Request Syntax Request Parameters Response Syntax Response Elements Errors Examples See Also

DeleteTable

The DeleteTable operation deletes a table and all of its items. After a DeleteTable request, the specified table is in the DELETING state until DynamoDB completes the deletion. If the table is in the ACTIVE state, you can delete it. If a table is in CREATING or UPDATING states, then DynamoDB returns a ResourceInUseException. If the specified table does not exist, DynamoDB returns a ResourceNotFoundException. If table is already in the DELETING state, no error is returned.

Important

For global tables, this operation only applies to global tables using Version 2019.11.21 (Current version).

Note

DynamoDB might continue to accept data read and write operations, such as GetItem and PutItem, on a table in the DELETING state until the table deletion is complete. For the full list of table states, see TableStatus.

When you delete a table, any indexes on that table are also deleted.

If you have DynamoDB Streams enabled on the table, then the corresponding stream on that table goes into the DISABLED state, and the stream is automatically deleted after 24 hours.

Use the DescribeTable action to check the status of the table.

Request Syntax


{
   "TableName": "string"
}

Request Parameters

The request accepts the following data in JSON format.

Note

In the following list, the required parameters are described first.

TableName

The name of the table to delete. You can also provide the Amazon Resource Name (ARN) of the table in this parameter.

Type: String

Length Constraints: Minimum length of 1. Maximum length of 1024.

Required: Yes

Response Syntax


{
   "TableDescription": { 
      "ArchivalSummary": { 
         "ArchivalBackupArn": "string",
         "ArchivalDateTime": number,
         "ArchivalReason": "string"
      },
      "AttributeDefinitions": [ 
         { 
            "AttributeName": "string",
            "AttributeType": "string"
         }
      ],
      "BillingModeSummary": { 
         "BillingMode": "string",
         "LastUpdateToPayPerRequestDateTime": number
      },
      "CreationDateTime": number,
      "DeletionProtectionEnabled": boolean,
      "GlobalSecondaryIndexes": [ 
         { 
            "Backfilling": boolean,
            "IndexArn": "string",
            "IndexName": "string",
            "IndexSizeBytes": number,
            "IndexStatus": "string",
            "ItemCount": number,
            "KeySchema": [ 
               { 
                  "AttributeName": "string",
                  "KeyType": "string"
               }
            ],
            "OnDemandThroughput": { 
               "MaxReadRequestUnits": number,
               "MaxWriteRequestUnits": number
            },
            "Projection": { 
               "NonKeyAttributes": [ "string" ],
               "ProjectionType": "string"
            },
            "ProvisionedThroughput": { 
               "LastDecreaseDateTime": number,
               "LastIncreaseDateTime": number,
               "NumberOfDecreasesToday": number,
               "ReadCapacityUnits": number,
               "WriteCapacityUnits": number
            },
            "WarmThroughput": { 
               "ReadUnitsPerSecond": number,
               "Status": "string",
               "WriteUnitsPerSecond": number
            }
         }
      ],
      "GlobalTableVersion": "string",
      "ItemCount": number,
      "KeySchema": [ 
         { 
            "AttributeName": "string",
            "KeyType": "string"
         }
      ],
      "LatestStreamArn": "string",
      "LatestStreamLabel": "string",
      "LocalSecondaryIndexes": [ 
         { 
            "IndexArn": "string",
            "IndexName": "string",
            "IndexSizeBytes": number,
            "ItemCount": number,
            "KeySchema": [ 
               { 
                  "AttributeName": "string",
                  "KeyType": "string"
               }
            ],
            "Projection": { 
               "NonKeyAttributes": [ "string" ],
               "ProjectionType": "string"
            }
         }
      ],
      "MultiRegionConsistency": "string",
      "OnDemandThroughput": { 
         "MaxReadRequestUnits": number,
         "MaxWriteRequestUnits": number
      },
      "ProvisionedThroughput": { 
         "LastDecreaseDateTime": number,
         "LastIncreaseDateTime": number,
         "NumberOfDecreasesToday": number,
         "ReadCapacityUnits": number,
         "WriteCapacityUnits": number
      },
      "Replicas": [ 
         { 
            "GlobalSecondaryIndexes": [ 
               { 
                  "IndexName": "string",
                  "OnDemandThroughputOverride": { 
                     "MaxReadRequestUnits": number
                  },
                  "ProvisionedThroughputOverride": { 
                     "ReadCapacityUnits": number
                  },
                  "WarmThroughput": { 
                     "ReadUnitsPerSecond": number,
                     "Status": "string",
                     "WriteUnitsPerSecond": number
                  }
               }
            ],
            "KMSMasterKeyId": "string",
            "OnDemandThroughputOverride": { 
               "MaxReadRequestUnits": number
            },
            "ProvisionedThroughputOverride": { 
               "ReadCapacityUnits": number
            },
            "RegionName": "string",
            "ReplicaInaccessibleDateTime": number,
            "ReplicaStatus": "string",
            "ReplicaStatusDescription": "string",
            "ReplicaStatusPercentProgress": "string",
            "ReplicaTableClassSummary": { 
               "LastUpdateDateTime": number,
               "TableClass": "string"
            },
            "WarmThroughput": { 
               "ReadUnitsPerSecond": number,
               "Status": "string",
               "WriteUnitsPerSecond": number
            }
         }
      ],
      "RestoreSummary": { 
         "RestoreDateTime": number,
         "RestoreInProgress": boolean,
         "SourceBackupArn": "string",
         "SourceTableArn": "string"
      },
      "SSEDescription": { 
         "InaccessibleEncryptionDateTime": number,
         "KMSMasterKeyArn": "string",
         "SSEType": "string",
         "Status": "string"
      },
      "StreamSpecification": { 
         "StreamEnabled": boolean,
         "StreamViewType": "string"
      },
      "TableArn": "string",
      "TableClassSummary": { 
         "LastUpdateDateTime": number,
         "TableClass": "string"
      },
      "TableId": "string",
      "TableName": "string",
      "TableSizeBytes": number,
      "TableStatus": "string",
      "WarmThroughput": { 
         "ReadUnitsPerSecond": number,
         "Status": "string",
         "WriteUnitsPerSecond": number
      }
   }
}

Response Elements

If the action is successful, the service sends back an HTTP 200 response.

The following data is returned in JSON format by the service.

TableDescription

Represents the properties of a table.

Type: TableDescription object

Errors

For information about the errors that are common to all actions, see Common Errors.

InternalServerError

An error occurred on the server side.

HTTP Status Code: 500

LimitExceededException

There is no limit to the number of daily on-demand backups that can be taken.

For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable,UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.

When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.

When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.

There is a soft account quota of 2,500 tables.

GetRecords was called with a value of more than 1000 for the limit request parameter.

More than 2 processes are reading from the same streams shard at the same time. Exceeding this limit may result in request throttling.

HTTP Status Code: 400

ResourceInUseException

The operation conflicts with the resource's availability. For example:

You attempted to recreate an existing table.
You tried to delete a table currently in the CREATING state.
You tried to update a resource that was already being updated.

When appropriate, wait for the ongoing update to complete and attempt the request again.

HTTP Status Code: 400

ResourceNotFoundException

The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.

HTTP Status Code: 400

Examples

Delete a Table

This example deletes the Reply table.

Sample Request


POST / HTTP/1.1
Host: dynamodb.<region>.<domain>;
Accept-Encoding: identity
Content-Length: <PayloadSizeBytes>
User-Agent: <UserAgentString>
Content-Type: application/x-amz-json-1.0
Authorization: AWS4-HMAC-SHA256 Credential=<Credential>, SignedHeaders=<Headers>, Signature=<Signature>
X-Amz-Date: <Date>
X-Amz-Target: DynamoDB_20120810.DeleteTable

{
    "TableName": "Reply"
}

Sample Response


HTTP/1.1 200 OK
x-amzn-RequestId: <RequestId>
x-amz-crc32: <Checksum>
Content-Type: application/x-amz-json-1.0
Content-Length: <PayloadSizeBytes>
Date: <Date>
 {
    "TableDescription": {
        "TableArn": "arn:aws:dynamodb:us-west-2:123456789012:table/Reply",
        "ItemCount": 0,
        "ProvisionedThroughput": {
            "NumberOfDecreasesToday": 0,
            "ReadCapacityUnits": 5,
            "WriteCapacityUnits": 5
        },
        "TableName": "Reply",
        "TableSizeBytes": 0,
        "TableStatus": "DELETING"
    }
}