Note:

You are viewing the documentation for an older major version of the AWS CLI (version 1).

AWS CLI version 2, the latest major version of AWS CLI, is now stable and recommended for general use. To view this page for the AWS CLI version 2, click here. For more information see the AWS CLI version 2 installation instructions and migration guide.

[ aws . route53resolver ]

update-resolver-rule¶

Description¶

Updates settings for a specified Resolver rule. ResolverRuleId is required, and all other parameters are optional. If you don't specify a parameter, it retains its current value.

Synopsis¶

  update-resolver-rule
--resolver-rule-id <value>
--config <value>
[--cli-input-json <value>]
[--generate-cli-skeleton <value>]
[--debug]
[--endpoint-url <value>]
[--no-verify-ssl]
[--no-paginate]
[--output <value>]
[--query <value>]
[--profile <value>]
[--region <value>]
[--version <value>]
[--color <value>]
[--no-sign-request]
[--ca-bundle <value>]
[--cli-read-timeout <value>]
[--cli-connect-timeout <value>]

Options¶

--resolver-rule-id (string)

The ID of the Resolver rule that you want to update.

--config (structure)

The new settings for the Resolver rule.

Name -> (string)

The new name for the Resolver rule. The name that you specify appears in the Resolver dashboard in the Route 53 console.

TargetIps -> (list)

For DNS queries that originate in your VPC, the new IP addresses that you want to route outbound DNS queries to.

(structure)

In a CreateResolverRule request, an array of the IPs that you want to forward DNS queries to.

Ip -> (string)

One IPv4 address that you want to forward DNS queries to.

Port -> (integer)

The port at Ip that you want to forward DNS queries to.

Ipv6 -> (string)

One IPv6 address that you want to forward DNS queries to.

Protocol -> (string)

The protocols for the target address. The protocol you choose needs to be supported by the outbound endpoint of the Resolver rule.

ServerNameIndication -> (string)

The Server Name Indication of the DoH server that you want to forward queries to. This is only used if the Protocol of the TargetAddress is DoH .

ResolverEndpointId -> (string)

The ID of the new outbound Resolver endpoint that you want to use to route DNS queries to the IP addresses that you specify in TargetIps .

Shorthand Syntax:

Name=string,TargetIps=[{Ip=string,Port=integer,Ipv6=string,Protocol=string,ServerNameIndication=string},{Ip=string,Port=integer,Ipv6=string,Protocol=string,ServerNameIndication=string}],ResolverEndpointId=string

JSON Syntax:

{
  "Name": "string",
  "TargetIps": [
    {
      "Ip": "string",
      "Port": integer,
      "Ipv6": "string",
      "Protocol": "DoH"|"Do53"|"DoH-FIPS",
      "ServerNameIndication": "string"
    }
    ...
  ],
  "ResolverEndpointId": "string"
}

--cli-input-json (string) Performs service operation based on the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, the CLI values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

Global Options¶

--debug (boolean)

Turn on debug logging.

--endpoint-url (string)

Override command's default URL with the given URL.

--no-verify-ssl (boolean)

By default, the AWS CLI uses SSL when communicating with AWS services. For each SSL connection, the AWS CLI will verify SSL certificates. This option overrides the default behavior of verifying SSL certificates.

--no-paginate (boolean)

Disable automatic pagination. If automatic pagination is disabled, the AWS CLI will only make one call, for the first page of results.

--output (string)

The formatting style for command output.

json
text
table

--query (string)

A JMESPath query to use in filtering the response data.

--profile (string)

Use a specific profile from your credential file.

--region (string)

The region to use. Overrides config/env settings.

--version (string)

Display the version of this tool.

--color (string)

Turn on/off color output.

on
off
auto

--no-sign-request (boolean)

Do not sign requests. Credentials will not be loaded if this argument is provided.

--ca-bundle (string)

The CA certificate bundle to use when verifying SSL certificates. Overrides config/env settings.

--cli-read-timeout (int)

The maximum socket read time in seconds. If the value is set to 0, the socket read will be blocking and not timeout. The default value is 60 seconds.

--cli-connect-timeout (int)

The maximum socket connect time in seconds. If the value is set to 0, the socket connect will be blocking and not timeout. The default value is 60 seconds.

Examples¶

Note

To use the following examples, you must have the AWS CLI installed and configured. See the Getting started guide in the AWS CLI User Guide for more information.

Unless otherwise stated, all examples have unix-like quotation rules. These examples will need to be adapted to your terminal's quoting rules. See Using quotation marks with strings in the AWS CLI User Guide .

Example 1: To update settings Resolver endpoint

The following update-resolver-rule example updates the name of the rule, the IP addresses on your on-premises network that DNS queries are forwarded to, and the ID of the outbound Resolver endpoint that you're using to forward queries to your network.

Note Existing values for TargetIps are overwritten, so you must specify all the IP addresses that you want the rule to have after the update.

aws route53resolver update-resolver-rule \
    --resolver-rule-id rslvr-rr-1247fa64f3example \
    --config Name="my-2nd-rule",TargetIps=[{Ip=192.0.2.45,Port=53},{Ip=192.0.2.46,Port=53}],ResolverEndpointId=rslvr-out-7b89ed0d25example

Output:

{
    "ResolverRule": {
        "Id": "rslvr-rr-1247fa64f3example",
        "CreatorRequestId": "2020-01-02-18:47",
        "Arn": "arn:aws:route53resolver:us-west-2:111122223333:resolver-rule/rslvr-rr-1247fa64f3example",
        "DomainName": "www.example.com.",
        "Status": "COMPLETE",
        "StatusMessage": "[Trace id: 1-5dcc90b9-8a8ee860aba1ebd89example] Successfully updated Resolver Rule.",
        "RuleType": "FORWARD",
        "Name": "my-2nd-rule",
        "TargetIps": [
            {
                "Ip": "192.0.2.45",
                "Port": 53
            },
            {
                "Ip": "192.0.2.46",
                "Port": 53
            }
        ],
        "ResolverEndpointId": "rslvr-out-7b89ed0d25example",
        "OwnerId": "111122223333",
        "ShareStatus": "NOT_SHARED"
    }
}

Example 2: To update settings Resolver endpoint using a file for ``config`` settings

You can alternatively include the config settings in a JSON file and then specify that file when you call update-resolver-rule.

aws route53resolver update-resolver-rule \
    --resolver-rule-id rslvr-rr-1247fa64f3example \
    --config file://c:\temp\update-resolver-rule.json

Contents of update-resolver-rule.json.

{
    "Name": "my-2nd-rule",
    "TargetIps": [
        {
            "Ip": "192.0.2.45",
            "Port": 53
        },
        {
            "Ip": "192.0.2.46",
            "Port": 53
        }
    ],
    "ResolverEndpointId": "rslvr-out-7b89ed0d25example"
}

For more information, see Values That You Specify When You Create or Edit Rules in the Amazon Route 53 Developer Guide.

Output¶

ResolverRule -> (structure)

The response to an UpdateResolverRule request.

Id -> (string)

The ID that Resolver assigned to the Resolver rule when you created it.

CreatorRequestId -> (string)

A unique string that you specified when you created the Resolver rule. CreatorRequestId identifies the request and allows failed requests to be retried without the risk of running the operation twice.

Arn -> (string)

The ARN (Amazon Resource Name) for the Resolver rule specified by Id .

DomainName -> (string)

DNS queries for this domain name are forwarded to the IP addresses that are specified in TargetIps . If a query matches multiple Resolver rules (example.com and www.example.com), the query is routed using the Resolver rule that contains the most specific domain name (www.example.com).

Status -> (string)

A code that specifies the current status of the Resolver rule.

StatusMessage -> (string)

A detailed description of the status of a Resolver rule.

RuleType -> (string)

When you want to forward DNS queries for specified domain name to resolvers on your network, specify FORWARD .

When you have a forwarding rule to forward DNS queries for a domain to your network and you want Resolver to process queries for a subdomain of that domain, specify SYSTEM .

For example, to forward DNS queries for example.com to resolvers on your network, you create a rule and specify FORWARD for RuleType . To then have Resolver process queries for apex.example.com, you create a rule and specify SYSTEM for RuleType .

Currently, only Resolver can create rules that have a value of RECURSIVE for RuleType .

Name -> (string)

The name for the Resolver rule, which you specified when you created the Resolver rule.

TargetIps -> (list)

An array that contains the IP addresses and ports that an outbound endpoint forwards DNS queries to. Typically, these are the IP addresses of DNS resolvers on your network.

(structure)

In a CreateResolverRule request, an array of the IPs that you want to forward DNS queries to.

Ip -> (string)

One IPv4 address that you want to forward DNS queries to.

Port -> (integer)

The port at Ip that you want to forward DNS queries to.

Ipv6 -> (string)

One IPv6 address that you want to forward DNS queries to.

Protocol -> (string)

The protocols for the target address. The protocol you choose needs to be supported by the outbound endpoint of the Resolver rule.

ServerNameIndication -> (string)

The Server Name Indication of the DoH server that you want to forward queries to. This is only used if the Protocol of the TargetAddress is DoH .

ResolverEndpointId -> (string)

The ID of the endpoint that the rule is associated with.

OwnerId -> (string)

When a rule is shared with another Amazon Web Services account, the account ID of the account that the rule is shared with.

ShareStatus -> (string)

Whether the rule is shared and, if so, whether the current account is sharing the rule with another account, or another account is sharing the rule with the current account.

CreationTime -> (string)

The date and time that the Resolver rule was created, in Unix time format and Coordinated Universal Time (UTC).

ModificationTime -> (string)

The date and time that the Resolver rule was last updated, in Unix time format and Coordinated Universal Time (UTC).

Table Of Contents

Feedback

User Guide