Create a Puppet Enterprise Master

Sign in to the AWS Management Console and open the AWS OpsWorks console at https://console.aws.amazon.com/opsworks/.

On the AWS OpsWorks home page, choose Go to OpsWorks for Puppet Enterprise.

On the OpsWorks for Puppet Enterprise home page, choose Create Puppet Enterprise server.

On the Set name, region, and type page, specify a name for your server. Puppet master names can be a maximum of 40 characters, must start with a letter, and can contain only alphanumeric characters and dashes. Select a supported region, and then choose an instance type that supports the number of nodes that you want to manage. You can change the instance type after your server has been created, if needed. For this walkthrough, we are creating a m5.xlarge instance type in the US West (Oregon) Region. Choose Next.

On the Configure server page, leave the default selection in the SSH key drop-down list, unless you want to specify a key pair name. In the r10k remote field of the Configure Puppet Code Manager area, specify a valid SSH or HTTPS URL of your Git remote. In the r10k private key field, paste in the SSH private key that AWS OpsWorks can use to access the r10k remote repository. This is provided by Git when you create a private repository, but not required if you are using HTTPS authentication to access your control repository. Choose Next.

For Specify server endpoint, leave the default, Use an automatically-generated endpoint and then choose Next, unless you want your server on a custom domain of your own. To configure a custom domain, go on to the next step.

To use a custom domain, for Specify server endpoint, choose Use a custom domain from the drop-down list.

1. For Fully qualified domain name (FQDN), specify an FQDN. You must own the domain name that you want to use.

2. For SSL certificate, paste in the entire PEM-formatted certificate, beginning with –––--BEGIN CERTIFICATE----- and ending with –––--END CERTIFICATE-----. The SSL certificate subject must match the FQDN you entered in the preceding step. Remove any extra lines before and after the certificate.

3. For SSL private key, paste in the entire RSA private key, beginning with –––--BEGIN RSA PRIVATE KEY----- and ending with –––--END RSA PRIVATE KEY-----. The SSL private key must match the public key in the SSL certificate that you entered in the preceding step. Remove any extra lines before and after the private key. Choose Next.

On the Configure advanced settings page, in the Network and security area, choose a VPC, subnet, and one or more security groups. AWS OpsWorks can generate a security group, service role, and instance profile for you, if you do not already have ones that you want to use. Your server can be a member of multiple security groups. You cannot change network and security settings for the Puppet master after you have left this page.

In the System maintenance section, set the day and hour that you want system maintenance to begin. Because you should expect the server to be offline during system maintenance, choose a time of low server demand within regular office hours.

The maintenance window is required. You can change the start day and time later by using the AWS Management Console, AWS CLI, or the APIs.

Configure backups. By default, automatic backups are enabled. Set a preferred frequency and hour for automatic backup to start, and set the number of backup generations to store in Amazon Simple Storage Service. A maximum of 30 backups can be kept; when the maximum is reached, OpsWorks for Puppet Enterprise deletes the oldest backups to make room for new ones.

(Optional) In Tags, add tags to the server and related resources, such as the EC2 instance, Elastic IP address, security group, S3 bucket, and backups. For more information about tagging an OpsWorks for Puppet Enterprise server, see Working with Tags on AWS OpsWorks for Puppet Enterprise Resources.

When you are finished configuring advanced settings, choose Next.

On the Review page, review your choices. When you are ready to create the server, choose Launch.

While you are waiting for AWS OpsWorks to create your Puppet master, go on to Configure the Puppet Master Using the Starter Kit and download the Starter Kit and the Puppet Enterprise console credentials. Do not wait until your server is online to download these items.

When server creation is finished, your Puppet master is available on the OpsWorks for Puppet Enterprise home page, with a status of online. After the server is online, the Puppet Enterprise console is available on the server's domain, at a URL in the following format: https://your_server_name-randomID.region.opsworks-cm.io.

Be sure to complete the Prerequisites. To create your Puppet master, you need a subnet ID, so you must have a VPC.

Create a service role and an instance profile. AWS OpsWorks provides an AWS CloudFormation template that you can use to create both. Run the following AWS CLI command to create an AWS CloudFormation stack that creates the service role and instance profile for you.

aws cloudformation create-stack --stack-name OpsWorksCMRoles --template-url https://s3.amazonaws.com/opsworks-cm-us-east-1-prod-default-assets/misc/opsworks-cm-roles.yaml --capabilities CAPABILITY_NAMED_IAM

After AWS CloudFormation finishes creating the stack, find and copy the ARNs of service roles in your account.

aws iam list-roles --path-prefix "/service-role/" --no-paginate

In the results of the list-roles command, look for service role ARN entries that resemble the following. Make a note of the service role ARNs. You need these values to create your Puppet Enterprise master.

{
    "AssumeRolePolicyDocument": {
        "Version": "2012-10-17",
        "Statement": [
            {
                "Action": "sts:AssumeRole",
                "Effect": "Allow",
                "Principal": {
                    "Service": "ec2.amazonaws.com"
                }
            }
        ]
    },
    "RoleId": "AROZZZZZZZZZZQG6R22HC",
    "CreateDate": "2018-01-05T20:42:20Z",
    "RoleName": "aws-opsworks-cm-ec2-role",
    "Path": "/service-role/",
    "Arn": "arn:aws:iam::000000000000:role/service-role/aws-opsworks-cm-ec2-role"
},
{
    "AssumeRolePolicyDocument": {
        "Version": "2012-10-17",
        "Statement": [
            {
                "Action": "sts:AssumeRole",
                "Effect": "Allow",
                "Principal": {
                    "Service": "opsworks-cm.amazonaws.com"
                }
            }
        ]
    },
    "RoleId": "AROZZZZZZZZZZZZZZZ6QE",
    "CreateDate": "2018-01-05T20:42:20Z",
    "RoleName": "aws-opsworks-cm-service-role",
    "Path": "/service-role/",
    "Arn": "arn:aws:iam::000000000000:role/service-role/aws-opsworks-cm-service-role"
}

Find and copy the ARNs of instance profiles in your account.

aws iam list-instance-profiles --no-paginate

In the results of the list-instance-profiles command, look for instance profile ARN entries that resemble the following. Make a note of the instance profile ARNs. You need these values to create your Puppet Enterprise master.

{
    "Path": "/",
    "InstanceProfileName": "aws-opsworks-cm-ec2-role",
    "InstanceProfileId": "EXAMPLEDC6UR3LTUW7VHK",
    "Arn": "arn:aws:iam::123456789012:instance-profile/aws-opsworks-cm-ec2-role",
    "CreateDate": "2017-01-05T20:42:20Z",
    "Roles": [
        {
            "Path": "/service-role/",
            "RoleName": "aws-opsworks-cm-ec2-role",
            "RoleId": "EXAMPLEE4STNUQG6R22HC",
            "Arn": "arn:aws:iam::123456789012:role/service-role/aws-opsworks-cm-ec2-role",
            "CreateDate": "2017-01-05T20:42:20Z",
            "AssumeRolePolicyDocument": {
                "Version": "2012-10-17",
                "Statement": [
                    {
                        "Effect": "Allow",
                        "Principal": {
                            "Service": "ec2.amazonaws.com"
                        },
                        "Action": "sts:AssumeRole"
                    }
                ]
            }
        }
    ]
},

Create the OpsWorks for Puppet Enterprise master by running the create-server command.

aws opsworks-cm create-server --engine "Puppet" --engine-model "Monolithic" --engine-version "2019" --server-name "server_name" --instance-profile-arn "instance_profile_ARN" --instance-type "instance_type" --engine-attributes '{"PUPPET_ADMIN_PASSWORD":"ASCII_password"}' --key-pair "key_pair_name" --preferred-maintenance-window "ddd:hh:mm" --preferred-backup-window "ddd:hh:mm" --security-group-ids security_group_id1 security_group_id2 --service-role-arn "service_role_ARN" --subnet-ids subnet_ID

The following is an example.

aws opsworks-cm create-server --engine "Puppet" --engine-model "Monolithic" --engine-version "2019" --server-name "puppet-02" --instance-profile-arn "arn:aws:iam::111122223333:instance-profile/aws-opsworks-cm-ec2-role" --instance-type "m5.xlarge" --engine-attributes '{"PUPPET_ADMIN_PASSWORD":"zZZzDj2DLYXSZFRv1d"}' --key-pair "amazon-test" --preferred-maintenance-window "Mon:08:00" --preferred-backup-window "Sun:02:00" --security-group-ids sg-b00000001 sg-b0000008 --service-role-arn "arn:aws:iam::111122223333:role/service-role/aws-opsworks-cm-service-role" --subnet-ids subnet-383daa71

The following example creates a Puppet master that uses a custom domain.

aws opsworks-cm create-server \
    --engine "Puppet" \
    --engine-model "Monolithic" \
    --engine-version "2019" \
    --server-name "puppet-02" \
    --instance-profile-arn "arn:aws:iam::111122223333:instance-profile/aws-opsworks-cm-ec2-role" \
    --instance-type "m5.xlarge" \
    --engine-attributes '{"PUPPET_ADMIN_PASSWORD":"zZZzDj2DLYXSZFRv1d"}' \
    --custom-domain "my-puppet-master.my-corp.com" \
    --custom-certificate "-----BEGIN CERTIFICATE----- EXAMPLEqEXAMPLE== -----END CERTIFICATE-----" \
    --custom-private-key "-----BEGIN RSA PRIVATE KEY----- EXAMPLEqEXAMPLE= -----END RSA PRIVATE KEY-----" \
    --key-pair "amazon-test" 
    --preferred-maintenance-window "Mon:08:00" \
    --preferred-backup-window "Sun:02:00" \
    --security-group-ids sg-b00000001 sg-b0000008 \
    --service-role-arn "arn:aws:iam::111122223333:role/service-role/aws-opsworks-cm-service-role" \
    --subnet-ids subnet-383daa71

The following example creates a Puppet master that adds two tags: Stage: Production and Department: Marketing. For more information about adding and managing tags on OpsWorks for Puppet Enterprise servers, see Working with Tags on AWS OpsWorks for Puppet Enterprise Resources in this guide.

aws opsworks-cm create-server \
    --engine "Puppet" \
    --engine-model "Monolithic" \
    --engine-version "2019" \
    --server-name "puppet-02" \
    --instance-profile-arn "arn:aws:iam::111122223333:instance-profile/aws-opsworks-cm-ec2-role" \
    --instance-type "m5.xlarge" \
    --engine-attributes '{"PUPPET_ADMIN_PASSWORD":"zZZzDj2DLYXSZFRv1d"}' \
    --key-pair "amazon-test" 
    --preferred-maintenance-window "Mon:08:00" \
    --preferred-backup-window "Sun:02:00" \
    --security-group-ids sg-b00000001 sg-b0000008 \
    --service-role-arn "arn:aws:iam::111122223333:role/service-role/aws-opsworks-cm-service-role" \
    --subnet-ids subnet-383daa71 \
    --tags [{\"Key\":\"Stage\",\"Value\":\"Production\"},{\"Key\":\"Department\",\"Value\":\"Marketing\"}]

OpsWorks for Puppet Enterprise takes about 15 minutes to create a new server. Do not dismiss the output of the create-server command or close your shell session, because the output can contain important information that is not shown again. To get passwords and the starter kit from the create-server results, go on to the next step.

If you are using a custom domain with the server, in the output of the create-server command, copy the value of the Endpoint attribute. The following is an example.

"Endpoint": "puppet-07-exampleexample.opsworks-cm.us-east-1.amazonaws.com"

If you opted to have OpsWorks for Puppet Enterprise generate a password for you, you can extract it in a usable format from the create-server results by using a JSON processor such as jq. After you install jq, you can run the following commands to extract the Puppet administrator password and starter kit. If you did not provide your own password in Step 3, be sure to save the extracted administrator password in a convenient but secure location.

#Get the Puppet password:
cat resp.json | jq -r '.Server.EngineAttributes[] | select(.Name == "PUPPET_ADMIN_PASSWORD") | .Value'

#Get the Puppet Starter Kit:
cat resp.json | jq -r '.Server.EngineAttributes[] | select(.Name == "PUPPET_STARTER_KIT") | .Value' | base64 -D > starterkit.zip

If you are not using a custom domain, go on to the next step. If you are using a custom domain with the server, create a CNAME entry in your enterprise's DNS management tool to point your custom domain to the OpsWorks for Puppet Enterprise endpoint that you copied in step 6. You cannot reach or sign in to a server with a custom domain until you complete this step.

Go on to the next section, Configure the Puppet Master Using the Starter Kit.