Exporting generated GuardDuty findings to Amazon S3 buckets - Amazon GuardDuty
ConsiderationsStep 1 – Permissions required to export findingsStep 2 – Attaching policy to your KMS keyStep 3 – Attaching policy to Amazon S3 bucketStep 4 - Exporting findings to an S3 bucket (Console)Step 5 – Frequency for exporting findings

Exporting generated GuardDuty findings to Amazon S3 buckets

GuardDuty retains the generated findings for a period of 90 days. GuardDuty exports the active findings to Amazon EventBridge (EventBridge). You can optionally export the generated findings to an Amazon Simple Storage Service (Amazon S3) bucket. This will help you to track the historical data of potentially suspicious activities in your account and evaluate whether the recommended remediation steps were successful.

Any new active findings that GuardDuty generates are automatically exported within about 5 minutes after the finding is generated. You can set the frequency for how often updates to the active findings are exported to EventBridge. The frequency that you select applies to the exporting of new occurrences of existing findings to EventBridge, your S3 bucket (when configured), and Detective (when integrated). For information about how GuardDuty aggregates multiple occurrences of existing findings, see GuardDuty finding aggregation.

When you configure settings to export findings to an Amazon S3 bucket, GuardDuty uses AWS Key Management Service (AWS KMS) to encrypt the findings data in your S3 bucket. This requires you to add permissions to your S3 bucket and the AWS KMS key so that GuardDuty can use them to export findings in your account.

Considerations

Before proceeding with the prerequisites and steps to export findings, consider the following key concepts:

  • Export settings are regional – You need to configure export options in each Region where you use GuardDuty.

  • Exporting findings to Amazon S3 buckets in different AWS Regions (cross-Region) – GuardDuty supports the following export settings:

    • Your Amazon S3 bucket or object, and AWS KMS key must belong to the same AWS Region.

    • For the findings generated in a commercial Region, you can choose to export these findings to an S3 bucket in any commercial Region. However, you can't export these findings to an S3 bucket in an opt-in Region.

    • For the findings generated in an opt-in Region, you can choose to export these findings to the same opt-in Region where they're generated or any commercial Region. However, you can't export findings from one opt-in Region to another opt-in Region.

  • Permissions to export findings – To configure settings for exporting active findings, your S3 bucket must have permissions that allows GuardDuty to upload objects. You must also have an AWS KMS key that GuardDuty can use to encrypt findings.

  • Archived findings are not exported – The default behavior is that the archived findings, including new instances of suppressed findings, are not exported.

    When a GuardDuty finding gets generated as Archived, you will need to Unarchive it. This changes the Filter finding status to Active. GuardDuty exports the updates to the existing unarchived findings based on how you configure Step 5 – Frequency for exporting findings.

  • GuardDuty administrator account can export findings generated in associated member accounts – When you configure export findings in an administrator account, all the findings from the associated member accounts that are generated in the same Region are also exported to the same location that you configured for the administrator account. For more information, see Understanding the relationship between GuardDuty administrator account and member accounts.

Step 1 – Permissions required to export findings

When you configure settings for exporting findings, you select an Amazon S3 bucket where you can store the findings and an AWS KMS key to use for data encryption. In addition to permissions for GuardDuty actions, you must also have permissions to the following actions to successfully configure settings to export findings:

  • s3:GetBucketLocation

  • s3:PutObject

Step 2 – Attaching policy to your KMS key

GuardDuty encrypts the findings data in your bucket by using AWS Key Management Service. To successfully configure the settings, you must first give GuardDuty permission to use a KMS key. You can grant the permissions by attaching the policy to your KMS key.

When you use a KMS key from another account, you need to apply the key policy by logging in to the AWS account that owns the key. When you configure the settings to export findings, you'll also need the key ARN from the account that owns the key.

To modify the KMS key policy for GuardDuty to encrypt your exported findings

  1. Open the AWS KMS console at https://console.aws.amazon.com/kms.

  2. To change the AWS Region, use the Region selector in the upper-right corner of the page.

  3. Select an existing KMS key or perform the steps to Create a new key in the AWS Key Management Service Developer Guide, that you will use to encrypt the exported findings.

    Note

    The AWS Region of your KMS key and the Amazon S3 bucket must be the same.

    You can use the same S3 bucket and KMS key pair to export the findings from any applicable Region. For more information, see Considerations for exporting findings across Regions.

  4. In the Key policy section, choose Edit.

    If Switch to policy view is displayed, choose it to display the Key policy, and then choose Edit.

  5. Copy the following policy block to your KMS key policy, to grant GuardDuty permission to use your key.

    {    
    "Sid": "AllowGuardDutyKey",
    "Effect": "Allow",
    "Principal": {
        "Service": "guardduty.amazonaws.com"
    },
    "Action": "kms:GenerateDataKey",
    "Resource": "KMS key ARN",
    "Condition": {
        "StringEquals": {
            "aws:SourceAccount": "123456789012",
            "aws:SourceArn": "arn:aws:guardduty:Region2:123456789012:detector/SourceDetectorID"	
        }
    }
}

  6. Edit the policy by replacing the following values that are formatted in red in the policy example:

    1. Replace KMS key ARN with the Amazon Resource Name (ARN) of the KMS key. To locate the key ARN, see Finding the key ID and ARN in the AWS Key Management Service Developer Guide.

    2. Replace 123456789012 with the AWS account ID that owns the GuardDuty account exporting the findings.

    3. Replace Region2 with the AWS Region where the GuardDuty findings are generated.

    4. Replace SourceDetectorID with the detectorID of the GuardDuty account in the specific Region where the findings generated.

      To find the detectorId for your account and current Region, see the Settings page in the https://console.aws.amazon.com/guardduty/ console, or run the ListDetectors API.

    Note

    If you're using GuardDuty in an opt-in Region, replace the value for the "Service" with the Regional endpoint for that Region. For example, if you're using GuardDuty in the Middle East (Bahrain) (me-south-1) Region, replace "Service": "guardduty.amazonaws.com" with "Service": "guardduty.me-south-1.amazonaws.com". For information about endpoints for each opt-in Region, see GuardDuty endpoints and quotas.

  7. If you added the policy statement before the final statement, add a comma before adding this statement. Make sure that the JSON syntax of your KMS key policy is valid.

    Choose Save.

  8. (Optional) copy the key ARN to a notepad for use in the later steps.

Step 3 – Attaching policy to Amazon S3 bucket

Add permissions to the Amazon S3 bucket to which you will export findings so that GuardDuty can upload objects to this S3 bucket. Independent of using an Amazon S3 bucket that belongs to either your account or in a different AWS account, you must add these permissions.

If at any point in time, you decide to export findings to a different S3 bucket, then to continue exporting findings, you must add permissions to that S3 bucket and configure the export findings settings again.

If you do not already have an Amazon S3 bucket where you want to export these findings, see Creating a bucket in the Amazon S3 User Guide.

To attach permissions to your S3 bucket policy

  1. Perform the steps under To create or edit a bucket policy in the Amazon S3 User Guide, until the Edit bucket policy page appears.

  2. The example policy shows how grant GuardDuty permission to export findings to your Amazon S3 bucket. If you change the path after you configure export findings, then you must modify the policy to grant permission to the new location.

    Copy the following example policy and paste it into the Bucket policy editor.

    If you added the policy statement before the final statement, add a comma before adding this statement. Make sure that the JSON syntax of your KMS key policy is valid.

    S3 bucket example policy

    {
    "Version": "2012-10-17",
    "Statement": [
        {
            "Sid": "Allow GetBucketLocation",
            "Effect": "Allow",
            "Principal": {
                "Service": "guardduty.amazonaws.com"
            },
            "Action": "s3:GetBucketLocation",
            "Resource": "Amazon S3 bucket ARN",
            "Condition": {
                "StringEquals": {
                    "aws:SourceAccount": "123456789012",
                    "aws:SourceArn": "arn:aws:guardduty:Region2:123456789012:detector/SourceDetectorID"	

                }
            }
        },
        {
            "Sid": "Allow PutObject",
            "Effect": "Allow",
            "Principal": {
                "Service": "guardduty.amazonaws.com"
            },
            "Action": "s3:PutObject",
            "Resource": "Amazon S3 bucket ARN/[optional prefix]/*",
            "Condition": {
                "StringEquals": {
                    "aws:SourceAccount": "123456789012",
                    "aws:SourceArn": "arn:aws:guardduty:Region2:123456789012:detector/SourceDetectorID"	

                }
            }
        },
        {
            "Sid": "Deny unencrypted object uploads",
            "Effect": "Deny",
            "Principal": {
                "Service": "guardduty.amazonaws.com"
            },
            "Action": "s3:PutObject",
            "Resource": "Amazon S3 bucket ARN/[optional prefix]/*",
            "Condition": {
                "StringNotEquals": {
                    "s3:x-amz-server-side-encryption": "aws:kms"
                }
            }
        },
        {
            "Sid": "Deny incorrect encryption header",
            "Effect": "Deny",
            "Principal": {
                "Service": "guardduty.amazonaws.com"
            },
            "Action": "s3:PutObject",
            "Resource": "Amazon S3 bucket ARN/[optional prefix]/*",
            "Condition": {
                "StringNotEquals": {
                    "s3:x-amz-server-side-encryption-aws-kms-key-id": "KMS key ARN"
                }
            }
        },
        {
            "Sid": "Deny non-HTTPS access",
            "Effect": "Deny",
            "Principal": "*",
            "Action": "s3:*",
            "Resource": "Amazon S3 bucket ARN/[optional prefix]/*",
            "Condition": {
                "Bool": {
                    "aws:SecureTransport": "false"
                }
            }
        }
    ]
}

  3. Edit the policy by replacing the following values that are formatted in red in the policy example:

    1. Replace Amazon S3 bucket ARN with the Amazon Resource Name (ARN) of the Amazon S3 bucket. You can find the Bucket ARN on the Edit bucket policy page in the https://console.aws.amazon.com/s3/ console.

    2. Replace 123456789012 with the AWS account ID that owns the GuardDuty account exporting the findings.

    3. Replace Region2 with the AWS Region where the GuardDuty findings are generated.

    4. Replace SourceDetectorID with the detectorID of the GuardDuty account in the specific Region where the findings generated.

      To find the detectorId for your account and current Region, see the Settings page in the https://console.aws.amazon.com/guardduty/ console, or run the ListDetectors API.

    5. Replace [optional prefix] part of the S3 bucket ARN/[optional prefix] placeholder value with an optional folder location to which you want to export the findings. For more information about the use of prefixes, see Organizing objects using prefixes in the Amazon S3 User Guide.

      When you provide an optional folder location that doesn't exist already, GuardDuty will create that location only if the account associated with the S3 bucket is the same as the account exporting the findings. When you export findings to an S3 bucket that belongs to another account, the folder location must exist already.

    6. Replace KMS key ARN with the Amazon Resource Name (ARN) of the KMS key associated with the encryption of the findings exported to the S3 bucket. To locate the key ARN, see Finding the key ID and ARN in the AWS Key Management Service Developer Guide.

    Note

    If you're using GuardDuty in an opt-in Region, replace the value for the "Service" with the Regional endpoint for that Region. For example, if you're using GuardDuty in the Middle East (Bahrain) (me-south-1) Region, replace "Service": "guardduty.amazonaws.com" with "Service": "guardduty.me-south-1.amazonaws.com". For information about endpoints for each opt-in Region, see GuardDuty endpoints and quotas.

  4. Choose Save.

Step 4 - Exporting findings to an S3 bucket (Console)

GuardDuty permits you to export findings to an existing bucket in another AWS account.

When creating a new S3 bucket or choosing an existing bucket in your account, you can add an optional prefix. When configuring export findings, GuardDuty creates a new folder in the S3 bucket for your findings. The prefix will be appended to the default folder structure that GuardDuty created. For example, the format of the optional prefix /AWSLogs/123456789012/GuardDuty/Region.

The entire path of the S3 object will be amzn-s3-demo-bucket/prefix-name/UUID.jsonl.gz. The UUID is randomly generated and doesn't represent the detector ID or the finding ID.

Important

The KMS key and S3 bucket must be in the same Region.

Before completing these steps, make sure you have attached the respective policies to your KMS key and existing S3 bucket.

To configure export findings

  1. Open the GuardDuty console at https://console.aws.amazon.com/guardduty/.

  2. In the navigation pane, choose Settings.

  3. On the Settings page, under Findings export options, for S3 bucket, choose Configure now (or Edit, as needed).

  4. For S3 bucket ARN, enter the bucket ARN. To find the bucket ARN, see Viewing the properties for an S3 bucket in the Amazon S3 User Guide.

  5. For KMS key ARN, enter the key ARN. To locate the key ARN, see Finding the key ID and ARN in the AWS Key Management Service Developer Guide.

  6. Attach policies

  7. Choose Save.

Step 5 – Setting frequency to export updated active findings

Configure the frequency for exporting updated active findings as appropriate for your environment. By default, updated findings are exported every 6 hours. This means that any findings that are updated after the most recent export are included in the next export. If updated findings are exported every 6 hours and the export occurs at 12:00, any finding that you update after 12:00 is exported at 18:00.

To set the frequency

  1. Open the GuardDuty console at https://console.aws.amazon.com/guardduty/.

  2. Choose Settings.

  3. In the Findings export options section, choose Frequency for updated findings. This sets the frequency for exporting updated Active findings to both EventBridge and Amazon S3. You can choose from the following:

    • Update EventBridge and S3 every 15 minutes

    • Update EventBridge and S3 every 1 hour

    • Update CWE and S3 every 6 hours (default)

  4. Choose Save changes.