Terjemahan disediakan oleh mesin penerjemah. Jika konten terjemahan yang diberikan bertentangan dengan versi bahasa Inggris aslinya, utamakan versi bahasa Inggris.
# Contoh kode untuk Route 53 menggunakan AWS SDKs
Contoh kode berikut menunjukkan cara menggunakan Route 53 dengan kit pengembangan AWS perangkat lunak (SDK).
Untuk daftar lengkap panduan pengembang AWS SDK dan contoh kode, lihat[Menggunakan Route 53 dengan AWS SDK](sdk-general-information-section.md). Topik ini juga mencakup informasi tentang memulai dan detail tentang versi SDK sebelumnya.
**Contents**
+ [Route 53](service_code_examples_route-53.md)
+ [Hal-hal mendasar](service_code_examples_route-53_basics.md)
+ [Tindakan](service_code_examples_route-53_actions.md)
+ [`ChangeResourceRecordSets`](route-53_example_route-53_ChangeResourceRecordSets_section.md)
+ [`CreateHostedZone`](route-53_example_route-53_CreateHostedZone_section.md)
+ [`DeleteHostedZone`](route-53_example_route-53_DeleteHostedZone_section.md)
+ [`GetHostedZone`](route-53_example_route-53_GetHostedZone_section.md)
+ [`ListHostedZones`](route-53_example_route-53_ListHostedZones_section.md)
+ [`ListHostedZonesByName`](route-53_example_route-53_ListHostedZonesByName_section.md)
+ [`ListQueryLoggingConfigs`](route-53_example_route-53_ListQueryLoggingConfigs_section.md)
+ [Registrasi domain Route 53](service_code_examples_route-53-domains.md)
+ [Hal-hal mendasar](service_code_examples_route-53-domains_basics.md)
+ [Hello Route 53 pendaftaran domain](route-53-domains_example_route-53-domains_Hello_section.md)
+ [Pelajari dasar-dasarnya](route-53-domains_example_route-53-domains_Scenario_GetStartedRoute53Domains_section.md)
+ [Tindakan](service_code_examples_route-53-domains_actions.md)
+ [`CheckDomainAvailability`](route-53-domains_example_route-53-domains_CheckDomainAvailability_section.md)
+ [`CheckDomainTransferability`](route-53-domains_example_route-53-domains_CheckDomainTransferability_section.md)
+ [`GetDomainDetail`](route-53-domains_example_route-53-domains_GetDomainDetail_section.md)
+ [`GetDomainSuggestions`](route-53-domains_example_route-53-domains_GetDomainSuggestions_section.md)
+ [`GetOperationDetail`](route-53-domains_example_route-53-domains_GetOperationDetail_section.md)
+ [`ListDomains`](route-53-domains_example_route-53-domains_ListDomains_section.md)
+ [`ListOperations`](route-53-domains_example_route-53-domains_ListOperations_section.md)
+ [`ListPrices`](route-53-domains_example_route-53-domains_ListPrices_section.md)
+ [`RegisterDomain`](route-53-domains_example_route-53-domains_RegisterDomain_section.md)
+ [`ViewBilling`](route-53-domains_example_route-53-domains_ViewBilling_section.md)
# Contoh kode untuk Route 53 menggunakan AWS SDKs
Contoh kode berikut menunjukkan cara menggunakan Route 53 dengan kit pengembangan AWS perangkat lunak (SDK).
*Tindakan* merupakan kutipan kode dari program yang lebih besar dan harus dijalankan dalam konteks. Sementara tindakan menunjukkan cara memanggil fungsi layanan individual, Anda dapat melihat tindakan dalam konteks dalam skenario terkait.
Untuk daftar lengkap panduan pengembang AWS SDK dan contoh kode, lihat[Menggunakan Route 53 dengan AWS SDK](sdk-general-information-section.md). Topik ini juga mencakup informasi tentang memulai dan detail tentang versi SDK sebelumnya.
**Contents**
+ [Hal-hal mendasar](service_code_examples_route-53_basics.md)
+ [Tindakan](service_code_examples_route-53_actions.md)
+ [`ChangeResourceRecordSets`](route-53_example_route-53_ChangeResourceRecordSets_section.md)
+ [`CreateHostedZone`](route-53_example_route-53_CreateHostedZone_section.md)
+ [`DeleteHostedZone`](route-53_example_route-53_DeleteHostedZone_section.md)
+ [`GetHostedZone`](route-53_example_route-53_GetHostedZone_section.md)
+ [`ListHostedZones`](route-53_example_route-53_ListHostedZones_section.md)
+ [`ListHostedZonesByName`](route-53_example_route-53_ListHostedZonesByName_section.md)
+ [`ListQueryLoggingConfigs`](route-53_example_route-53_ListQueryLoggingConfigs_section.md)
# Contoh dasar untuk Route 53 menggunakan AWS SDKs
Contoh kode berikut menunjukkan cara menggunakan dasar-dasar Amazon Route 53 dengan AWS SDKs.
**Contents**
+ [Tindakan](service_code_examples_route-53_actions.md)
+ [`ChangeResourceRecordSets`](route-53_example_route-53_ChangeResourceRecordSets_section.md)
+ [`CreateHostedZone`](route-53_example_route-53_CreateHostedZone_section.md)
+ [`DeleteHostedZone`](route-53_example_route-53_DeleteHostedZone_section.md)
+ [`GetHostedZone`](route-53_example_route-53_GetHostedZone_section.md)
+ [`ListHostedZones`](route-53_example_route-53_ListHostedZones_section.md)
+ [`ListHostedZonesByName`](route-53_example_route-53_ListHostedZonesByName_section.md)
+ [`ListQueryLoggingConfigs`](route-53_example_route-53_ListQueryLoggingConfigs_section.md)
# Tindakan untuk Route 53 menggunakan AWS SDKs
Contoh kode berikut menunjukkan cara melakukan tindakan Route 53 individual dengan AWS SDKs. Setiap contoh menyertakan tautan ke GitHub, di mana Anda dapat menemukan instruksi untuk mengatur dan menjalankan kode.
Contoh berikut hanya mencakup tindakan yang paling umum digunakan. Untuk daftar lengkapnya, lihat [Referensi API Amazon Route 53](https://docs.aws.amazon.com/Route53/latest/APIReference/Welcome.html).
**Topics**
+ [`ChangeResourceRecordSets`](route-53_example_route-53_ChangeResourceRecordSets_section.md)
+ [`CreateHostedZone`](route-53_example_route-53_CreateHostedZone_section.md)
+ [`DeleteHostedZone`](route-53_example_route-53_DeleteHostedZone_section.md)
+ [`GetHostedZone`](route-53_example_route-53_GetHostedZone_section.md)
+ [`ListHostedZones`](route-53_example_route-53_ListHostedZones_section.md)
+ [`ListHostedZonesByName`](route-53_example_route-53_ListHostedZonesByName_section.md)
+ [`ListQueryLoggingConfigs`](route-53_example_route-53_ListQueryLoggingConfigs_section.md)
# Gunakan `ChangeResourceRecordSets` dengan CLI
Contoh kode berikut menunjukkan cara menggunakan`ChangeResourceRecordSets`.
------
#### [ CLI ]
**AWS CLI**
**Untuk membuat, memperbarui, atau menghapus kumpulan catatan sumber daya**
`change-resource-record-sets`Perintah berikut membuat catatan sumber daya yang ditetapkan menggunakan `hosted-zone-id` `Z1R8UBAEXAMPLE` dan konfigurasi berformat JSON dalam file: `C:\awscli\route53\change-resource-record-sets.json`
```
aws route53 change-resource-record-sets --hosted-zone-id Z1R8UBAEXAMPLE --change-batch file://C:\awscli\route53\change-resource-record-sets.json
```
Untuk informasi selengkapnya, lihat POST ChangeResourceRecordSets di *Referensi API Amazon Route 53*.
Konfigurasi dalam file JSON tergantung pada jenis kumpulan catatan sumber daya yang ingin Anda buat:
BasicWeightedAliasWeighted AliasLatencyLatency AliasFailoverFailover Alias
**Sintaks dasar**:
```
{
"Comment": "optional comment about the changes in this change batch request",
"Changes": [
{
"Action": "CREATE"|"DELETE"|"UPSERT",
"ResourceRecordSet": {
"Name": "DNS domain name",
"Type": "SOA"|"A"|"TXT"|"NS"|"CNAME"|"MX"|"PTR"|"SRV"|"SPF"|"AAAA",
"TTL": time to live in seconds,
"ResourceRecords": [
{
"Value": "applicable value for the record type"
},
{...}
]
}
},
{...}
]
}
```
**Sintaks tertimbang**:
```
{
"Comment": "optional comment about the changes in this change batch request",
"Changes": [
{
"Action": "CREATE"|"DELETE"|"UPSERT",
"ResourceRecordSet": {
"Name": "DNS domain name",
"Type": "SOA"|"A"|"TXT"|"NS"|"CNAME"|"MX"|"PTR"|"SRV"|"SPF"|"AAAA",
"SetIdentifier": "unique description for this resource record set",
"Weight": value between 0 and 255,
"TTL": time to live in seconds,
"ResourceRecords": [
{
"Value": "applicable value for the record type"
},
{...}
],
"HealthCheckId": "optional ID of an Amazon Route 53 health check"
}
},
{...}
]
}
```
**Sintaks Alias**:
```
{
"Comment": "optional comment about the changes in this change batch request",
"Changes": [
{
"Action": "CREATE"|"DELETE"|"UPSERT",
"ResourceRecordSet": {
"Name": "DNS domain name",
"Type": "SOA"|"A"|"TXT"|"NS"|"CNAME"|"MX"|"PTR"|"SRV"|"SPF"|"AAAA",
"AliasTarget": {
"HostedZoneId": "hosted zone ID for your CloudFront distribution, Amazon S3 bucket, Elastic Load Balancing load balancer, or Amazon Route 53 hosted zone",
"DNSName": "DNS domain name for your CloudFront distribution, Amazon S3 bucket, Elastic Load Balancing load balancer, or another resource record set in this hosted zone",
"EvaluateTargetHealth": true|false
},
"HealthCheckId": "optional ID of an Amazon Route 53 health check"
}
},
{...}
]
}
```
Sintaks **Alias Tertimbang**:
```
{
"Comment": "optional comment about the changes in this change batch request",
"Changes": [
{
"Action": "CREATE"|"DELETE"|"UPSERT",
"ResourceRecordSet": {
"Name": "DNS domain name",
"Type": "SOA"|"A"|"TXT"|"NS"|"CNAME"|"MX"|"PTR"|"SRV"|"SPF"|"AAAA",
"SetIdentifier": "unique description for this resource record set",
"Weight": value between 0 and 255,
"AliasTarget": {
"HostedZoneId": "hosted zone ID for your CloudFront distribution, Amazon S3 bucket, Elastic Load Balancing load balancer, or Amazon Route 53 hosted zone",
"DNSName": "DNS domain name for your CloudFront distribution, Amazon S3 bucket, Elastic Load Balancing load balancer, or another resource record set in this hosted zone",
"EvaluateTargetHealth": true|false
},
"HealthCheckId": "optional ID of an Amazon Route 53 health check"
}
},
{...}
]
}
```
**Sintaks Latensi**:
```
{
"Comment": "optional comment about the changes in this change batch request",
"Changes": [
{
"Action": "CREATE"|"DELETE"|"UPSERT",
"ResourceRecordSet": {
"Name": "DNS domain name",
"Type": "SOA"|"A"|"TXT"|"NS"|"CNAME"|"MX"|"PTR"|"SRV"|"SPF"|"AAAA",
"SetIdentifier": "unique description for this resource record set",
"Region": "Amazon EC2 region name",
"TTL": time to live in seconds,
"ResourceRecords": [
{
"Value": "applicable value for the record type"
},
{...}
],
"HealthCheckId": "optional ID of an Amazon Route 53 health check"
}
},
{...}
]
}
```
Sintaks **Alias Latensi**:
```
{
"Comment": "optional comment about the changes in this change batch request",
"Changes": [
{
"Action": "CREATE"|"DELETE"|"UPSERT",
"ResourceRecordSet": {
"Name": "DNS domain name",
"Type": "SOA"|"A"|"TXT"|"NS"|"CNAME"|"MX"|"PTR"|"SRV"|"SPF"|"AAAA",
"SetIdentifier": "unique description for this resource record set",
"Region": "Amazon EC2 region name",
"AliasTarget": {
"HostedZoneId": "hosted zone ID for your CloudFront distribution, Amazon S3 bucket, Elastic Load Balancing load balancer, or Amazon Route 53 hosted zone",
"DNSName": "DNS domain name for your CloudFront distribution, Amazon S3 bucket, Elastic Load Balancing load balancer, or another resource record set in this hosted zone",
"EvaluateTargetHealth": true|false
},
"HealthCheckId": "optional ID of an Amazon Route 53 health check"
}
},
{...}
]
}
```
**Sintaks Failover**:
```
{
"Comment": "optional comment about the changes in this change batch request",
"Changes": [
{
"Action": "CREATE"|"DELETE"|"UPSERT",
"ResourceRecordSet": {
"Name": "DNS domain name",
"Type": "SOA"|"A"|"TXT"|"NS"|"CNAME"|"MX"|"PTR"|"SRV"|"SPF"|"AAAA",
"SetIdentifier": "unique description for this resource record set",
"Failover": "PRIMARY" | "SECONDARY",
"TTL": time to live in seconds,
"ResourceRecords": [
{
"Value": "applicable value for the record type"
},
{...}
],
"HealthCheckId": "ID of an Amazon Route 53 health check"
}
},
{...}
]
}
```
Sintaks **Alias Failover**:
```
{
"Comment": "optional comment about the changes in this change batch request",
"Changes": [
{
"Action": "CREATE"|"DELETE"|"UPSERT",
"ResourceRecordSet": {
"Name": "DNS domain name",
"Type": "SOA"|"A"|"TXT"|"NS"|"CNAME"|"MX"|"PTR"|"SRV"|"SPF"|"AAAA",
"SetIdentifier": "unique description for this resource record set",
"Failover": "PRIMARY" | "SECONDARY",
"AliasTarget": {
"HostedZoneId": "hosted zone ID for your CloudFront distribution, Amazon S3 bucket, Elastic Load Balancing load balancer, or Amazon Route 53 hosted zone",
"DNSName": "DNS domain name for your CloudFront distribution, Amazon S3 bucket, Elastic Load Balancing load balancer, or another resource record set in this hosted zone",
"EvaluateTargetHealth": true|false
},
"HealthCheckId": "optional ID of an Amazon Route 53 health check"
}
},
{...}
]
}
```
+ Untuk detail API, lihat [ChangeResourceRecordSets](https://awscli.amazonaws.com/v2/documentation/api/latest/reference/route53/change-resource-record-sets.html)di *Referensi AWS CLI Perintah*.
------
#### [ PowerShell ]
**Alat untuk PowerShell V4**
**Contoh 1: Contoh ini membuat catatan A untuk www.example.com dan mengubah catatan A untuk test.example.com dari 192.0.2.3 menjadi 192.0.2.1. Perhatikan bahwa nilai untuk perubahan catatan tipe TXT harus dalam tanda kutip ganda. Lihat dokumentasi Amazon Route 53 untuk detail selengkapnya. Anda dapat menggunakan Get-R53Change cmdlet untuk melakukan polling untuk menentukan kapan perubahan selesai.**
```
$change1 = New-Object Amazon.Route53.Model.Change
$change1.Action = "CREATE"
$change1.ResourceRecordSet = New-Object Amazon.Route53.Model.ResourceRecordSet
$change1.ResourceRecordSet.Name = "www.example.com"
$change1.ResourceRecordSet.Type = "TXT"
$change1.ResourceRecordSet.TTL = 600
$change1.ResourceRecordSet.ResourceRecords.Add(@{Value="item 1 item 2 item 3"})
$change2 = New-Object Amazon.Route53.Model.Change
$change2.Action = "DELETE"
$change2.ResourceRecordSet = New-Object Amazon.Route53.Model.ResourceRecordSet
$change2.ResourceRecordSet.Name = "test.example.com"
$change2.ResourceRecordSet.Type = "A"
$change2.ResourceRecordSet.TTL = 600
$change2.ResourceRecordSet.ResourceRecords.Add(@{Value="192.0.2.3"})
$change3 = New-Object Amazon.Route53.Model.Change
$change3.Action = "CREATE"
$change3.ResourceRecordSet = New-Object Amazon.Route53.Model.ResourceRecordSet
$change3.ResourceRecordSet.Name = "test.example.com"
$change3.ResourceRecordSet.Type = "A"
$change3.ResourceRecordSet.TTL = 600
$change3.ResourceRecordSet.ResourceRecords.Add(@{Value="192.0.2.1"})
$params = @{
HostedZoneId="Z1PA6795UKMFR9"
ChangeBatch_Comment="This change batch creates a TXT record for www.example.com. and changes the A record for test.example.com. from 192.0.2.3 to 192.0.2.1."
ChangeBatch_Change=$change1,$change2,$change3
}
Edit-R53ResourceRecordSet @params
```
**Contoh 2: Contoh ini menunjukkan cara membuat kumpulan catatan sumber daya alias. 'Z222222222' adalah ID dari zona yang dihosting Amazon Route 53 tempat Anda membuat kumpulan catatan sumber daya alias. 'example.com' adalah puncak zona tempat Anda ingin membuat alias dan 'www.example.com' adalah subdomain yang Anda juga ingin membuat alias. 'Z11111111111' adalah contoh ID zona yang dihosting untuk penyeimbang beban dan 'example-load-balancer-1111111111.us-east-1.elb.amazonaws.com' adalah contoh nama domain penyeimbang beban yang digunakan Amazon Route 53 untuk menanggapi kueri untuk example.com dan www.example.com. Lihat dokumentasi Amazon Route 53 untuk detail selengkapnya. Anda dapat menggunakan Get-R53Change cmdlet untuk melakukan polling untuk menentukan kapan perubahan selesai.**
```
$change1 = New-Object Amazon.Route53.Model.Change
$change1.Action = "CREATE"
$change1.ResourceRecordSet = New-Object Amazon.Route53.Model.ResourceRecordSet
$change1.ResourceRecordSet.Name = "example.com"
$change1.ResourceRecordSet.Type = "A"
$change1.ResourceRecordSet.AliasTarget = New-Object Amazon.Route53.Model.AliasTarget
$change1.ResourceRecordSet.AliasTarget.HostedZoneId = "Z1111111111111"
$change1.ResourceRecordSet.AliasTarget.DNSName = "example-load-balancer-1111111111.us-east-1.elb.amazonaws.com."
$change1.ResourceRecordSet.AliasTarget.EvaluateTargetHealth = $true
$change2 = New-Object Amazon.Route53.Model.Change
$change2.Action = "CREATE"
$change2.ResourceRecordSet = New-Object Amazon.Route53.Model.ResourceRecordSet
$change1.ResourceRecordSet.Name = "www.example.com"
$change1.ResourceRecordSet.Type = "A"
$change1.ResourceRecordSet.AliasTarget = New-Object Amazon.Route53.Model.AliasTarget
$change1.ResourceRecordSet.AliasTarget.HostedZoneId = "Z1111111111111"
$change1.ResourceRecordSet.AliasTarget.DNSName = "example-load-balancer-1111111111.us-east-1.elb.amazonaws.com."
$change1.ResourceRecordSet.AliasTarget.EvaluateTargetHealth = $false
$params = @{
HostedZoneId="Z222222222"
ChangeBatch_Comment="This change batch creates two alias resource record sets, one for the zone apex, example.com, and one for www.example.com, that both point to example-load-balancer-1111111111.us-east-1.elb.amazonaws.com."
ChangeBatch_Change=$change1,$change2
}
Edit-R53ResourceRecordSet @params
```
**Contoh 3: Contoh ini membuat dua catatan A untuk www.example.com. Seperempat dari waktu (1/ (1\$13)), Amazon Route 53 menanggapi kueri untuk www.example.com dengan dua nilai untuk kumpulan catatan sumber daya pertama (192.0.2.9 dan 192.0.2.10). Tiga perempat waktu (3/ (1\$13)) Amazon Route 53 menanggapi kueri untuk www.example.com dengan dua nilai untuk kumpulan catatan sumber daya kedua (192.0.2.11 dan 192.0.2.12). Lihat dokumentasi Amazon Route 53 untuk detail selengkapnya. Anda dapat menggunakan Get-R53Change cmdlet untuk melakukan polling untuk menentukan kapan perubahan selesai.**
```
$change1 = New-Object Amazon.Route53.Model.Change
$change1.Action = "CREATE"
$change1.ResourceRecordSet = New-Object Amazon.Route53.Model.ResourceRecordSet
$change1.ResourceRecordSet.Name = "www.example.com"
$change1.ResourceRecordSet.Type = "A"
$change1.ResourceRecordSet.SetIdentifier = "Rack 2, Positions 4 and 5"
$change1.ResourceRecordSet.Weight = 1
$change1.ResourceRecordSet.TTL = 600
$change1.ResourceRecordSet.ResourceRecords.Add(@{Value="192.0.2.9"})
$change1.ResourceRecordSet.ResourceRecords.Add(@{Value="192.0.2.10"})
$change2 = New-Object Amazon.Route53.Model.Change
$change2.Action = "CREATE"
$change2.ResourceRecordSet = New-Object Amazon.Route53.Model.ResourceRecordSet
$change2.ResourceRecordSet.Name = "www.example.com"
$change2.ResourceRecordSet.Type = "A"
$change2.ResourceRecordSet.SetIdentifier = "Rack 5, Positions 1 and 2"
$change2.ResourceRecordSet.Weight = 3
$change2.ResourceRecordSet.TTL = 600
$change2.ResourceRecordSet.ResourceRecords.Add(@{Value="192.0.2.11"})
$change2.ResourceRecordSet.ResourceRecords.Add(@{Value="192.0.2.12"})
$params = @{
HostedZoneId="Z1PA6795UKMFR9"
ChangeBatch_Comment="This change creates two weighted resource record sets, each of which has two values."
ChangeBatch_Change=$change1,$change2
}
Edit-R53ResourceRecordSet @params
```
**Contoh 4: Contoh ini menunjukkan cara membuat kumpulan catatan sumber daya alias tertimbang dengan asumsi bahwa example.com adalah domain yang ingin Anda buat kumpulan catatan sumber daya alias tertimbang. SetIdentifier membedakan dua set catatan sumber daya alias tertimbang satu sama lain. Elemen ini diperlukan karena elemen Nama dan Jenis memiliki nilai yang sama untuk kedua kumpulan catatan sumber daya. Z1111111111111 dan Z3333333333333 adalah contoh zona host untuk penyeimbang beban ELB yang ditentukan oleh nilai. IDs DNSName example-load-balancer-2222222222.us-east-1.elb.amazonaws.com dan example-load-balancer -4444444444.us-east-1.elb.amazonaws.com adalah contoh domain Elastic Load Balancing dari mana Amazon Route 53 menanggapi kueri untuk example.com. Lihat dokumentasi Amazon Route 53 untuk detail selengkapnya. Anda dapat menggunakan Get-R53Change cmdlet untuk melakukan polling untuk menentukan kapan perubahan selesai.**
```
$change1 = New-Object Amazon.Route53.Model.Change
$change1.Action = "CREATE"
$change1.ResourceRecordSet = New-Object Amazon.Route53.Model.ResourceRecordSet
$change1.ResourceRecordSet.Name = "example.com"
$change1.ResourceRecordSet.Type = "A"
$change1.ResourceRecordSet.SetIdentifier = "1"
$change1.ResourceRecordSet.Weight = 3
$change1.ResourceRecordSet.AliasTarget = New-Object Amazon.Route53.Model.AliasTarget
$change1.ResourceRecordSet.AliasTarget.HostedZoneId = "Z1111111111111"
$change1.ResourceRecordSet.AliasTarget.DNSName = "example-load-balancer-2222222222.us-east-1.elb.amazonaws.com."
$change1.ResourceRecordSet.AliasTarget.EvaluateTargetHealth = $true
$change2 = New-Object Amazon.Route53.Model.Change
$change2.Action = "CREATE"
$change2.ResourceRecordSet = New-Object Amazon.Route53.Model.ResourceRecordSet
$change2.ResourceRecordSet.Name = "example.com"
$change2.ResourceRecordSet.Type = "A"
$change2.ResourceRecordSet.SetIdentifier = "2"
$change2.ResourceRecordSet.Weight = 1
$change2.ResourceRecordSet.AliasTarget = New-Object Amazon.Route53.Model.AliasTarget
$change2.ResourceRecordSet.AliasTarget.HostedZoneId = "Z3333333333333"
$change2.ResourceRecordSet.AliasTarget.DNSName = "example-load-balancer-4444444444.us-east-1.elb.amazonaws.com."
$change2.ResourceRecordSet.AliasTarget.EvaluateTargetHealth = $false
$params = @{
HostedZoneId="Z5555555555"
ChangeBatch_Comment="This change batch creates two weighted alias resource record sets. Amazon Route 53 responds to queries for example.com with the first ELB domain 3/4ths of the times and the second one 1/4th of the time."
ChangeBatch_Change=$change1,$change2
}
Edit-R53ResourceRecordSet @params
```
**Contoh 5: Contoh ini membuat dua set catatan sumber daya alias latensi, satu untuk penyeimbang beban ELB di wilayah AS Barat (Oregon) (us-west-2), dan satu lagi untuk penyeimbang beban di wilayah Asia Pasifik (Singapura) (ap-southeast-1). Lihat dokumentasi Amazon Route 53 untuk detail selengkapnya. Anda dapat menggunakan Get-R53Change cmdlet untuk melakukan polling untuk menentukan kapan perubahan selesai.**
```
$change1 = New-Object Amazon.Route53.Model.Change
$change1.Action = "CREATE"
$change1.ResourceRecordSet = New-Object Amazon.Route53.Model.ResourceRecordSet
$change1.ResourceRecordSet.Name = "example.com"
$change1.ResourceRecordSet.Type = "A"
$change1.ResourceRecordSet.SetIdentifier = "Oregon load balancer 1"
$change1.ResourceRecordSet.Region = us-west-2
$change1.ResourceRecordSet.AliasTarget = New-Object Amazon.Route53.Model.AliasTarget
$change1.ResourceRecordSet.AliasTarget.HostedZoneId = "Z1111111111111"
$change1.ResourceRecordSet.AliasTarget.DNSName = "example-load-balancer-2222222222.us-west-2.elb.amazonaws.com"
$change1.ResourceRecordSet.AliasTarget.EvaluateTargetHealth = $true
$change2 = New-Object Amazon.Route53.Model.Change
$change2.Action = "CREATE"
$change2.ResourceRecordSet = New-Object Amazon.Route53.Model.ResourceRecordSet
$change2.ResourceRecordSet.Name = "example.com"
$change2.ResourceRecordSet.Type = "A"
$change2.ResourceRecordSet.SetIdentifier = "Singapore load balancer 1"
$change2.ResourceRecordSet.Region = ap-southeast-1
$change2.ResourceRecordSet.AliasTarget = New-Object Amazon.Route53.Model.AliasTarget
$change2.ResourceRecordSet.AliasTarget.HostedZoneId = "Z2222222222222"
$change2.ResourceRecordSet.AliasTarget.DNSName = "example-load-balancer-1111111111.ap-southeast-1.elb.amazonaws.com"
$change2.ResourceRecordSet.AliasTarget.EvaluateTargetHealth = $true
$params = @{
HostedZoneId="Z5555555555"
ChangeBatch_Comment="This change batch creates two latency resource record sets, one for the US West (Oregon) region and one for the Asia Pacific (Singapore) region."
ChangeBatch_Change=$change1,$change2
}
Edit-R53ResourceRecordSet @params
```
+ Untuk detail API, lihat [ChangeResourceRecordSets](https://docs.aws.amazon.com/powershell/v4/reference)di *Referensi Alat AWS untuk PowerShell Cmdlet (V4)*.
**Alat untuk PowerShell V5**
**Contoh 1: Contoh ini membuat catatan A untuk www.example.com dan mengubah catatan A untuk test.example.com dari 192.0.2.3 menjadi 192.0.2.1. Perhatikan bahwa nilai untuk perubahan catatan tipe TXT harus dalam tanda kutip ganda. Lihat dokumentasi Amazon Route 53 untuk detail selengkapnya. Anda dapat menggunakan Get-R53Change cmdlet untuk melakukan polling untuk menentukan kapan perubahan selesai.**
```
$change1 = New-Object Amazon.Route53.Model.Change
$change1.Action = "CREATE"
$change1.ResourceRecordSet = New-Object Amazon.Route53.Model.ResourceRecordSet
$change1.ResourceRecordSet.Name = "www.example.com"
$change1.ResourceRecordSet.Type = "TXT"
$change1.ResourceRecordSet.TTL = 600
$change1.ResourceRecordSet.ResourceRecords = @()
$change1.ResourceRecordSet.ResourceRecords.Add(@{Value="item 1 item 2 item 3"})
$change2 = New-Object Amazon.Route53.Model.Change
$change2.Action = "DELETE"
$change2.ResourceRecordSet = New-Object Amazon.Route53.Model.ResourceRecordSet
$change2.ResourceRecordSet.Name = "test.example.com"
$change2.ResourceRecordSet.Type = "A"
$change2.ResourceRecordSet.TTL = 600
$change2.ResourceRecordSet.ResourceRecords = @()
$change2.ResourceRecordSet.ResourceRecords.Add(@{Value="192.0.2.3"})
$change3 = New-Object Amazon.Route53.Model.Change
$change3.Action = "CREATE"
$change3.ResourceRecordSet = New-Object Amazon.Route53.Model.ResourceRecordSet
$change3.ResourceRecordSet.Name = "test.example.com"
$change3.ResourceRecordSet.Type = "A"
$change3.ResourceRecordSet.TTL = 600
$change3.ResourceRecordSet.ResourceRecords = @()
$change3.ResourceRecordSet.ResourceRecords.Add(@{Value="192.0.2.1"})
$params = @{
HostedZoneId="Z1PA6795UKMFR9"
ChangeBatch_Comment="This change batch creates a TXT record for www.example.com. and changes the A record for test.example.com. from 192.0.2.3 to 192.0.2.1."
ChangeBatch_Change=$change1,$change2,$change3
}
Edit-R53ResourceRecordSet @params
```
**Contoh 2: Contoh ini menunjukkan cara membuat kumpulan catatan sumber daya alias. 'Z222222222' adalah ID dari zona yang dihosting Amazon Route 53 tempat Anda membuat kumpulan catatan sumber daya alias. 'example.com' adalah puncak zona tempat Anda ingin membuat alias dan 'www.example.com' adalah subdomain yang Anda juga ingin membuat alias. 'Z11111111111' adalah contoh ID zona yang dihosting untuk penyeimbang beban dan 'example-load-balancer-1111111111.us-east-1.elb.amazonaws.com' adalah contoh nama domain penyeimbang beban yang digunakan Amazon Route 53 untuk menanggapi kueri untuk example.com dan www.example.com. Lihat dokumentasi Amazon Route 53 untuk detail selengkapnya. Anda dapat menggunakan Get-R53Change cmdlet untuk melakukan polling untuk menentukan kapan perubahan selesai.**
```
$change1 = New-Object Amazon.Route53.Model.Change
$change1.Action = "CREATE"
$change1.ResourceRecordSet = New-Object Amazon.Route53.Model.ResourceRecordSet
$change1.ResourceRecordSet.Name = "example.com"
$change1.ResourceRecordSet.Type = "A"
$change1.ResourceRecordSet.AliasTarget = New-Object Amazon.Route53.Model.AliasTarget
$change1.ResourceRecordSet.AliasTarget.HostedZoneId = "Z1111111111111"
$change1.ResourceRecordSet.AliasTarget.DNSName = "example-load-balancer-1111111111.us-east-1.elb.amazonaws.com."
$change1.ResourceRecordSet.AliasTarget.EvaluateTargetHealth = $true
$change2 = New-Object Amazon.Route53.Model.Change
$change2.Action = "CREATE"
$change2.ResourceRecordSet = New-Object Amazon.Route53.Model.ResourceRecordSet
$change1.ResourceRecordSet.Name = "www.example.com"
$change1.ResourceRecordSet.Type = "A"
$change1.ResourceRecordSet.AliasTarget = New-Object Amazon.Route53.Model.AliasTarget
$change1.ResourceRecordSet.AliasTarget.HostedZoneId = "Z1111111111111"
$change1.ResourceRecordSet.AliasTarget.DNSName = "example-load-balancer-1111111111.us-east-1.elb.amazonaws.com."
$change1.ResourceRecordSet.AliasTarget.EvaluateTargetHealth = $false
$params = @{
HostedZoneId="Z222222222"
ChangeBatch_Comment="This change batch creates two alias resource record sets, one for the zone apex, example.com, and one for www.example.com, that both point to example-load-balancer-1111111111.us-east-1.elb.amazonaws.com."
ChangeBatch_Change=$change1,$change2
}
Edit-R53ResourceRecordSet @params
```
**Contoh 3: Contoh ini membuat dua catatan A untuk www.example.com. Seperempat dari waktu (1/ (1\$13)), Amazon Route 53 menanggapi kueri untuk www.example.com dengan dua nilai untuk kumpulan catatan sumber daya pertama (192.0.2.9 dan 192.0.2.10). Tiga perempat waktu (3/ (1\$13)) Amazon Route 53 menanggapi kueri untuk www.example.com dengan dua nilai untuk kumpulan catatan sumber daya kedua (192.0.2.11 dan 192.0.2.12). Lihat dokumentasi Amazon Route 53 untuk detail selengkapnya. Anda dapat menggunakan Get-R53Change cmdlet untuk melakukan polling untuk menentukan kapan perubahan selesai.**
```
$change1 = New-Object Amazon.Route53.Model.Change
$change1.Action = "CREATE"
$change1.ResourceRecordSet = New-Object Amazon.Route53.Model.ResourceRecordSet
$change1.ResourceRecordSet.Name = "www.example.com"
$change1.ResourceRecordSet.Type = "A"
$change1.ResourceRecordSet.SetIdentifier = "Rack 2, Positions 4 and 5"
$change1.ResourceRecordSet.Weight = 1
$change1.ResourceRecordSet.TTL = 600
$change1.ResourceRecordSet.ResourceRecords = @()
$change1.ResourceRecordSet.ResourceRecords.Add(@{Value="192.0.2.9"})
$change1.ResourceRecordSet.ResourceRecords.Add(@{Value="192.0.2.10"})
$change2 = New-Object Amazon.Route53.Model.Change
$change2.Action = "CREATE"
$change2.ResourceRecordSet = New-Object Amazon.Route53.Model.ResourceRecordSet
$change2.ResourceRecordSet.Name = "www.example.com"
$change2.ResourceRecordSet.Type = "A"
$change2.ResourceRecordSet.SetIdentifier = "Rack 5, Positions 1 and 2"
$change2.ResourceRecordSet.Weight = 3
$change2.ResourceRecordSet.TTL = 600
$change2.ResourceRecordSet.ResourceRecords = @()
$change2.ResourceRecordSet.ResourceRecords.Add(@{Value="192.0.2.11"})
$change2.ResourceRecordSet.ResourceRecords.Add(@{Value="192.0.2.12"})
$params = @{
HostedZoneId="Z1PA6795UKMFR9"
ChangeBatch_Comment="This change creates two weighted resource record sets, each of which has two values."
ChangeBatch_Change=$change1,$change2
}
Edit-R53ResourceRecordSet @params
```
**Contoh 4: Contoh ini menunjukkan cara membuat kumpulan catatan sumber daya alias tertimbang dengan asumsi bahwa example.com adalah domain yang ingin Anda buat kumpulan catatan sumber daya alias tertimbang. SetIdentifier membedakan dua set catatan sumber daya alias tertimbang satu sama lain. Elemen ini diperlukan karena elemen Nama dan Jenis memiliki nilai yang sama untuk kedua kumpulan catatan sumber daya. Z1111111111111 dan Z3333333333333 adalah contoh zona host untuk penyeimbang beban ELB yang ditentukan oleh nilai. IDs DNSName example-load-balancer-2222222222.us-east-1.elb.amazonaws.com dan example-load-balancer -4444444444.us-east-1.elb.amazonaws.com adalah contoh domain Elastic Load Balancing dari mana Amazon Route 53 menanggapi kueri untuk example.com. Lihat dokumentasi Amazon Route 53 untuk detail selengkapnya. Anda dapat menggunakan Get-R53Change cmdlet untuk melakukan polling untuk menentukan kapan perubahan selesai.**
```
$change1 = New-Object Amazon.Route53.Model.Change
$change1.Action = "CREATE"
$change1.ResourceRecordSet = New-Object Amazon.Route53.Model.ResourceRecordSet
$change1.ResourceRecordSet.Name = "example.com"
$change1.ResourceRecordSet.Type = "A"
$change1.ResourceRecordSet.SetIdentifier = "1"
$change1.ResourceRecordSet.Weight = 3
$change1.ResourceRecordSet.AliasTarget = New-Object Amazon.Route53.Model.AliasTarget
$change1.ResourceRecordSet.AliasTarget.HostedZoneId = "Z1111111111111"
$change1.ResourceRecordSet.AliasTarget.DNSName = "example-load-balancer-2222222222.us-east-1.elb.amazonaws.com."
$change1.ResourceRecordSet.AliasTarget.EvaluateTargetHealth = $true
$change2 = New-Object Amazon.Route53.Model.Change
$change2.Action = "CREATE"
$change2.ResourceRecordSet = New-Object Amazon.Route53.Model.ResourceRecordSet
$change2.ResourceRecordSet.Name = "example.com"
$change2.ResourceRecordSet.Type = "A"
$change2.ResourceRecordSet.SetIdentifier = "2"
$change2.ResourceRecordSet.Weight = 1
$change2.ResourceRecordSet.AliasTarget = New-Object Amazon.Route53.Model.AliasTarget
$change2.ResourceRecordSet.AliasTarget.HostedZoneId = "Z3333333333333"
$change2.ResourceRecordSet.AliasTarget.DNSName = "example-load-balancer-4444444444.us-east-1.elb.amazonaws.com."
$change2.ResourceRecordSet.AliasTarget.EvaluateTargetHealth = $false
$params = @{
HostedZoneId="Z5555555555"
ChangeBatch_Comment="This change batch creates two weighted alias resource record sets. Amazon Route 53 responds to queries for example.com with the first ELB domain 3/4ths of the times and the second one 1/4th of the time."
ChangeBatch_Change=$change1,$change2
}
Edit-R53ResourceRecordSet @params
```
**Contoh 5: Contoh ini membuat dua set catatan sumber daya alias latensi, satu untuk penyeimbang beban ELB di wilayah AS Barat (Oregon) (us-west-2), dan satu lagi untuk penyeimbang beban di wilayah Asia Pasifik (Singapura) (ap-southeast-1). Lihat dokumentasi Amazon Route 53 untuk detail selengkapnya. Anda dapat menggunakan Get-R53Change cmdlet untuk melakukan polling untuk menentukan kapan perubahan selesai.**
```
$change1 = New-Object Amazon.Route53.Model.Change
$change1.Action = "CREATE"
$change1.ResourceRecordSet = New-Object Amazon.Route53.Model.ResourceRecordSet
$change1.ResourceRecordSet.Name = "example.com"
$change1.ResourceRecordSet.Type = "A"
$change1.ResourceRecordSet.SetIdentifier = "Oregon load balancer 1"
$change1.ResourceRecordSet.Region = us-west-2
$change1.ResourceRecordSet.AliasTarget = New-Object Amazon.Route53.Model.AliasTarget
$change1.ResourceRecordSet.AliasTarget.HostedZoneId = "Z1111111111111"
$change1.ResourceRecordSet.AliasTarget.DNSName = "example-load-balancer-2222222222.us-west-2.elb.amazonaws.com"
$change1.ResourceRecordSet.AliasTarget.EvaluateTargetHealth = $true
$change2 = New-Object Amazon.Route53.Model.Change
$change2.Action = "CREATE"
$change2.ResourceRecordSet = New-Object Amazon.Route53.Model.ResourceRecordSet
$change2.ResourceRecordSet.Name = "example.com"
$change2.ResourceRecordSet.Type = "A"
$change2.ResourceRecordSet.SetIdentifier = "Singapore load balancer 1"
$change2.ResourceRecordSet.Region = ap-southeast-1
$change2.ResourceRecordSet.AliasTarget = New-Object Amazon.Route53.Model.AliasTarget
$change2.ResourceRecordSet.AliasTarget.HostedZoneId = "Z2222222222222"
$change2.ResourceRecordSet.AliasTarget.DNSName = "example-load-balancer-1111111111.ap-southeast-1.elb.amazonaws.com"
$change2.ResourceRecordSet.AliasTarget.EvaluateTargetHealth = $true
$params = @{
HostedZoneId="Z5555555555"
ChangeBatch_Comment="This change batch creates two latency resource record sets, one for the US West (Oregon) region and one for the Asia Pacific (Singapore) region."
ChangeBatch_Change=$change1,$change2
}
Edit-R53ResourceRecordSet @params
```
+ Untuk detail API, lihat [ChangeResourceRecordSets](https://docs.aws.amazon.com/powershell/v5/reference)di *Referensi Alat AWS untuk PowerShell Cmdlet (V5)*.
------
Untuk daftar lengkap panduan pengembang AWS SDK dan contoh kode, lihat[Menggunakan Route 53 dengan AWS SDK](sdk-general-information-section.md). Topik ini juga mencakup informasi tentang memulai dan detail tentang versi SDK sebelumnya.
# Gunakan `CreateHostedZone` dengan CLI
Contoh kode berikut menunjukkan cara menggunakan`CreateHostedZone`.
------
#### [ CLI ]
**AWS CLI**
**Untuk membuat zona yang dihosting**
`create-hosted-zone`Perintah berikut menambahkan zona host bernama `example.com` menggunakan referensi `2014-04-01-18:47` pemanggil. Komentar opsional mencakup spasi, sehingga harus dilampirkan dalam tanda kutip:
```
aws route53 create-hosted-zone --name example.com --caller-reference 2014-04-01-18:47 --hosted-zone-config Comment="command-line version"
```
Untuk informasi selengkapnya, lihat Bekerja dengan Zona yang Dihosting di *Panduan Pengembang Amazon Route 53*.
+ Untuk detail API, lihat [CreateHostedZone](https://awscli.amazonaws.com/v2/documentation/api/latest/reference/route53/create-hosted-zone.html)di *Referensi AWS CLI Perintah*.
------
#### [ PowerShell ]
**Alat untuk PowerShell V4**
**Contoh 1: Membuat zona host baru bernama 'example.com', terkait dengan kumpulan delegasi yang dapat digunakan kembali. Perhatikan bahwa Anda harus memberikan nilai untuk CallerReference parameter sehingga permintaan yang perlu dicoba lagi jika perlu tanpa risiko mengeksekusi operasi dua kali. Karena zona yang dihosting sedang dibuat di VPC, zona ini secara otomatis bersifat pribadi dan Anda tidak boleh mengatur parameter - HostedZoneConfig \$1PrivateZone .**
```
$params = @{
Name="example.com"
CallerReference="myUniqueIdentifier"
HostedZoneConfig_Comment="This is my first hosted zone"
DelegationSetId="NZ8X2CISAMPLE"
VPC_VPCId="vpc-1a2b3c4d"
VPC_VPCRegion="us-east-1"
}
New-R53HostedZone @params
```
+ Untuk detail API, lihat [CreateHostedZone](https://docs.aws.amazon.com/powershell/v4/reference)di *Referensi Alat AWS untuk PowerShell Cmdlet (V4)*.
**Alat untuk PowerShell V5**
**Contoh 1: Membuat zona host baru bernama 'example.com', terkait dengan kumpulan delegasi yang dapat digunakan kembali. Perhatikan bahwa Anda harus memberikan nilai untuk CallerReference parameter sehingga permintaan yang perlu dicoba lagi jika perlu tanpa risiko mengeksekusi operasi dua kali. Karena zona yang dihosting sedang dibuat di VPC, zona ini secara otomatis bersifat pribadi dan Anda tidak boleh mengatur parameter - HostedZoneConfig \$1PrivateZone .**
```
$params = @{
Name="example.com"
CallerReference="myUniqueIdentifier"
HostedZoneConfig_Comment="This is my first hosted zone"
DelegationSetId="NZ8X2CISAMPLE"
VPC_VPCId="vpc-1a2b3c4d"
VPC_VPCRegion="us-east-1"
}
New-R53HostedZone @params
```
+ Untuk detail API, lihat [CreateHostedZone](https://docs.aws.amazon.com/powershell/v5/reference)di *Referensi Alat AWS untuk PowerShell Cmdlet (V5)*.
------
Untuk daftar lengkap panduan pengembang AWS SDK dan contoh kode, lihat[Menggunakan Route 53 dengan AWS SDK](sdk-general-information-section.md). Topik ini juga mencakup informasi tentang memulai dan detail tentang versi SDK sebelumnya.
# Gunakan `DeleteHostedZone` dengan CLI
Contoh kode berikut menunjukkan cara menggunakan`DeleteHostedZone`.
------
#### [ CLI ]
**AWS CLI**
**Untuk menghapus zona yang dihosting**
`delete-hosted-zone`Perintah berikut menghapus zona yang dihosting dengan `id` dari`Z36KTIQEXAMPLE`:
```
aws route53 delete-hosted-zone --id Z36KTIQEXAMPLE
```
+ Untuk detail API, lihat [DeleteHostedZone](https://awscli.amazonaws.com/v2/documentation/api/latest/reference/route53/delete-hosted-zone.html)di *Referensi AWS CLI Perintah*.
------
#### [ PowerShell ]
**Alat untuk PowerShell V4**
**Contoh 1: Menghapus zona yang dihosting dengan ID yang ditentukan. Anda akan diminta konfirmasi sebelum perintah dilanjutkan kecuali Anda menambahkan parameter sakelar -Force.**
```
Remove-R53HostedZone -Id Z1PA6795UKMFR9
```
+ Untuk detail API, lihat [DeleteHostedZone](https://docs.aws.amazon.com/powershell/v4/reference)di *Referensi Alat AWS untuk PowerShell Cmdlet (V4)*.
**Alat untuk PowerShell V5**
**Contoh 1: Menghapus zona yang dihosting dengan ID yang ditentukan. Anda akan diminta konfirmasi sebelum perintah dilanjutkan kecuali Anda menambahkan parameter sakelar -Force.**
```
Remove-R53HostedZone -Id Z1PA6795UKMFR9
```
+ Untuk detail API, lihat [DeleteHostedZone](https://docs.aws.amazon.com/powershell/v5/reference)di *Referensi Alat AWS untuk PowerShell Cmdlet (V5)*.
------
Untuk daftar lengkap panduan pengembang AWS SDK dan contoh kode, lihat[Menggunakan Route 53 dengan AWS SDK](sdk-general-information-section.md). Topik ini juga mencakup informasi tentang memulai dan detail tentang versi SDK sebelumnya.
# Gunakan `GetHostedZone` dengan CLI
Contoh kode berikut menunjukkan cara menggunakan`GetHostedZone`.
------
#### [ CLI ]
**AWS CLI**
**Untuk mendapatkan informasi tentang zona yang dihosting**
`get-hosted-zone`Perintah berikut mendapatkan informasi tentang zona yang dihosting dengan `id` dari`Z1R8UBAEXAMPLE`:
```
aws route53 get-hosted-zone --id Z1R8UBAEXAMPLE
```
+ Untuk detail API, lihat [GetHostedZone](https://awscli.amazonaws.com/v2/documentation/api/latest/reference/route53/get-hosted-zone.html)di *Referensi AWS CLI Perintah*.
------
#### [ PowerShell ]
**Alat untuk PowerShell V4**
**Contoh 1: Mengembalikan rincian zona yang dihosting dengan ID PJN98 FT9 Z1D633.**
```
Get-R53HostedZone -Id Z1D633PJN98FT9
```
+ Untuk detail API, lihat [GetHostedZone](https://docs.aws.amazon.com/powershell/v4/reference)di *Referensi Alat AWS untuk PowerShell Cmdlet (V4)*.
**Alat untuk PowerShell V5**
**Contoh 1: Mengembalikan rincian zona yang dihosting dengan ID PJN98 FT9 Z1D633.**
```
Get-R53HostedZone -Id Z1D633PJN98FT9
```
+ Untuk detail API, lihat [GetHostedZone](https://docs.aws.amazon.com/powershell/v5/reference)di *Referensi Alat AWS untuk PowerShell Cmdlet (V5)*.
------
Untuk daftar lengkap panduan pengembang AWS SDK dan contoh kode, lihat[Menggunakan Route 53 dengan AWS SDK](sdk-general-information-section.md). Topik ini juga mencakup informasi tentang memulai dan detail tentang versi SDK sebelumnya.
# Gunakan `ListHostedZones` dengan AWS SDK atau CLI
Contoh kode berikut menunjukkan cara menggunakan`ListHostedZones`.
------
#### [ CLI ]
**AWS CLI**
**Untuk membuat daftar zona yang dihosting yang terkait dengan AWS akun saat ini**
`list-hosted-zones`Perintah berikut mencantumkan informasi ringkasan tentang 100 zona host pertama yang terkait dengan AWS akun saat ini. :
```
aws route53 list-hosted-zones
```
Jika Anda memiliki lebih dari 100 zona yang dihosting, atau jika Anda ingin mencantumkannya dalam grup yang lebih kecil dari 100, sertakan `--max-items` parameternya. Misalnya, untuk membuat daftar zona yang dihosting satu per satu, gunakan perintah berikut:
```
aws route53 list-hosted-zones --max-items 1
```
Untuk melihat informasi tentang zona host berikutnya, ambil nilai `NextToken` dari respon ke perintah sebelumnya, dan sertakan dalam `--starting-token` parameter, misalnya:
```
aws route53 list-hosted-zones --max-items 1 --starting-token Z3M3LMPEXAMPLE
```
+ Untuk detail API, lihat [ListHostedZones](https://awscli.amazonaws.com/v2/documentation/api/latest/reference/route53/list-hosted-zones.html)di *Referensi AWS CLI Perintah*.
------
#### [ PowerShell ]
**Alat untuk PowerShell V4**
**Contoh 1: Mengeluarkan semua zona host publik dan pribadi Anda.**
```
Get-R53HostedZoneList
```
**Contoh 2: Mengeluarkan semua zona yang dihosting yang terkait dengan kumpulan delegasi yang dapat digunakan kembali yang memiliki ID X2CISAMPLE NZ8**
```
Get-R53HostedZoneList -DelegationSetId NZ8X2CISAMPLE
```
+ Untuk detail API, lihat [ListHostedZones](https://docs.aws.amazon.com/powershell/v4/reference)di *Referensi Alat AWS untuk PowerShell Cmdlet (V4)*.
**Alat untuk PowerShell V5**
**Contoh 1: Mengeluarkan semua zona host publik dan pribadi Anda.**
```
Get-R53HostedZoneList
```
**Contoh 2: Mengeluarkan semua zona yang dihosting yang terkait dengan kumpulan delegasi yang dapat digunakan kembali yang memiliki ID X2CISAMPLE NZ8**
```
Get-R53HostedZoneList -DelegationSetId NZ8X2CISAMPLE
```
+ Untuk detail API, lihat [ListHostedZones](https://docs.aws.amazon.com/powershell/v5/reference)di *Referensi Alat AWS untuk PowerShell Cmdlet (V5)*.
------
#### [ Rust ]
**SDK for Rust**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/rustv1/examples/route53#code-examples).
```
async fn show_host_info(client: &aws_sdk_route53::Client) -> Result<(), aws_sdk_route53::Error> {
let hosted_zone_count = client.get_hosted_zone_count().send().await?;
println!(
"Number of hosted zones in region : {}",
hosted_zone_count.hosted_zone_count(),
);
let hosted_zones = client.list_hosted_zones().send().await?;
println!("Zones:");
for hz in hosted_zones.hosted_zones() {
let zone_name = hz.name();
let zone_id = hz.id();
println!(" ID : {}", zone_id);
println!(" Name : {}", zone_name);
println!();
}
Ok(())
}
```
+ Untuk detail API, lihat [ListHostedZones](https://docs.rs/aws-sdk-route53/latest/aws_sdk_route53/client/struct.Client.html#method.list_hosted_zones)*referensi AWS SDK for Rust API*.
------
Untuk daftar lengkap panduan pengembang AWS SDK dan contoh kode, lihat[Menggunakan Route 53 dengan AWS SDK](sdk-general-information-section.md). Topik ini juga mencakup informasi tentang memulai dan detail tentang versi SDK sebelumnya.
# Gunakan `ListHostedZonesByName` dengan CLI
Contoh kode berikut menunjukkan cara menggunakan`ListHostedZonesByName`.
------
#### [ CLI ]
**AWS CLI**
Perintah berikut mencantumkan hingga 100 zona yang dihosting yang diurutkan berdasarkan nama domain:
```
aws route53 list-hosted-zones-by-name
```
Output:
```
{
"HostedZones": [
{
"ResourceRecordSetCount": 2,
"CallerReference": "test20150527-2",
"Config": {
"Comment": "test2",
"PrivateZone": false
},
"Id": "/hostedzone/Z119WBBTVP5WFX",
"Name": "2.example.com."
},
{
"ResourceRecordSetCount": 2,
"CallerReference": "test20150527-1",
"Config": {
"Comment": "test",
"PrivateZone": false
},
"Id": "/hostedzone/Z3P5QSUBK4POTI",
"Name": "www.example.com."
}
],
"IsTruncated": false,
"MaxItems": "100"
}
```
Perintah berikut mencantumkan zona yang dihosting yang diurutkan berdasarkan nama, dimulai dengan`www.example.com`:
```
aws route53 list-hosted-zones-by-name --dns-name www.example.com
```
Output:
```
{
"HostedZones": [
{
"ResourceRecordSetCount": 2,
"CallerReference": "mwunderl20150527-1",
"Config": {
"Comment": "test",
"PrivateZone": false
},
"Id": "/hostedzone/Z3P5QSUBK4POTI",
"Name": "www.example.com."
}
],
"DNSName": "www.example.com",
"IsTruncated": false,
"MaxItems": "100"
}
```
+ Untuk detail API, lihat [ListHostedZonesByName](https://awscli.amazonaws.com/v2/documentation/api/latest/reference/route53/list-hosted-zones-by-name.html)di *Referensi AWS CLI Perintah*.
------
#### [ PowerShell ]
**Alat untuk PowerShell V4**
**Contoh 1: Mengembalikan semua zona host publik dan pribadi Anda dalam urutan ASCII berdasarkan nama domain.**
```
Get-R53HostedZonesByName
```
**Contoh 2: Mengembalikan zona host publik dan pribadi Anda, dalam urutan ASCII berdasarkan nama domain, dimulai dari nama DNS yang ditentukan.**
```
Get-R53HostedZonesByName -DnsName example2.com
```
+ Untuk detail API, lihat [ListHostedZonesByName](https://docs.aws.amazon.com/powershell/v4/reference)di *Referensi Alat AWS untuk PowerShell Cmdlet (V4)*.
**Alat untuk PowerShell V5**
**Contoh 1: Mengembalikan semua zona host publik dan pribadi Anda dalam urutan ASCII berdasarkan nama domain.**
```
Get-R53HostedZonesByName
```
**Contoh 2: Mengembalikan zona host publik dan pribadi Anda, dalam urutan ASCII berdasarkan nama domain, dimulai dari nama DNS yang ditentukan.**
```
Get-R53HostedZonesByName -DnsName example2.com
```
+ Untuk detail API, lihat [ListHostedZonesByName](https://docs.aws.amazon.com/powershell/v5/reference)di *Referensi Alat AWS untuk PowerShell Cmdlet (V5)*.
------
Untuk daftar lengkap panduan pengembang AWS SDK dan contoh kode, lihat[Menggunakan Route 53 dengan AWS SDK](sdk-general-information-section.md). Topik ini juga mencakup informasi tentang memulai dan detail tentang versi SDK sebelumnya.
# Gunakan `ListQueryLoggingConfigs` dengan CLI
Contoh kode berikut menunjukkan cara menggunakan`ListQueryLoggingConfigs`.
------
#### [ CLI ]
**AWS CLI**
**Untuk membuat daftar konfigurasi pencatatan kueri**
`list-query-logging-configs`Contoh berikut mencantumkan informasi tentang 100 konfigurasi pencatatan kueri pertama di AWS akun Anda, untuk zona `Z1OX3WQEXAMPLE` yang dihosting.
```
aws route53 list-query-logging-configs \
--hosted-zone-id Z1OX3WQEXAMPLE
```
Output:
```
{
"QueryLoggingConfigs": [
{
"Id": "964ff34e-ae03-4f06-80a2-9683cexample",
"HostedZoneId": "Z1OX3WQEXAMPLE",
"CloudWatchLogsLogGroupArn": "arn:aws:logs:us-east-1:111122223333:log-group:/aws/route53/example.com:*"
}
]
}
```
Untuk informasi selengkapnya, lihat [Mencatat kueri DNS di Panduan](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/query-logs.html) *Pengembang Amazon Route 53*.
+ Untuk detail API, lihat [ListQueryLoggingConfigs](https://awscli.amazonaws.com/v2/documentation/api/latest/reference/route53/list-query-logging-configs.html)di *Referensi AWS CLI Perintah*.
------
#### [ PowerShell ]
**Alat untuk PowerShell V4**
**Contoh 1: Contoh ini mengembalikan semua konfigurasi untuk pencatatan kueri DNS yang terkait dengan arus. Akun AWS**
```
Get-R53QueryLoggingConfigList
```
**Output:**
```
Id HostedZoneId CloudWatchLogsLogGroupArn
-- ------------ -------------------------
59b0fa33-4fea-4471-a88c-926476aaa40d Z385PDS6EAAAZR arn:aws:logs:us-east-1:111111111112:log-group:/aws/route53/example1.com:*
ee528e95-4e03-4fdc-9d28-9e24ddaaa063 Z94SJHBV1AAAAZ arn:aws:logs:us-east-1:111111111112:log-group:/aws/route53/example2.com:*
e38dddda-ceb6-45c1-8cb7-f0ae56aaaa2b Z3MEQ8T7AAA1BF arn:aws:logs:us-east-1:111111111112:log-group:/aws/route53/example3.com:*
```
+ Untuk detail API, lihat [ListQueryLoggingConfigs](https://docs.aws.amazon.com/powershell/v4/reference)di *Referensi Alat AWS untuk PowerShell Cmdlet (V4)*.
**Alat untuk PowerShell V5**
**Contoh 1: Contoh ini mengembalikan semua konfigurasi untuk pencatatan kueri DNS yang terkait dengan arus. Akun AWS**
```
Get-R53QueryLoggingConfigList
```
**Output:**
```
Id HostedZoneId CloudWatchLogsLogGroupArn
-- ------------ -------------------------
59b0fa33-4fea-4471-a88c-926476aaa40d Z385PDS6EAAAZR arn:aws:logs:us-east-1:111111111112:log-group:/aws/route53/example1.com:*
ee528e95-4e03-4fdc-9d28-9e24ddaaa063 Z94SJHBV1AAAAZ arn:aws:logs:us-east-1:111111111112:log-group:/aws/route53/example2.com:*
e38dddda-ceb6-45c1-8cb7-f0ae56aaaa2b Z3MEQ8T7AAA1BF arn:aws:logs:us-east-1:111111111112:log-group:/aws/route53/example3.com:*
```
+ Untuk detail API, lihat [ListQueryLoggingConfigs](https://docs.aws.amazon.com/powershell/v5/reference)di *Referensi Alat AWS untuk PowerShell Cmdlet (V5)*.
------
Untuk daftar lengkap panduan pengembang AWS SDK dan contoh kode, lihat[Menggunakan Route 53 dengan AWS SDK](sdk-general-information-section.md). Topik ini juga mencakup informasi tentang memulai dan detail tentang versi SDK sebelumnya.
# Contoh kode untuk pendaftaran domain Route 53 menggunakan AWS SDKs
Contoh kode berikut menunjukkan cara menggunakan pendaftaran domain Route 53 dengan kit pengembangan AWS perangkat lunak (SDK).
*Dasar-dasar* adalah contoh kode yang menunjukkan kepada Anda bagaimana melakukan operasi penting dalam suatu layanan.
*Tindakan* merupakan kutipan kode dari program yang lebih besar dan harus dijalankan dalam konteks. Sementara tindakan menunjukkan cara memanggil fungsi layanan individual, Anda dapat melihat tindakan dalam konteks dalam skenario terkait.
Untuk daftar lengkap panduan pengembang AWS SDK dan contoh kode, lihat[Menggunakan Route 53 dengan AWS SDK](sdk-general-information-section.md). Topik ini juga mencakup informasi tentang memulai dan detail tentang versi SDK sebelumnya.
**Contents**
+ [Hal-hal mendasar](service_code_examples_route-53-domains_basics.md)
+ [Hello Route 53 pendaftaran domain](route-53-domains_example_route-53-domains_Hello_section.md)
+ [Pelajari dasar-dasarnya](route-53-domains_example_route-53-domains_Scenario_GetStartedRoute53Domains_section.md)
+ [Tindakan](service_code_examples_route-53-domains_actions.md)
+ [`CheckDomainAvailability`](route-53-domains_example_route-53-domains_CheckDomainAvailability_section.md)
+ [`CheckDomainTransferability`](route-53-domains_example_route-53-domains_CheckDomainTransferability_section.md)
+ [`GetDomainDetail`](route-53-domains_example_route-53-domains_GetDomainDetail_section.md)
+ [`GetDomainSuggestions`](route-53-domains_example_route-53-domains_GetDomainSuggestions_section.md)
+ [`GetOperationDetail`](route-53-domains_example_route-53-domains_GetOperationDetail_section.md)
+ [`ListDomains`](route-53-domains_example_route-53-domains_ListDomains_section.md)
+ [`ListOperations`](route-53-domains_example_route-53-domains_ListOperations_section.md)
+ [`ListPrices`](route-53-domains_example_route-53-domains_ListPrices_section.md)
+ [`RegisterDomain`](route-53-domains_example_route-53-domains_RegisterDomain_section.md)
+ [`ViewBilling`](route-53-domains_example_route-53-domains_ViewBilling_section.md)
# Contoh dasar untuk pendaftaran domain Route 53 menggunakan AWS SDKs
Contoh kode berikut menunjukkan cara menggunakan dasar-dasar Amazon Route 53 domain registration dengan AWS SDKs.
**Contents**
+ [Hello Route 53 pendaftaran domain](route-53-domains_example_route-53-domains_Hello_section.md)
+ [Pelajari dasar-dasarnya](route-53-domains_example_route-53-domains_Scenario_GetStartedRoute53Domains_section.md)
+ [Tindakan](service_code_examples_route-53-domains_actions.md)
+ [`CheckDomainAvailability`](route-53-domains_example_route-53-domains_CheckDomainAvailability_section.md)
+ [`CheckDomainTransferability`](route-53-domains_example_route-53-domains_CheckDomainTransferability_section.md)
+ [`GetDomainDetail`](route-53-domains_example_route-53-domains_GetDomainDetail_section.md)
+ [`GetDomainSuggestions`](route-53-domains_example_route-53-domains_GetDomainSuggestions_section.md)
+ [`GetOperationDetail`](route-53-domains_example_route-53-domains_GetOperationDetail_section.md)
+ [`ListDomains`](route-53-domains_example_route-53-domains_ListDomains_section.md)
+ [`ListOperations`](route-53-domains_example_route-53-domains_ListOperations_section.md)
+ [`ListPrices`](route-53-domains_example_route-53-domains_ListPrices_section.md)
+ [`RegisterDomain`](route-53-domains_example_route-53-domains_RegisterDomain_section.md)
+ [`ViewBilling`](route-53-domains_example_route-53-domains_ViewBilling_section.md)
# Hello Route 53 pendaftaran domain
Contoh kode berikut menunjukkan cara memulai menggunakan pendaftaran domain Route 53.
------
#### [ .NET ]
**SDK untuk .NET**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/dotnetv3/Route53#code-examples).
```
public static class HelloRoute53Domains
{
static async Task Main(string[] args)
{
// Use the AWS .NET Core Setup package to set up dependency injection for the Amazon Route 53 domain registration service.
// Use your AWS profile name, or leave it blank to use the default profile.
using var host = Host.CreateDefaultBuilder(args)
.ConfigureServices((_, services) =>
services.AddAWSService()
).Build();
// Now the client is available for injection.
var route53Client = host.Services.GetRequiredService();
// You can use await and any of the async methods to get a response.
var response = await route53Client.ListPricesAsync(new ListPricesRequest { Tld = "com" });
Console.WriteLine($"Hello Amazon Route 53 Domains! Following are prices for .com domain operations:");
var comPrices = response.Prices.FirstOrDefault();
if (comPrices != null)
{
Console.WriteLine($"\tRegistration: {comPrices.RegistrationPrice?.Price} {comPrices.RegistrationPrice?.Currency}");
Console.WriteLine($"\tRenewal: {comPrices.RenewalPrice?.Price} {comPrices.RenewalPrice?.Currency}");
}
}
}
```
+ Untuk detail API, lihat [ListPrices](https://docs.aws.amazon.com/goto/DotNetSDKV3/route53domains-2014-05-15/ListPrices)di *Referensi AWS SDK untuk .NET API*.
------
#### [ Java ]
**SDK untuk Java 2.x**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/javav2/example_code/route53#code-examples).
```
import software.amazon.awssdk.regions.Region;
import software.amazon.awssdk.services.route53domains.Route53DomainsClient;
import software.amazon.awssdk.services.route53.model.Route53Exception;
import software.amazon.awssdk.services.route53domains.model.DomainPrice;
import software.amazon.awssdk.services.route53domains.model.ListPricesRequest;
import software.amazon.awssdk.services.route53domains.model.ListPricesResponse;
import java.util.List;
/**
* Before running this Java V2 code example, set up your development
* environment, including your credentials.
*
* For more information, see the following documentation topic:
*
* https://docs.aws.amazon.com/sdk-for-java/latest/developer-guide/get-started.html
*
* This Java code examples performs the following operation:
*
* 1. Invokes ListPrices for at least one domain type, such as the “com” type
* and displays the prices for Registration and Renewal.
*
*/
public class HelloRoute53 {
public static final String DASHES = new String(new char[80]).replace("\0", "-");
public static void main(String[] args) {
final String usage = "\n" +
"Usage:\n" +
" \n\n" +
"Where:\n" +
" hostedZoneId - The id value of an existing hosted zone. \n";
if (args.length != 1) {
System.out.println(usage);
System.exit(1);
}
String domainType = args[0];
Region region = Region.US_EAST_1;
Route53DomainsClient route53DomainsClient = Route53DomainsClient.builder()
.region(region)
.build();
System.out.println(DASHES);
System.out.println("Invokes ListPrices for at least one domain type.");
listPrices(route53DomainsClient, domainType);
System.out.println(DASHES);
}
public static void listPrices(Route53DomainsClient route53DomainsClient, String domainType) {
try {
ListPricesRequest pricesRequest = ListPricesRequest.builder()
.maxItems(10)
.tld(domainType)
.build();
ListPricesResponse response = route53DomainsClient.listPrices(pricesRequest);
List prices = response.prices();
for (DomainPrice pr : prices) {
System.out.println("Name: " + pr.name());
System.out.println(
"Registration: " + pr.registrationPrice().price() + " " + pr.registrationPrice().currency());
System.out.println("Renewal: " + pr.renewalPrice().price() + " " + pr.renewalPrice().currency());
System.out.println("Transfer: " + pr.transferPrice().price() + " " + pr.transferPrice().currency());
System.out.println("Transfer: " + pr.transferPrice().price() + " " + pr.transferPrice().currency());
System.out.println("Change Ownership: " + pr.changeOwnershipPrice().price() + " "
+ pr.changeOwnershipPrice().currency());
System.out.println(
"Restoration: " + pr.restorationPrice().price() + " " + pr.restorationPrice().currency());
System.out.println(" ");
}
} catch (Route53Exception e) {
System.err.println(e.getMessage());
System.exit(1);
}
}
}
```
+ Untuk detail API, lihat [ListPrices](https://docs.aws.amazon.com/goto/SdkForJavaV2/route53domains-2014-05-15/ListPrices)di *Referensi AWS SDK for Java 2.x API*.
------
#### [ Kotlin ]
**SDK untuk Kotlin**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/kotlin/services/route53#code-examples).
```
/**
Before running this Kotlin code example, set up your development environment,
including your credentials.
For more information, see the following documentation topic:
https://docs.aws.amazon.com/sdk-for-kotlin/latest/developer-guide/setup.html
*/
suspend fun main(args: Array) {
val usage = """
Usage:
Where:
domainType - The domain type (for example, com).
"""
if (args.size != 1) {
println(usage)
exitProcess(0)
}
val domainType = args[0]
println("Invokes ListPrices using a Paginated method.")
listPricesPaginated(domainType)
}
suspend fun listPricesPaginated(domainType: String) {
val pricesRequest =
ListPricesRequest {
maxItems = 10
tld = domainType
}
Route53DomainsClient.fromEnvironment { region = "us-east-1" }.use { route53DomainsClient ->
route53DomainsClient
.listPricesPaginated(pricesRequest)
.transform { it.prices?.forEach { obj -> emit(obj) } }
.collect { pr ->
println("Registration: ${pr.registrationPrice} ${pr.registrationPrice?.currency}")
println("Renewal: ${pr.renewalPrice?.price} ${pr.renewalPrice?.currency}")
println("Transfer: ${pr.transferPrice?.price} ${pr.transferPrice?.currency}")
println("Restoration: ${pr.restorationPrice?.price} ${pr.restorationPrice?.currency}")
}
}
}
```
+ Untuk detail API, lihat [ListPrices](https://sdk.amazonaws.com/kotlin/api/latest/index.html)di *AWS SDK untuk referensi API Kotlin*.
------
Untuk daftar lengkap panduan pengembang AWS SDK dan contoh kode, lihat[Menggunakan Route 53 dengan AWS SDK](sdk-general-information-section.md). Topik ini juga mencakup informasi tentang memulai dan detail tentang versi SDK sebelumnya.
# Pelajari dasar-dasar pendaftaran domain Route 53 dengan AWS SDK
Contoh-contoh kode berikut menunjukkan cara:
+ Buat daftar domain saat ini, dan daftar operasi dalam satu tahun terakhir.
+ Lihat tagihan selama setahun terakhir, dan lihat harga untuk jenis domain.
+ Dapatkan saran domain.
+ Periksa ketersediaan domain dan transferabilitas.
+ Secara opsional, minta pendaftaran domain.
+ Dapatkan detail operasi.
+ Secara opsional, dapatkan detail domain.
------
#### [ .NET ]
**SDK untuk .NET**
Ada lebih banyak tentang GitHub. Temukan contoh lengkap dan pelajari cara menyiapkan dan menjalankan di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/dotnetv3/Route53#code-examples).
Jalankan skenario interaktif di penggugah/prompt perintah.
```
public static class Route53DomainScenario
{
/*
Before running this .NET code example, set up your development environment, including your credentials.
This .NET example performs the following tasks:
1. List current domains.
2. List operations in the past year.
3. View billing for the account in the past year.
4. View prices for domain types.
5. Get domain suggestions.
6. Check domain availability.
7. Check domain transferability.
8. Optionally, request a domain registration.
9. Get an operation detail.
10. Optionally, get a domain detail.
*/
private static Route53Wrapper _route53Wrapper = null!;
private static IConfiguration _configuration = null!;
static async Task Main(string[] args)
{
// Set up dependency injection for the Amazon service.
using var host = Host.CreateDefaultBuilder(args)
.ConfigureLogging(logging =>
logging.AddFilter("System", LogLevel.Debug)
.AddFilter("Microsoft", LogLevel.Information)
.AddFilter("Microsoft", LogLevel.Trace))
.ConfigureServices((_, services) =>
services.AddAWSService()
.AddTransient()
)
.Build();
_configuration = new ConfigurationBuilder()
.SetBasePath(Directory.GetCurrentDirectory())
.AddJsonFile("settings.json") // Load settings from .json file.
.AddJsonFile("settings.local.json",
true) // Optionally, load local settings.
.Build();
var logger = LoggerFactory.Create(builder =>
{
builder.AddConsole();
}).CreateLogger(typeof(Route53DomainScenario));
_route53Wrapper = host.Services.GetRequiredService();
Console.WriteLine(new string('-', 80));
Console.WriteLine("Welcome to the Amazon Route 53 domains example scenario.");
Console.WriteLine(new string('-', 80));
try
{
await ListDomains();
await ListOperations();
await ListBillingRecords();
await ListPrices();
await ListDomainSuggestions();
await CheckDomainAvailability();
await CheckDomainTransferability();
var operationId = await RequestDomainRegistration();
await GetOperationalDetail(operationId);
await GetDomainDetails();
}
catch (Exception ex)
{
logger.LogError(ex, "There was a problem executing the scenario.");
}
Console.WriteLine(new string('-', 80));
Console.WriteLine("The Amazon Route 53 domains example scenario is complete.");
Console.WriteLine(new string('-', 80));
}
///
/// List account registered domains.
///
/// Async task.
private static async Task ListDomains()
{
Console.WriteLine(new string('-', 80));
Console.WriteLine($"1. List account domains.");
var domains = await _route53Wrapper.ListDomains();
for (int i = 0; i < domains.Count; i++)
{
Console.WriteLine($"\t{i + 1}. {domains[i].DomainName}");
}
if (!domains.Any())
{
Console.WriteLine("\tNo domains found in this account.");
}
Console.WriteLine(new string('-', 80));
}
///
/// List domain operations in the past year.
///
/// Async task.
private static async Task ListOperations()
{
Console.WriteLine(new string('-', 80));
Console.WriteLine($"2. List account domain operations in the past year.");
var operations = await _route53Wrapper.ListOperations(
DateTime.Today.AddYears(-1));
for (int i = 0; i < operations.Count; i++)
{
Console.WriteLine($"\tOperation Id: {operations[i].OperationId}");
Console.WriteLine($"\tStatus: {operations[i].Status}");
Console.WriteLine($"\tDate: {operations[i].SubmittedDate}");
}
Console.WriteLine(new string('-', 80));
}
///
/// List billing in the past year.
///
/// Async task.
private static async Task ListBillingRecords()
{
Console.WriteLine(new string('-', 80));
Console.WriteLine($"3. View billing for the account in the past year.");
var billingRecords = await _route53Wrapper.ViewBilling(
DateTime.Today.AddYears(-1),
DateTime.Today);
for (int i = 0; i < billingRecords.Count; i++)
{
Console.WriteLine($"\tBill Date: {billingRecords[i].BillDate.ToShortDateString()}");
Console.WriteLine($"\tOperation: {billingRecords[i].Operation}");
Console.WriteLine($"\tPrice: {billingRecords[i].Price}");
}
if (!billingRecords.Any())
{
Console.WriteLine("\tNo billing records found in this account for the past year.");
}
Console.WriteLine(new string('-', 80));
}
///
/// List prices for a few domain types.
///
/// Async task.
private static async Task ListPrices()
{
Console.WriteLine(new string('-', 80));
Console.WriteLine($"4. View prices for domain types.");
var domainTypes = new List { "net", "com", "org", "co" };
var prices = await _route53Wrapper.ListPrices(domainTypes);
foreach (var pr in prices)
{
Console.WriteLine($"\tName: {pr.Name}");
Console.WriteLine($"\tRegistration: {pr.RegistrationPrice?.Price} {pr.RegistrationPrice?.Currency}");
Console.WriteLine($"\tRenewal: {pr.RenewalPrice?.Price} {pr.RenewalPrice?.Currency}");
Console.WriteLine($"\tTransfer: {pr.TransferPrice?.Price} {pr.TransferPrice?.Currency}");
Console.WriteLine($"\tChange Ownership: {pr.ChangeOwnershipPrice?.Price} {pr.ChangeOwnershipPrice?.Currency}");
Console.WriteLine($"\tRestoration: {pr.RestorationPrice?.Price} {pr.RestorationPrice?.Currency}");
Console.WriteLine();
}
Console.WriteLine(new string('-', 80));
}
///
/// List domain suggestions for a domain name.
///
/// Async task.
private static async Task ListDomainSuggestions()
{
Console.WriteLine(new string('-', 80));
Console.WriteLine($"5. Get domain suggestions.");
string? domainName = null;
while (domainName == null || string.IsNullOrWhiteSpace(domainName))
{
Console.WriteLine($"Enter a domain name to get available domain suggestions.");
domainName = Console.ReadLine();
}
var suggestions = await _route53Wrapper.GetDomainSuggestions(domainName, true, 5);
foreach (var suggestion in suggestions)
{
Console.WriteLine($"\tSuggestion Name: {suggestion.DomainName}");
Console.WriteLine($"\tAvailability: {suggestion.Availability}");
}
Console.WriteLine(new string('-', 80));
}
///
/// Check availability for a domain name.
///
/// Async task.
private static async Task CheckDomainAvailability()
{
Console.WriteLine(new string('-', 80));
Console.WriteLine($"6. Check domain availability.");
string? domainName = null;
while (domainName == null || string.IsNullOrWhiteSpace(domainName))
{
Console.WriteLine($"Enter a domain name to check domain availability.");
domainName = Console.ReadLine();
}
var availability = await _route53Wrapper.CheckDomainAvailability(domainName);
Console.WriteLine($"\tAvailability: {availability}");
Console.WriteLine(new string('-', 80));
}
///
/// Check transferability for a domain name.
///
/// Async task.
private static async Task CheckDomainTransferability()
{
Console.WriteLine(new string('-', 80));
Console.WriteLine($"7. Check domain transferability.");
string? domainName = null;
while (domainName == null || string.IsNullOrWhiteSpace(domainName))
{
Console.WriteLine($"Enter a domain name to check domain transferability.");
domainName = Console.ReadLine();
}
var transferability = await _route53Wrapper.CheckDomainTransferability(domainName);
Console.WriteLine($"\tTransferability: {transferability}");
Console.WriteLine(new string('-', 80));
}
///
/// Check transferability for a domain name.
///
/// Async task.
private static async Task RequestDomainRegistration()
{
Console.WriteLine(new string('-', 80));
Console.WriteLine($"8. Optionally, request a domain registration.");
Console.WriteLine($"\tNote: This example uses domain request settings in settings.json.");
Console.WriteLine($"\tTo change the domain registration settings, set the values in that file.");
Console.WriteLine($"\tRemember, registering an actual domain will incur an account billing cost.");
Console.WriteLine($"\tWould you like to begin a domain registration? (y/n)");
var ynResponse = Console.ReadLine();
if (ynResponse != null && ynResponse.Equals("y", StringComparison.InvariantCultureIgnoreCase))
{
string domainName = _configuration["DomainName"];
ContactDetail contact = new ContactDetail();
contact.CountryCode = CountryCode.FindValue(_configuration["Contact:CountryCode"]);
contact.ContactType = ContactType.FindValue(_configuration["Contact:ContactType"]);
_configuration.GetSection("Contact").Bind(contact);
var operationId = await _route53Wrapper.RegisterDomain(
domainName,
Convert.ToBoolean(_configuration["AutoRenew"]),
Convert.ToInt32(_configuration["DurationInYears"]),
contact);
if (operationId != null)
{
Console.WriteLine(
$"\tRegistration requested. Operation Id: {operationId}");
}
return operationId;
}
Console.WriteLine(new string('-', 80));
return null;
}
///
/// Get details for an operation.
///
/// Async task.
private static async Task GetOperationalDetail(string? operationId)
{
Console.WriteLine(new string('-', 80));
Console.WriteLine($"9. Get an operation detail.");
var operationDetails =
await _route53Wrapper.GetOperationDetail(operationId);
Console.WriteLine(operationDetails);
Console.WriteLine(new string('-', 80));
}
///
/// Optionally, get details for a registered domain.
///
/// Async task.
private static async Task GetDomainDetails()
{
Console.WriteLine(new string('-', 80));
Console.WriteLine($"10. Get details on a domain.");
Console.WriteLine($"\tNote: you must have a registered domain to get details.");
Console.WriteLine($"\tWould you like to get domain details? (y/n)");
var ynResponse = Console.ReadLine();
if (ynResponse != null && ynResponse.Equals("y", StringComparison.InvariantCultureIgnoreCase))
{
string? domainName = null;
while (domainName == null)
{
Console.WriteLine($"\tEnter a domain name to get details.");
domainName = Console.ReadLine();
}
var domainDetails = await _route53Wrapper.GetDomainDetail(domainName);
Console.WriteLine(domainDetails);
}
Console.WriteLine(new string('-', 80));
return null;
}
}
```
Metode pembungkus yang digunakan oleh skenario untuk tindakan pendaftaran domain Route 53.
```
public class Route53Wrapper
{
private readonly IAmazonRoute53Domains _amazonRoute53Domains;
private readonly ILogger _logger;
public Route53Wrapper(IAmazonRoute53Domains amazonRoute53Domains, ILogger logger)
{
_amazonRoute53Domains = amazonRoute53Domains;
_logger = logger;
}
///
/// List prices for domain type operations.
///
/// Domain types to include in the results.
/// The list of domain prices.
public async Task> ListPrices(List domainTypes)
{
var results = new List();
var paginatePrices = _amazonRoute53Domains.Paginators.ListPrices(new ListPricesRequest());
// Get the entire list using the paginator.
await foreach (var prices in paginatePrices.Prices)
{
results.Add(prices);
}
return results.Where(p => domainTypes.Contains(p.Name)).ToList();
}
///
/// Check the availability of a domain name.
///
/// The domain to check for availability.
/// An availability result string.
public async Task CheckDomainAvailability(string domain)
{
var result = await _amazonRoute53Domains.CheckDomainAvailabilityAsync(
new CheckDomainAvailabilityRequest
{
DomainName = domain
}
);
return result.Availability.Value;
}
///
/// Check the transferability of a domain name.
///
/// The domain to check for transferability.
/// A transferability result string.
public async Task CheckDomainTransferability(string domain)
{
var result = await _amazonRoute53Domains.CheckDomainTransferabilityAsync(
new CheckDomainTransferabilityRequest
{
DomainName = domain
}
);
return result.Transferability.Transferable.Value;
}
///
/// Get a list of suggestions for a given domain.
///
/// The domain to check for suggestions.
/// If true, only returns available domains.
/// The number of suggestions to return. Defaults to the max of 50.
/// A collection of domain suggestions.
public async Task> GetDomainSuggestions(string domain, bool onlyAvailable, int suggestionCount = 50)
{
var result = await _amazonRoute53Domains.GetDomainSuggestionsAsync(
new GetDomainSuggestionsRequest
{
DomainName = domain,
OnlyAvailable = onlyAvailable,
SuggestionCount = suggestionCount
}
);
return result.SuggestionsList;
}
///
/// Get details for a domain action operation.
///
/// The operational Id.
/// A string describing the operational details.
public async Task GetOperationDetail(string? operationId)
{
if (operationId == null)
return "Unable to get operational details because ID is null.";
try
{
var operationDetails =
await _amazonRoute53Domains.GetOperationDetailAsync(
new GetOperationDetailRequest
{
OperationId = operationId
}
);
var details = $"\tOperation {operationId}:\n" +
$"\tFor domain {operationDetails.DomainName} on {operationDetails.SubmittedDate.ToShortDateString()}.\n" +
$"\tMessage is {operationDetails.Message}.\n" +
$"\tStatus is {operationDetails.Status}.\n";
return details;
}
catch (AmazonRoute53DomainsException ex)
{
return $"Unable to get operation details. Here's why: {ex.Message}.";
}
}
///
/// Initiate a domain registration request.
///
/// Contact details.
/// The domain name to register.
/// True if the domain should automatically renew.
/// The duration in years for the domain registration.
/// The operation Id.
public async Task RegisterDomain(string domainName, bool autoRenew, int duration, ContactDetail contact)
{
// This example uses the same contact information for admin, registrant, and tech contacts.
try
{
var result = await _amazonRoute53Domains.RegisterDomainAsync(
new RegisterDomainRequest()
{
AdminContact = contact,
RegistrantContact = contact,
TechContact = contact,
DomainName = domainName,
AutoRenew = autoRenew,
DurationInYears = duration,
PrivacyProtectAdminContact = false,
PrivacyProtectRegistrantContact = false,
PrivacyProtectTechContact = false
}
);
return result.OperationId;
}
catch (InvalidInputException)
{
_logger.LogInformation($"Unable to request registration for domain {domainName}");
return null;
}
}
///
/// View billing records for the account between a start and end date.
///
/// The start date for billing results.
/// The end date for billing results.
/// A collection of billing records.
public async Task> ViewBilling(DateTime startDate, DateTime endDate)
{
var results = new List();
var paginateBilling = _amazonRoute53Domains.Paginators.ViewBilling(
new ViewBillingRequest()
{
Start = startDate,
End = endDate
});
// Get the entire list using the paginator.
await foreach (var billingRecords in paginateBilling.BillingRecords)
{
results.Add(billingRecords);
}
return results;
}
///
/// List the domains for the account.
///
/// A collection of domain summary records.
public async Task> ListDomains()
{
var results = new List();
var paginateDomains = _amazonRoute53Domains.Paginators.ListDomains(
new ListDomainsRequest());
// Get the entire list using the paginator.
await foreach (var domain in paginateDomains.Domains)
{
results.Add(domain);
}
return results;
}
///
/// List operations for the account that are submitted after a specified date.
///
/// A collection of operation summary records.
public async Task> ListOperations(DateTime submittedSince)
{
var results = new List();
var paginateOperations = _amazonRoute53Domains.Paginators.ListOperations(
new ListOperationsRequest()
{
SubmittedSince = submittedSince
});
// Get the entire list using the paginator.
await foreach (var operations in paginateOperations.Operations)
{
results.Add(operations);
}
return results;
}
///
/// Get details for a domain.
///
/// A string with detail information about the domain.
public async Task GetDomainDetail(string domainName)
{
try
{
var result = await _amazonRoute53Domains.GetDomainDetailAsync(
new GetDomainDetailRequest()
{
DomainName = domainName
});
var details = $"\tDomain {domainName}:\n" +
$"\tCreated on {result.CreationDate.ToShortDateString()}.\n" +
$"\tAdmin contact is {result.AdminContact.Email}.\n" +
$"\tAuto-renew is {result.AutoRenew}.\n";
return details;
}
catch (InvalidInputException)
{
return $"Domain {domainName} was not found in your account.";
}
}
}
```
+ Untuk detail API, lihat topik berikut di *Referensi API AWS SDK untuk .NET *.
+ [CheckDomainAvailability](https://docs.aws.amazon.com/goto/DotNetSDKV3/route53domains-2014-05-15/CheckDomainAvailability)
+ [CheckDomainTransferability](https://docs.aws.amazon.com/goto/DotNetSDKV3/route53domains-2014-05-15/CheckDomainTransferability)
+ [GetDomainDetail](https://docs.aws.amazon.com/goto/DotNetSDKV3/route53domains-2014-05-15/GetDomainDetail)
+ [GetDomainSuggestions](https://docs.aws.amazon.com/goto/DotNetSDKV3/route53domains-2014-05-15/GetDomainSuggestions)
+ [GetOperationDetail](https://docs.aws.amazon.com/goto/DotNetSDKV3/route53domains-2014-05-15/GetOperationDetail)
+ [ListDomains](https://docs.aws.amazon.com/goto/DotNetSDKV3/route53domains-2014-05-15/ListDomains)
+ [ListOperations](https://docs.aws.amazon.com/goto/DotNetSDKV3/route53domains-2014-05-15/ListOperations)
+ [ListPrices](https://docs.aws.amazon.com/goto/DotNetSDKV3/route53domains-2014-05-15/ListPrices)
+ [RegisterDomain](https://docs.aws.amazon.com/goto/DotNetSDKV3/route53domains-2014-05-15/RegisterDomain)
+ [ViewBilling](https://docs.aws.amazon.com/goto/DotNetSDKV3/route53domains-2014-05-15/ViewBilling)
------
#### [ Java ]
**SDK untuk Java 2.x**
Ada lebih banyak tentang GitHub. Temukan contoh lengkap dan pelajari cara menyiapkan dan menjalankan di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/javav2/example_code/route53#code-examples).
```
/**
* Before running this Java V2 code example, set up your development
* environment, including your credentials.
*
* For more information, see the following documentation topic:
*
* https://docs.aws.amazon.com/sdk-for-java/latest/developer-guide/get-started.html
*
* This example uses pagination methods where applicable. For example, to list
* domains, the
* listDomainsPaginator method is used. For more information about pagination,
* see the following documentation topic:
*
* https://docs.aws.amazon.com/sdk-for-java/latest/developer-guide/pagination.html
*
* This Java code example performs the following operations:
*
* 1. List current domains.
* 2. List operations in the past year.
* 3. View billing for the account in the past year.
* 4. View prices for domain types.
* 5. Get domain suggestions.
* 6. Check domain availability.
* 7. Check domain transferability.
* 8. Request a domain registration.
* 9. Get operation details.
* 10. Optionally, get domain details.
*/
public class Route53Scenario {
public static final String DASHES = new String(new char[80]).replace("\0", "-");
public static void main(String[] args) {
final String usage = """
Usage:
Where:
domainType - The domain type (for example, com).\s
phoneNumber - The phone number to use (for example, +91.9966564xxx) email - The email address to use. domainSuggestion - The domain suggestion (for example, findmy.accountants).\s
firstName - The first name to use to register a domain.\s
lastName - The last name to use to register a domain.\s
city - the city to use to register a domain.\s
""";
if (args.length != 7) {
System.out.println(usage);
System.exit(1);
}
String domainType = args[0];
String phoneNumber = args[1];
String email = args[2];
String domainSuggestion = args[3];
String firstName = args[4];
String lastName = args[5];
String city = args[6];
Region region = Region.US_EAST_1;
Route53DomainsClient route53DomainsClient = Route53DomainsClient.builder()
.region(region)
.build();
System.out.println(DASHES);
System.out.println("Welcome to the Amazon Route 53 domains example scenario.");
System.out.println(DASHES);
System.out.println(DASHES);
System.out.println("1. List current domains.");
listDomains(route53DomainsClient);
System.out.println(DASHES);
System.out.println(DASHES);
System.out.println("2. List operations in the past year.");
listOperations(route53DomainsClient);
System.out.println(DASHES);
System.out.println(DASHES);
System.out.println("3. View billing for the account in the past year.");
listBillingRecords(route53DomainsClient);
System.out.println(DASHES);
System.out.println(DASHES);
System.out.println("4. View prices for domain types.");
listPrices(route53DomainsClient, domainType);
System.out.println(DASHES);
System.out.println(DASHES);
System.out.println("5. Get domain suggestions.");
listDomainSuggestions(route53DomainsClient, domainSuggestion);
System.out.println(DASHES);
System.out.println(DASHES);
System.out.println("6. Check domain availability.");
checkDomainAvailability(route53DomainsClient, domainSuggestion);
System.out.println(DASHES);
System.out.println(DASHES);
System.out.println("7. Check domain transferability.");
checkDomainTransferability(route53DomainsClient, domainSuggestion);
System.out.println(DASHES);
System.out.println(DASHES);
System.out.println("8. Request a domain registration.");
String opId = requestDomainRegistration(route53DomainsClient, domainSuggestion, phoneNumber, email, firstName,
lastName, city);
System.out.println(DASHES);
System.out.println(DASHES);
System.out.println("9. Get operation details.");
getOperationalDetail(route53DomainsClient, opId);
System.out.println(DASHES);
System.out.println(DASHES);
System.out.println("10. Get domain details.");
System.out.println("Note: You must have a registered domain to get details.");
System.out.println("Otherwise, an exception is thrown that states ");
System.out.println("Domain xxxxxxx not found in xxxxxxx account.");
getDomainDetails(route53DomainsClient, domainSuggestion);
System.out.println(DASHES);
}
public static void getDomainDetails(Route53DomainsClient route53DomainsClient, String domainSuggestion) {
try {
GetDomainDetailRequest detailRequest = GetDomainDetailRequest.builder()
.domainName(domainSuggestion)
.build();
GetDomainDetailResponse response = route53DomainsClient.getDomainDetail(detailRequest);
System.out.println("The contact first name is " + response.registrantContact().firstName());
System.out.println("The contact last name is " + response.registrantContact().lastName());
System.out.println("The contact org name is " + response.registrantContact().organizationName());
} catch (Route53Exception e) {
System.err.println(e.getMessage());
System.exit(1);
}
}
public static void getOperationalDetail(Route53DomainsClient route53DomainsClient, String operationId) {
try {
GetOperationDetailRequest detailRequest = GetOperationDetailRequest.builder()
.operationId(operationId)
.build();
GetOperationDetailResponse response = route53DomainsClient.getOperationDetail(detailRequest);
System.out.println("Operation detail message is " + response.message());
} catch (Route53Exception e) {
System.err.println(e.getMessage());
System.exit(1);
}
}
public static String requestDomainRegistration(Route53DomainsClient route53DomainsClient,
String domainSuggestion,
String phoneNumber,
String email,
String firstName,
String lastName,
String city) {
try {
ContactDetail contactDetail = ContactDetail.builder()
.contactType(ContactType.COMPANY)
.state("LA")
.countryCode(CountryCode.IN)
.email(email)
.firstName(firstName)
.lastName(lastName)
.city(city)
.phoneNumber(phoneNumber)
.organizationName("My Org")
.addressLine1("My Address")
.zipCode("123 123")
.build();
RegisterDomainRequest domainRequest = RegisterDomainRequest.builder()
.adminContact(contactDetail)
.registrantContact(contactDetail)
.techContact(contactDetail)
.domainName(domainSuggestion)
.autoRenew(true)
.durationInYears(1)
.build();
RegisterDomainResponse response = route53DomainsClient.registerDomain(domainRequest);
System.out.println("Registration requested. Operation Id: " + response.operationId());
return response.operationId();
} catch (Route53Exception e) {
System.err.println(e.getMessage());
System.exit(1);
}
return "";
}
public static void checkDomainTransferability(Route53DomainsClient route53DomainsClient, String domainSuggestion) {
try {
CheckDomainTransferabilityRequest transferabilityRequest = CheckDomainTransferabilityRequest.builder()
.domainName(domainSuggestion)
.build();
CheckDomainTransferabilityResponse response = route53DomainsClient
.checkDomainTransferability(transferabilityRequest);
System.out.println("Transferability: " + response.transferability().transferable().toString());
} catch (Route53Exception e) {
System.err.println(e.getMessage());
System.exit(1);
}
}
public static void checkDomainAvailability(Route53DomainsClient route53DomainsClient, String domainSuggestion) {
try {
CheckDomainAvailabilityRequest availabilityRequest = CheckDomainAvailabilityRequest.builder()
.domainName(domainSuggestion)
.build();
CheckDomainAvailabilityResponse response = route53DomainsClient
.checkDomainAvailability(availabilityRequest);
System.out.println(domainSuggestion + " is " + response.availability().toString());
} catch (Route53Exception e) {
System.err.println(e.getMessage());
System.exit(1);
}
}
public static void listDomainSuggestions(Route53DomainsClient route53DomainsClient, String domainSuggestion) {
try {
GetDomainSuggestionsRequest suggestionsRequest = GetDomainSuggestionsRequest.builder()
.domainName(domainSuggestion)
.suggestionCount(5)
.onlyAvailable(true)
.build();
GetDomainSuggestionsResponse response = route53DomainsClient.getDomainSuggestions(suggestionsRequest);
List suggestions = response.suggestionsList();
for (DomainSuggestion suggestion : suggestions) {
System.out.println("Suggestion Name: " + suggestion.domainName());
System.out.println("Availability: " + suggestion.availability());
System.out.println(" ");
}
} catch (Route53Exception e) {
System.err.println(e.getMessage());
System.exit(1);
}
}
public static void listPrices(Route53DomainsClient route53DomainsClient, String domainType) {
try {
ListPricesRequest pricesRequest = ListPricesRequest.builder()
.tld(domainType)
.build();
ListPricesIterable listRes = route53DomainsClient.listPricesPaginator(pricesRequest);
listRes.stream()
.flatMap(r -> r.prices().stream())
.forEach(content -> System.out.println(" Name: " + content.name() +
" Registration: " + content.registrationPrice().price() + " "
+ content.registrationPrice().currency() +
" Renewal: " + content.renewalPrice().price() + " " + content.renewalPrice().currency()));
} catch (Route53Exception e) {
System.err.println(e.getMessage());
System.exit(1);
}
}
public static void listBillingRecords(Route53DomainsClient route53DomainsClient) {
try {
Date currentDate = new Date();
LocalDateTime localDateTime = currentDate.toInstant().atZone(ZoneId.systemDefault()).toLocalDateTime();
ZoneOffset zoneOffset = ZoneOffset.of("+01:00");
LocalDateTime localDateTime2 = localDateTime.minusYears(1);
Instant myStartTime = localDateTime2.toInstant(zoneOffset);
Instant myEndTime = localDateTime.toInstant(zoneOffset);
ViewBillingRequest viewBillingRequest = ViewBillingRequest.builder()
.start(myStartTime)
.end(myEndTime)
.build();
ViewBillingIterable listRes = route53DomainsClient.viewBillingPaginator(viewBillingRequest);
listRes.stream()
.flatMap(r -> r.billingRecords().stream())
.forEach(content -> System.out.println(" Bill Date:: " + content.billDate() +
" Operation: " + content.operationAsString() +
" Price: " + content.price()));
} catch (Route53Exception e) {
System.err.println(e.getMessage());
System.exit(1);
}
}
public static void listOperations(Route53DomainsClient route53DomainsClient) {
try {
Date currentDate = new Date();
LocalDateTime localDateTime = currentDate.toInstant().atZone(ZoneId.systemDefault()).toLocalDateTime();
ZoneOffset zoneOffset = ZoneOffset.of("+01:00");
localDateTime = localDateTime.minusYears(1);
Instant myTime = localDateTime.toInstant(zoneOffset);
ListOperationsRequest operationsRequest = ListOperationsRequest.builder()
.submittedSince(myTime)
.build();
ListOperationsIterable listRes = route53DomainsClient.listOperationsPaginator(operationsRequest);
listRes.stream()
.flatMap(r -> r.operations().stream())
.forEach(content -> System.out.println(" Operation Id: " + content.operationId() +
" Status: " + content.statusAsString() +
" Date: " + content.submittedDate()));
} catch (Route53Exception e) {
System.err.println(e.getMessage());
System.exit(1);
}
}
public static void listDomains(Route53DomainsClient route53DomainsClient) {
try {
ListDomainsIterable listRes = route53DomainsClient.listDomainsPaginator();
listRes.stream()
.flatMap(r -> r.domains().stream())
.forEach(content -> System.out.println("The domain name is " + content.domainName()));
} catch (Route53Exception e) {
System.err.println(e.getMessage());
System.exit(1);
}
}
}
```
+ Untuk detail API, lihat topik berikut di *Referensi API AWS SDK for Java 2.x *.
+ [CheckDomainAvailability](https://docs.aws.amazon.com/goto/SdkForJavaV2/route53domains-2014-05-15/CheckDomainAvailability)
+ [CheckDomainTransferability](https://docs.aws.amazon.com/goto/SdkForJavaV2/route53domains-2014-05-15/CheckDomainTransferability)
+ [GetDomainDetail](https://docs.aws.amazon.com/goto/SdkForJavaV2/route53domains-2014-05-15/GetDomainDetail)
+ [GetDomainSuggestions](https://docs.aws.amazon.com/goto/SdkForJavaV2/route53domains-2014-05-15/GetDomainSuggestions)
+ [GetOperationDetail](https://docs.aws.amazon.com/goto/SdkForJavaV2/route53domains-2014-05-15/GetOperationDetail)
+ [ListDomains](https://docs.aws.amazon.com/goto/SdkForJavaV2/route53domains-2014-05-15/ListDomains)
+ [ListOperations](https://docs.aws.amazon.com/goto/SdkForJavaV2/route53domains-2014-05-15/ListOperations)
+ [ListPrices](https://docs.aws.amazon.com/goto/SdkForJavaV2/route53domains-2014-05-15/ListPrices)
+ [RegisterDomain](https://docs.aws.amazon.com/goto/SdkForJavaV2/route53domains-2014-05-15/RegisterDomain)
+ [ViewBilling](https://docs.aws.amazon.com/goto/SdkForJavaV2/route53domains-2014-05-15/ViewBilling)
------
#### [ Kotlin ]
**SDK untuk Kotlin**
Ada lebih banyak tentang GitHub. Temukan contoh lengkap dan pelajari cara menyiapkan dan menjalankan di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/kotlin/services/route53#code-examples).
```
/**
Before running this Kotlin code example, set up your development environment,
including your credentials.
For more information, see the following documentation topic:
https://docs.aws.amazon.com/sdk-for-kotlin/latest/developer-guide/setup.html
This Kotlin code example performs the following operations:
1. List current domains.
2. List operations in the past year.
3. View billing for the account in the past year.
4. View prices for domain types.
5. Get domain suggestions.
6. Check domain availability.
7. Check domain transferability.
8. Request a domain registration.
9. Get operation details.
10. Optionally, get domain details.
*/
val DASHES: String = String(CharArray(80)).replace("\u0000", "-")
suspend fun main(args: Array) {
val usage = """
Usage:
Where:
domainType - The domain type (for example, com).
phoneNumber - The phone number to use (for example, +1.2065550100)
email - The email address to use.
domainSuggestion - The domain suggestion (for example, findmy.example).
firstName - The first name to use to register a domain.
lastName - The last name to use to register a domain.
city - The city to use to register a domain.
"""
if (args.size != 7) {
println(usage)
exitProcess(1)
}
val domainType = args[0]
val phoneNumber = args[1]
val email = args[2]
val domainSuggestion = args[3]
val firstName = args[4]
val lastName = args[5]
val city = args[6]
println(DASHES)
println("Welcome to the Amazon Route 53 domains example scenario.")
println(DASHES)
println(DASHES)
println("1. List current domains.")
listDomains()
println(DASHES)
println(DASHES)
println("2. List operations in the past year.")
listOperations()
println(DASHES)
println(DASHES)
println("3. View billing for the account in the past year.")
listBillingRecords()
println(DASHES)
println(DASHES)
println("4. View prices for domain types.")
listAllPrices(domainType)
println(DASHES)
println(DASHES)
println("5. Get domain suggestions.")
listDomainSuggestions(domainSuggestion)
println(DASHES)
println(DASHES)
println("6. Check domain availability.")
checkDomainAvailability(domainSuggestion)
println(DASHES)
println(DASHES)
println("7. Check domain transferability.")
checkDomainTransferability(domainSuggestion)
println(DASHES)
println(DASHES)
println("8. Request a domain registration.")
val opId = requestDomainRegistration(domainSuggestion, phoneNumber, email, firstName, lastName, city)
println(DASHES)
println(DASHES)
println("9. Get operation details.")
getOperationalDetail(opId)
println(DASHES)
println(DASHES)
println("10. Get domain details.")
println("Note: You must have a registered domain to get details.")
println("Otherwise an exception is thrown that states ")
println("Domain xxxxxxx not found in xxxxxxx account.")
getDomainDetails(domainSuggestion)
println(DASHES)
}
suspend fun getDomainDetails(domainSuggestion: String?) {
val detailRequest =
GetDomainDetailRequest {
domainName = domainSuggestion
}
Route53DomainsClient.fromEnvironment { region = "us-east-1" }.use { route53DomainsClient ->
val response = route53DomainsClient.getDomainDetail(detailRequest)
println("The contact first name is ${response.registrantContact?.firstName}")
println("The contact last name is ${response.registrantContact?.lastName}")
println("The contact org name is ${response.registrantContact?.organizationName}")
}
}
suspend fun getOperationalDetail(opId: String?) {
val detailRequest =
GetOperationDetailRequest {
operationId = opId
}
Route53DomainsClient.fromEnvironment { region = "us-east-1" }.use { route53DomainsClient ->
val response = route53DomainsClient.getOperationDetail(detailRequest)
println("Operation detail message is ${response.message}")
}
}
suspend fun requestDomainRegistration(
domainSuggestion: String?,
phoneNumberVal: String?,
emailVal: String?,
firstNameVal: String?,
lastNameVal: String?,
cityVal: String?,
): String? {
val contactDetail =
ContactDetail {
contactType = ContactType.Company
state = "LA"
countryCode = CountryCode.In
email = emailVal
firstName = firstNameVal
lastName = lastNameVal
city = cityVal
phoneNumber = phoneNumberVal
organizationName = "My Org"
addressLine1 = "My Address"
zipCode = "123 123"
}
val domainRequest =
RegisterDomainRequest {
adminContact = contactDetail
registrantContact = contactDetail
techContact = contactDetail
domainName = domainSuggestion
autoRenew = true
durationInYears = 1
}
Route53DomainsClient.fromEnvironment { region = "us-east-1" }.use { route53DomainsClient ->
val response = route53DomainsClient.registerDomain(domainRequest)
println("Registration requested. Operation Id: ${response.operationId}")
return response.operationId
}
}
suspend fun checkDomainTransferability(domainSuggestion: String?) {
val transferabilityRequest =
CheckDomainTransferabilityRequest {
domainName = domainSuggestion
}
Route53DomainsClient.fromEnvironment { region = "us-east-1" }.use { route53DomainsClient ->
val response = route53DomainsClient.checkDomainTransferability(transferabilityRequest)
println("Transferability: ${response.transferability?.transferable}")
}
}
suspend fun checkDomainAvailability(domainSuggestion: String) {
val availabilityRequest =
CheckDomainAvailabilityRequest {
domainName = domainSuggestion
}
Route53DomainsClient.fromEnvironment { region = "us-east-1" }.use { route53DomainsClient ->
val response = route53DomainsClient.checkDomainAvailability(availabilityRequest)
println("$domainSuggestion is ${response.availability}")
}
}
suspend fun listDomainSuggestions(domainSuggestion: String?) {
val suggestionsRequest =
GetDomainSuggestionsRequest {
domainName = domainSuggestion
suggestionCount = 5
onlyAvailable = true
}
Route53DomainsClient.fromEnvironment { region = "us-east-1" }.use { route53DomainsClient ->
val response = route53DomainsClient.getDomainSuggestions(suggestionsRequest)
response.suggestionsList?.forEach { suggestion ->
println("Suggestion Name: ${suggestion.domainName}")
println("Availability: ${suggestion.availability}")
println(" ")
}
}
}
suspend fun listAllPrices(domainType: String?) {
val pricesRequest =
ListPricesRequest {
tld = domainType
}
Route53DomainsClient.fromEnvironment { region = "us-east-1" }.use { route53DomainsClient ->
route53DomainsClient
.listPricesPaginated(pricesRequest)
.transform { it.prices?.forEach { obj -> emit(obj) } }
.collect { pr ->
println("Registration: ${pr.registrationPrice} ${pr.registrationPrice?.currency}")
println("Renewal: ${pr.renewalPrice?.price} ${pr.renewalPrice?.currency}")
println("Transfer: ${pr.transferPrice?.price} ${pr.transferPrice?.currency}")
println("Restoration: ${pr.restorationPrice?.price} ${pr.restorationPrice?.currency}")
}
}
}
suspend fun listBillingRecords() {
val currentDate = Date()
val localDateTime = currentDate.toInstant().atZone(ZoneId.systemDefault()).toLocalDateTime()
val zoneOffset = ZoneOffset.of("+01:00")
val localDateTime2 = localDateTime.minusYears(1)
val myStartTime = localDateTime2.toInstant(zoneOffset)
val myEndTime = localDateTime.toInstant(zoneOffset)
val timeStart: Instant? = myStartTime?.let { Instant(it) }
val timeEnd: Instant? = myEndTime?.let { Instant(it) }
val viewBillingRequest =
ViewBillingRequest {
start = timeStart
end = timeEnd
}
Route53DomainsClient.fromEnvironment { region = "us-east-1" }.use { route53DomainsClient ->
route53DomainsClient
.viewBillingPaginated(viewBillingRequest)
.transform { it.billingRecords?.forEach { obj -> emit(obj) } }
.collect { billing ->
println("Bill Date: ${billing.billDate}")
println("Operation: ${billing.operation}")
println("Price: ${billing.price}")
}
}
}
suspend fun listOperations() {
val currentDate = Date()
var localDateTime = currentDate.toInstant().atZone(ZoneId.systemDefault()).toLocalDateTime()
val zoneOffset = ZoneOffset.of("+01:00")
localDateTime = localDateTime.minusYears(1)
val myTime: java.time.Instant? = localDateTime.toInstant(zoneOffset)
val time2: Instant? = myTime?.let { Instant(it) }
val operationsRequest =
ListOperationsRequest {
submittedSince = time2
}
Route53DomainsClient.fromEnvironment { region = "us-east-1" }.use { route53DomainsClient ->
route53DomainsClient
.listOperationsPaginated(operationsRequest)
.transform { it.operations?.forEach { obj -> emit(obj) } }
.collect { content ->
println("Operation Id: ${content.operationId}")
println("Status: ${content.status}")
println("Date: ${content.submittedDate}")
}
}
}
suspend fun listDomains() {
Route53DomainsClient.fromEnvironment { region = "us-east-1" }.use { route53DomainsClient ->
route53DomainsClient
.listDomainsPaginated(ListDomainsRequest {})
.transform { it.domains?.forEach { obj -> emit(obj) } }
.collect { content ->
println("The domain name is ${content.domainName}")
}
}
}
```
+ Lihat detail API di topik-topik berikut dalam *Referensi API AWS SDK For Kotlin*.
+ [CheckDomainAvailability](https://sdk.amazonaws.com/kotlin/api/latest/index.html)
+ [CheckDomainTransferability](https://sdk.amazonaws.com/kotlin/api/latest/index.html)
+ [GetDomainDetail](https://sdk.amazonaws.com/kotlin/api/latest/index.html)
+ [GetDomainSuggestions](https://sdk.amazonaws.com/kotlin/api/latest/index.html)
+ [GetOperationDetail](https://sdk.amazonaws.com/kotlin/api/latest/index.html)
+ [ListDomains](https://sdk.amazonaws.com/kotlin/api/latest/index.html)
+ [ListOperations](https://sdk.amazonaws.com/kotlin/api/latest/index.html)
+ [ListPrices](https://sdk.amazonaws.com/kotlin/api/latest/index.html)
+ [RegisterDomain](https://sdk.amazonaws.com/kotlin/api/latest/index.html)
+ [ViewBilling](https://sdk.amazonaws.com/kotlin/api/latest/index.html)
------
Untuk daftar lengkap panduan pengembang AWS SDK dan contoh kode, lihat[Menggunakan Route 53 dengan AWS SDK](sdk-general-information-section.md). Topik ini juga mencakup informasi tentang memulai dan detail tentang versi SDK sebelumnya.
# Tindakan untuk pendaftaran domain Route 53 menggunakan AWS SDKs
Contoh kode berikut menunjukkan cara melakukan tindakan pendaftaran domain Route 53 individual dengan AWS SDKs. Setiap contoh menyertakan tautan ke GitHub, di mana Anda dapat menemukan instruksi untuk mengatur dan menjalankan kode.
Contoh berikut hanya mencakup tindakan yang paling umum digunakan. Untuk daftar lengkapnya, lihat [Referensi Amazon Route 53 domain registration API](https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Domains.html).
**Topics**
+ [`CheckDomainAvailability`](route-53-domains_example_route-53-domains_CheckDomainAvailability_section.md)
+ [`CheckDomainTransferability`](route-53-domains_example_route-53-domains_CheckDomainTransferability_section.md)
+ [`GetDomainDetail`](route-53-domains_example_route-53-domains_GetDomainDetail_section.md)
+ [`GetDomainSuggestions`](route-53-domains_example_route-53-domains_GetDomainSuggestions_section.md)
+ [`GetOperationDetail`](route-53-domains_example_route-53-domains_GetOperationDetail_section.md)
+ [`ListDomains`](route-53-domains_example_route-53-domains_ListDomains_section.md)
+ [`ListOperations`](route-53-domains_example_route-53-domains_ListOperations_section.md)
+ [`ListPrices`](route-53-domains_example_route-53-domains_ListPrices_section.md)
+ [`RegisterDomain`](route-53-domains_example_route-53-domains_RegisterDomain_section.md)
+ [`ViewBilling`](route-53-domains_example_route-53-domains_ViewBilling_section.md)
# Gunakan `CheckDomainAvailability` dengan AWS SDK atau CLI
Contoh kode berikut menunjukkan cara menggunakan`CheckDomainAvailability`.
Contoh tindakan adalah kutipan kode dari program yang lebih besar dan harus dijalankan dalam konteks. Anda dapat melihat tindakan ini dalam konteks dalam contoh kode berikut:
+ [Pelajari dasar-dasarnya](route-53-domains_example_route-53-domains_Scenario_GetStartedRoute53Domains_section.md)
------
#### [ .NET ]
**SDK untuk .NET**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/dotnetv3/Route53#code-examples).
```
///
/// Check the availability of a domain name.
///
/// The domain to check for availability.
/// An availability result string.
public async Task CheckDomainAvailability(string domain)
{
var result = await _amazonRoute53Domains.CheckDomainAvailabilityAsync(
new CheckDomainAvailabilityRequest
{
DomainName = domain
}
);
return result.Availability.Value;
}
```
+ Untuk detail API, lihat [CheckDomainAvailability](https://docs.aws.amazon.com/goto/DotNetSDKV3/route53domains-2014-05-15/CheckDomainAvailability)di *Referensi AWS SDK untuk .NET API*.
------
#### [ CLI ]
**AWS CLI**
**Untuk menentukan apakah Anda dapat mendaftarkan nama domain dengan Route 53**
`check-domain-availability`Perintah berikut mengembalikan informasi tentang apakah nama `example.com` domain tersedia untuk didaftarkan menggunakan Route 53.
Perintah ini hanya berjalan di `us-east-1` Wilayah. Jika wilayah default Anda diatur ke`us-east-1`, Anda dapat menghilangkan `region` parameter.
```
aws route53domains check-domain-availability \
--region us-east-1 \
--domain-name example.com
```
Output:
```
{
"Availability": "UNAVAILABLE"
}
```
Route 53 mendukung sejumlah besar domain tingkat atas (TLDs), seperti `.com` dan`.jp`, tetapi kami tidak mendukung semua yang tersedia. TLDs Jika Anda memeriksa ketersediaan domain dan Route 53 tidak mendukung TLD, akan `check-domain-availability` menampilkan pesan berikut.
```
An error occurred (UnsupportedTLD) when calling the CheckDomainAvailability operation: tld is not supported.
```
Untuk daftar yang dapat Anda gunakan saat mendaftarkan domain dengan Route 53, lihat [Domain yang Dapat Anda Daftarkan dengan Amazon Route 53](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/registrar-tld-list.html) di *Panduan Pengembang Amazon Route 53*. TLDs Untuk informasi selengkapnya tentang mendaftarkan domain dengan Amazon Route 53, lihat [Mendaftarkan Domain Baru](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/domain-register.html) di *Panduan Pengembang Amazon Route 53*.
+ Untuk detail API, lihat [CheckDomainAvailability](https://awscli.amazonaws.com/v2/documentation/api/latest/reference/route53domains/check-domain-availability.html)di *Referensi AWS CLI Perintah*.
------
#### [ Java ]
**SDK untuk Java 2.x**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/javav2/example_code/route53#code-examples).
```
public static void checkDomainAvailability(Route53DomainsClient route53DomainsClient, String domainSuggestion) {
try {
CheckDomainAvailabilityRequest availabilityRequest = CheckDomainAvailabilityRequest.builder()
.domainName(domainSuggestion)
.build();
CheckDomainAvailabilityResponse response = route53DomainsClient
.checkDomainAvailability(availabilityRequest);
System.out.println(domainSuggestion + " is " + response.availability().toString());
} catch (Route53Exception e) {
System.err.println(e.getMessage());
System.exit(1);
}
}
```
+ Untuk detail API, lihat [CheckDomainAvailability](https://docs.aws.amazon.com/goto/SdkForJavaV2/route53domains-2014-05-15/CheckDomainAvailability)di *Referensi AWS SDK for Java 2.x API*.
------
#### [ Kotlin ]
**SDK untuk Kotlin**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/kotlin/services/route53#code-examples).
```
suspend fun checkDomainAvailability(domainSuggestion: String) {
val availabilityRequest =
CheckDomainAvailabilityRequest {
domainName = domainSuggestion
}
Route53DomainsClient.fromEnvironment { region = "us-east-1" }.use { route53DomainsClient ->
val response = route53DomainsClient.checkDomainAvailability(availabilityRequest)
println("$domainSuggestion is ${response.availability}")
}
}
```
+ Untuk detail API, lihat [CheckDomainAvailability](https://sdk.amazonaws.com/kotlin/api/latest/index.html)di *AWS SDK untuk referensi API Kotlin*.
------
Untuk daftar lengkap panduan pengembang AWS SDK dan contoh kode, lihat[Menggunakan Route 53 dengan AWS SDK](sdk-general-information-section.md). Topik ini juga mencakup informasi tentang memulai dan detail tentang versi SDK sebelumnya.
# Gunakan `CheckDomainTransferability` dengan AWS SDK atau CLI
Contoh kode berikut menunjukkan cara menggunakan`CheckDomainTransferability`.
Contoh tindakan adalah kutipan kode dari program yang lebih besar dan harus dijalankan dalam konteks. Anda dapat melihat tindakan ini dalam konteks dalam contoh kode berikut:
+ [Pelajari dasar-dasarnya](route-53-domains_example_route-53-domains_Scenario_GetStartedRoute53Domains_section.md)
------
#### [ .NET ]
**SDK untuk .NET**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/dotnetv3/Route53#code-examples).
```
///
/// Check the transferability of a domain name.
///
/// The domain to check for transferability.
/// A transferability result string.
public async Task CheckDomainTransferability(string domain)
{
var result = await _amazonRoute53Domains.CheckDomainTransferabilityAsync(
new CheckDomainTransferabilityRequest
{
DomainName = domain
}
);
return result.Transferability.Transferable.Value;
}
```
+ Untuk detail API, lihat [CheckDomainTransferability](https://docs.aws.amazon.com/goto/DotNetSDKV3/route53domains-2014-05-15/CheckDomainTransferability)di *Referensi AWS SDK untuk .NET API*.
------
#### [ CLI ]
**AWS CLI**
**Untuk menentukan apakah domain dapat ditransfer ke Route 53**
`check-domain-transferability`Perintah berikut mengembalikan informasi tentang apakah Anda dapat mentransfer nama domain `example.com` ke Route 53.
Perintah ini hanya berjalan di `us-east-1` Wilayah. Jika wilayah default Anda diatur ke`us-east-1`, Anda dapat menghilangkan `region` parameter.
```
aws route53domains check-domain-transferability \
--region us-east-1 \
--domain-name example.com
```
Output:
```
{
"Transferability": {
"Transferable": "UNTRANSFERABLE"
}
}
```
Untuk informasi selengkapnya, lihat [Mentransfer Pendaftaran Domain ke Amazon Route 53](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/domain-transfer-to-route-53.html) di *Panduan Pengembang Amazon Route 53*.
+ Untuk detail API, lihat [CheckDomainTransferability](https://awscli.amazonaws.com/v2/documentation/api/latest/reference/route53domains/check-domain-transferability.html)di *Referensi AWS CLI Perintah*.
------
#### [ Java ]
**SDK untuk Java 2.x**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/javav2/example_code/route53#code-examples).
```
public static void checkDomainTransferability(Route53DomainsClient route53DomainsClient, String domainSuggestion) {
try {
CheckDomainTransferabilityRequest transferabilityRequest = CheckDomainTransferabilityRequest.builder()
.domainName(domainSuggestion)
.build();
CheckDomainTransferabilityResponse response = route53DomainsClient
.checkDomainTransferability(transferabilityRequest);
System.out.println("Transferability: " + response.transferability().transferable().toString());
} catch (Route53Exception e) {
System.err.println(e.getMessage());
System.exit(1);
}
}
```
+ Untuk detail API, lihat [CheckDomainTransferability](https://docs.aws.amazon.com/goto/SdkForJavaV2/route53domains-2014-05-15/CheckDomainTransferability)di *Referensi AWS SDK for Java 2.x API*.
------
#### [ Kotlin ]
**SDK untuk Kotlin**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/kotlin/services/route53#code-examples).
```
suspend fun checkDomainTransferability(domainSuggestion: String?) {
val transferabilityRequest =
CheckDomainTransferabilityRequest {
domainName = domainSuggestion
}
Route53DomainsClient.fromEnvironment { region = "us-east-1" }.use { route53DomainsClient ->
val response = route53DomainsClient.checkDomainTransferability(transferabilityRequest)
println("Transferability: ${response.transferability?.transferable}")
}
}
```
+ Untuk detail API, lihat [CheckDomainTransferability](https://sdk.amazonaws.com/kotlin/api/latest/index.html)di *AWS SDK untuk referensi API Kotlin*.
------
Untuk daftar lengkap panduan pengembang AWS SDK dan contoh kode, lihat[Menggunakan Route 53 dengan AWS SDK](sdk-general-information-section.md). Topik ini juga mencakup informasi tentang memulai dan detail tentang versi SDK sebelumnya.
# Gunakan `GetDomainDetail` dengan AWS SDK atau CLI
Contoh kode berikut menunjukkan cara menggunakan`GetDomainDetail`.
Contoh tindakan adalah kutipan kode dari program yang lebih besar dan harus dijalankan dalam konteks. Anda dapat melihat tindakan ini dalam konteks dalam contoh kode berikut:
+ [Pelajari dasar-dasarnya](route-53-domains_example_route-53-domains_Scenario_GetStartedRoute53Domains_section.md)
------
#### [ .NET ]
**SDK untuk .NET**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/dotnetv3/Route53#code-examples).
```
///
/// Get details for a domain.
///
/// A string with detail information about the domain.
public async Task GetDomainDetail(string domainName)
{
try
{
var result = await _amazonRoute53Domains.GetDomainDetailAsync(
new GetDomainDetailRequest()
{
DomainName = domainName
});
var details = $"\tDomain {domainName}:\n" +
$"\tCreated on {result.CreationDate.ToShortDateString()}.\n" +
$"\tAdmin contact is {result.AdminContact.Email}.\n" +
$"\tAuto-renew is {result.AutoRenew}.\n";
return details;
}
catch (InvalidInputException)
{
return $"Domain {domainName} was not found in your account.";
}
}
```
+ Untuk detail API, lihat [GetDomainDetail](https://docs.aws.amazon.com/goto/DotNetSDKV3/route53domains-2014-05-15/GetDomainDetail)di *Referensi AWS SDK untuk .NET API*.
------
#### [ CLI ]
**AWS CLI**
**Untuk mendapatkan informasi rinci tentang domain tertentu**
`get-domain-detail`Perintah berikut menampilkan informasi rinci tentang domain yang ditentukan.
Perintah ini hanya berjalan di `us-east-1` Wilayah. Jika wilayah default Anda diatur ke`us-east-1`, Anda dapat menghilangkan `region` parameter.
```
aws route53domains get-domain-detail \
--region us-east-1 \
--domain-name example.com
```
Output:
```
{
"DomainName": "example.com",
"Nameservers": [
{
"Name": "ns-2048.awsdns-64.com",
"GlueIps": []
},
{
"Name": "ns-2049.awsdns-65.net",
"GlueIps": []
},
{
"Name": "ns-2050.awsdns-66.org",
"GlueIps": []
},
{
"Name": "ns-2051.awsdns-67.co.uk",
"GlueIps": []
}
],
"AutoRenew": true,
"AdminContact": {
"FirstName": "Saanvi",
"LastName": "Sarkar",
"ContactType": "COMPANY",
"OrganizationName": "Example",
"AddressLine1": "123 Main Street",
"City": "Anytown",
"State": "WA",
"CountryCode": "US",
"ZipCode": "98101",
"PhoneNumber": "+1.8005551212",
"Email": "ssarkar@example.com",
"ExtraParams": []
},
"RegistrantContact": {
"FirstName": "Alejandro",
"LastName": "Rosalez",
"ContactType": "COMPANY",
"OrganizationName": "Example",
"AddressLine1": "123 Main Street",
"City": "Anytown",
"State": "WA",
"CountryCode": "US",
"ZipCode": "98101",
"PhoneNumber": "+1.8005551212",
"Email": "arosalez@example.com",
"ExtraParams": []
},
"TechContact": {
"FirstName": "Wang",
"LastName": "Xiulan",
"ContactType": "COMPANY",
"OrganizationName": "Example",
"AddressLine1": "123 Main Street",
"City": "Anytown",
"State": "WA",
"CountryCode": "US",
"ZipCode": "98101",
"PhoneNumber": "+1.8005551212",
"Email": "wxiulan@example.com",
"ExtraParams": []
},
"AdminPrivacy": true,
"RegistrantPrivacy": true,
"TechPrivacy": true,
"RegistrarName": "Amazon Registrar, Inc.",
"WhoIsServer": "whois.registrar.amazon",
"RegistrarUrl": "http://registrar.amazon.com",
"AbuseContactEmail": "abuse@registrar.amazon.com",
"AbuseContactPhone": "+1.2062661000",
"CreationDate": 1444934889.601,
"ExpirationDate": 1602787689.0,
"StatusList": [
"clientTransferProhibited"
]
}
```
+ Untuk detail API, lihat [GetDomainDetail](https://awscli.amazonaws.com/v2/documentation/api/latest/reference/route53domains/get-domain-detail.html)di *Referensi AWS CLI Perintah*.
------
#### [ Java ]
**SDK untuk Java 2.x**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/javav2/example_code/route53#code-examples).
```
public static void getDomainDetails(Route53DomainsClient route53DomainsClient, String domainSuggestion) {
try {
GetDomainDetailRequest detailRequest = GetDomainDetailRequest.builder()
.domainName(domainSuggestion)
.build();
GetDomainDetailResponse response = route53DomainsClient.getDomainDetail(detailRequest);
System.out.println("The contact first name is " + response.registrantContact().firstName());
System.out.println("The contact last name is " + response.registrantContact().lastName());
System.out.println("The contact org name is " + response.registrantContact().organizationName());
} catch (Route53Exception e) {
System.err.println(e.getMessage());
System.exit(1);
}
}
```
+ Untuk detail API, lihat [GetDomainDetail](https://docs.aws.amazon.com/goto/SdkForJavaV2/route53domains-2014-05-15/GetDomainDetail)di *Referensi AWS SDK for Java 2.x API*.
------
#### [ Kotlin ]
**SDK untuk Kotlin**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/kotlin/services/route53#code-examples).
```
suspend fun getDomainDetails(domainSuggestion: String?) {
val detailRequest =
GetDomainDetailRequest {
domainName = domainSuggestion
}
Route53DomainsClient.fromEnvironment { region = "us-east-1" }.use { route53DomainsClient ->
val response = route53DomainsClient.getDomainDetail(detailRequest)
println("The contact first name is ${response.registrantContact?.firstName}")
println("The contact last name is ${response.registrantContact?.lastName}")
println("The contact org name is ${response.registrantContact?.organizationName}")
}
}
```
+ Untuk detail API, lihat [GetDomainDetail](https://sdk.amazonaws.com/kotlin/api/latest/index.html)di *AWS SDK untuk referensi API Kotlin*.
------
Untuk daftar lengkap panduan pengembang AWS SDK dan contoh kode, lihat[Menggunakan Route 53 dengan AWS SDK](sdk-general-information-section.md). Topik ini juga mencakup informasi tentang memulai dan detail tentang versi SDK sebelumnya.
# Gunakan `GetDomainSuggestions` dengan AWS SDK atau CLI
Contoh kode berikut menunjukkan cara menggunakan`GetDomainSuggestions`.
Contoh tindakan adalah kutipan kode dari program yang lebih besar dan harus dijalankan dalam konteks. Anda dapat melihat tindakan ini dalam konteks dalam contoh kode berikut:
+ [Pelajari dasar-dasarnya](route-53-domains_example_route-53-domains_Scenario_GetStartedRoute53Domains_section.md)
------
#### [ .NET ]
**SDK untuk .NET**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/dotnetv3/Route53#code-examples).
```
///
/// Get a list of suggestions for a given domain.
///
/// The domain to check for suggestions.
/// If true, only returns available domains.
/// The number of suggestions to return. Defaults to the max of 50.
/// A collection of domain suggestions.
public async Task> GetDomainSuggestions(string domain, bool onlyAvailable, int suggestionCount = 50)
{
var result = await _amazonRoute53Domains.GetDomainSuggestionsAsync(
new GetDomainSuggestionsRequest
{
DomainName = domain,
OnlyAvailable = onlyAvailable,
SuggestionCount = suggestionCount
}
);
return result.SuggestionsList;
}
```
+ Untuk detail API, lihat [GetDomainSuggestions](https://docs.aws.amazon.com/goto/DotNetSDKV3/route53domains-2014-05-15/GetDomainSuggestions)di *Referensi AWS SDK untuk .NET API*.
------
#### [ CLI ]
**AWS CLI**
**Untuk mendapatkan daftar nama domain yang disarankan**
`get-domain-suggestions`Perintah berikut menampilkan daftar nama domain yang disarankan berdasarkan nama domain`example.com`. Responsnya hanya mencakup nama domain yang tersedia. Perintah ini hanya berjalan di `us-east-1` Wilayah. Jika wilayah default Anda diatur ke`us-east-1`, Anda dapat menghilangkan `region` parameter.
```
aws route53domains get-domain-suggestions \
--region us-east-1 \
--domain-name example.com \
--suggestion-count 10 \
--only-available
```
Output:
```
{
"SuggestionsList": [
{
"DomainName": "egzaampal.com",
"Availability": "AVAILABLE"
},
{
"DomainName": "examplelaw.com",
"Availability": "AVAILABLE"
},
{
"DomainName": "examplehouse.net",
"Availability": "AVAILABLE"
},
{
"DomainName": "homeexample.net",
"Availability": "AVAILABLE"
},
{
"DomainName": "examplelist.com",
"Availability": "AVAILABLE"
},
{
"DomainName": "examplenews.net",
"Availability": "AVAILABLE"
},
{
"DomainName": "officeexample.com",
"Availability": "AVAILABLE"
},
{
"DomainName": "exampleworld.com",
"Availability": "AVAILABLE"
},
{
"DomainName": "exampleart.com",
"Availability": "AVAILABLE"
}
]
}
```
+ Untuk detail API, lihat [GetDomainSuggestions](https://awscli.amazonaws.com/v2/documentation/api/latest/reference/route53domains/get-domain-suggestions.html)di *Referensi AWS CLI Perintah*.
------
#### [ Java ]
**SDK untuk Java 2.x**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/javav2/example_code/route53#code-examples).
```
public static void listDomainSuggestions(Route53DomainsClient route53DomainsClient, String domainSuggestion) {
try {
GetDomainSuggestionsRequest suggestionsRequest = GetDomainSuggestionsRequest.builder()
.domainName(domainSuggestion)
.suggestionCount(5)
.onlyAvailable(true)
.build();
GetDomainSuggestionsResponse response = route53DomainsClient.getDomainSuggestions(suggestionsRequest);
List suggestions = response.suggestionsList();
for (DomainSuggestion suggestion : suggestions) {
System.out.println("Suggestion Name: " + suggestion.domainName());
System.out.println("Availability: " + suggestion.availability());
System.out.println(" ");
}
} catch (Route53Exception e) {
System.err.println(e.getMessage());
System.exit(1);
}
}
```
+ Untuk detail API, lihat [GetDomainSuggestions](https://docs.aws.amazon.com/goto/SdkForJavaV2/route53domains-2014-05-15/GetDomainSuggestions)di *Referensi AWS SDK for Java 2.x API*.
------
#### [ Kotlin ]
**SDK untuk Kotlin**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/kotlin/services/route53#code-examples).
```
suspend fun listDomainSuggestions(domainSuggestion: String?) {
val suggestionsRequest =
GetDomainSuggestionsRequest {
domainName = domainSuggestion
suggestionCount = 5
onlyAvailable = true
}
Route53DomainsClient.fromEnvironment { region = "us-east-1" }.use { route53DomainsClient ->
val response = route53DomainsClient.getDomainSuggestions(suggestionsRequest)
response.suggestionsList?.forEach { suggestion ->
println("Suggestion Name: ${suggestion.domainName}")
println("Availability: ${suggestion.availability}")
println(" ")
}
}
}
```
+ Untuk detail API, lihat [GetDomainSuggestions](https://sdk.amazonaws.com/kotlin/api/latest/index.html)di *AWS SDK untuk referensi API Kotlin*.
------
Untuk daftar lengkap panduan pengembang AWS SDK dan contoh kode, lihat[Menggunakan Route 53 dengan AWS SDK](sdk-general-information-section.md). Topik ini juga mencakup informasi tentang memulai dan detail tentang versi SDK sebelumnya.
# Gunakan `GetOperationDetail` dengan AWS SDK atau CLI
Contoh kode berikut menunjukkan cara menggunakan`GetOperationDetail`.
Contoh tindakan adalah kutipan kode dari program yang lebih besar dan harus dijalankan dalam konteks. Anda dapat melihat tindakan ini dalam konteks dalam contoh kode berikut:
+ [Pelajari dasar-dasarnya](route-53-domains_example_route-53-domains_Scenario_GetStartedRoute53Domains_section.md)
------
#### [ .NET ]
**SDK untuk .NET**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/dotnetv3/Route53#code-examples).
```
///
/// Get details for a domain action operation.
///
/// The operational Id.
/// A string describing the operational details.
public async Task GetOperationDetail(string? operationId)
{
if (operationId == null)
return "Unable to get operational details because ID is null.";
try
{
var operationDetails =
await _amazonRoute53Domains.GetOperationDetailAsync(
new GetOperationDetailRequest
{
OperationId = operationId
}
);
var details = $"\tOperation {operationId}:\n" +
$"\tFor domain {operationDetails.DomainName} on {operationDetails.SubmittedDate.ToShortDateString()}.\n" +
$"\tMessage is {operationDetails.Message}.\n" +
$"\tStatus is {operationDetails.Status}.\n";
return details;
}
catch (AmazonRoute53DomainsException ex)
{
return $"Unable to get operation details. Here's why: {ex.Message}.";
}
}
```
+ Untuk detail API, lihat [GetOperationDetail](https://docs.aws.amazon.com/goto/DotNetSDKV3/route53domains-2014-05-15/GetOperationDetail)di *Referensi AWS SDK untuk .NET API*.
------
#### [ CLI ]
**AWS CLI**
**Untuk mendapatkan status operasi saat ini**
Beberapa operasi pendaftaran domain beroperasi secara asinkron dan mengembalikan respons sebelum selesai. Operasi ini mengembalikan ID operasi yang dapat Anda gunakan untuk mendapatkan status saat ini. `get-operation-detail`Perintah berikut mengembalikan status operasi yang ditentukan.
Perintah ini hanya berjalan di `us-east-1` Wilayah. Jika wilayah default Anda diatur ke`us-east-1`, Anda dapat menghilangkan `region` parameter.
```
aws route53domains get-operation-detail \
--region us-east-1 \
--operation-id edbd8d63-7fe7-4343-9bc5-54033example
```
Output:
```
{
"OperationId": "edbd8d63-7fe7-4343-9bc5-54033example",
"Status": "SUCCESSFUL",
"DomainName": "example.com",
"Type": "DOMAIN_LOCK",
"SubmittedDate": 1573749367.864
}
```
+ Untuk detail API, lihat [GetOperationDetail](https://awscli.amazonaws.com/v2/documentation/api/latest/reference/route53domains/get-operation-detail.html)di *Referensi AWS CLI Perintah*.
------
#### [ Java ]
**SDK untuk Java 2.x**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/javav2/example_code/route53#code-examples).
```
public static void getOperationalDetail(Route53DomainsClient route53DomainsClient, String operationId) {
try {
GetOperationDetailRequest detailRequest = GetOperationDetailRequest.builder()
.operationId(operationId)
.build();
GetOperationDetailResponse response = route53DomainsClient.getOperationDetail(detailRequest);
System.out.println("Operation detail message is " + response.message());
} catch (Route53Exception e) {
System.err.println(e.getMessage());
System.exit(1);
}
}
```
+ Untuk detail API, lihat [GetOperationDetail](https://docs.aws.amazon.com/goto/SdkForJavaV2/route53domains-2014-05-15/GetOperationDetail)di *Referensi AWS SDK for Java 2.x API*.
------
#### [ Kotlin ]
**SDK untuk Kotlin**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/kotlin/services/route53#code-examples).
```
suspend fun getOperationalDetail(opId: String?) {
val detailRequest =
GetOperationDetailRequest {
operationId = opId
}
Route53DomainsClient.fromEnvironment { region = "us-east-1" }.use { route53DomainsClient ->
val response = route53DomainsClient.getOperationDetail(detailRequest)
println("Operation detail message is ${response.message}")
}
}
```
+ Untuk detail API, lihat [GetOperationDetail](https://sdk.amazonaws.com/kotlin/api/latest/index.html)di *AWS SDK untuk referensi API Kotlin*.
------
Untuk daftar lengkap panduan pengembang AWS SDK dan contoh kode, lihat[Menggunakan Route 53 dengan AWS SDK](sdk-general-information-section.md). Topik ini juga mencakup informasi tentang memulai dan detail tentang versi SDK sebelumnya.
# Gunakan `ListDomains` dengan AWS SDK atau CLI
Contoh kode berikut menunjukkan cara menggunakan`ListDomains`.
Contoh tindakan adalah kutipan kode dari program yang lebih besar dan harus dijalankan dalam konteks. Anda dapat melihat tindakan ini dalam konteks dalam contoh kode berikut:
+ [Pelajari dasar-dasarnya](route-53-domains_example_route-53-domains_Scenario_GetStartedRoute53Domains_section.md)
------
#### [ .NET ]
**SDK untuk .NET**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/dotnetv3/Route53#code-examples).
```
///
/// List the domains for the account.
///
/// A collection of domain summary records.
public async Task> ListDomains()
{
var results = new List();
var paginateDomains = _amazonRoute53Domains.Paginators.ListDomains(
new ListDomainsRequest());
// Get the entire list using the paginator.
await foreach (var domain in paginateDomains.Domains)
{
results.Add(domain);
}
return results;
}
```
+ Untuk detail API, lihat [ListDomains](https://docs.aws.amazon.com/goto/DotNetSDKV3/route53domains-2014-05-15/ListDomains)di *Referensi AWS SDK untuk .NET API*.
------
#### [ CLI ]
**AWS CLI**
**Untuk membuat daftar domain yang terdaftar dengan akun saat ini AWS **
`list-domains`Perintah berikut mencantumkan informasi ringkasan tentang domain yang terdaftar dengan AWS akun saat ini.
Perintah ini hanya berjalan di `us-east-1` Wilayah. Jika wilayah default Anda diatur ke`us-east-1`, Anda dapat menghilangkan `region` parameter.
```
aws route53domains list-domains
--region us-east-1
```
Output:
```
{
"Domains": [
{
"DomainName": "example.com",
"AutoRenew": true,
"TransferLock": true,
"Expiry": 1602712345.0
},
{
"DomainName": "example.net",
"AutoRenew": true,
"TransferLock": true,
"Expiry": 1602723456.0
},
{
"DomainName": "example.org",
"AutoRenew": true,
"TransferLock": true,
"Expiry": 1602734567.0
}
]
}
```
+ Untuk detail API, lihat [ListDomains](https://awscli.amazonaws.com/v2/documentation/api/latest/reference/route53domains/list-domains.html)di *Referensi AWS CLI Perintah*.
------
#### [ Java ]
**SDK untuk Java 2.x**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/javav2/example_code/route53#code-examples).
```
public static void listDomains(Route53DomainsClient route53DomainsClient) {
try {
ListDomainsIterable listRes = route53DomainsClient.listDomainsPaginator();
listRes.stream()
.flatMap(r -> r.domains().stream())
.forEach(content -> System.out.println("The domain name is " + content.domainName()));
} catch (Route53Exception e) {
System.err.println(e.getMessage());
System.exit(1);
}
}
```
+ Untuk detail API, lihat [ListDomains](https://docs.aws.amazon.com/goto/SdkForJavaV2/route53domains-2014-05-15/ListDomains)di *Referensi AWS SDK for Java 2.x API*.
------
#### [ Kotlin ]
**SDK untuk Kotlin**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/kotlin/services/route53#code-examples).
```
suspend fun listDomains() {
Route53DomainsClient.fromEnvironment { region = "us-east-1" }.use { route53DomainsClient ->
route53DomainsClient
.listDomainsPaginated(ListDomainsRequest {})
.transform { it.domains?.forEach { obj -> emit(obj) } }
.collect { content ->
println("The domain name is ${content.domainName}")
}
}
}
```
+ Untuk detail API, lihat [ListDomains](https://sdk.amazonaws.com/kotlin/api/latest/index.html)di *AWS SDK untuk referensi API Kotlin*.
------
Untuk daftar lengkap panduan pengembang AWS SDK dan contoh kode, lihat[Menggunakan Route 53 dengan AWS SDK](sdk-general-information-section.md). Topik ini juga mencakup informasi tentang memulai dan detail tentang versi SDK sebelumnya.
# Gunakan `ListOperations` dengan AWS SDK atau CLI
Contoh kode berikut menunjukkan cara menggunakan`ListOperations`.
Contoh tindakan adalah kutipan kode dari program yang lebih besar dan harus dijalankan dalam konteks. Anda dapat melihat tindakan ini dalam konteks dalam contoh kode berikut:
+ [Pelajari dasar-dasarnya](route-53-domains_example_route-53-domains_Scenario_GetStartedRoute53Domains_section.md)
------
#### [ .NET ]
**SDK untuk .NET**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/dotnetv3/Route53#code-examples).
```
///
/// List operations for the account that are submitted after a specified date.
///
/// A collection of operation summary records.
public async Task> ListOperations(DateTime submittedSince)
{
var results = new List();
var paginateOperations = _amazonRoute53Domains.Paginators.ListOperations(
new ListOperationsRequest()
{
SubmittedSince = submittedSince
});
// Get the entire list using the paginator.
await foreach (var operations in paginateOperations.Operations)
{
results.Add(operations);
}
return results;
}
```
+ Untuk detail API, lihat [ListOperations](https://docs.aws.amazon.com/goto/DotNetSDKV3/route53domains-2014-05-15/ListOperations)di *Referensi AWS SDK untuk .NET API*.
------
#### [ CLI ]
**AWS CLI**
**Untuk mencantumkan status operasi yang mengembalikan ID operasi**
Beberapa operasi pendaftaran domain berjalan secara asinkron dan mengembalikan respons sebelum selesai. Operasi ini mengembalikan ID operasi yang dapat Anda gunakan untuk mendapatkan status saat ini. `list-operations`Perintah berikut mencantumkan informasi ringkasan, termasuk status, tentang operasi registrasi domain saat ini.
Perintah ini hanya berjalan di `us-east-1` Wilayah. Jika wilayah default Anda diatur ke`us-east-1`, Anda dapat menghilangkan `region` parameter.
```
aws route53domains list-operations
--region us-east-1
```
Output:
```
{
"Operations": [
{
"OperationId": "aab9822f-1da0-4bf3-8a15-fd4e0example",
"Status": "SUCCESSFUL",
"Type": "DOMAIN_LOCK",
"SubmittedDate": 1455321739.986
},
{
"OperationId": "c24379ed-76be-42f8-bdad-9379bexample",
"Status": "SUCCESSFUL",
"Type": "UPDATE_NAMESERVER",
"SubmittedDate": 1468960475.109
},
{
"OperationId": "f47e1297-ef9e-4c2b-ae1e-a5fcbexample",
"Status": "SUCCESSFUL",
"Type": "RENEW_DOMAIN",
"SubmittedDate": 1473561835.943
},
{
"OperationId": "75584f23-b15f-459e-aed7-dc6f5example",
"Status": "SUCCESSFUL",
"Type": "UPDATE_DOMAIN_CONTACT",
"SubmittedDate": 1547501003.41
}
]
}
```
Outputnya mencakup semua operasi yang mengembalikan ID operasi dan yang telah Anda lakukan di semua domain yang pernah Anda daftarkan menggunakan AWS akun saat ini. Jika Anda hanya ingin mendapatkan operasi yang Anda kirimkan setelah tanggal yang ditentukan, Anda dapat menyertakan `submitted-since` parameter dan menentukan tanggal dalam format Unix dan Waktu Universal Terkoordinasi (UTC). Perintah berikut mendapatkan status semua operasi yang diajukan setelah pukul 12:00 UTC pada 1 Januari 2020.
```
aws route53domains list-operations \
--submitted-since 1577836800
```
+ Untuk detail API, lihat [ListOperations](https://awscli.amazonaws.com/v2/documentation/api/latest/reference/route53domains/list-operations.html)di *Referensi AWS CLI Perintah*.
------
#### [ Java ]
**SDK untuk Java 2.x**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/javav2/example_code/route53#code-examples).
```
public static void listOperations(Route53DomainsClient route53DomainsClient) {
try {
Date currentDate = new Date();
LocalDateTime localDateTime = currentDate.toInstant().atZone(ZoneId.systemDefault()).toLocalDateTime();
ZoneOffset zoneOffset = ZoneOffset.of("+01:00");
localDateTime = localDateTime.minusYears(1);
Instant myTime = localDateTime.toInstant(zoneOffset);
ListOperationsRequest operationsRequest = ListOperationsRequest.builder()
.submittedSince(myTime)
.build();
ListOperationsIterable listRes = route53DomainsClient.listOperationsPaginator(operationsRequest);
listRes.stream()
.flatMap(r -> r.operations().stream())
.forEach(content -> System.out.println(" Operation Id: " + content.operationId() +
" Status: " + content.statusAsString() +
" Date: " + content.submittedDate()));
} catch (Route53Exception e) {
System.err.println(e.getMessage());
System.exit(1);
}
}
```
+ Untuk detail API, lihat [ListOperations](https://docs.aws.amazon.com/goto/SdkForJavaV2/route53domains-2014-05-15/ListOperations)di *Referensi AWS SDK for Java 2.x API*.
------
#### [ Kotlin ]
**SDK untuk Kotlin**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/kotlin/services/route53#code-examples).
```
suspend fun listOperations() {
val currentDate = Date()
var localDateTime = currentDate.toInstant().atZone(ZoneId.systemDefault()).toLocalDateTime()
val zoneOffset = ZoneOffset.of("+01:00")
localDateTime = localDateTime.minusYears(1)
val myTime: java.time.Instant? = localDateTime.toInstant(zoneOffset)
val time2: Instant? = myTime?.let { Instant(it) }
val operationsRequest =
ListOperationsRequest {
submittedSince = time2
}
Route53DomainsClient.fromEnvironment { region = "us-east-1" }.use { route53DomainsClient ->
route53DomainsClient
.listOperationsPaginated(operationsRequest)
.transform { it.operations?.forEach { obj -> emit(obj) } }
.collect { content ->
println("Operation Id: ${content.operationId}")
println("Status: ${content.status}")
println("Date: ${content.submittedDate}")
}
}
}
```
+ Untuk detail API, lihat [ListOperations](https://sdk.amazonaws.com/kotlin/api/latest/index.html)di *AWS SDK untuk referensi API Kotlin*.
------
Untuk daftar lengkap panduan pengembang AWS SDK dan contoh kode, lihat[Menggunakan Route 53 dengan AWS SDK](sdk-general-information-section.md). Topik ini juga mencakup informasi tentang memulai dan detail tentang versi SDK sebelumnya.
# Gunakan `ListPrices` dengan AWS SDK
Contoh kode berikut menunjukkan cara menggunakan`ListPrices`.
Contoh tindakan adalah kutipan kode dari program yang lebih besar dan harus dijalankan dalam konteks. Anda dapat melihat tindakan ini dalam konteks dalam contoh kode berikut:
+ [Pelajari dasar-dasarnya](route-53-domains_example_route-53-domains_Scenario_GetStartedRoute53Domains_section.md)
------
#### [ .NET ]
**SDK untuk .NET**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/dotnetv3/Route53#code-examples).
```
///
/// List prices for domain type operations.
///
/// Domain types to include in the results.
/// The list of domain prices.
public async Task> ListPrices(List domainTypes)
{
var results = new List();
var paginatePrices = _amazonRoute53Domains.Paginators.ListPrices(new ListPricesRequest());
// Get the entire list using the paginator.
await foreach (var prices in paginatePrices.Prices)
{
results.Add(prices);
}
return results.Where(p => domainTypes.Contains(p.Name)).ToList();
}
```
+ Untuk detail API, lihat [ListPrices](https://docs.aws.amazon.com/goto/DotNetSDKV3/route53domains-2014-05-15/ListPrices)di *Referensi AWS SDK untuk .NET API*.
------
#### [ Java ]
**SDK untuk Java 2.x**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/javav2/example_code/route53#code-examples).
```
public static void listPrices(Route53DomainsClient route53DomainsClient, String domainType) {
try {
ListPricesRequest pricesRequest = ListPricesRequest.builder()
.tld(domainType)
.build();
ListPricesIterable listRes = route53DomainsClient.listPricesPaginator(pricesRequest);
listRes.stream()
.flatMap(r -> r.prices().stream())
.forEach(content -> System.out.println(" Name: " + content.name() +
" Registration: " + content.registrationPrice().price() + " "
+ content.registrationPrice().currency() +
" Renewal: " + content.renewalPrice().price() + " " + content.renewalPrice().currency()));
} catch (Route53Exception e) {
System.err.println(e.getMessage());
System.exit(1);
}
}
```
+ Untuk detail API, lihat [ListPrices](https://docs.aws.amazon.com/goto/SdkForJavaV2/route53domains-2014-05-15/ListPrices)di *Referensi AWS SDK for Java 2.x API*.
------
#### [ Kotlin ]
**SDK untuk Kotlin**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/kotlin/services/route53#code-examples).
```
suspend fun listAllPrices(domainType: String?) {
val pricesRequest =
ListPricesRequest {
tld = domainType
}
Route53DomainsClient.fromEnvironment { region = "us-east-1" }.use { route53DomainsClient ->
route53DomainsClient
.listPricesPaginated(pricesRequest)
.transform { it.prices?.forEach { obj -> emit(obj) } }
.collect { pr ->
println("Registration: ${pr.registrationPrice} ${pr.registrationPrice?.currency}")
println("Renewal: ${pr.renewalPrice?.price} ${pr.renewalPrice?.currency}")
println("Transfer: ${pr.transferPrice?.price} ${pr.transferPrice?.currency}")
println("Restoration: ${pr.restorationPrice?.price} ${pr.restorationPrice?.currency}")
}
}
}
```
+ Untuk detail API, lihat [ListPrices](https://sdk.amazonaws.com/kotlin/api/latest/index.html)di *AWS SDK untuk referensi API Kotlin*.
------
Untuk daftar lengkap panduan pengembang AWS SDK dan contoh kode, lihat[Menggunakan Route 53 dengan AWS SDK](sdk-general-information-section.md). Topik ini juga mencakup informasi tentang memulai dan detail tentang versi SDK sebelumnya.
# Gunakan `RegisterDomain` dengan AWS SDK atau CLI
Contoh kode berikut menunjukkan cara menggunakan`RegisterDomain`.
Contoh tindakan adalah kutipan kode dari program yang lebih besar dan harus dijalankan dalam konteks. Anda dapat melihat tindakan ini dalam konteks dalam contoh kode berikut:
+ [Pelajari dasar-dasarnya](route-53-domains_example_route-53-domains_Scenario_GetStartedRoute53Domains_section.md)
------
#### [ .NET ]
**SDK untuk .NET**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/dotnetv3/Route53#code-examples).
```
///
/// Initiate a domain registration request.
///
/// Contact details.
/// The domain name to register.
/// True if the domain should automatically renew.
/// The duration in years for the domain registration.
/// The operation Id.
public async Task RegisterDomain(string domainName, bool autoRenew, int duration, ContactDetail contact)
{
// This example uses the same contact information for admin, registrant, and tech contacts.
try
{
var result = await _amazonRoute53Domains.RegisterDomainAsync(
new RegisterDomainRequest()
{
AdminContact = contact,
RegistrantContact = contact,
TechContact = contact,
DomainName = domainName,
AutoRenew = autoRenew,
DurationInYears = duration,
PrivacyProtectAdminContact = false,
PrivacyProtectRegistrantContact = false,
PrivacyProtectTechContact = false
}
);
return result.OperationId;
}
catch (InvalidInputException)
{
_logger.LogInformation($"Unable to request registration for domain {domainName}");
return null;
}
}
```
+ Untuk detail API, lihat [RegisterDomain](https://docs.aws.amazon.com/goto/DotNetSDKV3/route53domains-2014-05-15/RegisterDomain)di *Referensi AWS SDK untuk .NET API*.
------
#### [ CLI ]
**AWS CLI**
**Untuk mendaftarkan domain**
`register-domain`Perintah berikut mendaftarkan domain, mengambil semua nilai parameter dari file berformat JSON.
Perintah ini hanya berjalan di `us-east-1` Wilayah. Jika wilayah default Anda diatur ke`us-east-1`, Anda dapat menghilangkan `region` parameter.
```
aws route53domains register-domain \
--region us-east-1 \
--cli-input-json file://register-domain.json
```
Isi dari `register-domain.json`:
```
{
"DomainName": "example.com",
"DurationInYears": 1,
"AutoRenew": true,
"AdminContact": {
"FirstName": "Martha",
"LastName": "Rivera",
"ContactType": "PERSON",
"OrganizationName": "Example",
"AddressLine1": "1 Main Street",
"City": "Anytown",
"State": "WA",
"CountryCode": "US",
"ZipCode": "98101",
"PhoneNumber": "+1.8005551212",
"Email": "mrivera@example.com"
},
"RegistrantContact": {
"FirstName": "Li",
"LastName": "Juan",
"ContactType": "PERSON",
"OrganizationName": "Example",
"AddressLine1": "1 Main Street",
"City": "Anytown",
"State": "WA",
"CountryCode": "US",
"ZipCode": "98101",
"PhoneNumber": "+1.8005551212",
"Email": "ljuan@example.com"
},
"TechContact": {
"FirstName": "Mateo",
"LastName": "Jackson",
"ContactType": "PERSON",
"OrganizationName": "Example",
"AddressLine1": "1 Main Street",
"City": "Anytown",
"State": "WA",
"CountryCode": "US",
"ZipCode": "98101",
"PhoneNumber": "+1.8005551212",
"Email": "mjackson@example.com"
},
"PrivacyProtectAdminContact": true,
"PrivacyProtectRegistrantContact": true,
"PrivacyProtectTechContact": true
}
```
Output:
```
{
"OperationId": "b114c44a-9330-47d1-a6e8-a0b11example"
}
```
Untuk mengonfirmasi bahwa operasi berhasil, Anda dapat menjalankannya`get-operation-detail`. Untuk informasi selengkapnya, lihat [get-operation-detail](https://docs.aws.amazon.com/cli/latest/reference/route53domains/get-operation-detail.html).
Untuk informasi lebih lanjut, lihat [Mendaftarkan Domain Baru](https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/domain-register.html) dalam *Panduan Pengembang Amazon Route 53*.
Untuk informasi tentang domain tingkat atas (TLDs) mana yang memerlukan nilai `ExtraParams` dan nilai validnya, lihat [ExtraParam](https://docs.aws.amazon.com/Route53/latest/APIReference/API_domains_ExtraParam.html)di Referensi *API Amazon Route 53*.
+ Untuk detail API, lihat [RegisterDomain](https://awscli.amazonaws.com/v2/documentation/api/latest/reference/route53domains/register-domain.html)di *Referensi AWS CLI Perintah*.
------
#### [ Java ]
**SDK untuk Java 2.x**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/javav2/example_code/route53#code-examples).
```
public static String requestDomainRegistration(Route53DomainsClient route53DomainsClient,
String domainSuggestion,
String phoneNumber,
String email,
String firstName,
String lastName,
String city) {
try {
ContactDetail contactDetail = ContactDetail.builder()
.contactType(ContactType.COMPANY)
.state("LA")
.countryCode(CountryCode.IN)
.email(email)
.firstName(firstName)
.lastName(lastName)
.city(city)
.phoneNumber(phoneNumber)
.organizationName("My Org")
.addressLine1("My Address")
.zipCode("123 123")
.build();
RegisterDomainRequest domainRequest = RegisterDomainRequest.builder()
.adminContact(contactDetail)
.registrantContact(contactDetail)
.techContact(contactDetail)
.domainName(domainSuggestion)
.autoRenew(true)
.durationInYears(1)
.build();
RegisterDomainResponse response = route53DomainsClient.registerDomain(domainRequest);
System.out.println("Registration requested. Operation Id: " + response.operationId());
return response.operationId();
} catch (Route53Exception e) {
System.err.println(e.getMessage());
System.exit(1);
}
return "";
}
```
+ Untuk detail API, lihat [RegisterDomain](https://docs.aws.amazon.com/goto/SdkForJavaV2/route53domains-2014-05-15/RegisterDomain)di *Referensi AWS SDK for Java 2.x API*.
------
#### [ Kotlin ]
**SDK untuk Kotlin**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/kotlin/services/route53#code-examples).
```
suspend fun requestDomainRegistration(
domainSuggestion: String?,
phoneNumberVal: String?,
emailVal: String?,
firstNameVal: String?,
lastNameVal: String?,
cityVal: String?,
): String? {
val contactDetail =
ContactDetail {
contactType = ContactType.Company
state = "LA"
countryCode = CountryCode.In
email = emailVal
firstName = firstNameVal
lastName = lastNameVal
city = cityVal
phoneNumber = phoneNumberVal
organizationName = "My Org"
addressLine1 = "My Address"
zipCode = "123 123"
}
val domainRequest =
RegisterDomainRequest {
adminContact = contactDetail
registrantContact = contactDetail
techContact = contactDetail
domainName = domainSuggestion
autoRenew = true
durationInYears = 1
}
Route53DomainsClient.fromEnvironment { region = "us-east-1" }.use { route53DomainsClient ->
val response = route53DomainsClient.registerDomain(domainRequest)
println("Registration requested. Operation Id: ${response.operationId}")
return response.operationId
}
}
```
+ Untuk detail API, lihat [RegisterDomain](https://sdk.amazonaws.com/kotlin/api/latest/index.html)di *AWS SDK untuk referensi API Kotlin*.
------
Untuk daftar lengkap panduan pengembang AWS SDK dan contoh kode, lihat[Menggunakan Route 53 dengan AWS SDK](sdk-general-information-section.md). Topik ini juga mencakup informasi tentang memulai dan detail tentang versi SDK sebelumnya.
# Gunakan `ViewBilling` dengan AWS SDK atau CLI
Contoh kode berikut menunjukkan cara menggunakan`ViewBilling`.
Contoh tindakan adalah kutipan kode dari program yang lebih besar dan harus dijalankan dalam konteks. Anda dapat melihat tindakan ini dalam konteks dalam contoh kode berikut:
+ [Pelajari dasar-dasarnya](route-53-domains_example_route-53-domains_Scenario_GetStartedRoute53Domains_section.md)
------
#### [ .NET ]
**SDK untuk .NET**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/dotnetv3/Route53#code-examples).
```
///
/// View billing records for the account between a start and end date.
///
/// The start date for billing results.
/// The end date for billing results.
/// A collection of billing records.
public async Task> ViewBilling(DateTime startDate, DateTime endDate)
{
var results = new List();
var paginateBilling = _amazonRoute53Domains.Paginators.ViewBilling(
new ViewBillingRequest()
{
Start = startDate,
End = endDate
});
// Get the entire list using the paginator.
await foreach (var billingRecords in paginateBilling.BillingRecords)
{
results.Add(billingRecords);
}
return results;
}
```
+ Untuk detail API, lihat [ViewBilling](https://docs.aws.amazon.com/goto/DotNetSDKV3/route53domains-2014-05-15/ViewBilling)di *Referensi AWS SDK untuk .NET API*.
------
#### [ CLI ]
**AWS CLI**
**Untuk mendapatkan informasi penagihan untuk biaya pendaftaran domain untuk akun saat ini AWS **
`view-billing`Perintah berikut mengembalikan semua catatan penagihan terkait domain untuk akun saat ini untuk periode dari 1 Januari 2018 (1514764800 dalam waktu Unix) dan tengah malam pada tanggal 31 Desember 2019 (1577836800 dalam waktu Unix).
Perintah ini hanya berjalan di `us-east-1` Wilayah. Jika wilayah default Anda diatur ke`us-east-1`, Anda dapat menghilangkan `region` parameter.
```
aws route53domains view-billing \
--region us-east-1 \
--start-time 1514764800 \
--end-time 1577836800
```
Output:
```
{
"BillingRecords": [
{
"DomainName": "example.com",
"Operation": "RENEW_DOMAIN",
"InvoiceId": "149962827",
"BillDate": 1536618063.181,
"Price": 12.0
},
{
"DomainName": "example.com",
"Operation": "RENEW_DOMAIN",
"InvoiceId": "290913289",
"BillDate": 1568162630.884,
"Price": 12.0
}
]
}
```
Untuk informasi selengkapnya, lihat [ViewBilling](https://docs.aws.amazon.com/Route53/latest/APIReference/API_domains_ViewBilling.html)di *Referensi API Amazon Route 53*.
+ Untuk detail API, lihat [ViewBilling](https://awscli.amazonaws.com/v2/documentation/api/latest/reference/route53domains/view-billing.html)di *Referensi AWS CLI Perintah*.
------
#### [ Java ]
**SDK untuk Java 2.x**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/javav2/example_code/route53#code-examples).
```
public static void listBillingRecords(Route53DomainsClient route53DomainsClient) {
try {
Date currentDate = new Date();
LocalDateTime localDateTime = currentDate.toInstant().atZone(ZoneId.systemDefault()).toLocalDateTime();
ZoneOffset zoneOffset = ZoneOffset.of("+01:00");
LocalDateTime localDateTime2 = localDateTime.minusYears(1);
Instant myStartTime = localDateTime2.toInstant(zoneOffset);
Instant myEndTime = localDateTime.toInstant(zoneOffset);
ViewBillingRequest viewBillingRequest = ViewBillingRequest.builder()
.start(myStartTime)
.end(myEndTime)
.build();
ViewBillingIterable listRes = route53DomainsClient.viewBillingPaginator(viewBillingRequest);
listRes.stream()
.flatMap(r -> r.billingRecords().stream())
.forEach(content -> System.out.println(" Bill Date:: " + content.billDate() +
" Operation: " + content.operationAsString() +
" Price: " + content.price()));
} catch (Route53Exception e) {
System.err.println(e.getMessage());
System.exit(1);
}
}
```
+ Untuk detail API, lihat [ViewBilling](https://docs.aws.amazon.com/goto/SdkForJavaV2/route53domains-2014-05-15/ViewBilling)di *Referensi AWS SDK for Java 2.x API*.
------
#### [ Kotlin ]
**SDK untuk Kotlin**
Ada lebih banyak tentang GitHub. Temukan contoh lengkapnya dan pelajari cara mengatur dan menjalankannya di [Repositori Contoh Kode AWS](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/kotlin/services/route53#code-examples).
```
suspend fun listBillingRecords() {
val currentDate = Date()
val localDateTime = currentDate.toInstant().atZone(ZoneId.systemDefault()).toLocalDateTime()
val zoneOffset = ZoneOffset.of("+01:00")
val localDateTime2 = localDateTime.minusYears(1)
val myStartTime = localDateTime2.toInstant(zoneOffset)
val myEndTime = localDateTime.toInstant(zoneOffset)
val timeStart: Instant? = myStartTime?.let { Instant(it) }
val timeEnd: Instant? = myEndTime?.let { Instant(it) }
val viewBillingRequest =
ViewBillingRequest {
start = timeStart
end = timeEnd
}
Route53DomainsClient.fromEnvironment { region = "us-east-1" }.use { route53DomainsClient ->
route53DomainsClient
.viewBillingPaginated(viewBillingRequest)
.transform { it.billingRecords?.forEach { obj -> emit(obj) } }
.collect { billing ->
println("Bill Date: ${billing.billDate}")
println("Operation: ${billing.operation}")
println("Price: ${billing.price}")
}
}
}
```
+ Untuk detail API, lihat [ViewBilling](https://sdk.amazonaws.com/kotlin/api/latest/index.html)di *AWS SDK untuk referensi API Kotlin*.
------
Untuk daftar lengkap panduan pengembang AWS SDK dan contoh kode, lihat[Menggunakan Route 53 dengan AWS SDK](sdk-general-information-section.md). Topik ini juga mencakup informasi tentang memulai dan detail tentang versi SDK sebelumnya.