CodePipeline contoh menggunakan Alat untuk PowerShell

Contoh kode berikut menunjukkan cara melakukan tindakan dan mengimplementasikan skenario umum dengan menggunakan AWS Tools for PowerShell with CodePipeline.

Tindakan adalah kutipan kode dari program yang lebih besar dan harus dijalankan dalam konteks. Sementara tindakan menunjukkan cara memanggil fungsi layanan individual, Anda dapat melihat tindakan dalam konteks dalam skenario terkait.

Setiap contoh menyertakan tautan ke kode sumber lengkap, di mana Anda dapat menemukan instruksi tentang cara mengatur dan menjalankan kode dalam konteks.

Topik

Tindakan

Tindakan

Contoh kode berikut menunjukkan cara menggunakanConfirm-CPJob.

Alat untuk PowerShell

Contoh 1: Contoh ini mendapatkan status pekerjaan yang ditentukan.


Confirm-CPJob -JobId f570dc12-5ef3-44bc-945a-6e133EXAMPLE -Nonce 3

Output:


Value
-----
InProgress

Untuk API detailnya, lihat AcknowledgeJobdi AWS Tools for PowerShell Referensi Cmdlet.

Contoh kode berikut menunjukkan cara menggunakanDisable-CPStageTransition.

Alat untuk PowerShell

Contoh 1: Contoh ini menonaktifkan transisi masuk untuk tahap tertentu dalam pipeline yang ditentukan.


Disable-CPStageTransition -PipelineName CodePipelineDemo -Reason "Disabling temporarily." -StageName Beta -TransitionType Inbound

Untuk API detailnya, lihat DisableStageTransitiondi AWS Tools for PowerShell Referensi Cmdlet.

Contoh kode berikut menunjukkan cara menggunakanEnable-CPStageTransition.

Alat untuk PowerShell

Contoh 1: Contoh ini memungkinkan transisi inbound untuk tahap tertentu dalam pipeline yang ditentukan.


Enable-CPStageTransition -PipelineName CodePipelineDemo -StageName Beta -TransitionType Inbound

Untuk API detailnya, lihat EnableStageTransitiondi AWS Tools for PowerShell Referensi Cmdlet.

Contoh kode berikut menunjukkan cara menggunakanGet-CPActionType.

Alat untuk PowerShell

Contoh 1: Contoh ini mendapatkan informasi tentang semua tindakan yang tersedia untuk pemilik yang ditentukan.


ForEach ($actionType in (Get-CPActionType -ActionOwnerFilter AWS)) {
  Write-Output ("For Category = " + $actionType.Id.Category + ", Owner = " + $actionType.Id.Owner + ", Provider = " + $actionType.Id.Provider + ", Version = " + $actionType.Id.Version + ":")
  Write-Output ("  ActionConfigurationProperties:")
  ForEach ($acp in $actionType.ActionConfigurationProperties) {
    Write-Output ("    For " + $acp.Name + ":")
    Write-Output ("      Description = " + $acp.Description)
    Write-Output ("      Key = " + $acp.Key)
    Write-Output ("      Queryable = " + $acp.Queryable)
    Write-Output ("      Required = " + $acp.Required)
    Write-Output ("      Secret = " + $acp.Secret)
  }
  Write-Output ("  InputArtifactDetails:")
  Write-Output ("    MaximumCount = " + $actionType.InputArtifactDetails.MaximumCount)
  Write-Output ("    MinimumCount = " + $actionType.InputArtifactDetails.MinimumCount)
  Write-Output ("  OutputArtifactDetails:")
  Write-Output ("    MaximumCount = " + $actionType.OutputArtifactDetails.MaximumCount)
  Write-Output ("    MinimumCount = " + $actionType.OutputArtifactDetails.MinimumCount)
  Write-Output ("  Settings:")
  Write-Output ("    EntityUrlTemplate = " + $actionType.Settings.EntityUrlTemplate)
  Write-Output ("    ExecutionUrlTemplate = " + $actionType.Settings.ExecutionUrlTemplate)
}

Output:


For Category = Deploy, Owner = AWS, Provider = ElasticBeanstalk, Version = 1:
  ActionConfigurationProperties:
    For ApplicationName:
      Description = The AWS Elastic Beanstalk Application name
      Key = True
      Queryable = False
      Required = True
      Secret = False
    For EnvironmentName:
      Description = The AWS Elastic Beanstalk Environment name
      Key = True
      Queryable = False
      Required = True
      Secret = False
  InputArtifactDetails:
    MaximumCount = 1
    MinimumCount = 1
  OutputArtifactDetails:
    MaximumCount = 0
    MinimumCount = 0
  Settings:
    EntityUrlTemplate = https://console.aws.amazon.com/elasticbeanstalk/r/application/{Config:ApplicationName}
    ExecutionUrlTemplate = https://console.aws.amazon.com/elasticbeanstalk/r/application/{Config:ApplicationName} 
For Category = Deploy, Owner = AWS, Provider = CodeDeploy, Version = 1:
  ActionConfigurationProperties:
    For ApplicationName:
      Description = The AWS CodeDeploy Application name
      Key = True
      Queryable = False
      Required = True
      Secret = False
    For DeploymentGroupName:
      Description = The AWS CodeDeploy Deployment Group name
      Key = True
      Queryable = False
      Required = True
      Secret = False
  InputArtifactDetails:
    MaximumCount = 1
    MinimumCount = 1
  OutputArtifactDetails:
    MaximumCount = 0
    MinimumCount = 0
  Settings:
    EntityUrlTemplate = https://console.aws.amazon.com/codedeploy/home?#/applications/{Config:ApplicationName}/deployment-groups/{Config:DeploymentGroupName}
    ExecutionUrlTemplate = https://console.aws.amazon.com/codedeploy/home?#/deployments/{ExternalExecutionId}

Untuk API detailnya, lihat ListActionTypesdi AWS Tools for PowerShell Referensi Cmdlet.

Contoh kode berikut menunjukkan cara menggunakanGet-CPActionableJobList.

Alat untuk PowerShell

Contoh 1: Contoh ini mendapatkan informasi tentang semua pekerjaan yang dapat ditindaklanjuti untuk kategori tindakan tertentu, pemilik, penyedia, versi, dan parameter kueri.


Get-CPActionableJobList -ActionTypeId_Category Build -ActionTypeId_Owner Custom -ActionTypeId_Provider MyCustomProviderName -ActionTypeId_Version 1 -QueryParam @{"ProjectName" = "MyProjectName"}

Output:


AccountId       Data                                 Id                                      Nonce
---------       ----                                 --                                      -----
80398EXAMPLE    Amazon.CodePipeline.Model.JobData    0de392f5-712d-4f41-ace3-f57a0EXAMPLE    3

Untuk API detailnya, lihat PollForJobsdi AWS Tools for PowerShell Referensi Cmdlet.

Contoh kode berikut menunjukkan cara menggunakanGet-CPJobDetail.

Alat untuk PowerShell

Contoh 1: Contoh ini mendapatkan informasi umum tentang pekerjaan yang ditentukan.


Get-CPJobDetail -JobId f570dc12-5ef3-44bc-945a-6e133EXAMPLE

Output:


AccountId       Data                                 Id
---------       ----                                 --
80398EXAMPLE    Amazon.CodePipeline.Model.JobData    f570dc12-5ef3-44bc-945a-6e133EXAMPLE

Contoh 2: Contoh ini mendapatkan informasi rinci tentang pekerjaan yang ditentukan.


$jobDetails = Get-CPJobDetail -JobId f570dc12-5ef3-44bc-945a-6e133EXAMPLE
Write-Output ("For Job " + $jobDetails.Id + ":")
Write-Output ("  AccountId = " + $jobDetails.AccountId)
$jobData = $jobDetails.Data
Write-Output ("  Configuration:")
ForEach ($key in $jobData.ActionConfiguration.Keys) {
  $value = $jobData.ActionConfiguration.$key
  Write-Output ("    " + $key + " = " + $value)
}
Write-Output ("  ActionTypeId:")
Write-Output ("    Category = " + $jobData.ActionTypeId.Category)
Write-Output ("    Owner = " + $jobData.ActionTypeId.Owner)
Write-Output ("    Provider = " + $jobData.ActionTypeId.Provider)
Write-Output ("    Version = " + $jobData.ActionTypeId.Version)
Write-Output ("  ArtifactCredentials:")
Write-Output ("    AccessKeyId = " + $jobData.ArtifactCredentials.AccessKeyId)
Write-Output ("    SecretAccessKey = " + $jobData.ArtifactCredentials.SecretAccessKey)
Write-Output ("    SessionToken = " + $jobData.ArtifactCredentials.SessionToken)
Write-Output ("  InputArtifacts:")
ForEach ($ia in $jobData.InputArtifacts) {
  Write-Output ("    " + $ia.Name)
}
Write-Output ("  OutputArtifacts:")
ForEach ($oa in $jobData.OutputArtifacts) {
  Write-Output ("    " + $oa.Name)
}
Write-Output ("  PipelineContext:")
$context = $jobData.PipelineContext
Write-Output ("    Name = " + $context.Action.Name)
Write-Output ("    PipelineName = " + $context.PipelineName)
Write-Output ("    Stage = " + $context.Stage.Name)

Output:


For Job f570dc12-5ef3-44bc-945a-6e133EXAMPLE:
  AccountId = 80398EXAMPLE
  Configuration:
  ActionTypeId:
    Category = Build
    Owner = Custom
    Provider = MyCustomProviderName
    Version = 1
  ArtifactCredentials:
    AccessKeyId = ASIAIEI3...IXI6YREX
    SecretAccessKey = cqAFDhEi...RdQyfa2u
    SessionToken = AQoDYXdz...5u+lsAU=
  InputArtifacts:
    MyApp
  OutputArtifacts:
    MyAppBuild
  PipelineContext:
    Name = Build
    PipelineName = CodePipelineDemo
    Stage = Build

Untuk API detailnya, lihat GetJobDetailsdi AWS Tools for PowerShell Referensi Cmdlet.

Contoh kode berikut menunjukkan cara menggunakanGet-CPPipeline.

Alat untuk PowerShell

Contoh 1: Contoh ini mendapatkan informasi umum tentang pipeline yang ditentukan.


Get-CPPipeline -Name CodePipelineDemo -Version 1

Output:


ArtifactStore : Amazon.CodePipeline.Model.ArtifactStore
Name          : CodePipelineDemo
RoleArn       : arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole
Stages        : {Source, Build, Beta, TestStage}
Version       : 1

Contoh 2: Contoh ini mendapatkan informasi rinci tentang pipeline yang ditentukan.


$pipeline = Get-CPPipeline -Name CodePipelineDemo
Write-Output ("Name = " + $pipeline.Name)
Write-Output ("RoleArn = " + $pipeline.RoleArn)
Write-Output ("Version = " + $pipeline.Version)
Write-Output ("ArtifactStore:")
Write-Output ("  Location = " + $pipeline.ArtifactStore.Location)
Write-Output ("  Type = " + $pipeline.ArtifactStore.Type.Value)
Write-Output ("Stages:")
ForEach ($stage in $pipeline.Stages) {
  Write-Output ("  Name = " + $stage.Name)
  Write-Output ("    Actions:")
  ForEach ($action in $stage.Actions) {
    Write-Output ("      Name = " + $action.Name)
	Write-Output ("        Category = " + $action.ActionTypeId.Category)
	Write-Output ("        Owner = " + $action.ActionTypeId.Owner)
	Write-Output ("        Provider = " + $action.ActionTypeId.Provider)
	Write-Output ("        Version = " + $action.ActionTypeId.Version)
	Write-Output ("        Configuration:")
	ForEach ($key in $action.Configuration.Keys) {
	  $value = $action.Configuration.$key
	  Write-Output ("          " + $key + " = " + $value)
	}
	Write-Output ("        InputArtifacts:")
	ForEach ($ia in $action.InputArtifacts) {
	  Write-Output ("          " + $ia.Name)
	}
	ForEach ($oa in $action.OutputArtifacts) {
	  Write-Output ("          " + $oa.Name)
	}
	Write-Output ("        RunOrder = " + $action.RunOrder)
  }
}

Output:


Name = CodePipelineDemo
RoleArn = arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole
Version = 3
ArtifactStore:
  Location = MyBucketName
  Type = S3
Stages:
  Name = Source
    Actions:
      Name = Source
        Category = Source
        Owner = ThirdParty
        Provider = GitHub
        Version = 1
        Configuration:
          Branch = master
          OAuthToken = ****
          Owner = my-user-name
          Repo = MyRepoName
        InputArtifacts:
          MyApp
        RunOrder = 1
  Name = Build
    Actions:
      Name = Build
        Category = Build
        Owner = Custom
        Provider = MyCustomProviderName
        Version = 1
        Configuration:
          ProjectName = MyProjectName
        InputArtifacts:
          MyApp
          MyAppBuild
        RunOrder = 1
  Name = Beta
    Actions:
      Name = CodePipelineDemoFleet
        Category = Deploy
        Owner = AWS
        Provider = CodeDeploy
        Version = 1
        Configuration:
          ApplicationName = CodePipelineDemoApplication
          DeploymentGroupName = CodePipelineDemoFleet
        InputArtifacts:
          MyAppBuild
        RunOrder = 1
  Name = TestStage
    Actions:
      Name = MyJenkinsTestAction
        Category = Test
        Owner = Custom
        Provider = MyCustomTestProvider
        Version = 1
        Configuration:
          ProjectName = MyJenkinsProjectName
        InputArtifacts:
          MyAppBuild
        RunOrder = 1

Untuk API detailnya, lihat GetPipelinedi AWS Tools for PowerShell Referensi Cmdlet.

Contoh kode berikut menunjukkan cara menggunakanGet-CPPipelineList.

Alat untuk PowerShell

Contoh 1: Contoh ini mendapatkan daftar pipeline yang tersedia.


Get-CPPipelineList

Output:


Created                  Name                Updated                  Version
-------                  ----                -------                  -------
8/13/2015 10:17:54 PM    CodePipelineDemo    8/13/2015 10:17:54 PM    3
7/8/2015 2:41:53 AM      MyFirstPipeline     7/22/2015 9:06:37 PM     7

Untuk API detailnya, lihat ListPipelinesdi AWS Tools for PowerShell Referensi Cmdlet.

Contoh kode berikut menunjukkan cara menggunakanGet-CPPipelineState.

Alat untuk PowerShell

Contoh 1: Contoh ini mendapatkan informasi umum tentang tahapan untuk pipeline yang ditentukan.


Get-CPPipelineState -Name CodePipelineDemo

Output:


Created         : 8/13/2015 10:17:54 PM
PipelineName    : CodePipelineDemo
PipelineVersion : 1
StageStates     : {Source, Build, Beta, TestStage}
Updated         : 8/13/2015 10:17:54 PM

Contoh 2: Contoh ini mendapatkan informasi rinci tentang keadaan pipa yang ditentukan.


ForEach ($stageState in (Get-CPPipelineState -Name $arg).StageStates) {
  Write-Output ("For " + $stageState.StageName + ":")
  Write-Output ("  InboundTransitionState:")
  Write-Output ("    DisabledReason = " + $stageState.InboundTransitionState.DisabledReason)
  Write-Output ("    Enabled = " + $stageState.InboundTransitionState.Enabled)
  Write-Output ("    LastChangedAt = " + $stageState.InboundTransitionState.LastChangedAt)
  Write-Output ("    LastChangedBy = " + $stageState.InboundTransitionState.LastChangedBy)
  Write-Output ("  ActionStates:")
  ForEach ($actionState in $stageState.ActionStates) {
    Write-Output ("    For " + $actionState.ActionName + ":")
	Write-Output ("      CurrentRevision:")
    Write-Output ("        Created = " + $actionState.CurrentRevision.Created)
	Write-Output ("        RevisionChangeId = " + $actionState.CurrentRevision.RevisionChangeId)
	Write-Output ("        RevisionId = " + $actionState.CurrentRevision.RevisionId)
	Write-Output ("      EntityUrl = " + $actionState.EntityUrl)
	Write-Output ("      LatestExecution:")
    Write-Output ("        ErrorDetails:")
    Write-Output ("          Code = " + $actionState.LatestExecution.ErrorDetails.Code)
	Write-Output ("          Message = " + $actionState.LatestExecution.ErrorDetails.Message)
	Write-Output ("        ExternalExecutionId = " + $actionState.LatestExecution.ExternalExecutionId)
	Write-Output ("        ExternalExecutionUrl = " + $actionState.LatestExecution.ExternalExecutionUrl)
	Write-Output ("        LastStatusChange	= " + $actionState.LatestExecution.LastStatusChange)
	Write-Output ("        PercentComplete = " + $actionState.LatestExecution.PercentComplete)
	Write-Output ("        Status = " + $actionState.LatestExecution.Status)
	Write-Output ("        Summary = " + $actionState.LatestExecution.Summary)
	Write-Output ("      RevisionUrl = " + $actionState.RevisionUrl)
  }
}

Output:


For Source:
  InboundTransitionState:
    DisabledReason =
    Enabled =
    LastChangedAt =
    LastChangedBy =
  ActionStates:
    For Source:
      CurrentRevision:
        Created =
        RevisionChangeId =
        RevisionId =
      EntityUrl = https://github.com/my-user-name/MyRepoName/tree/master
      LatestExecution:
        ErrorDetails:
          Code =
          Message =
        ExternalExecutionId =
        ExternalExecutionUrl =
        LastStatusChange = 07/20/2015 23:28:45
        PercentComplete = 0
        Status = Succeeded
        Summary =
      RevisionUrl =
For Build:
  InboundTransitionState:
    DisabledReason =
    Enabled = True
    LastChangedAt = 01/01/0001 00:00:00
    LastChangedBy =
  ActionStates:
    For Build:
      CurrentRevision:
        Created =
        RevisionChangeId =
        RevisionId =
      EntityUrl = http://54.174.131.1EX/job/MyJenkinsDemo
      LatestExecution:
        ErrorDetails:
          Code = TimeoutError
          Message = The action failed because a job worker exceeded its time limit. If this is a custom action, make sure that the job worker is configured correctly.
        ExternalExecutionId =
        ExternalExecutionUrl =
        LastStatusChange = 07/21/2015 00:29:29
        PercentComplete = 0
        Status = Failed
        Summary =
      RevisionUrl =
For Beta:
  InboundTransitionState:
    DisabledReason =
    Enabled = True
    LastChangedAt = 01/01/0001 00:00:00
    LastChangedBy =
  ActionStates:
    For CodePipelineDemoFleet:
      CurrentRevision:
        Created =
        RevisionChangeId =
        RevisionId =
      EntityUrl = https://console.aws.amazon.com/codedeploy/home?#/applications/CodePipelineDemoApplication/deployment-groups/CodePipelineDemoFleet
      LatestExecution:
        ErrorDetails:
          Code =
          Message =
        ExternalExecutionId = d-D5LTCZXEX
        ExternalExecutionUrl = https://console.aws.amazon.com/codedeploy/home?#/deployments/d-D5LTCZXEX
        LastStatusChange = 07/08/2015 22:07:42
        PercentComplete = 0
        Status = Succeeded
        Summary = Deployment Succeeded
      RevisionUrl =
For TestStage:
  InboundTransitionState:
    DisabledReason =
    Enabled = True
    LastChangedAt = 01/01/0001 00:00:00
    LastChangedBy =
  ActionStates:
    For MyJenkinsTestAction25:
      CurrentRevision:
        Created =
        RevisionChangeId =
        RevisionId =
      EntityUrl = http://54.174.131.1EX/job/MyJenkinsDemo
      LatestExecution:
        ErrorDetails:
          Code =
          Message =
        ExternalExecutionId = 5
        ExternalExecutionUrl = http://54.174.131.1EX/job/MyJenkinsDemo/5
        LastStatusChange = 07/08/2015 22:09:03
        PercentComplete = 0
        Status = Succeeded
        Summary = Finished
      RevisionUrl =

Untuk API detailnya, lihat GetPipelineStatedi AWS Tools for PowerShell Referensi Cmdlet.

Contoh kode berikut menunjukkan cara menggunakanNew-CPCustomActionType.

Alat untuk PowerShell

Contoh 1: Contoh ini membuat tindakan kustom baru dengan properti yang ditentukan.


New-CPCustomActionType -Category Build -ConfigurationProperty @{"Description" = "The name of the build project must be provided when this action is added to the pipeline."; "Key" = $True; "Name" = "ProjectName"; "Queryable" = $False; "Required" = $True; "Secret" = $False; "Type" = "String"} -Settings_EntityUrlTemplate "https://my-build-instance/job/{Config:ProjectName}/" -Settings_ExecutionUrlTemplate "https://my-build-instance/job/mybuildjob/lastSuccessfulBuild{ExternalExecutionId}/" -InputArtifactDetails_MaximumCount 1 -OutputArtifactDetails_MaximumCount 1 -InputArtifactDetails_MinimumCount 0 -OutputArtifactDetails_MinimumCount 0 -Provider "MyBuildProviderName" -Version 1

Output:


ActionConfigurationProperties : {ProjectName}
Id                            : Amazon.CodePipeline.Model.ActionTypeId
InputArtifactDetails          : Amazon.CodePipeline.Model.ArtifactDetails
OutputArtifactDetails         : Amazon.CodePipeline.Model.ArtifactDetails
Settings                      : Amazon.CodePipeline.Model.ActionTypeSettings

Untuk API detailnya, lihat CreateCustomActionTypedi AWS Tools for PowerShell Referensi Cmdlet.

Contoh kode berikut menunjukkan cara menggunakanNew-CPPipeline.

Alat untuk PowerShell

Contoh 1: Contoh ini membuat pipeline baru dengan pengaturan yang ditentukan.


$pipeline = New-Object Amazon.CodePipeline.Model.PipelineDeclaration

$sourceStageAction = New-Object Amazon.CodePipeline.Model.ActionDeclaration
$deployStageAction = New-Object Amazon.CodePipeline.Model.ActionDeclaration

$sourceStageActionOutputArtifact = New-Object Amazon.CodePipeline.Model.OutputArtifact
$sourceStageActionOutputArtifact.Name = "MyApp"

$sourceStageAction.ActionTypeId = @{"Category" = "Source"; "Owner" = "AWS"; "Provider" = "S3"; "Version" = 1}
$sourceStageAction.Configuration.Add("S3Bucket", "amzn-s3-demo-bucket")
$sourceStageAction.Configuration.Add("S3ObjectKey", "my-object-key-name.zip")
$sourceStageAction.OutputArtifacts.Add($sourceStageActionOutputArtifact)
$sourceStageAction.Name = "Source"

$deployStageActionInputArtifact = New-Object Amazon.CodePipeline.Model.InputArtifact
$deployStageActionInputArtifact.Name = "MyApp"

$deployStageAction.ActionTypeId = @{"Category" = "Deploy"; "Owner" = "AWS"; "Provider" = "CodeDeploy"; "Version" = 1}
$deployStageAction.Configuration.Add("ApplicationName", "CodePipelineDemoApplication")
$deployStageAction.Configuration.Add("DeploymentGroupName", "CodePipelineDemoFleet")
$deployStageAction.InputArtifacts.Add($deployStageActionInputArtifact)
$deployStageAction.Name = "CodePipelineDemoFleet"

$sourceStage = New-Object Amazon.CodePipeline.Model.StageDeclaration
$deployStage = New-Object Amazon.CodePipeline.Model.StageDeclaration

$sourceStage.Name = "Source"
$deployStage.Name = "Beta"

$sourceStage.Actions.Add($sourceStageAction)
$deployStage.Actions.Add($deployStageAction)

$pipeline.ArtifactStore = @{"Location" = "amzn-s3-demo-bucket"; "Type" = "S3"}
$pipeline.Name = "CodePipelineDemo"
$pipeline.RoleArn = "arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole"
$pipeline.Stages.Add($sourceStage)
$pipeline.Stages.Add($deployStage)
$pipeline.Version = 1

New-CPPipeline -Pipeline $pipeline

Output:


ArtifactStore : Amazon.CodePipeline.Model.ArtifactStore
Name          : CodePipelineDemo
RoleArn       : arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole
Stages        : {Source, Beta}
Version       : 1

Untuk API detailnya, lihat CreatePipelinedi AWS Tools for PowerShell Referensi Cmdlet.

Contoh kode berikut menunjukkan cara menggunakanRemove-CPCustomActionType.

Alat untuk PowerShell

Contoh 1: Contoh ini menghapus tindakan kustom yang ditentukan. Perintah akan meminta konfirmasi sebelum melanjutkan. Tambahkan parameter -Force untuk menghapus tindakan kustom tanpa prompt.


Remove-CPCustomActionType -Category Build -Provider MyBuildProviderName -Version 1

Untuk API detailnya, lihat DeleteCustomActionTypedi AWS Tools for PowerShell Referensi Cmdlet.

Contoh kode berikut menunjukkan cara menggunakanRemove-CPPipeline.

Alat untuk PowerShell

Contoh 1: Contoh ini menghapus pipeline yang ditentukan. Perintah akan meminta konfirmasi sebelum melanjutkan. Tambahkan parameter -Force untuk menghapus pipeline tanpa prompt.


Remove-CPPipeline -Name CodePipelineDemo

Untuk API detailnya, lihat DeletePipelinedi AWS Tools for PowerShell Referensi Cmdlet.

Contoh kode berikut menunjukkan cara menggunakanStart-CPPipelineExecution.

Alat untuk PowerShell

Contoh 1: Contoh ini mulai menjalankan pipeline yang ditentukan.


Start-CPPipelineExecution -Name CodePipelineDemo

Untuk API detailnya, lihat StartPipelineExecutiondi AWS Tools for PowerShell Referensi Cmdlet.

Contoh kode berikut menunjukkan cara menggunakanUpdate-CPPipeline.

Alat untuk PowerShell

Contoh 1: Contoh ini memperbarui pipeline yang ada yang ditentukan dengan pengaturan yang ditentukan.


$pipeline = New-Object Amazon.CodePipeline.Model.PipelineDeclaration

$sourceStageAction = New-Object Amazon.CodePipeline.Model.ActionDeclaration
$deployStageAction = New-Object Amazon.CodePipeline.Model.ActionDeclaration

$sourceStageActionOutputArtifact = New-Object Amazon.CodePipeline.Model.OutputArtifact
$sourceStageActionOutputArtifact.Name = "MyApp"

$sourceStageAction.ActionTypeId = @{"Category" = "Source"; "Owner" = "AWS"; "Provider" = "S3"; "Version" = 1}
$sourceStageAction.Configuration.Add("S3Bucket", "amzn-s3-demo-bucket")
$sourceStageAction.Configuration.Add("S3ObjectKey", "my-object-key-name.zip")
$sourceStageAction.OutputArtifacts.Add($sourceStageActionOutputArtifact)
$sourceStageAction.Name = "Source"

$deployStageActionInputArtifact = New-Object Amazon.CodePipeline.Model.InputArtifact
$deployStageActionInputArtifact.Name = "MyApp"

$deployStageAction.ActionTypeId = @{"Category" = "Deploy"; "Owner" = "AWS"; "Provider" = "CodeDeploy"; "Version" = 1}
$deployStageAction.Configuration.Add("ApplicationName", "CodePipelineDemoApplication")
$deployStageAction.Configuration.Add("DeploymentGroupName", "CodePipelineDemoFleet")
$deployStageAction.InputArtifacts.Add($deployStageActionInputArtifact)
$deployStageAction.Name = "CodePipelineDemoFleet"

$sourceStage = New-Object Amazon.CodePipeline.Model.StageDeclaration
$deployStage = New-Object Amazon.CodePipeline.Model.StageDeclaration

$sourceStage.Name = "MyInputFiles"
$deployStage.Name = "MyTestDeployment"

$sourceStage.Actions.Add($sourceStageAction)
$deployStage.Actions.Add($deployStageAction)

$pipeline.ArtifactStore = @{"Location" = "amzn-s3-demo-bucket"; "Type" = "S3"}
$pipeline.Name = "CodePipelineDemo"
$pipeline.RoleArn = "arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole"
$pipeline.Stages.Add($sourceStage)
$pipeline.Stages.Add($deployStage)
$pipeline.Version = 1

Update-CPPipeline -Pipeline $pipeline

Output:


ArtifactStore : Amazon.CodePipeline.Model.ArtifactStore
Name          : CodePipelineDemo
RoleArn       : arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole
Stages        : {InputFiles, TestDeployment}
Version       : 2

Untuk API detailnya, lihat UpdatePipelinedi AWS Tools for PowerShell Referensi Cmdlet.

Awas Javascript dinonaktifkan atau tidak tersedia di browser Anda.

Untuk menggunakan Dokumentasi AWS, Javascript harus diaktifkan. Lihat halaman Bantuan browser Anda untuk petunjuk.

Konvensi Dokumen

CodeDeploy

Identitas Amazon Cognito