Analyze a detector model in AWS IoT Events (AWS CLI)

To analyze a detector model using AWS CLI

1. Run the following command to start an analysis.

   aws iotevents start-detector-model-analysis --cli-input-json file://file-name.json

   Note

   Replace file-name with the name of the file that contains the detector model definition.

   Example Detector model definition

   {
       "detectorModelDefinition": {
           "states": [
               {
                   "stateName": "TemperatureCheck",
                   "onInput": {
                       "events": [
                           {
                               "eventName": "Temperature Received",
                               "condition": "isNull($input.TemperatureInput.sensorData.temperature)==false",
                               "actions": [
                                   {
                                       "iotTopicPublish": {
                                           "mqttTopic": "IoTEvents/Output"
                                       }
                                   }
                               ]
                           }
                       ],
                       "transitionEvents": []
                   },
                   "onEnter": {
                       "events": [
                           {
                               "eventName": "Init",
                               "condition": "true",
                               "actions": [
                                   {
                                       "setVariable": {
                                           "variableName": "temperatureChecked",
                                           "value": "0"
                                       }
                                   }
                               ]
                           }
                       ]
                   },
                   "onExit": {
                       "events": []
                   }
               }
           ],
           "initialStateName": "TemperatureCheck"
       }
   }

   If you use the AWS CLI to analyze an existing detector model, choose one of the following to retrieve the detector model definition:

   • If you want to use the AWS IoT Events console, do the following:

     1. In navigation pane, choose Detector models.

     2. Under Detector models, choose the target detector model.

     3. Choose Export detector model from Action to download the detector model. The detector model is saved in JSON.

     4. Open the detector model JSON file.

     5. You only need the detectorModelDefinition object. Remove the following:

        • The first curly bracket ({) at the top of the page

        • The detectorModel line

        • The detectorModelConfiguration object

        • The last curly bracket (}) at the bottom of the page

     6. Save the file.

   • If you want to use the AWS CLI, do the following:

     1. Run the following command in a terminal.

        aws iotevents describe-detector-model --detector-model-name detector-model-name

     2. Replace detector-model-name with the name of your detector model.

     3. Copy the detectorModelDefinition object to a text editor.

     4. Add curly brackets ({}) outside of the detectorModelDefinition.

     5. Save the file in JSON.

   Example response

   {
       "analysisId": "c1133390-14e3-4204-9a66-31efd92a4fed"
   }

2. Copy the analysis ID from the output.

3. Run the following command to retrieve the status of the analysis.

   aws iotevents describe-detector-model-analysis --analysis-id "analysis-id"

   Note

   Replace analysis-id with the analysis ID that you copied.

   Example response

   {
       "status": "COMPLETE"
   }

   The status can be one of the following values:

   • RUNNING – AWS IoT Events is analyzing your detector model. This process can take up to one minute to complete.

   • COMPLETE – AWS IoT Events finished analyzing your detector model.

   • FAILED – AWS IoT Events couldn't analyze your detector model. Try again later.

4. Run the following command to retrieve one or more analysis results of the detector model.

   Note

   Replace analysis-id with the analysis ID that you copied.

   aws iotevents get-detector-model-analysis-results --analysis-id "analysis-id"

   Example response

   {
       "analysisResults": [
           {
               "type": "data-type",
               "level": "INFO",
               "message": "Inferred data types [Integer] for $variable.temperatureChecked",
               "locations": []
           },
           {
               "type": "referenced-resource",
               "level": "ERROR",
               "message": "Detector Model Definition contains reference to Input 'TemperatureInput' that does not exist.",
               "locations": [
                   {
                       "path": "states[0].onInput.events[0]"
                   }
               ]
           }
       ]
   }