Tools for PowerShell를 사용한 CodePipeline 예제 - AWS SDK 코드 예제
작업

AWS Doc SDK ExamplesWord AWS SDK 리포지토리에는 더 많은 GitHub 예제가 있습니다.

기계 번역으로 제공되는 번역입니다. 제공된 번역과 원본 영어의 내용이 상충하는 경우에는 영어 버전이 우선합니다.

Tools for PowerShell를 사용한 CodePipeline 예제

다음 코드 예제에서는 AWS Tools for PowerShell with CodePipeline를 사용하여 작업을 수행하고 일반적인 시나리오를 구현하는 방법을 보여줍니다.

작업은 대규모 프로그램에서 발췌한 코드이며 컨텍스트에 맞춰 실행해야 합니다. 작업은 개별 서비스 함수를 직접적으로 호출하는 방법을 보여주며 관련 시나리오의 컨텍스트에 맞는 작업을 볼 수 있습니다.

각 예제에는 컨텍스트에서 코드를 설정하고 실행하는 방법에 대한 지침을 찾을 수 있는 전체 소스 코드에 대한 링크가 포함되어 있습니다.

주제

작업

다음 코드 예시에서는 Confirm-CPJob을 사용하는 방법을 보여 줍니다.

for PowerShell 도구

예제 1:이 예제는 지정된 작업의 상태를 가져옵니다.

Confirm-CPJob -JobId f570dc12-5ef3-44bc-945a-6e133EXAMPLE -Nonce 3

출력:

Value
-----
InProgress

  • API 세부 정보는 AWS Tools for PowerShell Cmdlet 참조의 AcknowledgeJob를 참조하세요.

다음 코드 예시에서는 Disable-CPStageTransition을 사용하는 방법을 보여 줍니다.

for PowerShell 도구

예제 1:이 예제는 지정된 파이프라인의 지정된 단계에 대한 인바운드 전환을 비활성화합니다.

Disable-CPStageTransition -PipelineName CodePipelineDemo -Reason "Disabling temporarily." -StageName Beta -TransitionType Inbound

다음 코드 예시에서는 Enable-CPStageTransition을 사용하는 방법을 보여 줍니다.

for PowerShell 도구

예제 1:이 예제에서는 지정된 파이프라인의 지정된 단계에 대한 인바운드 전환을 활성화합니다.

Enable-CPStageTransition -PipelineName CodePipelineDemo -StageName Beta -TransitionType Inbound

  • API 세부 정보는 AWS Tools for PowerShell Cmdlet 참조의 EnableStageTransition를 참조하세요.

다음 코드 예시에서는 Get-CPActionType을 사용하는 방법을 보여 줍니다.

for PowerShell 도구

예제 1:이 예제는 지정된 소유자에 대해 사용 가능한 모든 작업에 대한 정보를 가져옵니다.

ForEach ($actionType in (Get-CPActionType -ActionOwnerFilter AWS)) {
  Write-Output ("For Category = " + $actionType.Id.Category + ", Owner = " + $actionType.Id.Owner + ", Provider = " + $actionType.Id.Provider + ", Version = " + $actionType.Id.Version + ":")
  Write-Output ("  ActionConfigurationProperties:")
  ForEach ($acp in $actionType.ActionConfigurationProperties) {
    Write-Output ("    For " + $acp.Name + ":")
    Write-Output ("      Description = " + $acp.Description)
    Write-Output ("      Key = " + $acp.Key)
    Write-Output ("      Queryable = " + $acp.Queryable)
    Write-Output ("      Required = " + $acp.Required)
    Write-Output ("      Secret = " + $acp.Secret)
  }
  Write-Output ("  InputArtifactDetails:")
  Write-Output ("    MaximumCount = " + $actionType.InputArtifactDetails.MaximumCount)
  Write-Output ("    MinimumCount = " + $actionType.InputArtifactDetails.MinimumCount)
  Write-Output ("  OutputArtifactDetails:")
  Write-Output ("    MaximumCount = " + $actionType.OutputArtifactDetails.MaximumCount)
  Write-Output ("    MinimumCount = " + $actionType.OutputArtifactDetails.MinimumCount)
  Write-Output ("  Settings:")
  Write-Output ("    EntityUrlTemplate = " + $actionType.Settings.EntityUrlTemplate)
  Write-Output ("    ExecutionUrlTemplate = " + $actionType.Settings.ExecutionUrlTemplate)
}

출력:

For Category = Deploy, Owner = AWS, Provider = ElasticBeanstalk, Version = 1:
  ActionConfigurationProperties:
    For ApplicationName:
      Description = The AWS Elastic Beanstalk Application name
      Key = True
      Queryable = False
      Required = True
      Secret = False
    For EnvironmentName:
      Description = The AWS Elastic Beanstalk Environment name
      Key = True
      Queryable = False
      Required = True
      Secret = False
  InputArtifactDetails:
    MaximumCount = 1
    MinimumCount = 1
  OutputArtifactDetails:
    MaximumCount = 0
    MinimumCount = 0
  Settings:
    EntityUrlTemplate = https://console.aws.amazon.com/elasticbeanstalk/r/application/{Config:ApplicationName}
    ExecutionUrlTemplate = https://console.aws.amazon.com/elasticbeanstalk/r/application/{Config:ApplicationName} 
For Category = Deploy, Owner = AWS, Provider = CodeDeploy, Version = 1:
  ActionConfigurationProperties:
    For ApplicationName:
      Description = The AWS CodeDeploy Application name
      Key = True
      Queryable = False
      Required = True
      Secret = False
    For DeploymentGroupName:
      Description = The AWS CodeDeploy Deployment Group name
      Key = True
      Queryable = False
      Required = True
      Secret = False
  InputArtifactDetails:
    MaximumCount = 1
    MinimumCount = 1
  OutputArtifactDetails:
    MaximumCount = 0
    MinimumCount = 0
  Settings:
    EntityUrlTemplate = https://console.aws.amazon.com/codedeploy/home?#/applications/{Config:ApplicationName}/deployment-groups/{Config:DeploymentGroupName}
    ExecutionUrlTemplate = https://console.aws.amazon.com/codedeploy/home?#/deployments/{ExternalExecutionId}

  • API 세부 정보는 AWS Tools for PowerShell Cmdlet 참조의 ListActionTypes를 참조하세요.

다음 코드 예시에서는 Get-CPActionableJobList을 사용하는 방법을 보여 줍니다.

for PowerShell 도구

예제 1:이 예제에서는 지정된 작업 범주, 소유자, 공급자, 버전 및 쿼리 파라미터에 대해 실행 가능한 모든 작업에 대한 정보를 가져옵니다.

Get-CPActionableJobList -ActionTypeId_Category Build -ActionTypeId_Owner Custom -ActionTypeId_Provider MyCustomProviderName -ActionTypeId_Version 1 -QueryParam @{"ProjectName" = "MyProjectName"}

출력:

AccountId       Data                                 Id                                      Nonce
---------       ----                                 --                                      -----
80398EXAMPLE    Amazon.CodePipeline.Model.JobData    0de392f5-712d-4f41-ace3-f57a0EXAMPLE    3

  • API 세부 정보는 AWS Tools for PowerShell Cmdlet 참조의 PollForJobs를 참조하세요.

다음 코드 예시에서는 Get-CPJobDetail을 사용하는 방법을 보여 줍니다.

for PowerShell 도구

예제 1:이 예제는 지정된 작업에 대한 일반적인 정보를 가져옵니다.

Get-CPJobDetail -JobId f570dc12-5ef3-44bc-945a-6e133EXAMPLE

출력:

AccountId       Data                                 Id
---------       ----                                 --
80398EXAMPLE    Amazon.CodePipeline.Model.JobData    f570dc12-5ef3-44bc-945a-6e133EXAMPLE

예제 2:이 예제에서는 지정된 작업에 대한 자세한 정보를 가져옵니다.

$jobDetails = Get-CPJobDetail -JobId f570dc12-5ef3-44bc-945a-6e133EXAMPLE
Write-Output ("For Job " + $jobDetails.Id + ":")
Write-Output ("  AccountId = " + $jobDetails.AccountId)
$jobData = $jobDetails.Data
Write-Output ("  Configuration:")
ForEach ($key in $jobData.ActionConfiguration.Keys) {
  $value = $jobData.ActionConfiguration.$key
  Write-Output ("    " + $key + " = " + $value)
}
Write-Output ("  ActionTypeId:")
Write-Output ("    Category = " + $jobData.ActionTypeId.Category)
Write-Output ("    Owner = " + $jobData.ActionTypeId.Owner)
Write-Output ("    Provider = " + $jobData.ActionTypeId.Provider)
Write-Output ("    Version = " + $jobData.ActionTypeId.Version)
Write-Output ("  ArtifactCredentials:")
Write-Output ("    AccessKeyId = " + $jobData.ArtifactCredentials.AccessKeyId)
Write-Output ("    SecretAccessKey = " + $jobData.ArtifactCredentials.SecretAccessKey)
Write-Output ("    SessionToken = " + $jobData.ArtifactCredentials.SessionToken)
Write-Output ("  InputArtifacts:")
ForEach ($ia in $jobData.InputArtifacts) {
  Write-Output ("    " + $ia.Name)
}
Write-Output ("  OutputArtifacts:")
ForEach ($oa in $jobData.OutputArtifacts) {
  Write-Output ("    " + $oa.Name)
}
Write-Output ("  PipelineContext:")
$context = $jobData.PipelineContext
Write-Output ("    Name = " + $context.Action.Name)
Write-Output ("    PipelineName = " + $context.PipelineName)
Write-Output ("    Stage = " + $context.Stage.Name)

출력:

For Job f570dc12-5ef3-44bc-945a-6e133EXAMPLE:
  AccountId = 80398EXAMPLE
  Configuration:
  ActionTypeId:
    Category = Build
    Owner = Custom
    Provider = MyCustomProviderName
    Version = 1
  ArtifactCredentials:
    AccessKeyId = ASIAIEI3...IXI6YREX
    SecretAccessKey = cqAFDhEi...RdQyfa2u
    SessionToken = AQoDYXdz...5u+lsAU=
  InputArtifacts:
    MyApp
  OutputArtifacts:
    MyAppBuild
  PipelineContext:
    Name = Build
    PipelineName = CodePipelineDemo
    Stage = Build

  • API 세부 정보는 AWS Tools for PowerShell Cmdlet 참조의 GetJobDetails를 참조하세요.

다음 코드 예시에서는 Get-CPPipeline을 사용하는 방법을 보여 줍니다.

for PowerShell 도구

예제 1:이 예제는 지정된 파이프라인에 대한 일반적인 정보를 가져옵니다.

Get-CPPipeline -Name CodePipelineDemo -Version 1

출력:

ArtifactStore : Amazon.CodePipeline.Model.ArtifactStore
Name          : CodePipelineDemo
RoleArn       : arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole
Stages        : {Source, Build, Beta, TestStage}
Version       : 1

예제 2:이 예제에서는 지정된 파이프라인에 대한 자세한 정보를 가져옵니다.

$pipeline = Get-CPPipeline -Name CodePipelineDemo
Write-Output ("Name = " + $pipeline.Name)
Write-Output ("RoleArn = " + $pipeline.RoleArn)
Write-Output ("Version = " + $pipeline.Version)
Write-Output ("ArtifactStore:")
Write-Output ("  Location = " + $pipeline.ArtifactStore.Location)
Write-Output ("  Type = " + $pipeline.ArtifactStore.Type.Value)
Write-Output ("Stages:")
ForEach ($stage in $pipeline.Stages) {
  Write-Output ("  Name = " + $stage.Name)
  Write-Output ("    Actions:")
  ForEach ($action in $stage.Actions) {
    Write-Output ("      Name = " + $action.Name)
	Write-Output ("        Category = " + $action.ActionTypeId.Category)
	Write-Output ("        Owner = " + $action.ActionTypeId.Owner)
	Write-Output ("        Provider = " + $action.ActionTypeId.Provider)
	Write-Output ("        Version = " + $action.ActionTypeId.Version)
	Write-Output ("        Configuration:")
	ForEach ($key in $action.Configuration.Keys) {
	  $value = $action.Configuration.$key
	  Write-Output ("          " + $key + " = " + $value)
	}
	Write-Output ("        InputArtifacts:")
	ForEach ($ia in $action.InputArtifacts) {
	  Write-Output ("          " + $ia.Name)
	}
	ForEach ($oa in $action.OutputArtifacts) {
	  Write-Output ("          " + $oa.Name)
	}
	Write-Output ("        RunOrder = " + $action.RunOrder)
  }
}

출력:

Name = CodePipelineDemo
RoleArn = arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole
Version = 3
ArtifactStore:
  Location = MyBucketName
  Type = S3
Stages:
  Name = Source
    Actions:
      Name = Source
        Category = Source
        Owner = ThirdParty
        Provider = GitHub
        Version = 1
        Configuration:
          Branch = master
          OAuthToken = ****
          Owner = my-user-name
          Repo = MyRepoName
        InputArtifacts:
          MyApp
        RunOrder = 1
  Name = Build
    Actions:
      Name = Build
        Category = Build
        Owner = Custom
        Provider = MyCustomProviderName
        Version = 1
        Configuration:
          ProjectName = MyProjectName
        InputArtifacts:
          MyApp
          MyAppBuild
        RunOrder = 1
  Name = Beta
    Actions:
      Name = CodePipelineDemoFleet
        Category = Deploy
        Owner = AWS
        Provider = CodeDeploy
        Version = 1
        Configuration:
          ApplicationName = CodePipelineDemoApplication
          DeploymentGroupName = CodePipelineDemoFleet
        InputArtifacts:
          MyAppBuild
        RunOrder = 1
  Name = TestStage
    Actions:
      Name = MyJenkinsTestAction
        Category = Test
        Owner = Custom
        Provider = MyCustomTestProvider
        Version = 1
        Configuration:
          ProjectName = MyJenkinsProjectName
        InputArtifacts:
          MyAppBuild
        RunOrder = 1

  • API 세부 정보는 AWS Tools for PowerShell Cmdlet 참조의 GetPipeline를 참조하세요.

다음 코드 예시에서는 Get-CPPipelineList을 사용하는 방법을 보여 줍니다.

for PowerShell 도구

예제 1:이 예제는 사용 가능한 파이프라인 목록을 가져옵니다.

Get-CPPipelineList

출력:

Created                  Name                Updated                  Version
-------                  ----                -------                  -------
8/13/2015 10:17:54 PM    CodePipelineDemo    8/13/2015 10:17:54 PM    3
7/8/2015 2:41:53 AM      MyFirstPipeline     7/22/2015 9:06:37 PM     7

  • API 세부 정보는 AWS Tools for PowerShell Cmdlet 참조의 ListPipelines를 참조하세요.

다음 코드 예시에서는 Get-CPPipelineState을 사용하는 방법을 보여 줍니다.

for PowerShell 도구

예제 1:이 예제에서는 지정된 파이프라인의 단계에 대한 일반적인 정보를 가져옵니다.

Get-CPPipelineState -Name CodePipelineDemo

출력:

Created         : 8/13/2015 10:17:54 PM
PipelineName    : CodePipelineDemo
PipelineVersion : 1
StageStates     : {Source, Build, Beta, TestStage}
Updated         : 8/13/2015 10:17:54 PM

예제 2:이 예제에서는 지정된 파이프라인의 상태에 대한 자세한 정보를 가져옵니다.

ForEach ($stageState in (Get-CPPipelineState -Name $arg).StageStates) {
  Write-Output ("For " + $stageState.StageName + ":")
  Write-Output ("  InboundTransitionState:")
  Write-Output ("    DisabledReason = " + $stageState.InboundTransitionState.DisabledReason)
  Write-Output ("    Enabled = " + $stageState.InboundTransitionState.Enabled)
  Write-Output ("    LastChangedAt = " + $stageState.InboundTransitionState.LastChangedAt)
  Write-Output ("    LastChangedBy = " + $stageState.InboundTransitionState.LastChangedBy)
  Write-Output ("  ActionStates:")
  ForEach ($actionState in $stageState.ActionStates) {
    Write-Output ("    For " + $actionState.ActionName + ":")
	Write-Output ("      CurrentRevision:")
    Write-Output ("        Created = " + $actionState.CurrentRevision.Created)
	Write-Output ("        RevisionChangeId = " + $actionState.CurrentRevision.RevisionChangeId)
	Write-Output ("        RevisionId = " + $actionState.CurrentRevision.RevisionId)
	Write-Output ("      EntityUrl = " + $actionState.EntityUrl)
	Write-Output ("      LatestExecution:")
    Write-Output ("        ErrorDetails:")
    Write-Output ("          Code = " + $actionState.LatestExecution.ErrorDetails.Code)
	Write-Output ("          Message = " + $actionState.LatestExecution.ErrorDetails.Message)
	Write-Output ("        ExternalExecutionId = " + $actionState.LatestExecution.ExternalExecutionId)
	Write-Output ("        ExternalExecutionUrl = " + $actionState.LatestExecution.ExternalExecutionUrl)
	Write-Output ("        LastStatusChange	= " + $actionState.LatestExecution.LastStatusChange)
	Write-Output ("        PercentComplete = " + $actionState.LatestExecution.PercentComplete)
	Write-Output ("        Status = " + $actionState.LatestExecution.Status)
	Write-Output ("        Summary = " + $actionState.LatestExecution.Summary)
	Write-Output ("      RevisionUrl = " + $actionState.RevisionUrl)
  }
}

출력:

For Source:
  InboundTransitionState:
    DisabledReason =
    Enabled =
    LastChangedAt =
    LastChangedBy =
  ActionStates:
    For Source:
      CurrentRevision:
        Created =
        RevisionChangeId =
        RevisionId =
      EntityUrl = https://github.com/my-user-name/MyRepoName/tree/master
      LatestExecution:
        ErrorDetails:
          Code =
          Message =
        ExternalExecutionId =
        ExternalExecutionUrl =
        LastStatusChange = 07/20/2015 23:28:45
        PercentComplete = 0
        Status = Succeeded
        Summary =
      RevisionUrl =
For Build:
  InboundTransitionState:
    DisabledReason =
    Enabled = True
    LastChangedAt = 01/01/0001 00:00:00
    LastChangedBy =
  ActionStates:
    For Build:
      CurrentRevision:
        Created =
        RevisionChangeId =
        RevisionId =
      EntityUrl = http://54.174.131.1EX/job/MyJenkinsDemo
      LatestExecution:
        ErrorDetails:
          Code = TimeoutError
          Message = The action failed because a job worker exceeded its time limit. If this is a custom action, make sure that the job worker is configured correctly.
        ExternalExecutionId =
        ExternalExecutionUrl =
        LastStatusChange = 07/21/2015 00:29:29
        PercentComplete = 0
        Status = Failed
        Summary =
      RevisionUrl =
For Beta:
  InboundTransitionState:
    DisabledReason =
    Enabled = True
    LastChangedAt = 01/01/0001 00:00:00
    LastChangedBy =
  ActionStates:
    For CodePipelineDemoFleet:
      CurrentRevision:
        Created =
        RevisionChangeId =
        RevisionId =
      EntityUrl = https://console.aws.amazon.com/codedeploy/home?#/applications/CodePipelineDemoApplication/deployment-groups/CodePipelineDemoFleet
      LatestExecution:
        ErrorDetails:
          Code =
          Message =
        ExternalExecutionId = d-D5LTCZXEX
        ExternalExecutionUrl = https://console.aws.amazon.com/codedeploy/home?#/deployments/d-D5LTCZXEX
        LastStatusChange = 07/08/2015 22:07:42
        PercentComplete = 0
        Status = Succeeded
        Summary = Deployment Succeeded
      RevisionUrl =
For TestStage:
  InboundTransitionState:
    DisabledReason =
    Enabled = True
    LastChangedAt = 01/01/0001 00:00:00
    LastChangedBy =
  ActionStates:
    For MyJenkinsTestAction25:
      CurrentRevision:
        Created =
        RevisionChangeId =
        RevisionId =
      EntityUrl = http://54.174.131.1EX/job/MyJenkinsDemo
      LatestExecution:
        ErrorDetails:
          Code =
          Message =
        ExternalExecutionId = 5
        ExternalExecutionUrl = http://54.174.131.1EX/job/MyJenkinsDemo/5
        LastStatusChange = 07/08/2015 22:09:03
        PercentComplete = 0
        Status = Succeeded
        Summary = Finished
      RevisionUrl =

  • API 세부 정보는 AWS Tools for PowerShell Cmdlet 참조의 GetPipelineState를 참조하세요.

다음 코드 예시에서는 New-CPCustomActionType을 사용하는 방법을 보여 줍니다.

for PowerShell 도구

예제 1:이 예제에서는 지정된 속성을 사용하여 새 사용자 지정 작업을 생성합니다.

New-CPCustomActionType -Category Build -ConfigurationProperty @{"Description" = "The name of the build project must be provided when this action is added to the pipeline."; "Key" = $True; "Name" = "ProjectName"; "Queryable" = $False; "Required" = $True; "Secret" = $False; "Type" = "String"} -Settings_EntityUrlTemplate "https://my-build-instance/job/{Config:ProjectName}/" -Settings_ExecutionUrlTemplate "https://my-build-instance/job/mybuildjob/lastSuccessfulBuild{ExternalExecutionId}/" -InputArtifactDetails_MaximumCount 1 -OutputArtifactDetails_MaximumCount 1 -InputArtifactDetails_MinimumCount 0 -OutputArtifactDetails_MinimumCount 0 -Provider "MyBuildProviderName" -Version 1

출력:

ActionConfigurationProperties : {ProjectName}
Id                            : Amazon.CodePipeline.Model.ActionTypeId
InputArtifactDetails          : Amazon.CodePipeline.Model.ArtifactDetails
OutputArtifactDetails         : Amazon.CodePipeline.Model.ArtifactDetails
Settings                      : Amazon.CodePipeline.Model.ActionTypeSettings

다음 코드 예시에서는 New-CPPipeline을 사용하는 방법을 보여 줍니다.

for PowerShell 도구

예제 1:이 예제는 지정된 설정으로 새 파이프라인을 생성합니다.

$pipeline = New-Object Amazon.CodePipeline.Model.PipelineDeclaration

$sourceStageAction = New-Object Amazon.CodePipeline.Model.ActionDeclaration
$deployStageAction = New-Object Amazon.CodePipeline.Model.ActionDeclaration

$sourceStageActionOutputArtifact = New-Object Amazon.CodePipeline.Model.OutputArtifact
$sourceStageActionOutputArtifact.Name = "MyApp"

$sourceStageAction.ActionTypeId = @{"Category" = "Source"; "Owner" = "AWS"; "Provider" = "S3"; "Version" = 1}
$sourceStageAction.Configuration.Add("S3Bucket", "amzn-s3-demo-bucket")
$sourceStageAction.Configuration.Add("S3ObjectKey", "my-object-key-name.zip")
$sourceStageAction.OutputArtifacts.Add($sourceStageActionOutputArtifact)
$sourceStageAction.Name = "Source"

$deployStageActionInputArtifact = New-Object Amazon.CodePipeline.Model.InputArtifact
$deployStageActionInputArtifact.Name = "MyApp"

$deployStageAction.ActionTypeId = @{"Category" = "Deploy"; "Owner" = "AWS"; "Provider" = "CodeDeploy"; "Version" = 1}
$deployStageAction.Configuration.Add("ApplicationName", "CodePipelineDemoApplication")
$deployStageAction.Configuration.Add("DeploymentGroupName", "CodePipelineDemoFleet")
$deployStageAction.InputArtifacts.Add($deployStageActionInputArtifact)
$deployStageAction.Name = "CodePipelineDemoFleet"

$sourceStage = New-Object Amazon.CodePipeline.Model.StageDeclaration
$deployStage = New-Object Amazon.CodePipeline.Model.StageDeclaration

$sourceStage.Name = "Source"
$deployStage.Name = "Beta"

$sourceStage.Actions.Add($sourceStageAction)
$deployStage.Actions.Add($deployStageAction)

$pipeline.ArtifactStore = @{"Location" = "amzn-s3-demo-bucket"; "Type" = "S3"}
$pipeline.Name = "CodePipelineDemo"
$pipeline.RoleArn = "arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole"
$pipeline.Stages.Add($sourceStage)
$pipeline.Stages.Add($deployStage)
$pipeline.Version = 1

New-CPPipeline -Pipeline $pipeline

출력:

ArtifactStore : Amazon.CodePipeline.Model.ArtifactStore
Name          : CodePipelineDemo
RoleArn       : arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole
Stages        : {Source, Beta}
Version       : 1

  • API 세부 정보는 AWS Tools for PowerShell Cmdlet 참조의 CreatePipeline를 참조하세요.

다음 코드 예시에서는 Remove-CPCustomActionType을 사용하는 방법을 보여 줍니다.

for PowerShell 도구

예제 1:이 예제는 지정된 사용자 지정 작업을 삭제합니다. 명령을 실행하면 계속 진행하기 전에 확인하라는 메시지가 표시됩니다. -Force 파라미터를 추가하여 프롬프트 없이 사용자 지정 작업을 삭제합니다.

Remove-CPCustomActionType -Category Build -Provider MyBuildProviderName -Version 1

다음 코드 예시에서는 Remove-CPPipeline을 사용하는 방법을 보여 줍니다.

for PowerShell 도구

예제 1:이 예제는 지정된 파이프라인을 삭제합니다. 명령을 실행하면 계속 진행하기 전에 확인하라는 메시지가 표시됩니다. -Force 파라미터를 추가하여 프롬프트 없이 파이프라인을 삭제합니다.

Remove-CPPipeline -Name CodePipelineDemo

  • API 세부 정보는 AWS Tools for PowerShell Cmdlet 참조의 DeletePipeline를 참조하세요.

다음 코드 예시에서는 Start-CPPipelineExecution을 사용하는 방법을 보여 줍니다.

for PowerShell 도구

예제 1:이 예제는 지정된 파이프라인 실행을 시작합니다.

Start-CPPipelineExecution -Name CodePipelineDemo

다음 코드 예시에서는 Update-CPPipeline을 사용하는 방법을 보여 줍니다.

for PowerShell 도구

예제 1:이 예제는 지정된 기존 파이프라인을 지정된 설정으로 업데이트합니다.

$pipeline = New-Object Amazon.CodePipeline.Model.PipelineDeclaration

$sourceStageAction = New-Object Amazon.CodePipeline.Model.ActionDeclaration
$deployStageAction = New-Object Amazon.CodePipeline.Model.ActionDeclaration

$sourceStageActionOutputArtifact = New-Object Amazon.CodePipeline.Model.OutputArtifact
$sourceStageActionOutputArtifact.Name = "MyApp"

$sourceStageAction.ActionTypeId = @{"Category" = "Source"; "Owner" = "AWS"; "Provider" = "S3"; "Version" = 1}
$sourceStageAction.Configuration.Add("S3Bucket", "amzn-s3-demo-bucket")
$sourceStageAction.Configuration.Add("S3ObjectKey", "my-object-key-name.zip")
$sourceStageAction.OutputArtifacts.Add($sourceStageActionOutputArtifact)
$sourceStageAction.Name = "Source"

$deployStageActionInputArtifact = New-Object Amazon.CodePipeline.Model.InputArtifact
$deployStageActionInputArtifact.Name = "MyApp"

$deployStageAction.ActionTypeId = @{"Category" = "Deploy"; "Owner" = "AWS"; "Provider" = "CodeDeploy"; "Version" = 1}
$deployStageAction.Configuration.Add("ApplicationName", "CodePipelineDemoApplication")
$deployStageAction.Configuration.Add("DeploymentGroupName", "CodePipelineDemoFleet")
$deployStageAction.InputArtifacts.Add($deployStageActionInputArtifact)
$deployStageAction.Name = "CodePipelineDemoFleet"

$sourceStage = New-Object Amazon.CodePipeline.Model.StageDeclaration
$deployStage = New-Object Amazon.CodePipeline.Model.StageDeclaration

$sourceStage.Name = "MyInputFiles"
$deployStage.Name = "MyTestDeployment"

$sourceStage.Actions.Add($sourceStageAction)
$deployStage.Actions.Add($deployStageAction)

$pipeline.ArtifactStore = @{"Location" = "amzn-s3-demo-bucket"; "Type" = "S3"}
$pipeline.Name = "CodePipelineDemo"
$pipeline.RoleArn = "arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole"
$pipeline.Stages.Add($sourceStage)
$pipeline.Stages.Add($deployStage)
$pipeline.Version = 1

Update-CPPipeline -Pipeline $pipeline

출력:

ArtifactStore : Amazon.CodePipeline.Model.ArtifactStore
Name          : CodePipelineDemo
RoleArn       : arn:aws:iam::80398EXAMPLE:role/CodePipelineServiceRole
Stages        : {InputFiles, TestDeployment}
Version       : 2

  • API 세부 정보는 AWS Tools for PowerShell Cmdlet 참조의 UpdatePipeline를 참조하세요.