Tutorial: Installing and configuring the AWS IoT Device Client
This tutorial walks you through the installation and configuration of the AWS IoT Device Client and the creation of AWS IoT resources that you'll use in this and other demos.
To start this tutorial:
-
Have your local host computer and Raspberry Pi from the previous tutorial ready.
This tutorial can take up to 90 minutes to complete.
When you're finished with this topic:
Your IoT device will be ready to use in other AWS IoT Device Client demos.
You'll have provisioned your IoT device in AWS IoT Core.
You'll have downloaded and installed the AWS IoT Device Client on your device.
You'll have saved an image of your device's microSD card that can be used in subsequent tutorials.
Required equipment:
-
Your local development and testing environment from the previous section
-
The Raspberry Pi that you used in the previous section
-
The microSD memory card from the Raspberry Pi that you used in the previous section
Procedures in this tutorial
