AWS::Batch::ComputeEnvironment - AWS CloudFormation

AWS::Batch::ComputeEnvironment

The AWS::Batch::ComputeEnvironment resource defines your AWS Batch compute environment. You can define MANAGED or UNMANAGED compute environments. MANAGED compute environments can use Amazon EC2 or AWS Fargate resources. UNMANAGED compute environments can only use EC2 resources. For more information, see Compute Environments in the AWS Batch User Guide .

In a managed compute environment, AWS Batch manages the capacity and instance types of the compute resources within the environment. This is based on the compute resource specification that you define or the launch template that you specify when you create the compute environment. You can choose either to use EC2 On-Demand Instances and EC2 Spot Instances, or to use Fargate and Fargate Spot capacity in your managed compute environment. You can optionally set a maximum price so that Spot Instances only launch when the Spot Instance price is below a specified percentage of the On-Demand price.

Note

Multi-node parallel jobs are not supported on Spot Instances.

In an unmanaged compute environment, you can manage your own EC2 compute resources and have a lot of flexibility with how you configure your compute resources. For example, you can use custom AMI. However, you need to verify that your AMI meets the Amazon ECS container instance AMI specification. For more information, see container instance AMIs in the Amazon Elastic Container Service Developer Guide. After you have created your unmanaged compute environment, you can use the DescribeComputeEnvironments operation to find the Amazon ECS cluster that is associated with it. Then, manually launch your container instances into that Amazon ECS cluster. For more information, see Launching an Amazon ECS container instance in the Amazon Elastic Container Service Developer Guide.

Note

To create a compute environment that uses EKS resources, the caller must have permissions to call eks:DescribeCluster.

Note

AWS Batch doesn't upgrade the AMIs in a compute environment after it's created except under specific conditions. For example, it doesn't automatically update the AMIs when a newer version of the Amazon ECS optimized AMI is available. Therefore, you're responsible for the management of the guest operating system (including updates and security patches) and any additional application software or utilities that you install on the compute resources. There are two ways to use a new AMI for your AWS Batch jobs. The original method is to complete these steps:

  1. Create a new compute environment with the new AMI.

  2. Add the compute environment to an existing job queue.

  3. Remove the earlier compute environment from your job queue.

  4. Delete the earlier compute environment.

In April 2022, AWS Batch added enhanced support for updating compute environments. For example, the UpdateComputeEnvironent API lets you use the ReplaceComputeEnvironment property to dynamically update compute environment parameters such as the launch template or instance type without replacement. For more information, see Updating compute environments in the AWS Batch User Guide.

To use the enhanced updating of compute environments to update AMIs, follow these rules:

  • Either do not set the ServiceRole property or set it to the AWSServiceRoleForBatch service-linked role.

  • Set the AllocationStrategy property to BEST_FIT_PROGRESSIVE or SPOT_CAPACITY_OPTIMIZED.

  • Set the ReplaceComputeEnvironment property to false.

    Important

    Set the ReplaceComputeEnvironment property to true if the compute environment uses the BEST_FIT allocation strategy.

    Note

    If the ReplaceComputeEnvironment property is set to false, you might receive an error message when you update the CFN template for a compute environment. This issue occurs if the updated desiredvcpus value is less than the current desiredvcpus value. As a workaround, delete the desiredvcpus value from the updated template or use the minvcpus property to manage the number of vCPUs. For information, see Error message when you update the DesiredvCpus setting.

  • Set the UpdateToLatestImageVersion property to true. This property is used when you update a compute environment. The UpdateToLatestImageVersion property is ignored when you create a compute environment.

  • Either do not specify an image ID in ImageId or ImageIdOverride properties, or in the launch template identified by the Launch Template property. In that case AWS Batch will select the latest Amazon ECS optimized AMI supported by AWS Batch at the time the infrastructure update is initiated. Alternatively you can specify the AMI ID in the ImageId or ImageIdOverride properties, or the launch template identified by the LaunchTemplate properties. Changing any of these properties will trigger an infrastructure update.

If these rules are followed, any update that triggers an infrastructure update will cause the AMI ID to be re-selected. If the Version property of the LaunchTemplateSpecification is set to $Latest or $Default, the latest or default version of the launch template will be evaluated up at the time of the infrastructure update, even if the LaunchTemplateSpecification was not updated.

Syntax

To declare this entity in your AWS CloudFormation template, use the following syntax:

JSON

{ "Type" : "AWS::Batch::ComputeEnvironment", "Properties" : { "ComputeEnvironmentName" : String, "ComputeResources" : ComputeResources, "Context" : String, "EksConfiguration" : EksConfiguration, "ReplaceComputeEnvironment" : Boolean, "ServiceRole" : String, "State" : String, "Tags" : {Key: Value, ...}, "Type" : String, "UnmanagedvCpus" : Integer, "UpdatePolicy" : UpdatePolicy } }

YAML

Type: AWS::Batch::ComputeEnvironment Properties: ComputeEnvironmentName: String ComputeResources: ComputeResources Context: String EksConfiguration: EksConfiguration ReplaceComputeEnvironment: Boolean ServiceRole: String State: String Tags: Key: Value Type: String UnmanagedvCpus: Integer UpdatePolicy: UpdatePolicy

Properties

ComputeEnvironmentName

The name for your compute environment. It can be up to 128 characters long. It can contain uppercase and lowercase letters, numbers, hyphens (-), and underscores (_).

Required: No

Type: String

Update requires: Replacement

ComputeResources

The ComputeResources property type specifies details of the compute resources managed by the compute environment. This parameter is required for managed compute environments. For more information, see Compute Environments in the AWS Batch User Guide .

Required: No

Type: ComputeResources

Update requires: No interruption

Context

Reserved.

Required: No

Type: String

Update requires: No interruption

EksConfiguration

The details for the Amazon EKS cluster that supports the compute environment.

Required: No

Type: EksConfiguration

Update requires: Replacement

ReplaceComputeEnvironment

Specifies whether the compute environment is replaced if an update is made that requires replacing the instances in the compute environment. The default value is true. To enable more properties to be updated, set this property to false. When changing the value of this property to false, do not change any other properties at the same time. If other properties are changed at the same time, and the change needs to be rolled back but it can't, it's possible for the stack to go into the UPDATE_ROLLBACK_FAILED state. You can't update a stack that is in the UPDATE_ROLLBACK_FAILED state. However, if you can continue to roll it back, you can return the stack to its original settings and then try to update it again. For more information, see Continue rolling back an update in the AWS CloudFormation User Guide.

The properties that can't be changed without replacing the compute environment are in the ComputeResources property type: AllocationStrategy, BidPercentage, Ec2Configuration, Ec2KeyPair, Ec2KeyPair, ImageId, InstanceRole, InstanceTypes, LaunchTemplate, MaxvCpus, MinvCpus, PlacementGroup, SecurityGroupIds, Subnets, Tags, Type, and UpdateToLatestImageVersion.

Required: No

Type: Boolean

Update requires: No interruption

ServiceRole

The full Amazon Resource Name (ARN) of the IAM role that allows AWS Batch to make calls to other AWS services on your behalf. For more information, see AWS Batch service IAM role in the AWS Batch User Guide.

Important

If your account already created the AWS Batch service-linked role, that role is used by default for your compute environment unless you specify a different role here. If the AWS Batch service-linked role doesn't exist in your account, and no role is specified here, the service attempts to create the AWS Batch service-linked role in your account.

If your specified role has a path other than /, then you must specify either the full role ARN (recommended) or prefix the role name with the path. For example, if a role with the name bar has a path of /foo/, specify /foo/bar as the role name. For more information, see Friendly names and paths in the IAM User Guide.

Note

Depending on how you created your AWS Batch service role, its ARN might contain the service-role path prefix. When you only specify the name of the service role, AWS Batch assumes that your ARN doesn't use the service-role path prefix. Because of this, we recommend that you specify the full ARN of your service role when you create compute environments.

Required: No

Type: String

Update requires: No interruption

State

The state of the compute environment. If the state is ENABLED, then the compute environment accepts jobs from a queue and can scale out automatically based on queues.

If the state is ENABLED, then the AWS Batch scheduler can attempt to place jobs from an associated job queue on the compute resources within the environment. If the compute environment is managed, then it can scale its instances out or in automatically, based on the job queue demand.

If the state is DISABLED, then the AWS Batch scheduler doesn't attempt to place jobs within the environment. Jobs in a STARTING or RUNNING state continue to progress normally. Managed compute environments in the DISABLED state don't scale out.

Note

Compute environments in a DISABLED state may continue to incur billing charges. To prevent additional charges, turn off and then delete the compute environment. For more information, see State in the AWS Batch User Guide.

When an instance is idle, the instance scales down to the minvCpus value. However, the instance size doesn't change. For example, consider a c5.8xlarge instance with a minvCpus value of 4 and a desiredvCpus value of 36. This instance doesn't scale down to a c5.large instance.

Required: No

Type: String

Allowed values: ENABLED | DISABLED

Update requires: No interruption

Tags

The tags applied to the compute environment.

Required: No

Type: Object of String

Pattern: .*

Update requires: Replacement

Type

The type of the compute environment: MANAGED or UNMANAGED. For more information, see Compute Environments in the AWS Batch User Guide.

Required: Yes

Type: String

Allowed values: MANAGED | UNMANAGED

Update requires: Replacement

UnmanagedvCpus

The maximum number of vCPUs for an unmanaged compute environment. This parameter is only used for fair share scheduling to reserve vCPU capacity for new share identifiers. If this parameter isn't provided for a fair share job queue, no vCPU capacity is reserved.

Note

This parameter is only supported when the type parameter is set to UNMANAGED.

Required: No

Type: Integer

Update requires: No interruption

UpdatePolicy

Specifies the infrastructure update policy for the compute environment. For more information about infrastructure updates, see Updating compute environments in the AWS Batch User Guide.

Required: No

Type: UpdatePolicy

Update requires: No interruption

Return values

Ref

When you pass the logical ID of this resource to the intrinsic Ref function, Ref returns the compute environment ARN, such as arn:aws:batch:us-east-1:555555555555:compute-environment/M4OnDemand .

For more information about using the Ref function, see Ref.

Fn::GetAtt

The Fn::GetAtt intrinsic function returns a value for a specified attribute of this type. The following are the available attributes and sample return values.

For more information about using the Fn::GetAtt intrinsic function, see Fn::GetAtt.

ComputeEnvironmentArn

Returns the compute environment ARN, such as arn:aws:batch:us-east-1:111122223333:compute-environment/ComputeEnvironmentName .

Examples

Managed Compute Environment

The following example creates a managed compute environment called C4OnDemand that uses C4 On-Demand instances and a custom AMI.

JSON

{ "ComputeEnvironment": { "Type": "AWS::Batch::ComputeEnvironment", "Properties": { "Type": "MANAGED", "arn:aws:iam::111122223333:role/aws-service-role/batch.amazonaws.com/AWSServiceRoleForBatch", "ComputeEnvironmentName": "C4OnDemand", "ComputeResources": { "MaxvCpus": 128, "SecurityGroupIds": [ "sg-abcd1234" ], "Type": "EC2", "Subnets": [ "subnet-aaaaaaaa", "subnet-bbbbbbbb", "subnet-cccccccc" ], "MinvCpus": 0, "ImageId": "ami-a1b2c3d4", "InstanceRole": "ecsInstanceRole", "InstanceTypes": [ "c4.large", "c4.xlarge", "c4.2xlarge", "c4.4xlarge", "c4.8xlarge" ], "Ec2KeyPair": "id_rsa", "Tags": { "Name": "Batch Instance - C4OnDemand" }, "DesiredvCpus": 48 }, "State": "ENABLED" } } }

YAML

ComputeEnvironment: Type: 'AWS::Batch::ComputeEnvironment' Properties: Type: MANAGED ServiceRole: - arn:aws:iam::111122223333:role/aws-service-role/batch.amazonaws.com/AWSServiceRoleForBatch ComputeEnvironmentName: C4OnDemand ComputeResources: MaxvCpus: 128 SecurityGroupIds: - sg-abcd1234 Type: EC2 Subnets: - subnet-aaaaaaaa - subnet-bbbbbbbb - subnet-cccccccc MinvCpus: 0 ImageId: ami-a1b2c3d4 InstanceRole: ecsInstanceRole InstanceTypes: - c4.large - c4.xlarge - c4.2xlarge - c4.4xlarge - c4.8xlarge Ec2KeyPair: id_rsa Tags: Name: Batch Instance - C4OnDemand DesiredvCpus: 48 State: ENABLED

See also