Get-EC2Subnet Cmdlet

Amazon.PowerShell.Cmdlets.EC2.AmazonEC2ClientCmdlet.ClientConfig

The filters.

• availability-zone - The Availability Zone for the subnet. You can also use availabilityZone as the filter name.
• availability-zone-id - The ID of the Availability Zone for the subnet. You can also use availabilityZoneId as the filter name.
• available-ip-address-count - The number of IPv4 addresses in the subnet that are available.
• cidr-block - The IPv4 CIDR block of the subnet. The CIDR block you specify must exactly match the subnet's CIDR block for information to be returned for the subnet. You can also use cidr or cidrBlock as the filter names.
• customer-owned-ipv4-pool - The customer-owned IPv4 address pool associated with the subnet.
• default-for-az - Indicates whether this is the default subnet for the Availability Zone (true | false). You can also use defaultForAz as the filter name.
• enable-dns64 - Indicates whether DNS queries made to the Amazon-provided DNS Resolver in this subnet should return synthetic IPv6 addresses for IPv4-only destinations.
• enable-lni-at-device-index - Indicates the device position for local network interfaces in this subnet. For example, 1 indicates local network interfaces in this subnet are the secondary network interface (eth1).
• ipv6-cidr-block-association.ipv6-cidr-block - An IPv6 CIDR block associated with the subnet.
• ipv6-cidr-block-association.association-id - An association ID for an IPv6 CIDR block associated with the subnet.
• ipv6-cidr-block-association.state - The state of an IPv6 CIDR block associated with the subnet.
• ipv6-native - Indicates whether this is an IPv6 only subnet (true | false).
• map-customer-owned-ip-on-launch - Indicates whether a network interface created in this subnet (including a network interface created by RunInstances) receives a customer-owned IPv4 address.
• map-public-ip-on-launch - Indicates whether instances launched in this subnet receive a public IPv4 address.
• outpost-arn - The Amazon Resource Name (ARN) of the Outpost.
• owner-id - The ID of the Amazon Web Services account that owns the subnet.
• private-dns-name-options-on-launch.hostname-type - The type of hostname to assign to instances in the subnet at launch. For IPv4-only and dual-stack (IPv4 and IPv6) subnets, an instance DNS name can be based on the instance IPv4 address (ip-name) or the instance ID (resource-name). For IPv6 only subnets, an instance DNS name must be based on the instance ID (resource-name).
• private-dns-name-options-on-launch.enable-resource-name-dns-a-record - Indicates whether to respond to DNS queries for instance hostnames with DNS A records.
• private-dns-name-options-on-launch.enable-resource-name-dns-aaaa-record - Indicates whether to respond to DNS queries for instance hostnames with DNS AAAA records.
• state - The state of the subnet (pending | available).
• subnet-arn - The Amazon Resource Name (ARN) of the subnet.
• subnet-id - The ID of the subnet.
• tag - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.
• tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.
• vpc-id - The ID of the VPC for the subnet.

The maximum number of items to return for this request. To get the next page of items, make another request with the token returned in the output. For more information, see Pagination.
Note: In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

The token returned from a previous paginated request. Pagination continues from the end of the items returned by the previous request.
Note: This parameter is only used if you are manually controlling output pagination of the service API call.
'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls.

By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point.

Changes the cmdlet behavior to return the value passed to the SubnetId parameter. The -PassThru parameter is deprecated, use -Select '^SubnetId' instead. This parameter will be removed in a future version.

Use the -Select parameter to control the cmdlet output. The default value is 'Subnets'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EC2.Model.DescribeSubnetsResponse). Specifying the name of a property of type Amazon.EC2.Model.DescribeSubnetsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

The IDs of the subnets.Default: Describes all your subnets.

The AWS access key for the user account. This can be a temporary access key if the corresponding session token is supplied to the -SessionToken parameter.

An AWSCredentials object instance containing access and secret key information, and optionally a token for session-based credentials.

The endpoint to make the call against.Note: This parameter is primarily for internal AWS use and is not required/should not be specified for normal usage. The cmdlets normally determine which endpoint to call based on the region specified to the -Region parameter or set as default in the shell (via Set-DefaultAWSRegion). Only specify this parameter if you must direct the call to a specific custom endpoint.

Used with SAML-based authentication when ProfileName references a SAML role profile. Contains the network credentials to be supplied during authentication with the configured identity provider's endpoint. This parameter is not required if the user's default network identity can or should be used during authentication.

Used to specify the name and location of the ini-format credential file (shared with the AWS CLI and other AWS SDKs)If this optional parameter is omitted this cmdlet will search the encrypted credential file used by the AWS SDK for .NET and AWS Toolkit for Visual Studio first. If the profile is not found then the cmdlet will search in the ini-format credential file at the default location: (user's home directory)\.aws\credentials.If this parameter is specified then this cmdlet will only search the ini-format credential file at the location given.As the current folder can vary in a shell or during script execution it is advised that you use specify a fully qualified path instead of a relative path.

The user-defined name of an AWS credentials or SAML-based role profile containing credential information. The profile is expected to be found in the secure credential file shared with the AWS SDK for .NET and AWS Toolkit for Visual Studio. You can also specify the name of a profile stored in the .ini-format credential file used with the AWS CLI and other AWS SDKs.

The system name of an AWS region or an AWSRegion instance. This governs the endpoint that will be used when calling service operations. Note that the AWS resources referenced in a call are usually region-specific.

The AWS secret key for the user account. This can be a temporary secret key if the corresponding session token is supplied to the -SessionToken parameter.

The session token if the access and secret keys are temporary session-based credentials.