AWS CLI Command Reference

Note:

You are viewing the documentation for an older major version of the AWS CLI (version 1).

AWS CLI version 2, the latest major version of AWS CLI, is now stable and recommended for general use. To view this page for the AWS CLI version 2, click here. For more information see the AWS CLI version 2 installation instructions and migration guide.

[ aws . location ]

calculate-route

Description

Calculates a route given the following required parameters: DeparturePosition and DestinationPosition . Requires that you first create a route calculator resource .

By default, a request that doesn't specify a departure time uses the best time of day to travel with the best traffic conditions when calculating the route.

Additional options include:

  • Specifying a departure time using either DepartureTime or DepartNow . This calculates a route based on predictive traffic data at the given time.

Note

You can't specify both DepartureTime and DepartNow in a single request. Specifying both parameters returns a validation error.
  • Specifying a travel mode using TravelMode sets the transportation mode used to calculate the routes. This also lets you specify additional route preferences in CarModeOptions if traveling by Car , or TruckModeOptions if traveling by Truck .

Note

If you specify walking for the travel mode and your data provider is Esri, the start and destination must be within 40km.

See also: AWS API Documentation

Synopsis

  calculate-route
--calculator-name <value>
--departure-position <value>
--destination-position <value>
[--waypoint-positions <value>]
[--travel-mode <value>]
[--departure-time <value>]
[--depart-now | --no-depart-now]
[--distance-unit <value>]
[--include-leg-geometry | --no-include-leg-geometry]
[--car-mode-options <value>]
[--truck-mode-options <value>]
[--arrival-time <value>]
[--optimize-for <value>]
[--key <value>]
[--cli-input-json <value>]
[--generate-cli-skeleton <value>]
[--debug]
[--endpoint-url <value>]
[--no-verify-ssl]
[--no-paginate]
[--output <value>]
[--query <value>]
[--profile <value>]
[--region <value>]
[--version <value>]
[--color <value>]
[--no-sign-request]
[--ca-bundle <value>]
[--cli-read-timeout <value>]
[--cli-connect-timeout <value>]

Options

--calculator-name (string)

The name of the route calculator resource that you want to use to calculate the route.

--departure-position (list)

The start position for the route. Defined in World Geodetic System (WGS 84) format: [longitude, latitude] .

  • For example, [-123.115, 49.285]

Note

If you specify a departure that's not located on a road, Amazon Location moves the position to the nearest road . If Esri is the provider for your route calculator, specifying a route that is longer than 400 km returns a 400 RoutesValidationException error.

Valid Values: [-180 to 180,-90 to 90]

(double)

Syntax:

double double ...

--destination-position (list)

The finish position for the route. Defined in World Geodetic System (WGS 84) format: [longitude, latitude] .

  • For example, [-122.339, 47.615]

Note

If you specify a destination that's not located on a road, Amazon Location moves the position to the nearest road .

Valid Values: [-180 to 180,-90 to 90]

(double)

Syntax:

double double ...

--waypoint-positions (list)

Specifies an ordered list of up to 23 intermediate positions to include along a route between the departure position and destination position.

  • For example, from the DeparturePosition [-123.115, 49.285] , the route follows the order that the waypoint positions are given [[-122.757, 49.0021],[-122.349, 47.620]]

Note

If you specify a waypoint position that's not located on a road, Amazon Location moves the position to the nearest road .

Specifying more than 23 waypoints returns a 400 ValidationException error.

If Esri is the provider for your route calculator, specifying a route that is longer than 400 km returns a 400 RoutesValidationException error.

Valid Values: [-180 to 180,-90 to 90]

(list)

(double)

Shorthand Syntax:

double,double ...

JSON Syntax:

[
  [double, ...]
  ...
]

--travel-mode (string)

Specifies the mode of transport when calculating a route. Used in estimating the speed of travel and road compatibility. You can choose Car , Truck , Walking , Bicycle or Motorcycle as options for the TravelMode .

Note

Bicycle and Motorcycle are only valid when using Grab as a data provider, and only within Southeast Asia.

Truck is not available for Grab.

For more details on the using Grab for routing, including areas of coverage, see GrabMaps in the Amazon Location Service Developer Guide .

The TravelMode you specify also determines how you specify route preferences:

  • If traveling by Car use the CarModeOptions parameter.
  • If traveling by Truck use the TruckModeOptions parameter.

Default Value: Car

Possible values:

  • Car
  • Truck
  • Walking
  • Bicycle
  • Motorcycle

--departure-time (timestamp)

Specifies the desired time of departure. Uses the given time to calculate the route. Otherwise, the best time of day to travel with the best traffic conditions is used to calculate the route.

  • In ISO 8601 format: YYYY-MM-DDThh:mm:ss.sssZ . For example, 2020–07-2T12:15:20.000Z+01:00

--depart-now | --no-depart-now (boolean)

Sets the time of departure as the current time. Uses the current time to calculate a route. Otherwise, the best time of day to travel with the best traffic conditions is used to calculate the route.

Default Value: false

Valid Values: false | true

--distance-unit (string)

Set the unit system to specify the distance.

Default Value: Kilometers

Possible values:

  • Kilometers
  • Miles

--include-leg-geometry | --no-include-leg-geometry (boolean)

Set to include the geometry details in the result for each path between a pair of positions.

Default Value: false

Valid Values: false | true

--car-mode-options (structure)

Specifies route preferences when traveling by Car , such as avoiding routes that use ferries or tolls.

Requirements: TravelMode must be specified as Car .

AvoidFerries -> (boolean)

Avoids ferries when calculating routes.

Default Value: false

Valid Values: false | true

AvoidTolls -> (boolean)

Avoids tolls when calculating routes.

Default Value: false

Valid Values: false | true

Shorthand Syntax:

AvoidFerries=boolean,AvoidTolls=boolean

JSON Syntax:

{
  "AvoidFerries": true|false,
  "AvoidTolls": true|false
}

--truck-mode-options (structure)

Specifies route preferences when traveling by Truck , such as avoiding routes that use ferries or tolls, and truck specifications to consider when choosing an optimal road.

Requirements: TravelMode must be specified as Truck .

AvoidFerries -> (boolean)

Avoids ferries when calculating routes.

Default Value: false

Valid Values: false | true

AvoidTolls -> (boolean)

Avoids tolls when calculating routes.

Default Value: false

Valid Values: false | true

Dimensions -> (structure)

Specifies the truck's dimension specifications including length, height, width, and unit of measurement. Used to avoid roads that can't support the truck's dimensions.

Length -> (double)

The length of the truck.

  • For example, 15.5 .

Note

For routes calculated with a HERE resource, this value must be between 0 and 300 meters.

Height -> (double)

The height of the truck.

  • For example, 4.5 .

Note

For routes calculated with a HERE resource, this value must be between 0 and 50 meters.

Width -> (double)

The width of the truck.

  • For example, 4.5 .

Note

For routes calculated with a HERE resource, this value must be between 0 and 50 meters.

Unit -> (string)

Specifies the unit of measurement for the truck dimensions.

Default Value: Meters

Weight -> (structure)

Specifies the truck's weight specifications including total weight and unit of measurement. Used to avoid roads that can't support the truck's weight.

Total -> (double)

The total weight of the truck.

  • For example, 3500 .

Unit -> (string)

The unit of measurement to use for the truck weight.

Default Value: Kilograms

Shorthand Syntax:

AvoidFerries=boolean,AvoidTolls=boolean,Dimensions={Length=double,Height=double,Width=double,Unit=string},Weight={Total=double,Unit=string}

JSON Syntax:

{
  "AvoidFerries": true|false,
  "AvoidTolls": true|false,
  "Dimensions": {
    "Length": double,
    "Height": double,
    "Width": double,
    "Unit": "Meters"|"Feet"
  },
  "Weight": {
    "Total": double,
    "Unit": "Kilograms"|"Pounds"
  }
}

--arrival-time (timestamp)

Specifies the desired time of arrival. Uses the given time to calculate the route. Otherwise, the best time of day to travel with the best traffic conditions is used to calculate the route.

Note

ArrivalTime is not supported Esri.

--optimize-for (string)

Specifies the distance to optimize for when calculating a route.

Possible values:

  • FastestRoute
  • ShortestRoute

--key (string)

The optional API key to authorize the request.

--cli-input-json (string) Performs service operation based on the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, the CLI values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

Global Options

--debug (boolean)

Turn on debug logging.

--endpoint-url (string)

Override command's default URL with the given URL.

--no-verify-ssl (boolean)

By default, the AWS CLI uses SSL when communicating with AWS services. For each SSL connection, the AWS CLI will verify SSL certificates. This option overrides the default behavior of verifying SSL certificates.

--no-paginate (boolean)

Disable automatic pagination. If automatic pagination is disabled, the AWS CLI will only make one call, for the first page of results.

--output (string)

The formatting style for command output.

  • json
  • text
  • table

--query (string)

A JMESPath query to use in filtering the response data.

--profile (string)

Use a specific profile from your credential file.

--region (string)

The region to use. Overrides config/env settings.

--version (string)

Display the version of this tool.

--color (string)

Turn on/off color output.

  • on
  • off
  • auto

--no-sign-request (boolean)

Do not sign requests. Credentials will not be loaded if this argument is provided.

--ca-bundle (string)

The CA certificate bundle to use when verifying SSL certificates. Overrides config/env settings.

--cli-read-timeout (int)

The maximum socket read time in seconds. If the value is set to 0, the socket read will be blocking and not timeout. The default value is 60 seconds.

--cli-connect-timeout (int)

The maximum socket connect time in seconds. If the value is set to 0, the socket connect will be blocking and not timeout. The default value is 60 seconds.

Output

Legs -> (list)

Contains details about each path between a pair of positions included along a route such as: StartPosition , EndPosition , Distance , DurationSeconds , Geometry , and Steps . The number of legs returned corresponds to one fewer than the total number of positions in the request.

For example, a route with a departure position and destination position returns one leg with the positions snapped to a nearby road :

  • The StartPosition is the departure position.
  • The EndPosition is the destination position.

A route with a waypoint between the departure and destination position returns two legs with the positions snapped to a nearby road:

  • Leg 1: The StartPosition is the departure position . The EndPosition is the waypoint positon.
  • Leg 2: The StartPosition is the waypoint position. The EndPosition is the destination position.

(structure)

Contains the calculated route's details for each path between a pair of positions. The number of legs returned corresponds to one fewer than the total number of positions in the request.

For example, a route with a departure position and destination position returns one leg with the positions snapped to a nearby road :

  • The StartPosition is the departure position.
  • The EndPosition is the destination position.

A route with a waypoint between the departure and destination position returns two legs with the positions snapped to a nearby road:

  • Leg 1: The StartPosition is the departure position . The EndPosition is the waypoint positon.
  • Leg 2: The StartPosition is the waypoint position. The EndPosition is the destination position.

StartPosition -> (list)

The starting position of the leg. Follows the format [longitude,latitude] .

Note

If the StartPosition isn't located on a road, it's snapped to a nearby road .

(double)

EndPosition -> (list)

The terminating position of the leg. Follows the format [longitude,latitude] .

Note

If the EndPosition isn't located on a road, it's snapped to a nearby road .

(double)

Distance -> (double)

The distance between the leg's StartPosition and EndPosition along a calculated route.

  • The default measurement is Kilometers unless the request specifies a DistanceUnit of Miles .

DurationSeconds -> (double)

The estimated travel time between the leg's StartPosition and EndPosition . The travel mode and departure time that you specify in the request determines the calculated time.

Geometry -> (structure)

Contains the calculated route's path as a linestring geometry.

LineString -> (list)

An ordered list of positions used to plot a route on a map.

The first position is closest to the start position for the leg, and the last position is the closest to the end position for the leg.

  • For example, [[-123.117, 49.284],[-123.115, 49.285],[-123.115, 49.285]]

(list)

(double)

Steps -> (list)

Contains a list of steps, which represent subsections of a leg. Each step provides instructions for how to move to the next step in the leg such as the step's start position, end position, travel distance, travel duration, and geometry offset.

(structure)

Represents an element of a leg within a route. A step contains instructions for how to move to the next step in the leg.

StartPosition -> (list)

The starting position of a step. If the position is the first step in the leg, this position is the same as the start position of the leg.

(double)

EndPosition -> (list)

The end position of a step. If the position the last step in the leg, this position is the same as the end position of the leg.

(double)

Distance -> (double)

The travel distance between the step's StartPosition and EndPosition .

DurationSeconds -> (double)

The estimated travel time, in seconds, from the step's StartPosition to the EndPosition . . The travel mode and departure time that you specify in the request determines the calculated time.

GeometryOffset -> (integer)

Represents the start position, or index, in a sequence of steps within the leg's line string geometry. For example, the index of the first step in a leg geometry is 0 .

Included in the response for queries that set IncludeLegGeometry to True .

Summary -> (structure)

Contains information about the whole route, such as: RouteBBox , DataSource , Distance , DistanceUnit , and DurationSeconds .

RouteBBox -> (list)

Specifies a geographical box surrounding a route. Used to zoom into a route when displaying it in a map. For example, [min x, min y, max x, max y] .

The first 2 bbox parameters describe the lower southwest corner:

  • The first bbox position is the X coordinate or longitude of the lower southwest corner.
  • The second bbox position is the Y coordinate or latitude of the lower southwest corner.

The next 2 bbox parameters describe the upper northeast corner:

  • The third bbox position is the X coordinate, or longitude of the upper northeast corner.
  • The fourth bbox position is the Y coordinate, or latitude of the upper northeast corner.

(double)

DataSource -> (string)

The data provider of traffic and road network data used to calculate the route. Indicates one of the available providers:

  • Esri
  • Grab
  • Here

For more information about data providers, see Amazon Location Service data providers .

Distance -> (double)

The total distance covered by the route. The sum of the distance travelled between every stop on the route.

Note

If Esri is the data source for the route calculator, the route distance can’t be greater than 400 km. If the route exceeds 400 km, the response is a 400 RoutesValidationException error.

DurationSeconds -> (double)

The total travel time for the route measured in seconds. The sum of the travel time between every stop on the route.

DistanceUnit -> (string)

The unit of measurement for route distances.