HLS output group to MediaPackage v2 - MediaLive

HLS output group to MediaPackage v2

Follow this procedure if you determined that you will create an HLS output group, and will send to MediaPackage v2. You and the operator of the downstream system must agree about the destination for the output of the HLS output group.

To arrange setup of the destination

  1. Ask the MediaPackage user to create one channel on MediaPackage. Even if the MediaLive channel is a standard channel (with two pipelines), you need only one MediaPackage channel.

  2. Obtain the two URLs (input endpoints is the MediaPackage terminology) for the channel. The two URLs for a channel look like this:

    https://mz82o4-1.ingest.hnycui.mediapackagev2.us-west-2.amazonaws.com/in/v1/live-sports/1/curling/index

    https://mz82o4-2.ingest.hnycui.mediapackagev2.us-west-2.amazonaws.com/in/v1/live-sports/2/curling/index

    The two URLs are slightly different, as shown in the examples above.

    Make sure that you obtain the URLs (which start with https://), not the channel name (which starts with arn).

    Note that you don't use user credentials in order to send to MediaPackage v2.