Request Syntax Request Parameters Response Syntax Response Elements Errors Examples See Also

ListTaskDefinitionFamilies

Returns a list of task definition families that are registered to your account. This list includes task definition families that no longer have any ACTIVE task definition revisions.

You can filter out task definition families that don't contain any ACTIVE task definition revisions by setting the status parameter to ACTIVE. You can also filter the results with the familyPrefix parameter.

Request Syntax


{
   "familyPrefix": "string",
   "maxResults": number,
   "nextToken": "string",
   "status": "string"
}

Request Parameters

For information about the parameters that are common to all actions, see Common Parameters.

The request accepts the following data in JSON format.

familyPrefix

The familyPrefix is a string that's used to filter the results of ListTaskDefinitionFamilies. If you specify a familyPrefix, only task definition family names that begin with the familyPrefix string are returned.

Type: String

Required: No

maxResults

The maximum number of task definition family results that ListTaskDefinitionFamilies returned in paginated output. When this parameter is used, ListTaskDefinitions only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another ListTaskDefinitionFamilies request with the returned nextToken value. This value can be between 1 and 100. If this parameter isn't used, then ListTaskDefinitionFamilies returns up to 100 results and a nextToken value if applicable.

Type: Integer

Required: No

nextToken

The nextToken value returned from a ListTaskDefinitionFamilies request indicating that more results are available to fulfill the request and further calls will be needed. If maxResults was provided, it is possible the number of results to be fewer than maxResults.

Note

This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.

Type: String

Required: No

status

The task definition family status to filter the ListTaskDefinitionFamilies results with. By default, both ACTIVE and INACTIVE task definition families are listed. If this parameter is set to ACTIVE, only task definition families that have an ACTIVE task definition revision are returned. If this parameter is set to INACTIVE, only task definition families that do not have any ACTIVE task definition revisions are returned. If you paginate the resulting output, be sure to keep the status value constant in each subsequent request.

Type: String

Valid Values: ACTIVE | INACTIVE | ALL

Required: No

Response Syntax


{
   "families": [ "string" ],
   "nextToken": "string"
}

Response Elements

If the action is successful, the service sends back an HTTP 200 response.

The following data is returned in JSON format by the service.

families

The list of task definition family names that match the ListTaskDefinitionFamilies request.

Type: Array of strings

nextToken

The nextToken value to include in a future ListTaskDefinitionFamilies request. When the results of a ListTaskDefinitionFamilies request exceed maxResults, this value can be used to retrieve the next page of results. This value is null when there are no more results to return.

Type: String

Errors

For information about the errors that are common to all actions, see Common Errors.

ClientException

These errors are usually caused by a client action. This client action might be using an action or resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might be specifying an identifier that isn't valid.

The following list includes additional causes for the error:

The RunTask could not be processed because you use managed scaling and there is a capacity error because the quota of tasks in the PROVISIONING per cluster has been reached. For information about the service quotas, see Amazon ECS service quotas.

HTTP Status Code: 400

InvalidParameterException

The specified parameter isn't valid. Review the available parameters for the API request.

HTTP Status Code: 400

ServerException

These errors are usually caused by a server issue.

HTTP Status Code: 500

Examples

In the following example or examples, the Authorization header contents (AUTHPARAMS) must be replaced with an AWS Signature Version 4 signature. For more information, see Signature Version 4 Signing Process in the AWS General Reference.

You only need to learn how to sign HTTP requests if you intend to create them manually. When you use the AWS Command Line Interface or one of the AWS SDKs to make requests to AWS, these tools automatically sign the requests for you, with the access key that you specify when you configure the tools. When you use these tools, you don't have to sign requests yourself.

Example

This example request lists all of the task definition families in your account in the current Region.

Sample Request


POST / HTTP/1.1
Host: ecs.us-east-1.amazonaws.com
Accept-Encoding: identity
Content-Length: 2
X-Amz-Target: AmazonEC2ContainerServiceV20141113.ListTaskDefinitionFamilies
X-Amz-Date: 20150429T191650Z
Content-Type: application/x-amz-json-1.1
Authorization: AUTHPARAMS

{}

Sample Response


HTTP/1.1 200 OK
Server: Server
Date: Wed, 29 Apr 2015 19:16:51 GMT
Content-Type: application/x-amz-json-1.1
Content-Length: 270
Connection: keep-alive
x-amzn-RequestId: 123a4b56-7c89-01d2-3ef4-example5678f

{
  "families": [
    "console-sample-app",
    "ecs-demo",
    "ecs-private",
    "hello_world",
    "hpcc",
    "hpcc-t2-medium",
    "image-dedupe",
    "node-dedupe",
    "port-mappings",
    "redis-volumes-from",
    "sleep360",
    "terrible-timer",
    "test-volumes-from",
    "tt-empty",
    "tt-empty-2vol",
    "tt-empty-volumes",
    "web-timer"
  ]
}

Example

This example request lists all of the task definition families in your account in the current Region that begin with hpcc.

Sample Request


POST / HTTP/1.1
Host: ecs.us-east-1.amazonaws.com
Accept-Encoding: identity
Content-Length: 24
X-Amz-Target: AmazonEC2ContainerServiceV20141113.ListTaskDefinitionFamilies
X-Amz-Date: 20150429T191825Z
Content-Type: application/x-amz-json-1.1
Authorization: AUTHPARAMS

{
  "familyPrefix": "hpcc"
}

Sample Response


HTTP/1.1 200 OK
Server: Server
Date: Wed, 29 Apr 2015 19:18:25 GMT
Content-Type: application/x-amz-json-1.1
Content-Length: 38
Connection: keep-alive
x-amzn-RequestId: 123a4b56-7c89-01d2-3ef4-example5678f

{
  "families": [
    "hpcc",
    "hpcc-t2-medium"
  ]
}