Doc AWS SDK 예제 GitHub 리포지토리에서 더 많은 SDK 예제를 사용할 수 있습니다. [AWS](https://github.com/awsdocs/aws-doc-sdk-examples) 

기계 번역으로 제공되는 번역입니다. 제공된 번역과 원본 영어의 내용이 상충하는 경우에는 영어 버전이 우선합니다.

# SDK for Go V2를 사용한 DynamoDB 예제
<a name="go_2_dynamodb_code_examples"></a>

다음 코드 예제에서는 DynamoDB와 함께 AWS SDK for Go V2를 사용하여 작업을 수행하고 일반적인 시나리오를 구현하는 방법을 보여줍니다.

*기본 사항*은 서비스 내에서 필수 작업을 수행하는 방법을 보여주는 코드 예제입니다.

*작업*은 대규모 프로그램에서 발췌한 코드이며 컨텍스트에 맞춰 실행해야 합니다. 작업은 개별 서비스 함수를 직접 호출하는 방법을 보여주며, 관련 시나리오의 컨텍스트에 맞는 작업을 볼 수 있습니다.

*시나리오*는 동일한 서비스 내에서 또는 다른 AWS 서비스와 결합된 상태에서 여러 함수를 직접적으로 호출하여 특정 태스크를 수행하는 방법을 보여주는 코드 예제입니다.

*AWS 커뮤니티 기여*는 여러 팀이 생성하고 유지 관리하는 예입니다 AWS. 피드백을 제공하려면 연결된 리포지토리에 제공된 메커니즘을 사용합니다.

각 예시에는 전체 소스 코드에 대한 링크가 포함되어 있으며, 여기에서 컨텍스트에 맞춰 코드를 설정하고 실행하는 방법에 대한 지침을 찾을 수 있습니다.

**Topics**
+ [기본 사항](#basics)
+ [작업](#actions)
+ [시나리오](#scenarios)
+ [서버리스 예제](#serverless_examples)
+ [AWS 커뮤니티 기여](#aws_community_contributions)

## 기본 사항
<a name="basics"></a>

### 기본 사항 알아보기
<a name="dynamodb_Scenario_GettingStartedMovies_go_2_topic"></a>

다음 코드 예제에서는 다음과 같은 작업을 수행하는 방법을 보여줍니다.
+ 영화 데이터를 저장할 수 있는 테이블을 생성합니다.
+ 테이블에 하나의 영화를 추가하고 가져오고 업데이트합니다.
+ 샘플 JSON 파일에서 테이블에 영화 데이터를 씁니다.
+ 특정 연도에 개봉된 영화를 쿼리합니다.
+ 특정 연도 범위 동안 개봉된 영화를 스캔합니다.
+ 테이블에서 영화를 삭제한 다음, 테이블을 삭제합니다.

**SDK for Go V2**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/gov2/dynamodb#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.
대화식 시나리오를 실행하여 테이블을 생성하고 테이블에 대한 작업을 수행합니다.  

```
import (
	"context"
	"fmt"
	"log"
	"strings"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb"
	"github.com/awsdocs/aws-doc-sdk-examples/gov2/demotools"
	"github.com/awsdocs/aws-doc-sdk-examples/gov2/dynamodb/actions"
)

// RunMovieScenario is an interactive example that shows you how to use the AWS SDK for Go
// to create and use an Amazon DynamoDB table that stores data about movies.
//
//  1. Create a table that can hold movie data.
//  2. Put, get, and update a single movie in the table.
//  3. Write movie data to the table from a sample JSON file.
//  4. Query for movies that were released in a given year.
//  5. Scan for movies that were released in a range of years.
//  6. Delete a movie from the table.
//  7. Delete the table.
//
// This example creates a DynamoDB service client from the specified sdkConfig so that
// you can replace it with a mocked or stubbed config for unit testing.
//
// It uses a questioner from the `demotools` package to get input during the example.
// This package can be found in the ..\..\demotools folder of this repo.
//
// The specified movie sampler is used to get sample data from a URL that is loaded
// into the named table.
func RunMovieScenario(
	ctx context.Context, sdkConfig aws.Config, questioner demotools.IQuestioner, tableName string,
	movieSampler actions.IMovieSampler) {
	defer func() {
		if r := recover(); r != nil {
			fmt.Printf("Something went wrong with the demo.")
		}
	}()

	log.Println(strings.Repeat("-", 88))
	log.Println("Welcome to the Amazon DynamoDB getting started demo.")
	log.Println(strings.Repeat("-", 88))

	tableBasics := actions.TableBasics{TableName: tableName,
		DynamoDbClient: dynamodb.NewFromConfig(sdkConfig)}

	exists, err := tableBasics.TableExists(ctx)
	if err != nil {
		panic(err)
	}
	if !exists {
		log.Printf("Creating table %v...\n", tableName)
		_, err = tableBasics.CreateMovieTable(ctx)
		if err != nil {
			panic(err)
		} else {
			log.Printf("Created table %v.\n", tableName)
		}
	} else {
		log.Printf("Table %v already exists.\n", tableName)
	}

	var customMovie actions.Movie
	customMovie.Title = questioner.Ask("Enter a movie title to add to the table:",
		demotools.NotEmpty{})
	customMovie.Year = questioner.AskInt("What year was it released?",
		demotools.NotEmpty{}, demotools.InIntRange{Lower: 1900, Upper: 2030})
	customMovie.Info = map[string]interface{}{}
	customMovie.Info["rating"] = questioner.AskFloat64(
		"Enter a rating between 1 and 10:",
		demotools.NotEmpty{}, demotools.InFloatRange{Lower: 1, Upper: 10})
	customMovie.Info["plot"] = questioner.Ask("What's the plot? ",
		demotools.NotEmpty{})
	err = tableBasics.AddMovie(ctx, customMovie)
	if err == nil {
		log.Printf("Added %v to the movie table.\n", customMovie.Title)
	}
	log.Println(strings.Repeat("-", 88))

	log.Printf("Let's update your movie. You previously rated it %v.\n", customMovie.Info["rating"])
	customMovie.Info["rating"] = questioner.AskFloat64(
		"What new rating would you give it?",
		demotools.NotEmpty{}, demotools.InFloatRange{Lower: 1, Upper: 10})
	log.Printf("You summarized the plot as '%v'.\n", customMovie.Info["plot"])
	customMovie.Info["plot"] = questioner.Ask("What would you say now?",
		demotools.NotEmpty{})
	attributes, err := tableBasics.UpdateMovie(ctx, customMovie)
	if err == nil {
		log.Printf("Updated %v with new values.\n", customMovie.Title)
		for _, attVal := range attributes {
			for valKey, val := range attVal {
				log.Printf("\t%v: %v\n", valKey, val)
			}
		}
	}
	log.Println(strings.Repeat("-", 88))

	log.Printf("Getting movie data from %v and adding 250 movies to the table...\n",
		movieSampler.GetURL())
	movies := movieSampler.GetSampleMovies()
	written, err := tableBasics.AddMovieBatch(ctx, movies, 250)
	if err != nil {
		panic(err)
	} else {
		log.Printf("Added %v movies to the table.\n", written)
	}

	show := 10
	if show > written {
		show = written
	}
	log.Printf("The first %v movies in the table are:", show)
	for index, movie := range movies[:show] {
		log.Printf("\t%v. %v\n", index+1, movie.Title)
	}
	movieIndex := questioner.AskInt(
		"Enter the number of a movie to get info about it: ",
		demotools.InIntRange{Lower: 1, Upper: show},
	)
	movie, err := tableBasics.GetMovie(ctx, movies[movieIndex-1].Title, movies[movieIndex-1].Year)
	if err == nil {
		log.Println(movie)
	}
	log.Println(strings.Repeat("-", 88))

	log.Println("Let's get a list of movies released in a given year.")
	releaseYear := questioner.AskInt("Enter a year between 1972 and 2018: ",
		demotools.InIntRange{Lower: 1972, Upper: 2018},
	)
	releases, err := tableBasics.Query(ctx, releaseYear)
	if err == nil {
		if len(releases) == 0 {
			log.Printf("I couldn't find any movies released in %v!\n", releaseYear)
		} else {
			for _, movie = range releases {
				log.Println(movie)
			}
		}
	}
	log.Println(strings.Repeat("-", 88))

	log.Println("Now let's scan for movies released in a range of years.")
	startYear := questioner.AskInt("Enter a year: ",
		demotools.InIntRange{Lower: 1972, Upper: 2018})
	endYear := questioner.AskInt("Enter another year: ",
		demotools.InIntRange{Lower: 1972, Upper: 2018})
	releases, err = tableBasics.Scan(ctx, startYear, endYear)
	if err == nil {
		if len(releases) == 0 {
			log.Printf("I couldn't find any movies released between %v and %v!\n", startYear, endYear)
		} else {
			log.Printf("Found %v movies. In this list, the plot is <nil> because "+
				"we used a projection expression when scanning for items to return only "+
				"the title, year, and rating.\n", len(releases))
			for _, movie = range releases {
				log.Println(movie)
			}
		}
	}
	log.Println(strings.Repeat("-", 88))

	var tables []string
	if questioner.AskBool("Do you want to list all of your tables? (y/n) ", "y") {
		tables, err = tableBasics.ListTables(ctx)
		if err == nil {
			log.Printf("Found %v tables:", len(tables))
			for _, table := range tables {
				log.Printf("\t%v", table)
			}
		}
	}
	log.Println(strings.Repeat("-", 88))

	log.Printf("Let's remove your movie '%v'.\n", customMovie.Title)
	if questioner.AskBool("Do you want to delete it from the table? (y/n) ", "y") {
		err = tableBasics.DeleteMovie(ctx, customMovie)
	}
	if err == nil {
		log.Printf("Deleted %v.\n", customMovie.Title)
	}

	if questioner.AskBool("Delete the table, too? (y/n)", "y") {
		err = tableBasics.DeleteTable(ctx)
	} else {
		log.Println("Don't forget to delete the table when you're done or you might " +
			"incur charges on your account.")
	}
	if err == nil {
		log.Printf("Deleted table %v.\n", tableBasics.TableName)
	}

	log.Println(strings.Repeat("-", 88))
	log.Println("Thanks for watching!")
	log.Println(strings.Repeat("-", 88))
}
```
이 예시에서 사용되는 Movie 구조체를 정의합니다.  

```
import (
	"archive/zip"
	"bytes"
	"encoding/json"
	"fmt"
	"io"
	"log"
	"net/http"

	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// Movie encapsulates data about a movie. Title and Year are the composite primary key
// of the movie in Amazon DynamoDB. Title is the sort key, Year is the partition key,
// and Info is additional data.
type Movie struct {
	Title string                 `dynamodbav:"title"`
	Year  int                    `dynamodbav:"year"`
	Info  map[string]interface{} `dynamodbav:"info"`
}

// GetKey returns the composite primary key of the movie in a format that can be
// sent to DynamoDB.
func (movie Movie) GetKey() map[string]types.AttributeValue {
	title, err := attributevalue.Marshal(movie.Title)
	if err != nil {
		panic(err)
	}
	year, err := attributevalue.Marshal(movie.Year)
	if err != nil {
		panic(err)
	}
	return map[string]types.AttributeValue{"title": title, "year": year}
}

// String returns the title, year, rating, and plot of a movie, formatted for the example.
func (movie Movie) String() string {
	return fmt.Sprintf("%v\n\tReleased: %v\n\tRating: %v\n\tPlot: %v\n",
		movie.Title, movie.Year, movie.Info["rating"], movie.Info["plot"])
}
```
DynamoDB 작업을 호출하는 구문과 메서드를 생성합니다.  

```
import (
	"context"
	"errors"
	"log"
	"time"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/expression"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// TableBasics encapsulates the Amazon DynamoDB service actions used in the examples.
// It contains a DynamoDB service client that is used to act on the specified table.
type TableBasics struct {
	DynamoDbClient *dynamodb.Client
	TableName      string
}



// TableExists determines whether a DynamoDB table exists.
func (basics TableBasics) TableExists(ctx context.Context) (bool, error) {
	exists := true
	_, err := basics.DynamoDbClient.DescribeTable(
		ctx, &dynamodb.DescribeTableInput{TableName: aws.String(basics.TableName)},
	)
	if err != nil {
		var notFoundEx *types.ResourceNotFoundException
		if errors.As(err, &notFoundEx) {
			log.Printf("Table %v does not exist.\n", basics.TableName)
			err = nil
		} else {
			log.Printf("Couldn't determine existence of table %v. Here's why: %v\n", basics.TableName, err)
		}
		exists = false
	}
	return exists, err
}



// CreateMovieTable creates a DynamoDB table with a composite primary key defined as
// a string sort key named `title`, and a numeric partition key named `year`.
// This function uses NewTableExistsWaiter to wait for the table to be created by
// DynamoDB before it returns.
func (basics TableBasics) CreateMovieTable(ctx context.Context) (*types.TableDescription, error) {
	var tableDesc *types.TableDescription
	table, err := basics.DynamoDbClient.CreateTable(ctx, &dynamodb.CreateTableInput{
		AttributeDefinitions: []types.AttributeDefinition{{
			AttributeName: aws.String("year"),
			AttributeType: types.ScalarAttributeTypeN,
		}, {
			AttributeName: aws.String("title"),
			AttributeType: types.ScalarAttributeTypeS,
		}},
		KeySchema: []types.KeySchemaElement{{
			AttributeName: aws.String("year"),
			KeyType:       types.KeyTypeHash,
		}, {
			AttributeName: aws.String("title"),
			KeyType:       types.KeyTypeRange,
		}},
		TableName:   aws.String(basics.TableName),
		BillingMode: types.BillingModePayPerRequest,
	})
	if err != nil {
		log.Printf("Couldn't create table %v. Here's why: %v\n", basics.TableName, err)
	} else {
		waiter := dynamodb.NewTableExistsWaiter(basics.DynamoDbClient)
		err = waiter.Wait(ctx, &dynamodb.DescribeTableInput{
			TableName: aws.String(basics.TableName)}, 5*time.Minute)
		if err != nil {
			log.Printf("Wait for table exists failed. Here's why: %v\n", err)
		}
		tableDesc = table.TableDescription
		log.Printf("Ccreating table test")
	}
	return tableDesc, err
}



// ListTables lists the DynamoDB table names for the current account.
func (basics TableBasics) ListTables(ctx context.Context) ([]string, error) {
	var tableNames []string
	var output *dynamodb.ListTablesOutput
	var err error
	tablePaginator := dynamodb.NewListTablesPaginator(basics.DynamoDbClient, &dynamodb.ListTablesInput{})
	for tablePaginator.HasMorePages() {
		output, err = tablePaginator.NextPage(ctx)
		if err != nil {
			log.Printf("Couldn't list tables. Here's why: %v\n", err)
			break
		} else {
			tableNames = append(tableNames, output.TableNames...)
		}
	}
	return tableNames, err
}



// AddMovie adds a movie the DynamoDB table.
func (basics TableBasics) AddMovie(ctx context.Context, movie Movie) error {
	item, err := attributevalue.MarshalMap(movie)
	if err != nil {
		panic(err)
	}
	_, err = basics.DynamoDbClient.PutItem(ctx, &dynamodb.PutItemInput{
		TableName: aws.String(basics.TableName), Item: item,
	})
	if err != nil {
		log.Printf("Couldn't add item to table. Here's why: %v\n", err)
	}
	return err
}



// UpdateMovie updates the rating and plot of a movie that already exists in the
// DynamoDB table. This function uses the `expression` package to build the update
// expression.
func (basics TableBasics) UpdateMovie(ctx context.Context, movie Movie) (map[string]map[string]interface{}, error) {
	var err error
	var response *dynamodb.UpdateItemOutput
	var attributeMap map[string]map[string]interface{}
	update := expression.Set(expression.Name("info.rating"), expression.Value(movie.Info["rating"]))
	update.Set(expression.Name("info.plot"), expression.Value(movie.Info["plot"]))
	expr, err := expression.NewBuilder().WithUpdate(update).Build()
	if err != nil {
		log.Printf("Couldn't build expression for update. Here's why: %v\n", err)
	} else {
		response, err = basics.DynamoDbClient.UpdateItem(ctx, &dynamodb.UpdateItemInput{
			TableName:                 aws.String(basics.TableName),
			Key:                       movie.GetKey(),
			ExpressionAttributeNames:  expr.Names(),
			ExpressionAttributeValues: expr.Values(),
			UpdateExpression:          expr.Update(),
			ReturnValues:              types.ReturnValueUpdatedNew,
		})
		if err != nil {
			log.Printf("Couldn't update movie %v. Here's why: %v\n", movie.Title, err)
		} else {
			err = attributevalue.UnmarshalMap(response.Attributes, &attributeMap)
			if err != nil {
				log.Printf("Couldn't unmarshall update response. Here's why: %v\n", err)
			}
		}
	}
	return attributeMap, err
}



// AddMovieBatch adds a slice of movies to the DynamoDB table. The function sends
// batches of 25 movies to DynamoDB until all movies are added or it reaches the
// specified maximum.
func (basics TableBasics) AddMovieBatch(ctx context.Context, movies []Movie, maxMovies int) (int, error) {
	var err error
	var item map[string]types.AttributeValue
	written := 0
	batchSize := 25 // DynamoDB allows a maximum batch size of 25 items.
	start := 0
	end := start + batchSize
	for start < maxMovies && start < len(movies) {
		var writeReqs []types.WriteRequest
		if end > len(movies) {
			end = len(movies)
		}
		for _, movie := range movies[start:end] {
			item, err = attributevalue.MarshalMap(movie)
			if err != nil {
				log.Printf("Couldn't marshal movie %v for batch writing. Here's why: %v\n", movie.Title, err)
			} else {
				writeReqs = append(
					writeReqs,
					types.WriteRequest{PutRequest: &types.PutRequest{Item: item}},
				)
			}
		}
		_, err = basics.DynamoDbClient.BatchWriteItem(ctx, &dynamodb.BatchWriteItemInput{
			RequestItems: map[string][]types.WriteRequest{basics.TableName: writeReqs}})
		if err != nil {
			log.Printf("Couldn't add a batch of movies to %v. Here's why: %v\n", basics.TableName, err)
		} else {
			written += len(writeReqs)
		}
		start = end
		end += batchSize
	}

	return written, err
}



// GetMovie gets movie data from the DynamoDB table by using the primary composite key
// made of title and year.
func (basics TableBasics) GetMovie(ctx context.Context, title string, year int) (Movie, error) {
	movie := Movie{Title: title, Year: year}
	response, err := basics.DynamoDbClient.GetItem(ctx, &dynamodb.GetItemInput{
		Key: movie.GetKey(), TableName: aws.String(basics.TableName),
	})
	if err != nil {
		log.Printf("Couldn't get info about %v. Here's why: %v\n", title, err)
	} else {
		err = attributevalue.UnmarshalMap(response.Item, &movie)
		if err != nil {
			log.Printf("Couldn't unmarshal response. Here's why: %v\n", err)
		}
	}
	return movie, err
}



// Query gets all movies in the DynamoDB table that were released in the specified year.
// The function uses the `expression` package to build the key condition expression
// that is used in the query.
func (basics TableBasics) Query(ctx context.Context, releaseYear int) ([]Movie, error) {
	var err error
	var response *dynamodb.QueryOutput
	var movies []Movie
	keyEx := expression.Key("year").Equal(expression.Value(releaseYear))
	expr, err := expression.NewBuilder().WithKeyCondition(keyEx).Build()
	if err != nil {
		log.Printf("Couldn't build expression for query. Here's why: %v\n", err)
	} else {
		queryPaginator := dynamodb.NewQueryPaginator(basics.DynamoDbClient, &dynamodb.QueryInput{
			TableName:                 aws.String(basics.TableName),
			ExpressionAttributeNames:  expr.Names(),
			ExpressionAttributeValues: expr.Values(),
			KeyConditionExpression:    expr.KeyCondition(),
		})
		for queryPaginator.HasMorePages() {
			response, err = queryPaginator.NextPage(ctx)
			if err != nil {
				log.Printf("Couldn't query for movies released in %v. Here's why: %v\n", releaseYear, err)
				break
			} else {
				var moviePage []Movie
				err = attributevalue.UnmarshalListOfMaps(response.Items, &moviePage)
				if err != nil {
					log.Printf("Couldn't unmarshal query response. Here's why: %v\n", err)
					break
				} else {
					movies = append(movies, moviePage...)
				}
			}
		}
	}
	return movies, err
}



// Scan gets all movies in the DynamoDB table that were released in a range of years
// and projects them to return a reduced set of fields.
// The function uses the `expression` package to build the filter and projection
// expressions.
func (basics TableBasics) Scan(ctx context.Context, startYear int, endYear int) ([]Movie, error) {
	var movies []Movie
	var err error
	var response *dynamodb.ScanOutput
	filtEx := expression.Name("year").Between(expression.Value(startYear), expression.Value(endYear))
	projEx := expression.NamesList(
		expression.Name("year"), expression.Name("title"), expression.Name("info.rating"))
	expr, err := expression.NewBuilder().WithFilter(filtEx).WithProjection(projEx).Build()
	if err != nil {
		log.Printf("Couldn't build expressions for scan. Here's why: %v\n", err)
	} else {
		scanPaginator := dynamodb.NewScanPaginator(basics.DynamoDbClient, &dynamodb.ScanInput{
			TableName:                 aws.String(basics.TableName),
			ExpressionAttributeNames:  expr.Names(),
			ExpressionAttributeValues: expr.Values(),
			FilterExpression:          expr.Filter(),
			ProjectionExpression:      expr.Projection(),
		})
		for scanPaginator.HasMorePages() {
			response, err = scanPaginator.NextPage(ctx)
			if err != nil {
				log.Printf("Couldn't scan for movies released between %v and %v. Here's why: %v\n",
					startYear, endYear, err)
				break
			} else {
				var moviePage []Movie
				err = attributevalue.UnmarshalListOfMaps(response.Items, &moviePage)
				if err != nil {
					log.Printf("Couldn't unmarshal query response. Here's why: %v\n", err)
					break
				} else {
					movies = append(movies, moviePage...)
				}
			}
		}
	}
	return movies, err
}



// DeleteMovie removes a movie from the DynamoDB table.
func (basics TableBasics) DeleteMovie(ctx context.Context, movie Movie) error {
	_, err := basics.DynamoDbClient.DeleteItem(ctx, &dynamodb.DeleteItemInput{
		TableName: aws.String(basics.TableName), Key: movie.GetKey(),
	})
	if err != nil {
		log.Printf("Couldn't delete %v from the table. Here's why: %v\n", movie.Title, err)
	}
	return err
}



// DeleteTable deletes the DynamoDB table and all of its data.
func (basics TableBasics) DeleteTable(ctx context.Context) error {
	_, err := basics.DynamoDbClient.DeleteTable(ctx, &dynamodb.DeleteTableInput{
		TableName: aws.String(basics.TableName)})
	if err != nil {
		log.Printf("Couldn't delete table %v. Here's why: %v\n", basics.TableName, err)
	}
	return err
}
```
+ API 세부 정보는 *AWS SDK for Go API 참조*의 다음 주제를 참조하세요.
  + [BatchWriteItem](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.BatchWriteItem)
  + [CreateTable](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.CreateTable)
  + [DeleteItem](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.DeleteItem)
  + [DeleteTable](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.DeleteTable)
  + [DescribeTable](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.DescribeTable)
  + [GetItem](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.GetItem)
  + [PutItem](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.PutItem)
  + [Query](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.Query)
  + [Scan](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.Scan)
  + [UpdateItem](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.UpdateItem)

## 작업
<a name="actions"></a>

### `BatchExecuteStatement`
<a name="dynamodb_BatchExecuteStatement_go_2_topic"></a>

다음 코드 예시는 `BatchExecuteStatement`의 사용 방법을 보여줍니다.

**SDK for Go V2**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/gov2/dynamodb#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.
예제를 위한 함수 수신기 구문을 정의합니다.  

```
import (
	"context"
	"fmt"
	"log"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// PartiQLRunner encapsulates the Amazon DynamoDB service actions used in the
// PartiQL examples. It contains a DynamoDB service client that is used to act on the
// specified table.
type PartiQLRunner struct {
	DynamoDbClient *dynamodb.Client
	TableName      string
}
```
INSERT 문 배치를 사용하여 항목을 추가합니다.  

```
// AddMovieBatch runs a batch of PartiQL INSERT statements to add multiple movies to the
// DynamoDB table.
func (runner PartiQLRunner) AddMovieBatch(ctx context.Context, movies []Movie) error {
	statementRequests := make([]types.BatchStatementRequest, len(movies))
	for index, movie := range movies {
		params, err := attributevalue.MarshalList([]interface{}{movie.Title, movie.Year, movie.Info})
		if err != nil {
			panic(err)
		}
		statementRequests[index] = types.BatchStatementRequest{
			Statement: aws.String(fmt.Sprintf(
				"INSERT INTO \"%v\" VALUE {'title': ?, 'year': ?, 'info': ?}", runner.TableName)),
			Parameters: params,
		}
	}

	_, err := runner.DynamoDbClient.BatchExecuteStatement(ctx, &dynamodb.BatchExecuteStatementInput{
		Statements: statementRequests,
	})
	if err != nil {
		log.Printf("Couldn't insert a batch of items with PartiQL. Here's why: %v\n", err)
	}
	return err
}
```
SELECT 문 배치를 사용하여 항목을 가져옵니다.  

```
// GetMovieBatch runs a batch of PartiQL SELECT statements to get multiple movies from
// the DynamoDB table by title and year.
func (runner PartiQLRunner) GetMovieBatch(ctx context.Context, movies []Movie) ([]Movie, error) {
	statementRequests := make([]types.BatchStatementRequest, len(movies))
	for index, movie := range movies {
		params, err := attributevalue.MarshalList([]interface{}{movie.Title, movie.Year})
		if err != nil {
			panic(err)
		}
		statementRequests[index] = types.BatchStatementRequest{
			Statement: aws.String(
				fmt.Sprintf("SELECT * FROM \"%v\" WHERE title=? AND year=?", runner.TableName)),
			Parameters: params,
		}
	}

	output, err := runner.DynamoDbClient.BatchExecuteStatement(ctx, &dynamodb.BatchExecuteStatementInput{
		Statements: statementRequests,
	})
	var outMovies []Movie
	if err != nil {
		log.Printf("Couldn't get a batch of items with PartiQL. Here's why: %v\n", err)
	} else {
		for _, response := range output.Responses {
			var movie Movie
			err = attributevalue.UnmarshalMap(response.Item, &movie)
			if err != nil {
				log.Printf("Couldn't unmarshal response. Here's why: %v\n", err)
			} else {
				outMovies = append(outMovies, movie)
			}
		}
	}
	return outMovies, err
}
```
UPDATE 문 배치를 사용하여 항목을 업데이트합니다.  

```
// UpdateMovieBatch runs a batch of PartiQL UPDATE statements to update the rating of
// multiple movies that already exist in the DynamoDB table.
func (runner PartiQLRunner) UpdateMovieBatch(ctx context.Context, movies []Movie, ratings []float64) error {
	statementRequests := make([]types.BatchStatementRequest, len(movies))
	for index, movie := range movies {
		params, err := attributevalue.MarshalList([]interface{}{ratings[index], movie.Title, movie.Year})
		if err != nil {
			panic(err)
		}
		statementRequests[index] = types.BatchStatementRequest{
			Statement: aws.String(
				fmt.Sprintf("UPDATE \"%v\" SET info.rating=? WHERE title=? AND year=?", runner.TableName)),
			Parameters: params,
		}
	}

	_, err := runner.DynamoDbClient.BatchExecuteStatement(ctx, &dynamodb.BatchExecuteStatementInput{
		Statements: statementRequests,
	})
	if err != nil {
		log.Printf("Couldn't update the batch of movies. Here's why: %v\n", err)
	}
	return err
}
```
DELETE 문 배치를 사용하여 항목을 삭제합니다.  

```
// DeleteMovieBatch runs a batch of PartiQL DELETE statements to remove multiple movies
// from the DynamoDB table.
func (runner PartiQLRunner) DeleteMovieBatch(ctx context.Context, movies []Movie) error {
	statementRequests := make([]types.BatchStatementRequest, len(movies))
	for index, movie := range movies {
		params, err := attributevalue.MarshalList([]interface{}{movie.Title, movie.Year})
		if err != nil {
			panic(err)
		}
		statementRequests[index] = types.BatchStatementRequest{
			Statement: aws.String(
				fmt.Sprintf("DELETE FROM \"%v\" WHERE title=? AND year=?", runner.TableName)),
			Parameters: params,
		}
	}

	_, err := runner.DynamoDbClient.BatchExecuteStatement(ctx, &dynamodb.BatchExecuteStatementInput{
		Statements: statementRequests,
	})
	if err != nil {
		log.Printf("Couldn't delete the batch of movies. Here's why: %v\n", err)
	}
	return err
}
```
이 예시에서 사용되는 Movie 구조체를 정의합니다.  

```
import (
	"archive/zip"
	"bytes"
	"encoding/json"
	"fmt"
	"io"
	"log"
	"net/http"

	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// Movie encapsulates data about a movie. Title and Year are the composite primary key
// of the movie in Amazon DynamoDB. Title is the sort key, Year is the partition key,
// and Info is additional data.
type Movie struct {
	Title string                 `dynamodbav:"title"`
	Year  int                    `dynamodbav:"year"`
	Info  map[string]interface{} `dynamodbav:"info"`
}

// GetKey returns the composite primary key of the movie in a format that can be
// sent to DynamoDB.
func (movie Movie) GetKey() map[string]types.AttributeValue {
	title, err := attributevalue.Marshal(movie.Title)
	if err != nil {
		panic(err)
	}
	year, err := attributevalue.Marshal(movie.Year)
	if err != nil {
		panic(err)
	}
	return map[string]types.AttributeValue{"title": title, "year": year}
}

// String returns the title, year, rating, and plot of a movie, formatted for the example.
func (movie Movie) String() string {
	return fmt.Sprintf("%v\n\tReleased: %v\n\tRating: %v\n\tPlot: %v\n",
		movie.Title, movie.Year, movie.Info["rating"], movie.Info["plot"])
}
```
+  API 세부 정보는 *AWS SDK for Go API 참조*의 [BatchExecuteStatement](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.BatchExecuteStatement)를 참조하세요.

### `BatchWriteItem`
<a name="dynamodb_BatchWriteItem_go_2_topic"></a>

다음 코드 예시는 `BatchWriteItem`의 사용 방법을 보여줍니다.

**SDK for Go V2**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/gov2/dynamodb#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.

```
import (
	"context"
	"errors"
	"log"
	"time"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/expression"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// TableBasics encapsulates the Amazon DynamoDB service actions used in the examples.
// It contains a DynamoDB service client that is used to act on the specified table.
type TableBasics struct {
	DynamoDbClient *dynamodb.Client
	TableName      string
}



// AddMovieBatch adds a slice of movies to the DynamoDB table. The function sends
// batches of 25 movies to DynamoDB until all movies are added or it reaches the
// specified maximum.
func (basics TableBasics) AddMovieBatch(ctx context.Context, movies []Movie, maxMovies int) (int, error) {
	var err error
	var item map[string]types.AttributeValue
	written := 0
	batchSize := 25 // DynamoDB allows a maximum batch size of 25 items.
	start := 0
	end := start + batchSize
	for start < maxMovies && start < len(movies) {
		var writeReqs []types.WriteRequest
		if end > len(movies) {
			end = len(movies)
		}
		for _, movie := range movies[start:end] {
			item, err = attributevalue.MarshalMap(movie)
			if err != nil {
				log.Printf("Couldn't marshal movie %v for batch writing. Here's why: %v\n", movie.Title, err)
			} else {
				writeReqs = append(
					writeReqs,
					types.WriteRequest{PutRequest: &types.PutRequest{Item: item}},
				)
			}
		}
		_, err = basics.DynamoDbClient.BatchWriteItem(ctx, &dynamodb.BatchWriteItemInput{
			RequestItems: map[string][]types.WriteRequest{basics.TableName: writeReqs}})
		if err != nil {
			log.Printf("Couldn't add a batch of movies to %v. Here's why: %v\n", basics.TableName, err)
		} else {
			written += len(writeReqs)
		}
		start = end
		end += batchSize
	}

	return written, err
}
```
이 예시에서 사용되는 Movie 구조체를 정의합니다.  

```
import (
	"archive/zip"
	"bytes"
	"encoding/json"
	"fmt"
	"io"
	"log"
	"net/http"

	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// Movie encapsulates data about a movie. Title and Year are the composite primary key
// of the movie in Amazon DynamoDB. Title is the sort key, Year is the partition key,
// and Info is additional data.
type Movie struct {
	Title string                 `dynamodbav:"title"`
	Year  int                    `dynamodbav:"year"`
	Info  map[string]interface{} `dynamodbav:"info"`
}

// GetKey returns the composite primary key of the movie in a format that can be
// sent to DynamoDB.
func (movie Movie) GetKey() map[string]types.AttributeValue {
	title, err := attributevalue.Marshal(movie.Title)
	if err != nil {
		panic(err)
	}
	year, err := attributevalue.Marshal(movie.Year)
	if err != nil {
		panic(err)
	}
	return map[string]types.AttributeValue{"title": title, "year": year}
}

// String returns the title, year, rating, and plot of a movie, formatted for the example.
func (movie Movie) String() string {
	return fmt.Sprintf("%v\n\tReleased: %v\n\tRating: %v\n\tPlot: %v\n",
		movie.Title, movie.Year, movie.Info["rating"], movie.Info["plot"])
}
```
+  API 세부 정보는 *AWS SDK for Go API 참조*의 [BatchWriteItem](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.BatchWriteItem)을 참조하세요.

### `CreateTable`
<a name="dynamodb_CreateTable_go_2_topic"></a>

다음 코드 예시는 `CreateTable`의 사용 방법을 보여줍니다.

**SDK for Go V2**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/gov2/dynamodb#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.

```
import (
	"context"
	"errors"
	"log"
	"time"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/expression"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// TableBasics encapsulates the Amazon DynamoDB service actions used in the examples.
// It contains a DynamoDB service client that is used to act on the specified table.
type TableBasics struct {
	DynamoDbClient *dynamodb.Client
	TableName      string
}



// CreateMovieTable creates a DynamoDB table with a composite primary key defined as
// a string sort key named `title`, and a numeric partition key named `year`.
// This function uses NewTableExistsWaiter to wait for the table to be created by
// DynamoDB before it returns.
func (basics TableBasics) CreateMovieTable(ctx context.Context) (*types.TableDescription, error) {
	var tableDesc *types.TableDescription
	table, err := basics.DynamoDbClient.CreateTable(ctx, &dynamodb.CreateTableInput{
		AttributeDefinitions: []types.AttributeDefinition{{
			AttributeName: aws.String("year"),
			AttributeType: types.ScalarAttributeTypeN,
		}, {
			AttributeName: aws.String("title"),
			AttributeType: types.ScalarAttributeTypeS,
		}},
		KeySchema: []types.KeySchemaElement{{
			AttributeName: aws.String("year"),
			KeyType:       types.KeyTypeHash,
		}, {
			AttributeName: aws.String("title"),
			KeyType:       types.KeyTypeRange,
		}},
		TableName:   aws.String(basics.TableName),
		BillingMode: types.BillingModePayPerRequest,
	})
	if err != nil {
		log.Printf("Couldn't create table %v. Here's why: %v\n", basics.TableName, err)
	} else {
		waiter := dynamodb.NewTableExistsWaiter(basics.DynamoDbClient)
		err = waiter.Wait(ctx, &dynamodb.DescribeTableInput{
			TableName: aws.String(basics.TableName)}, 5*time.Minute)
		if err != nil {
			log.Printf("Wait for table exists failed. Here's why: %v\n", err)
		}
		tableDesc = table.TableDescription
		log.Printf("Ccreating table test")
	}
	return tableDesc, err
}
```
+  API 세부 정보는 *AWS SDK for Go API 참조*의 [CreateTable](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.CreateTable)을 참조하세요.

### `DeleteItem`
<a name="dynamodb_DeleteItem_go_2_topic"></a>

다음 코드 예시는 `DeleteItem`의 사용 방법을 보여줍니다.

**SDK for Go V2**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/gov2/dynamodb#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.

```
import (
	"context"
	"errors"
	"log"
	"time"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/expression"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// TableBasics encapsulates the Amazon DynamoDB service actions used in the examples.
// It contains a DynamoDB service client that is used to act on the specified table.
type TableBasics struct {
	DynamoDbClient *dynamodb.Client
	TableName      string
}



// DeleteMovie removes a movie from the DynamoDB table.
func (basics TableBasics) DeleteMovie(ctx context.Context, movie Movie) error {
	_, err := basics.DynamoDbClient.DeleteItem(ctx, &dynamodb.DeleteItemInput{
		TableName: aws.String(basics.TableName), Key: movie.GetKey(),
	})
	if err != nil {
		log.Printf("Couldn't delete %v from the table. Here's why: %v\n", movie.Title, err)
	}
	return err
}
```
이 예시에서 사용되는 Movie 구조체를 정의합니다.  

```
import (
	"archive/zip"
	"bytes"
	"encoding/json"
	"fmt"
	"io"
	"log"
	"net/http"

	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// Movie encapsulates data about a movie. Title and Year are the composite primary key
// of the movie in Amazon DynamoDB. Title is the sort key, Year is the partition key,
// and Info is additional data.
type Movie struct {
	Title string                 `dynamodbav:"title"`
	Year  int                    `dynamodbav:"year"`
	Info  map[string]interface{} `dynamodbav:"info"`
}

// GetKey returns the composite primary key of the movie in a format that can be
// sent to DynamoDB.
func (movie Movie) GetKey() map[string]types.AttributeValue {
	title, err := attributevalue.Marshal(movie.Title)
	if err != nil {
		panic(err)
	}
	year, err := attributevalue.Marshal(movie.Year)
	if err != nil {
		panic(err)
	}
	return map[string]types.AttributeValue{"title": title, "year": year}
}

// String returns the title, year, rating, and plot of a movie, formatted for the example.
func (movie Movie) String() string {
	return fmt.Sprintf("%v\n\tReleased: %v\n\tRating: %v\n\tPlot: %v\n",
		movie.Title, movie.Year, movie.Info["rating"], movie.Info["plot"])
}
```
+  API 세부 정보는 *AWS SDK for Go API 참조*의 [DeleteItem](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.DeleteItem)을 참조하세요.

### `DeleteTable`
<a name="dynamodb_DeleteTable_go_2_topic"></a>

다음 코드 예시는 `DeleteTable`의 사용 방법을 보여줍니다.

**SDK for Go V2**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/gov2/dynamodb#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.

```
import (
	"context"
	"errors"
	"log"
	"time"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/expression"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// TableBasics encapsulates the Amazon DynamoDB service actions used in the examples.
// It contains a DynamoDB service client that is used to act on the specified table.
type TableBasics struct {
	DynamoDbClient *dynamodb.Client
	TableName      string
}



// DeleteTable deletes the DynamoDB table and all of its data.
func (basics TableBasics) DeleteTable(ctx context.Context) error {
	_, err := basics.DynamoDbClient.DeleteTable(ctx, &dynamodb.DeleteTableInput{
		TableName: aws.String(basics.TableName)})
	if err != nil {
		log.Printf("Couldn't delete table %v. Here's why: %v\n", basics.TableName, err)
	}
	return err
}
```
+  API 세부 정보는 *AWS SDK for Go API 참조*의 [DeleteTable](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.DeleteTable)을 참조하세요.

### `DescribeTable`
<a name="dynamodb_DescribeTable_go_2_topic"></a>

다음 코드 예시는 `DescribeTable`의 사용 방법을 보여줍니다.

**SDK for Go V2**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/gov2/dynamodb#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.

```
import (
	"context"
	"errors"
	"log"
	"time"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/expression"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// TableBasics encapsulates the Amazon DynamoDB service actions used in the examples.
// It contains a DynamoDB service client that is used to act on the specified table.
type TableBasics struct {
	DynamoDbClient *dynamodb.Client
	TableName      string
}



// TableExists determines whether a DynamoDB table exists.
func (basics TableBasics) TableExists(ctx context.Context) (bool, error) {
	exists := true
	_, err := basics.DynamoDbClient.DescribeTable(
		ctx, &dynamodb.DescribeTableInput{TableName: aws.String(basics.TableName)},
	)
	if err != nil {
		var notFoundEx *types.ResourceNotFoundException
		if errors.As(err, &notFoundEx) {
			log.Printf("Table %v does not exist.\n", basics.TableName)
			err = nil
		} else {
			log.Printf("Couldn't determine existence of table %v. Here's why: %v\n", basics.TableName, err)
		}
		exists = false
	}
	return exists, err
}
```
+  API 세부 정보는 *AWS SDK for Go API 참조*의 [DescribeTable](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.DescribeTable)을 참조하세요.

### `ExecuteStatement`
<a name="dynamodb_ExecuteStatement_go_2_topic"></a>

다음 코드 예시는 `ExecuteStatement`의 사용 방법을 보여줍니다.

**SDK for Go V2**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/gov2/dynamodb#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.
예제를 위한 함수 수신기 구문을 정의합니다.  

```
import (
	"context"
	"fmt"
	"log"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// PartiQLRunner encapsulates the Amazon DynamoDB service actions used in the
// PartiQL examples. It contains a DynamoDB service client that is used to act on the
// specified table.
type PartiQLRunner struct {
	DynamoDbClient *dynamodb.Client
	TableName      string
}
```
INSERT 문을 사용하여 항목을 추가합니다.  

```
// AddMovie runs a PartiQL INSERT statement to add a movie to the DynamoDB table.
func (runner PartiQLRunner) AddMovie(ctx context.Context, movie Movie) error {
	params, err := attributevalue.MarshalList([]interface{}{movie.Title, movie.Year, movie.Info})
	if err != nil {
		panic(err)
	}
	_, err = runner.DynamoDbClient.ExecuteStatement(ctx, &dynamodb.ExecuteStatementInput{
		Statement: aws.String(
			fmt.Sprintf("INSERT INTO \"%v\" VALUE {'title': ?, 'year': ?, 'info': ?}",
				runner.TableName)),
		Parameters: params,
	})
	if err != nil {
		log.Printf("Couldn't insert an item with PartiQL. Here's why: %v\n", err)
	}
	return err
}
```
SELECT 문을 사용하여 항목을 가져옵니다.  

```
// GetMovie runs a PartiQL SELECT statement to get a movie from the DynamoDB table by
// title and year.
func (runner PartiQLRunner) GetMovie(ctx context.Context, title string, year int) (Movie, error) {
	var movie Movie
	params, err := attributevalue.MarshalList([]interface{}{title, year})
	if err != nil {
		panic(err)
	}
	response, err := runner.DynamoDbClient.ExecuteStatement(ctx, &dynamodb.ExecuteStatementInput{
		Statement: aws.String(
			fmt.Sprintf("SELECT * FROM \"%v\" WHERE title=? AND year=?",
				runner.TableName)),
		Parameters: params,
	})
	if err != nil {
		log.Printf("Couldn't get info about %v. Here's why: %v\n", title, err)
	} else {
		err = attributevalue.UnmarshalMap(response.Items[0], &movie)
		if err != nil {
			log.Printf("Couldn't unmarshal response. Here's why: %v\n", err)
		}
	}
	return movie, err
}
```
SELECT 문을 사용하여 항목 목록을 가져오고 결과를 투영합니다.  

```
// GetAllMovies runs a PartiQL SELECT statement to get all movies from the DynamoDB table.
// pageSize is not typically required and is used to show how to paginate the results.
// The results are projected to return only the title and rating of each movie.
func (runner PartiQLRunner) GetAllMovies(ctx context.Context, pageSize int32) ([]map[string]interface{}, error) {
	var output []map[string]interface{}
	var response *dynamodb.ExecuteStatementOutput
	var err error
	var nextToken *string
	for moreData := true; moreData; {
		response, err = runner.DynamoDbClient.ExecuteStatement(ctx, &dynamodb.ExecuteStatementInput{
			Statement: aws.String(
				fmt.Sprintf("SELECT title, info.rating FROM \"%v\"", runner.TableName)),
			Limit:     aws.Int32(pageSize),
			NextToken: nextToken,
		})
		if err != nil {
			log.Printf("Couldn't get movies. Here's why: %v\n", err)
			moreData = false
		} else {
			var pageOutput []map[string]interface{}
			err = attributevalue.UnmarshalListOfMaps(response.Items, &pageOutput)
			if err != nil {
				log.Printf("Couldn't unmarshal response. Here's why: %v\n", err)
			} else {
				log.Printf("Got a page of length %v.\n", len(response.Items))
				output = append(output, pageOutput...)
			}
			nextToken = response.NextToken
			moreData = nextToken != nil
		}
	}
	return output, err
}
```
UPDATE 문을 사용하여 항목을 업데이트합니다.  

```
// UpdateMovie runs a PartiQL UPDATE statement to update the rating of a movie that
// already exists in the DynamoDB table.
func (runner PartiQLRunner) UpdateMovie(ctx context.Context, movie Movie, rating float64) error {
	params, err := attributevalue.MarshalList([]interface{}{rating, movie.Title, movie.Year})
	if err != nil {
		panic(err)
	}
	_, err = runner.DynamoDbClient.ExecuteStatement(ctx, &dynamodb.ExecuteStatementInput{
		Statement: aws.String(
			fmt.Sprintf("UPDATE \"%v\" SET info.rating=? WHERE title=? AND year=?",
				runner.TableName)),
		Parameters: params,
	})
	if err != nil {
		log.Printf("Couldn't update movie %v. Here's why: %v\n", movie.Title, err)
	}
	return err
}
```
DELETE 문을 사용하여 항목을 삭제합니다.  

```
// DeleteMovie runs a PartiQL DELETE statement to remove a movie from the DynamoDB table.
func (runner PartiQLRunner) DeleteMovie(ctx context.Context, movie Movie) error {
	params, err := attributevalue.MarshalList([]interface{}{movie.Title, movie.Year})
	if err != nil {
		panic(err)
	}
	_, err = runner.DynamoDbClient.ExecuteStatement(ctx, &dynamodb.ExecuteStatementInput{
		Statement: aws.String(
			fmt.Sprintf("DELETE FROM \"%v\" WHERE title=? AND year=?",
				runner.TableName)),
		Parameters: params,
	})
	if err != nil {
		log.Printf("Couldn't delete %v from the table. Here's why: %v\n", movie.Title, err)
	}
	return err
}
```
이 예시에서 사용되는 Movie 구조체를 정의합니다.  

```
import (
	"archive/zip"
	"bytes"
	"encoding/json"
	"fmt"
	"io"
	"log"
	"net/http"

	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// Movie encapsulates data about a movie. Title and Year are the composite primary key
// of the movie in Amazon DynamoDB. Title is the sort key, Year is the partition key,
// and Info is additional data.
type Movie struct {
	Title string                 `dynamodbav:"title"`
	Year  int                    `dynamodbav:"year"`
	Info  map[string]interface{} `dynamodbav:"info"`
}

// GetKey returns the composite primary key of the movie in a format that can be
// sent to DynamoDB.
func (movie Movie) GetKey() map[string]types.AttributeValue {
	title, err := attributevalue.Marshal(movie.Title)
	if err != nil {
		panic(err)
	}
	year, err := attributevalue.Marshal(movie.Year)
	if err != nil {
		panic(err)
	}
	return map[string]types.AttributeValue{"title": title, "year": year}
}

// String returns the title, year, rating, and plot of a movie, formatted for the example.
func (movie Movie) String() string {
	return fmt.Sprintf("%v\n\tReleased: %v\n\tRating: %v\n\tPlot: %v\n",
		movie.Title, movie.Year, movie.Info["rating"], movie.Info["plot"])
}
```
+  API 세부 정보는 *AWS SDK for Go API 참조*의 [ExecuteStatement](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.ExecuteStatement)를 참조하세요.

### `GetItem`
<a name="dynamodb_GetItem_go_2_topic"></a>

다음 코드 예시는 `GetItem`의 사용 방법을 보여줍니다.

**SDK for Go V2**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/gov2/dynamodb#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.

```
import (
	"context"
	"errors"
	"log"
	"time"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/expression"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// TableBasics encapsulates the Amazon DynamoDB service actions used in the examples.
// It contains a DynamoDB service client that is used to act on the specified table.
type TableBasics struct {
	DynamoDbClient *dynamodb.Client
	TableName      string
}



// GetMovie gets movie data from the DynamoDB table by using the primary composite key
// made of title and year.
func (basics TableBasics) GetMovie(ctx context.Context, title string, year int) (Movie, error) {
	movie := Movie{Title: title, Year: year}
	response, err := basics.DynamoDbClient.GetItem(ctx, &dynamodb.GetItemInput{
		Key: movie.GetKey(), TableName: aws.String(basics.TableName),
	})
	if err != nil {
		log.Printf("Couldn't get info about %v. Here's why: %v\n", title, err)
	} else {
		err = attributevalue.UnmarshalMap(response.Item, &movie)
		if err != nil {
			log.Printf("Couldn't unmarshal response. Here's why: %v\n", err)
		}
	}
	return movie, err
}
```
이 예시에서 사용되는 Movie 구조체를 정의합니다.  

```
import (
	"archive/zip"
	"bytes"
	"encoding/json"
	"fmt"
	"io"
	"log"
	"net/http"

	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// Movie encapsulates data about a movie. Title and Year are the composite primary key
// of the movie in Amazon DynamoDB. Title is the sort key, Year is the partition key,
// and Info is additional data.
type Movie struct {
	Title string                 `dynamodbav:"title"`
	Year  int                    `dynamodbav:"year"`
	Info  map[string]interface{} `dynamodbav:"info"`
}

// GetKey returns the composite primary key of the movie in a format that can be
// sent to DynamoDB.
func (movie Movie) GetKey() map[string]types.AttributeValue {
	title, err := attributevalue.Marshal(movie.Title)
	if err != nil {
		panic(err)
	}
	year, err := attributevalue.Marshal(movie.Year)
	if err != nil {
		panic(err)
	}
	return map[string]types.AttributeValue{"title": title, "year": year}
}

// String returns the title, year, rating, and plot of a movie, formatted for the example.
func (movie Movie) String() string {
	return fmt.Sprintf("%v\n\tReleased: %v\n\tRating: %v\n\tPlot: %v\n",
		movie.Title, movie.Year, movie.Info["rating"], movie.Info["plot"])
}
```
+  API 세부 정보는 *AWS SDK for Go API 참조*의 [GetItem](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.GetItem)을 참조하세요.

### `ListTables`
<a name="dynamodb_ListTables_go_2_topic"></a>

다음 코드 예시는 `ListTables`의 사용 방법을 보여줍니다.

**SDK for Go V2**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/gov2/dynamodb#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.

```
import (
	"context"
	"errors"
	"log"
	"time"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/expression"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// TableBasics encapsulates the Amazon DynamoDB service actions used in the examples.
// It contains a DynamoDB service client that is used to act on the specified table.
type TableBasics struct {
	DynamoDbClient *dynamodb.Client
	TableName      string
}



// ListTables lists the DynamoDB table names for the current account.
func (basics TableBasics) ListTables(ctx context.Context) ([]string, error) {
	var tableNames []string
	var output *dynamodb.ListTablesOutput
	var err error
	tablePaginator := dynamodb.NewListTablesPaginator(basics.DynamoDbClient, &dynamodb.ListTablesInput{})
	for tablePaginator.HasMorePages() {
		output, err = tablePaginator.NextPage(ctx)
		if err != nil {
			log.Printf("Couldn't list tables. Here's why: %v\n", err)
			break
		} else {
			tableNames = append(tableNames, output.TableNames...)
		}
	}
	return tableNames, err
}
```
+  API 세부 정보는 *AWS SDK for Go API 참조*의 [ListTables](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.ListTables)를 참조하세요.

### `PutItem`
<a name="dynamodb_PutItem_go_2_topic"></a>

다음 코드 예시는 `PutItem`의 사용 방법을 보여줍니다.

**SDK for Go V2**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/gov2/dynamodb#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.

```
import (
	"context"
	"errors"
	"log"
	"time"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/expression"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// TableBasics encapsulates the Amazon DynamoDB service actions used in the examples.
// It contains a DynamoDB service client that is used to act on the specified table.
type TableBasics struct {
	DynamoDbClient *dynamodb.Client
	TableName      string
}



// AddMovie adds a movie the DynamoDB table.
func (basics TableBasics) AddMovie(ctx context.Context, movie Movie) error {
	item, err := attributevalue.MarshalMap(movie)
	if err != nil {
		panic(err)
	}
	_, err = basics.DynamoDbClient.PutItem(ctx, &dynamodb.PutItemInput{
		TableName: aws.String(basics.TableName), Item: item,
	})
	if err != nil {
		log.Printf("Couldn't add item to table. Here's why: %v\n", err)
	}
	return err
}
```
이 예시에서 사용되는 Movie 구조체를 정의합니다.  

```
import (
	"archive/zip"
	"bytes"
	"encoding/json"
	"fmt"
	"io"
	"log"
	"net/http"

	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// Movie encapsulates data about a movie. Title and Year are the composite primary key
// of the movie in Amazon DynamoDB. Title is the sort key, Year is the partition key,
// and Info is additional data.
type Movie struct {
	Title string                 `dynamodbav:"title"`
	Year  int                    `dynamodbav:"year"`
	Info  map[string]interface{} `dynamodbav:"info"`
}

// GetKey returns the composite primary key of the movie in a format that can be
// sent to DynamoDB.
func (movie Movie) GetKey() map[string]types.AttributeValue {
	title, err := attributevalue.Marshal(movie.Title)
	if err != nil {
		panic(err)
	}
	year, err := attributevalue.Marshal(movie.Year)
	if err != nil {
		panic(err)
	}
	return map[string]types.AttributeValue{"title": title, "year": year}
}

// String returns the title, year, rating, and plot of a movie, formatted for the example.
func (movie Movie) String() string {
	return fmt.Sprintf("%v\n\tReleased: %v\n\tRating: %v\n\tPlot: %v\n",
		movie.Title, movie.Year, movie.Info["rating"], movie.Info["plot"])
}
```
+  API 세부 정보는 *AWS SDK for Go API 참조*의 [PutItem](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.PutItem)을 참조하세요.

### `Query`
<a name="dynamodb_Query_go_2_topic"></a>

다음 코드 예시는 `Query`의 사용 방법을 보여줍니다.

**SDK for Go V2**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/gov2/dynamodb#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.

```
import (
	"context"
	"errors"
	"log"
	"time"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/expression"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// TableBasics encapsulates the Amazon DynamoDB service actions used in the examples.
// It contains a DynamoDB service client that is used to act on the specified table.
type TableBasics struct {
	DynamoDbClient *dynamodb.Client
	TableName      string
}



// Query gets all movies in the DynamoDB table that were released in the specified year.
// The function uses the `expression` package to build the key condition expression
// that is used in the query.
func (basics TableBasics) Query(ctx context.Context, releaseYear int) ([]Movie, error) {
	var err error
	var response *dynamodb.QueryOutput
	var movies []Movie
	keyEx := expression.Key("year").Equal(expression.Value(releaseYear))
	expr, err := expression.NewBuilder().WithKeyCondition(keyEx).Build()
	if err != nil {
		log.Printf("Couldn't build expression for query. Here's why: %v\n", err)
	} else {
		queryPaginator := dynamodb.NewQueryPaginator(basics.DynamoDbClient, &dynamodb.QueryInput{
			TableName:                 aws.String(basics.TableName),
			ExpressionAttributeNames:  expr.Names(),
			ExpressionAttributeValues: expr.Values(),
			KeyConditionExpression:    expr.KeyCondition(),
		})
		for queryPaginator.HasMorePages() {
			response, err = queryPaginator.NextPage(ctx)
			if err != nil {
				log.Printf("Couldn't query for movies released in %v. Here's why: %v\n", releaseYear, err)
				break
			} else {
				var moviePage []Movie
				err = attributevalue.UnmarshalListOfMaps(response.Items, &moviePage)
				if err != nil {
					log.Printf("Couldn't unmarshal query response. Here's why: %v\n", err)
					break
				} else {
					movies = append(movies, moviePage...)
				}
			}
		}
	}
	return movies, err
}
```
이 예시에서 사용되는 Movie 구조체를 정의합니다.  

```
import (
	"archive/zip"
	"bytes"
	"encoding/json"
	"fmt"
	"io"
	"log"
	"net/http"

	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// Movie encapsulates data about a movie. Title and Year are the composite primary key
// of the movie in Amazon DynamoDB. Title is the sort key, Year is the partition key,
// and Info is additional data.
type Movie struct {
	Title string                 `dynamodbav:"title"`
	Year  int                    `dynamodbav:"year"`
	Info  map[string]interface{} `dynamodbav:"info"`
}

// GetKey returns the composite primary key of the movie in a format that can be
// sent to DynamoDB.
func (movie Movie) GetKey() map[string]types.AttributeValue {
	title, err := attributevalue.Marshal(movie.Title)
	if err != nil {
		panic(err)
	}
	year, err := attributevalue.Marshal(movie.Year)
	if err != nil {
		panic(err)
	}
	return map[string]types.AttributeValue{"title": title, "year": year}
}

// String returns the title, year, rating, and plot of a movie, formatted for the example.
func (movie Movie) String() string {
	return fmt.Sprintf("%v\n\tReleased: %v\n\tRating: %v\n\tPlot: %v\n",
		movie.Title, movie.Year, movie.Info["rating"], movie.Info["plot"])
}
```
+  API 세부 정보는 *AWS SDK for Go API 참조*의 [Query](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.Query)를 참조하세요.

### `Scan`
<a name="dynamodb_Scan_go_2_topic"></a>

다음 코드 예시는 `Scan`의 사용 방법을 보여줍니다.

**SDK for Go V2**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/gov2/dynamodb#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.

```
import (
	"context"
	"errors"
	"log"
	"time"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/expression"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// TableBasics encapsulates the Amazon DynamoDB service actions used in the examples.
// It contains a DynamoDB service client that is used to act on the specified table.
type TableBasics struct {
	DynamoDbClient *dynamodb.Client
	TableName      string
}



// Scan gets all movies in the DynamoDB table that were released in a range of years
// and projects them to return a reduced set of fields.
// The function uses the `expression` package to build the filter and projection
// expressions.
func (basics TableBasics) Scan(ctx context.Context, startYear int, endYear int) ([]Movie, error) {
	var movies []Movie
	var err error
	var response *dynamodb.ScanOutput
	filtEx := expression.Name("year").Between(expression.Value(startYear), expression.Value(endYear))
	projEx := expression.NamesList(
		expression.Name("year"), expression.Name("title"), expression.Name("info.rating"))
	expr, err := expression.NewBuilder().WithFilter(filtEx).WithProjection(projEx).Build()
	if err != nil {
		log.Printf("Couldn't build expressions for scan. Here's why: %v\n", err)
	} else {
		scanPaginator := dynamodb.NewScanPaginator(basics.DynamoDbClient, &dynamodb.ScanInput{
			TableName:                 aws.String(basics.TableName),
			ExpressionAttributeNames:  expr.Names(),
			ExpressionAttributeValues: expr.Values(),
			FilterExpression:          expr.Filter(),
			ProjectionExpression:      expr.Projection(),
		})
		for scanPaginator.HasMorePages() {
			response, err = scanPaginator.NextPage(ctx)
			if err != nil {
				log.Printf("Couldn't scan for movies released between %v and %v. Here's why: %v\n",
					startYear, endYear, err)
				break
			} else {
				var moviePage []Movie
				err = attributevalue.UnmarshalListOfMaps(response.Items, &moviePage)
				if err != nil {
					log.Printf("Couldn't unmarshal query response. Here's why: %v\n", err)
					break
				} else {
					movies = append(movies, moviePage...)
				}
			}
		}
	}
	return movies, err
}
```
이 예시에서 사용되는 Movie 구조체를 정의합니다.  

```
import (
	"archive/zip"
	"bytes"
	"encoding/json"
	"fmt"
	"io"
	"log"
	"net/http"

	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// Movie encapsulates data about a movie. Title and Year are the composite primary key
// of the movie in Amazon DynamoDB. Title is the sort key, Year is the partition key,
// and Info is additional data.
type Movie struct {
	Title string                 `dynamodbav:"title"`
	Year  int                    `dynamodbav:"year"`
	Info  map[string]interface{} `dynamodbav:"info"`
}

// GetKey returns the composite primary key of the movie in a format that can be
// sent to DynamoDB.
func (movie Movie) GetKey() map[string]types.AttributeValue {
	title, err := attributevalue.Marshal(movie.Title)
	if err != nil {
		panic(err)
	}
	year, err := attributevalue.Marshal(movie.Year)
	if err != nil {
		panic(err)
	}
	return map[string]types.AttributeValue{"title": title, "year": year}
}

// String returns the title, year, rating, and plot of a movie, formatted for the example.
func (movie Movie) String() string {
	return fmt.Sprintf("%v\n\tReleased: %v\n\tRating: %v\n\tPlot: %v\n",
		movie.Title, movie.Year, movie.Info["rating"], movie.Info["plot"])
}
```
+  API 세부 정보는 *AWS SDK for Go API 참조*의 [Scan](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.Scan)을 참조하세요.

### `UpdateItem`
<a name="dynamodb_UpdateItem_go_2_topic"></a>

다음 코드 예시는 `UpdateItem`의 사용 방법을 보여줍니다.

**SDK for Go V2**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/gov2/dynamodb#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.

```
import (
	"context"
	"errors"
	"log"
	"time"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/expression"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// TableBasics encapsulates the Amazon DynamoDB service actions used in the examples.
// It contains a DynamoDB service client that is used to act on the specified table.
type TableBasics struct {
	DynamoDbClient *dynamodb.Client
	TableName      string
}



// UpdateMovie updates the rating and plot of a movie that already exists in the
// DynamoDB table. This function uses the `expression` package to build the update
// expression.
func (basics TableBasics) UpdateMovie(ctx context.Context, movie Movie) (map[string]map[string]interface{}, error) {
	var err error
	var response *dynamodb.UpdateItemOutput
	var attributeMap map[string]map[string]interface{}
	update := expression.Set(expression.Name("info.rating"), expression.Value(movie.Info["rating"]))
	update.Set(expression.Name("info.plot"), expression.Value(movie.Info["plot"]))
	expr, err := expression.NewBuilder().WithUpdate(update).Build()
	if err != nil {
		log.Printf("Couldn't build expression for update. Here's why: %v\n", err)
	} else {
		response, err = basics.DynamoDbClient.UpdateItem(ctx, &dynamodb.UpdateItemInput{
			TableName:                 aws.String(basics.TableName),
			Key:                       movie.GetKey(),
			ExpressionAttributeNames:  expr.Names(),
			ExpressionAttributeValues: expr.Values(),
			UpdateExpression:          expr.Update(),
			ReturnValues:              types.ReturnValueUpdatedNew,
		})
		if err != nil {
			log.Printf("Couldn't update movie %v. Here's why: %v\n", movie.Title, err)
		} else {
			err = attributevalue.UnmarshalMap(response.Attributes, &attributeMap)
			if err != nil {
				log.Printf("Couldn't unmarshall update response. Here's why: %v\n", err)
			}
		}
	}
	return attributeMap, err
}
```
이 예시에서 사용되는 Movie 구조체를 정의합니다.  

```
import (
	"archive/zip"
	"bytes"
	"encoding/json"
	"fmt"
	"io"
	"log"
	"net/http"

	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// Movie encapsulates data about a movie. Title and Year are the composite primary key
// of the movie in Amazon DynamoDB. Title is the sort key, Year is the partition key,
// and Info is additional data.
type Movie struct {
	Title string                 `dynamodbav:"title"`
	Year  int                    `dynamodbav:"year"`
	Info  map[string]interface{} `dynamodbav:"info"`
}

// GetKey returns the composite primary key of the movie in a format that can be
// sent to DynamoDB.
func (movie Movie) GetKey() map[string]types.AttributeValue {
	title, err := attributevalue.Marshal(movie.Title)
	if err != nil {
		panic(err)
	}
	year, err := attributevalue.Marshal(movie.Year)
	if err != nil {
		panic(err)
	}
	return map[string]types.AttributeValue{"title": title, "year": year}
}

// String returns the title, year, rating, and plot of a movie, formatted for the example.
func (movie Movie) String() string {
	return fmt.Sprintf("%v\n\tReleased: %v\n\tRating: %v\n\tPlot: %v\n",
		movie.Title, movie.Year, movie.Info["rating"], movie.Info["plot"])
}
```
+  API 세부 정보는 *AWS SDK for Go API 참조*의 [UpdateItem](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.UpdateItem)을 참조하세요.

## 시나리오
<a name="scenarios"></a>

### PartiQL 문 배치를 사용하여 테이블 쿼리
<a name="dynamodb_Scenario_PartiQLBatch_go_2_topic"></a>

다음 코드 예제에서는 다음과 같은 작업을 수행하는 방법을 보여줍니다.
+ 여러 SELECT 문을 실행하여 항목 배치를 가져옵니다.
+ 여러 INSERT 문을 실행하여 항목 배치를 추가합니다.
+ 여러 UPDATE 문을 실행하여 항목 배치를 업데이트합니다.
+ 여러 DELETE 문을 실행하여 항목 배치를 삭제합니다.

**SDK for Go V2**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/gov2/dynamodb#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.
테이블을 생성하고 PartiQL 쿼리 배치를 실행하는 시나리오를 실행합니다.  

```
import (
	"context"
	"fmt"
	"log"
	"strings"
	"time"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb"
	"github.com/awsdocs/aws-doc-sdk-examples/gov2/dynamodb/actions"
)

// RunPartiQLBatchScenario shows you how to use the AWS SDK for Go
// to run batches of PartiQL statements to query a table that stores data about movies.
//
//   - Use batches of PartiQL statements to add, get, update, and delete data for
//     individual movies.
//
// This example creates an Amazon DynamoDB service client from the specified sdkConfig so that
// you can replace it with a mocked or stubbed config for unit testing.
//
// This example creates and deletes a DynamoDB table to use during the scenario.
func RunPartiQLBatchScenario(ctx context.Context, sdkConfig aws.Config, tableName string) {
	defer func() {
		if r := recover(); r != nil {
			fmt.Printf("Something went wrong with the demo.")
		}
	}()

	log.Println(strings.Repeat("-", 88))
	log.Println("Welcome to the Amazon DynamoDB PartiQL batch demo.")
	log.Println(strings.Repeat("-", 88))

	tableBasics := actions.TableBasics{
		DynamoDbClient: dynamodb.NewFromConfig(sdkConfig),
		TableName:      tableName,
	}
	runner := actions.PartiQLRunner{
		DynamoDbClient: dynamodb.NewFromConfig(sdkConfig),
		TableName:      tableName,
	}

	exists, err := tableBasics.TableExists(ctx)
	if err != nil {
		panic(err)
	}
	if !exists {
		log.Printf("Creating table %v...\n", tableName)
		_, err = tableBasics.CreateMovieTable(ctx)
		if err != nil {
			panic(err)
		} else {
			log.Printf("Created table %v.\n", tableName)
		}
	} else {
		log.Printf("Table %v already exists.\n", tableName)
	}
	log.Println(strings.Repeat("-", 88))

	currentYear, _, _ := time.Now().Date()
	customMovies := []actions.Movie{{
		Title: "House PartiQL",
		Year:  currentYear - 5,
		Info: map[string]interface{}{
			"plot":   "Wacky high jinks result from querying a mysterious database.",
			"rating": 8.5}}, {
		Title: "House PartiQL 2",
		Year:  currentYear - 3,
		Info: map[string]interface{}{
			"plot":   "Moderate high jinks result from querying another mysterious database.",
			"rating": 6.5}}, {
		Title: "House PartiQL 3",
		Year:  currentYear - 1,
		Info: map[string]interface{}{
			"plot":   "Tepid high jinks result from querying yet another mysterious database.",
			"rating": 2.5},
	},
	}

	log.Printf("Inserting a batch of movies into table '%v'.\n", tableName)
	err = runner.AddMovieBatch(ctx, customMovies)
	if err == nil {
		log.Printf("Added %v movies to the table.\n", len(customMovies))
	}
	log.Println(strings.Repeat("-", 88))

	log.Println("Getting data for a batch of movies.")
	movies, err := runner.GetMovieBatch(ctx, customMovies)
	if err == nil {
		for _, movie := range movies {
			log.Println(movie)
		}
	}
	log.Println(strings.Repeat("-", 88))

	newRatings := []float64{7.7, 4.4, 1.1}
	log.Println("Updating a batch of movies with new ratings.")
	err = runner.UpdateMovieBatch(ctx, customMovies, newRatings)
	if err == nil {
		log.Printf("Updated %v movies with new ratings.\n", len(customMovies))
	}
	log.Println(strings.Repeat("-", 88))

	log.Println("Getting projected data from the table to verify our update.")
	log.Println("Using a page size of 2 to demonstrate paging.")
	projections, err := runner.GetAllMovies(ctx, 2)
	if err == nil {
		log.Println("All movies:")
		for _, projection := range projections {
			log.Println(projection)
		}
	}
	log.Println(strings.Repeat("-", 88))

	log.Println("Deleting a batch of movies.")
	err = runner.DeleteMovieBatch(ctx, customMovies)
	if err == nil {
		log.Printf("Deleted %v movies.\n", len(customMovies))
	}

	err = tableBasics.DeleteTable(ctx)
	if err == nil {
		log.Printf("Deleted table %v.\n", tableBasics.TableName)
	}

	log.Println(strings.Repeat("-", 88))
	log.Println("Thanks for watching!")
	log.Println(strings.Repeat("-", 88))
}
```
이 예시에서 사용되는 Movie 구조체를 정의합니다.  

```
import (
	"archive/zip"
	"bytes"
	"encoding/json"
	"fmt"
	"io"
	"log"
	"net/http"

	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// Movie encapsulates data about a movie. Title and Year are the composite primary key
// of the movie in Amazon DynamoDB. Title is the sort key, Year is the partition key,
// and Info is additional data.
type Movie struct {
	Title string                 `dynamodbav:"title"`
	Year  int                    `dynamodbav:"year"`
	Info  map[string]interface{} `dynamodbav:"info"`
}

// GetKey returns the composite primary key of the movie in a format that can be
// sent to DynamoDB.
func (movie Movie) GetKey() map[string]types.AttributeValue {
	title, err := attributevalue.Marshal(movie.Title)
	if err != nil {
		panic(err)
	}
	year, err := attributevalue.Marshal(movie.Year)
	if err != nil {
		panic(err)
	}
	return map[string]types.AttributeValue{"title": title, "year": year}
}

// String returns the title, year, rating, and plot of a movie, formatted for the example.
func (movie Movie) String() string {
	return fmt.Sprintf("%v\n\tReleased: %v\n\tRating: %v\n\tPlot: %v\n",
		movie.Title, movie.Year, movie.Info["rating"], movie.Info["plot"])
}
```
PartiQL 문을 실행하는 구조체와 메서드를 생성합니다.  

```
import (
	"context"
	"fmt"
	"log"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// PartiQLRunner encapsulates the Amazon DynamoDB service actions used in the
// PartiQL examples. It contains a DynamoDB service client that is used to act on the
// specified table.
type PartiQLRunner struct {
	DynamoDbClient *dynamodb.Client
	TableName      string
}



// AddMovieBatch runs a batch of PartiQL INSERT statements to add multiple movies to the
// DynamoDB table.
func (runner PartiQLRunner) AddMovieBatch(ctx context.Context, movies []Movie) error {
	statementRequests := make([]types.BatchStatementRequest, len(movies))
	for index, movie := range movies {
		params, err := attributevalue.MarshalList([]interface{}{movie.Title, movie.Year, movie.Info})
		if err != nil {
			panic(err)
		}
		statementRequests[index] = types.BatchStatementRequest{
			Statement: aws.String(fmt.Sprintf(
				"INSERT INTO \"%v\" VALUE {'title': ?, 'year': ?, 'info': ?}", runner.TableName)),
			Parameters: params,
		}
	}

	_, err := runner.DynamoDbClient.BatchExecuteStatement(ctx, &dynamodb.BatchExecuteStatementInput{
		Statements: statementRequests,
	})
	if err != nil {
		log.Printf("Couldn't insert a batch of items with PartiQL. Here's why: %v\n", err)
	}
	return err
}



// GetMovieBatch runs a batch of PartiQL SELECT statements to get multiple movies from
// the DynamoDB table by title and year.
func (runner PartiQLRunner) GetMovieBatch(ctx context.Context, movies []Movie) ([]Movie, error) {
	statementRequests := make([]types.BatchStatementRequest, len(movies))
	for index, movie := range movies {
		params, err := attributevalue.MarshalList([]interface{}{movie.Title, movie.Year})
		if err != nil {
			panic(err)
		}
		statementRequests[index] = types.BatchStatementRequest{
			Statement: aws.String(
				fmt.Sprintf("SELECT * FROM \"%v\" WHERE title=? AND year=?", runner.TableName)),
			Parameters: params,
		}
	}

	output, err := runner.DynamoDbClient.BatchExecuteStatement(ctx, &dynamodb.BatchExecuteStatementInput{
		Statements: statementRequests,
	})
	var outMovies []Movie
	if err != nil {
		log.Printf("Couldn't get a batch of items with PartiQL. Here's why: %v\n", err)
	} else {
		for _, response := range output.Responses {
			var movie Movie
			err = attributevalue.UnmarshalMap(response.Item, &movie)
			if err != nil {
				log.Printf("Couldn't unmarshal response. Here's why: %v\n", err)
			} else {
				outMovies = append(outMovies, movie)
			}
		}
	}
	return outMovies, err
}



// GetAllMovies runs a PartiQL SELECT statement to get all movies from the DynamoDB table.
// pageSize is not typically required and is used to show how to paginate the results.
// The results are projected to return only the title and rating of each movie.
func (runner PartiQLRunner) GetAllMovies(ctx context.Context, pageSize int32) ([]map[string]interface{}, error) {
	var output []map[string]interface{}
	var response *dynamodb.ExecuteStatementOutput
	var err error
	var nextToken *string
	for moreData := true; moreData; {
		response, err = runner.DynamoDbClient.ExecuteStatement(ctx, &dynamodb.ExecuteStatementInput{
			Statement: aws.String(
				fmt.Sprintf("SELECT title, info.rating FROM \"%v\"", runner.TableName)),
			Limit:     aws.Int32(pageSize),
			NextToken: nextToken,
		})
		if err != nil {
			log.Printf("Couldn't get movies. Here's why: %v\n", err)
			moreData = false
		} else {
			var pageOutput []map[string]interface{}
			err = attributevalue.UnmarshalListOfMaps(response.Items, &pageOutput)
			if err != nil {
				log.Printf("Couldn't unmarshal response. Here's why: %v\n", err)
			} else {
				log.Printf("Got a page of length %v.\n", len(response.Items))
				output = append(output, pageOutput...)
			}
			nextToken = response.NextToken
			moreData = nextToken != nil
		}
	}
	return output, err
}



// UpdateMovieBatch runs a batch of PartiQL UPDATE statements to update the rating of
// multiple movies that already exist in the DynamoDB table.
func (runner PartiQLRunner) UpdateMovieBatch(ctx context.Context, movies []Movie, ratings []float64) error {
	statementRequests := make([]types.BatchStatementRequest, len(movies))
	for index, movie := range movies {
		params, err := attributevalue.MarshalList([]interface{}{ratings[index], movie.Title, movie.Year})
		if err != nil {
			panic(err)
		}
		statementRequests[index] = types.BatchStatementRequest{
			Statement: aws.String(
				fmt.Sprintf("UPDATE \"%v\" SET info.rating=? WHERE title=? AND year=?", runner.TableName)),
			Parameters: params,
		}
	}

	_, err := runner.DynamoDbClient.BatchExecuteStatement(ctx, &dynamodb.BatchExecuteStatementInput{
		Statements: statementRequests,
	})
	if err != nil {
		log.Printf("Couldn't update the batch of movies. Here's why: %v\n", err)
	}
	return err
}



// DeleteMovieBatch runs a batch of PartiQL DELETE statements to remove multiple movies
// from the DynamoDB table.
func (runner PartiQLRunner) DeleteMovieBatch(ctx context.Context, movies []Movie) error {
	statementRequests := make([]types.BatchStatementRequest, len(movies))
	for index, movie := range movies {
		params, err := attributevalue.MarshalList([]interface{}{movie.Title, movie.Year})
		if err != nil {
			panic(err)
		}
		statementRequests[index] = types.BatchStatementRequest{
			Statement: aws.String(
				fmt.Sprintf("DELETE FROM \"%v\" WHERE title=? AND year=?", runner.TableName)),
			Parameters: params,
		}
	}

	_, err := runner.DynamoDbClient.BatchExecuteStatement(ctx, &dynamodb.BatchExecuteStatementInput{
		Statements: statementRequests,
	})
	if err != nil {
		log.Printf("Couldn't delete the batch of movies. Here's why: %v\n", err)
	}
	return err
}
```
+  API 세부 정보는 *AWS SDK for Go API 참조*의 [BatchExecuteStatement](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.BatchExecuteStatement)를 참조하세요.

### PartiQL을 사용하여 테이블 쿼리
<a name="dynamodb_Scenario_PartiQLSingle_go_2_topic"></a>

다음 코드 예제에서는 다음과 같은 작업을 수행하는 방법을 보여줍니다.
+ SELECT 문을 실행하여 항목을 가져옵니다.
+ INSERT 문을 실행하여 항목을 추가합니다.
+ UPDATE 문을 실행하여 항목을 업데이트합니다.
+ DELETE 문을 실행하여 항목을 삭제합니다.

**SDK for Go V2**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/gov2/dynamodb#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.
테이블을 생성하고 PartiQL 쿼리를 실행하는 시나리오를 실행합니다.  

```
import (
	"context"
	"fmt"
	"log"
	"strings"
	"time"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb"
	"github.com/awsdocs/aws-doc-sdk-examples/gov2/dynamodb/actions"
)

// RunPartiQLSingleScenario shows you how to use the AWS SDK for Go
// to use PartiQL to query a table that stores data about movies.
//
// * Use PartiQL statements to add, get, update, and delete data for individual movies.
//
// This example creates an Amazon DynamoDB service client from the specified sdkConfig so that
// you can replace it with a mocked or stubbed config for unit testing.
//
// This example creates and deletes a DynamoDB table to use during the scenario.
func RunPartiQLSingleScenario(ctx context.Context, sdkConfig aws.Config, tableName string) {
	defer func() {
		if r := recover(); r != nil {
			fmt.Printf("Something went wrong with the demo.")
		}
	}()

	log.Println(strings.Repeat("-", 88))
	log.Println("Welcome to the Amazon DynamoDB PartiQL single action demo.")
	log.Println(strings.Repeat("-", 88))

	tableBasics := actions.TableBasics{
		DynamoDbClient: dynamodb.NewFromConfig(sdkConfig),
		TableName:      tableName,
	}
	runner := actions.PartiQLRunner{
		DynamoDbClient: dynamodb.NewFromConfig(sdkConfig),
		TableName:      tableName,
	}

	exists, err := tableBasics.TableExists(ctx)
	if err != nil {
		panic(err)
	}
	if !exists {
		log.Printf("Creating table %v...\n", tableName)
		_, err = tableBasics.CreateMovieTable(ctx)
		if err != nil {
			panic(err)
		} else {
			log.Printf("Created table %v.\n", tableName)
		}
	} else {
		log.Printf("Table %v already exists.\n", tableName)
	}
	log.Println(strings.Repeat("-", 88))

	currentYear, _, _ := time.Now().Date()
	customMovie := actions.Movie{
		Title: "24 Hour PartiQL People",
		Year:  currentYear,
		Info: map[string]interface{}{
			"plot":   "A group of data developers discover a new query language they can't stop using.",
			"rating": 9.9,
		},
	}

	log.Printf("Inserting movie '%v' released in %v.", customMovie.Title, customMovie.Year)
	err = runner.AddMovie(ctx, customMovie)
	if err == nil {
		log.Printf("Added %v to the movie table.\n", customMovie.Title)
	}
	log.Println(strings.Repeat("-", 88))

	log.Printf("Getting data for movie '%v' released in %v.", customMovie.Title, customMovie.Year)
	movie, err := runner.GetMovie(ctx, customMovie.Title, customMovie.Year)
	if err == nil {
		log.Println(movie)
	}
	log.Println(strings.Repeat("-", 88))

	newRating := 6.6
	log.Printf("Updating movie '%v' with a rating of %v.", customMovie.Title, newRating)
	err = runner.UpdateMovie(ctx, customMovie, newRating)
	if err == nil {
		log.Printf("Updated %v with a new rating.\n", customMovie.Title)
	}
	log.Println(strings.Repeat("-", 88))

	log.Printf("Getting data again to verify the update.")
	movie, err = runner.GetMovie(ctx, customMovie.Title, customMovie.Year)
	if err == nil {
		log.Println(movie)
	}
	log.Println(strings.Repeat("-", 88))

	log.Printf("Deleting movie '%v'.\n", customMovie.Title)
	err = runner.DeleteMovie(ctx, customMovie)
	if err == nil {
		log.Printf("Deleted %v.\n", customMovie.Title)
	}

	err = tableBasics.DeleteTable(ctx)
	if err == nil {
		log.Printf("Deleted table %v.\n", tableBasics.TableName)
	}

	log.Println(strings.Repeat("-", 88))
	log.Println("Thanks for watching!")
	log.Println(strings.Repeat("-", 88))
}
```
이 예시에서 사용되는 Movie 구조체를 정의합니다.  

```
import (
	"archive/zip"
	"bytes"
	"encoding/json"
	"fmt"
	"io"
	"log"
	"net/http"

	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// Movie encapsulates data about a movie. Title and Year are the composite primary key
// of the movie in Amazon DynamoDB. Title is the sort key, Year is the partition key,
// and Info is additional data.
type Movie struct {
	Title string                 `dynamodbav:"title"`
	Year  int                    `dynamodbav:"year"`
	Info  map[string]interface{} `dynamodbav:"info"`
}

// GetKey returns the composite primary key of the movie in a format that can be
// sent to DynamoDB.
func (movie Movie) GetKey() map[string]types.AttributeValue {
	title, err := attributevalue.Marshal(movie.Title)
	if err != nil {
		panic(err)
	}
	year, err := attributevalue.Marshal(movie.Year)
	if err != nil {
		panic(err)
	}
	return map[string]types.AttributeValue{"title": title, "year": year}
}

// String returns the title, year, rating, and plot of a movie, formatted for the example.
func (movie Movie) String() string {
	return fmt.Sprintf("%v\n\tReleased: %v\n\tRating: %v\n\tPlot: %v\n",
		movie.Title, movie.Year, movie.Info["rating"], movie.Info["plot"])
}
```
PartiQL 문을 실행하는 구조체와 메서드를 생성합니다.  

```
import (
	"context"
	"fmt"
	"log"

	"github.com/aws/aws-sdk-go-v2/aws"
	"github.com/aws/aws-sdk-go-v2/feature/dynamodb/attributevalue"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb"
	"github.com/aws/aws-sdk-go-v2/service/dynamodb/types"
)

// PartiQLRunner encapsulates the Amazon DynamoDB service actions used in the
// PartiQL examples. It contains a DynamoDB service client that is used to act on the
// specified table.
type PartiQLRunner struct {
	DynamoDbClient *dynamodb.Client
	TableName      string
}



// AddMovie runs a PartiQL INSERT statement to add a movie to the DynamoDB table.
func (runner PartiQLRunner) AddMovie(ctx context.Context, movie Movie) error {
	params, err := attributevalue.MarshalList([]interface{}{movie.Title, movie.Year, movie.Info})
	if err != nil {
		panic(err)
	}
	_, err = runner.DynamoDbClient.ExecuteStatement(ctx, &dynamodb.ExecuteStatementInput{
		Statement: aws.String(
			fmt.Sprintf("INSERT INTO \"%v\" VALUE {'title': ?, 'year': ?, 'info': ?}",
				runner.TableName)),
		Parameters: params,
	})
	if err != nil {
		log.Printf("Couldn't insert an item with PartiQL. Here's why: %v\n", err)
	}
	return err
}



// GetMovie runs a PartiQL SELECT statement to get a movie from the DynamoDB table by
// title and year.
func (runner PartiQLRunner) GetMovie(ctx context.Context, title string, year int) (Movie, error) {
	var movie Movie
	params, err := attributevalue.MarshalList([]interface{}{title, year})
	if err != nil {
		panic(err)
	}
	response, err := runner.DynamoDbClient.ExecuteStatement(ctx, &dynamodb.ExecuteStatementInput{
		Statement: aws.String(
			fmt.Sprintf("SELECT * FROM \"%v\" WHERE title=? AND year=?",
				runner.TableName)),
		Parameters: params,
	})
	if err != nil {
		log.Printf("Couldn't get info about %v. Here's why: %v\n", title, err)
	} else {
		err = attributevalue.UnmarshalMap(response.Items[0], &movie)
		if err != nil {
			log.Printf("Couldn't unmarshal response. Here's why: %v\n", err)
		}
	}
	return movie, err
}



// UpdateMovie runs a PartiQL UPDATE statement to update the rating of a movie that
// already exists in the DynamoDB table.
func (runner PartiQLRunner) UpdateMovie(ctx context.Context, movie Movie, rating float64) error {
	params, err := attributevalue.MarshalList([]interface{}{rating, movie.Title, movie.Year})
	if err != nil {
		panic(err)
	}
	_, err = runner.DynamoDbClient.ExecuteStatement(ctx, &dynamodb.ExecuteStatementInput{
		Statement: aws.String(
			fmt.Sprintf("UPDATE \"%v\" SET info.rating=? WHERE title=? AND year=?",
				runner.TableName)),
		Parameters: params,
	})
	if err != nil {
		log.Printf("Couldn't update movie %v. Here's why: %v\n", movie.Title, err)
	}
	return err
}



// DeleteMovie runs a PartiQL DELETE statement to remove a movie from the DynamoDB table.
func (runner PartiQLRunner) DeleteMovie(ctx context.Context, movie Movie) error {
	params, err := attributevalue.MarshalList([]interface{}{movie.Title, movie.Year})
	if err != nil {
		panic(err)
	}
	_, err = runner.DynamoDbClient.ExecuteStatement(ctx, &dynamodb.ExecuteStatementInput{
		Statement: aws.String(
			fmt.Sprintf("DELETE FROM \"%v\" WHERE title=? AND year=?",
				runner.TableName)),
		Parameters: params,
	})
	if err != nil {
		log.Printf("Couldn't delete %v from the table. Here's why: %v\n", movie.Title, err)
	}
	return err
}
```
+  API 세부 정보는 *AWS SDK for Go API 참조*의 [ExecuteStatement](https://pkg.go.dev/github.com/aws/aws-sdk-go-v2/service/dynamodb#Client.ExecuteStatement)를 참조하세요.

## 서버리스 예제
<a name="serverless_examples"></a>

### DynamoDB 트리거에서 간접적으로 Lambda 함수 간접 호출
<a name="serverless_DynamoDB_Lambda_go_2_topic"></a>

다음 코드 예제에서는 DynamoDB 스트림에서 레코드를 받아 트리거된 이벤트를 수신하는 Lambda 함수를 구현하는 방법을 보여줍니다. 이 함수는 DynamoDB 페이로드를 검색하고 레코드 콘텐츠를 로깅합니다.

**SDK for Go V2**  
 GitHub에 더 많은 내용이 있습니다. [서버리스 예제](https://github.com/aws-samples/serverless-snippets/tree/main/integration-ddb-to-lambda) 리포지토리에서 전체 예제를 찾아보고 설정 및 실행 방법을 알아봅니다.
Go를 사용하여 Lambda로 DynamoDB 이벤트 사용.  

```
// Copyright Amazon.com, Inc. or its affiliates. All Rights Reserved.
// SPDX-License-Identifier: Apache-2.0
package main

import (
	"context"
	"github.com/aws/aws-lambda-go/lambda"
	"github.com/aws/aws-lambda-go/events"
	"fmt"
)

func HandleRequest(ctx context.Context, event events.DynamoDBEvent) (*string, error) {
	if len(event.Records) == 0 {
		return nil, fmt.Errorf("received empty event")
	}

	for _, record := range event.Records {
	 	LogDynamoDBRecord(record)
	}

	message := fmt.Sprintf("Records processed: %d", len(event.Records))
	return &message, nil
}

func main() {
	lambda.Start(HandleRequest)
}

func LogDynamoDBRecord(record events.DynamoDBEventRecord){
	fmt.Println(record.EventID)
	fmt.Println(record.EventName)
	fmt.Printf("%+v\n", record.Change)
}
```

### DynamoDB 트리거로 Lambda 함수에 대한 배치 항목 실패 보고
<a name="serverless_DynamoDB_Lambda_batch_item_failures_go_2_topic"></a>

다음 코드 예제에서는 DynamoDB 스트림에서 이벤트를 수신하는 Lambda 함수에 대한 부분 배치 응답을 구현하는 방법을 보여줍니다. 이 함수는 응답으로 배치 항목 실패를 보고하고 나중에 해당 메시지를 다시 시도하도록 Lambda에 신호를 보냅니다.

**SDK for Go V2**  
 GitHub에 더 많은 내용이 있습니다. [서버리스 예제](https://github.com/aws-samples/serverless-snippets/tree/main/integration-ddb-to-lambda-with-batch-item-handling) 리포지토리에서 전체 예제를 찾아보고 설정 및 실행 방법을 알아봅니다.
Go를 사용하여 Lambda로 DynamoDB 배치 항목 실패 보고.  

```
// Copyright Amazon.com, Inc. or its affiliates. All Rights Reserved.
// SPDX-License-Identifier: Apache-2.0
package main

import (
	"context"
	"github.com/aws/aws-lambda-go/events"
	"github.com/aws/aws-lambda-go/lambda"
)

type BatchItemFailure struct {
	ItemIdentifier string `json:"ItemIdentifier"`
}

type BatchResult struct {
	BatchItemFailures []BatchItemFailure `json:"BatchItemFailures"`
}

func HandleRequest(ctx context.Context, event events.DynamoDBEvent) (*BatchResult, error) {
	var batchItemFailures []BatchItemFailure
	curRecordSequenceNumber := ""

	for _, record := range event.Records {
		// Process your record
		curRecordSequenceNumber = record.Change.SequenceNumber
	}

	if curRecordSequenceNumber != "" {
		batchItemFailures = append(batchItemFailures, BatchItemFailure{ItemIdentifier: curRecordSequenceNumber})
	}
	
	batchResult := BatchResult{
		BatchItemFailures: batchItemFailures,
	}

	return &batchResult, nil
}

func main() {
	lambda.Start(HandleRequest)
}
```

## AWS 커뮤니티 기여
<a name="aws_community_contributions"></a>

### 서버리스 애플리케이션 빌드 및 테스트
<a name="tributary-lite_serverless-application_go_2_topic"></a>

다음 코드 예제에서는 Lambda 및 DynamoDB와 함께 API 게이트웨이를 사용하여 서버리스 애플리케이션을 빌드하고 테스트하는 방법을 보여줍니다.

**SDK for Go V2**  
 Go SDK를 사용하여 Lambda 및 DynamoDB가 포함된 API 게이트웨이로 구성된 서버리스 애플리케이션을 빌드하고 테스트하는 방법을 보여줍니다.  
 전체 소스 코드와 설정 및 실행 방법에 대한 지침은 [GitHub](https://github.com/aws-samples/serverless-go-demo)에서 전체 예제를 참조하세요.  

**이 예제에서 사용되는 서비스**
+ API Gateway
+ DynamoDB
+ Lambda