM discovers multiple CIDRs that overlap, IPAM will import the largest CIDR only. If IPAM discovers multiple CIDRs with matching CIDRs, IPAM will randomly import one of them only.

A locale must be set on the pool for this feature to work.

PubliclyAdvertisable -> (boolean)

Determines if a pool is publicly advertisable. This option is not available for pools with AddressFamily set to ipv4 .

AddressFamily -> (string)

The address family of the pool.

AllocationMinNetmaskLength -> (integer)

The minimum netmask length required for CIDR allocations in this IPAM pool to be compliant. The minimum netmask length must be less than the maximum netmask length. Possible netmask lengths for IPv4 addresses are 0 - 32. Possible netmask lengths for IPv6 addresses are 0 - 128.

AllocationMaxNetmaskLength -> (integer)

The maximum netmask length possible for CIDR allocations in this IPAM pool to be compliant. The maximum netmask length must be greater than the minimum netmask length. Possible netmask lengths for IPv4 addresses are 0 - 32. Possible netmask lengths for IPv6 addresses are 0 - 128.

AllocationDefaultNetmaskLength -> (integer)

The default netmask length for allocations added to this pool. If, for example, the CIDR assigned to this pool is 10.0.0.0/8 and you enter 16 here, new allocations will default to 10.0.0.0/16.

AllocationResourceTags -> (list)

Tags that are required for resources that use CIDRs from this IPAM pool. Resources that do not have these tags will not be allowed to allocate space from the pool. If the resources have their tags changed after they have allocated space or if the allocation tagging requirements are changed on the pool, the resource may be marked as noncompliant.

(structure)

The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA , specify tag:Owner for the filter name and TeamA for the filter value.

Key -> (string)

The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.

Value -> (string)

The value of the tag.

Tags -> (list)

The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA , specify tag:Owner for the filter name and TeamA for the filter value.

(structure)

Describes a tag.

Key -> (string)

The key of the tag.

Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws: .

Value -> (string)

The value of the tag.

Constraints: Tag values are case-sensitive and accept a maximum of 256 Unicode characters.

AwsService -> (string)

Limits which service in Amazon Web Services that the pool can be used in. "ec2", for example, allows users to use space for Elastic IP addresses and VPCs.

PublicIpSource -> (string)

The IP address source for pools in the public scope. Only used for provisioning IP address CIDRs to pools in the public scope. Default is BYOIP . For more information, see Create IPv6 pools in the Amazon VPC IPAM User Guide . By default, you can add only one Amazon-provided IPv6 CIDR block to a top-level IPv6 pool. For information on increasing the default limit, see Quotas for your IPAM in the Amazon VPC IPAM User Guide .

SourceResource -> (structure)

The resource used to provision CIDRs to a resource planning pool.

ResourceId -> (string)

The source resource ID.

ResourceType -> (string)

The source resource type.

ResourceRegion -> (string)

The source resource Region.

ResourceOwner -> (string)

The source resource owner.

Table Of Contents

Feedback

User Guide

Note:

delete-ipam-pool¶

Description¶

Note

Synopsis¶

Options¶

Warning

Global Options¶

Examples¶

Note

Output¶