AWS Tools for Windows PowerShell
Command Reference

AWS services or capabilities described in AWS Documentation may vary by region/location. Click Getting Started with Amazon AWS to see specific differences applicable to the China (Beijing) Region.

Synopsis

Calls the Amazon Elastic Compute Cloud (EC2) DescribeVpcs API operation.

Syntax

Get-EC2Vpc
-VpcId <String[]>
-Filter <Filter[]>
-MaxResult <Int32>
-NextToken <String>
-Select <String>
-PassThru <SwitchParameter>
-NoAutoIteration <SwitchParameter>
-ClientConfig <AmazonEC2Config>

Description

Describes your VPCs. The default is to describe all your VPCs. Alternatively, you can specify specific VPC IDs or filter the results to include only the VPCs that match specific criteria.

This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

Parameters

-ClientConfig <AmazonEC2Config>
Amazon.PowerShell.Cmdlets.EC2.AmazonEC2ClientCmdlet.ClientConfig
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Filter <Filter[]>
The filters.
  • cidr - The primary IPv4 CIDR block of the VPC. The CIDR block you specify must exactly match the VPC's CIDR block for information to be returned for the VPC. Must contain the slash followed by one or two digits (for example, /28).
  • cidr-block-association.cidr-block - An IPv4 CIDR block associated with the VPC.
  • cidr-block-association.association-id - The association ID for an IPv4 CIDR block associated with the VPC.
  • cidr-block-association.state - The state of an IPv4 CIDR block associated with the VPC.
  • dhcp-options-id - The ID of a set of DHCP options.
  • ipv6-cidr-block-association.ipv6-cidr-block - An IPv6 CIDR block associated with the VPC.
  • ipv6-cidr-block-association.ipv6-pool - The ID of the IPv6 address pool from which the IPv6 CIDR block is allocated.
  • ipv6-cidr-block-association.association-id - The association ID for an IPv6 CIDR block associated with the VPC.
  • ipv6-cidr-block-association.state - The state of an IPv6 CIDR block associated with the VPC.
  • is-default - Indicates whether the VPC is the default VPC.
  • owner-id - The ID of the Amazon Web Services account that owns the VPC.
  • state - The state of the VPC (pending | available).
  • tag:<key> - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.
  • tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.
  • vpc-id - The ID of the VPC.
Required?False
Position?2
Accept pipeline input?True (ByPropertyName)
AliasesFilters
-MaxResult <Int32>
The maximum number of items to return for this request. To get the next page of items, make another request with the token returned in the output. For more information, see Pagination.
Note: In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesMaxItems, MaxResults
-NextToken <String>
The token returned from a previous paginated request. Pagination continues from the end of the items returned by the previous request.
Note: This parameter is only used if you are manually controlling output pagination of the service API call.
'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-NoAutoIteration <SwitchParameter>
By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-PassThru <SwitchParameter>
Changes the cmdlet behavior to return the value passed to the VpcId parameter. The -PassThru parameter is deprecated, use -Select '^VpcId' instead. This parameter will be removed in a future version.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Select <String>
Use the -Select parameter to control the cmdlet output. The default value is 'Vpcs'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EC2.Model.DescribeVpcsResponse). Specifying the name of a property of type Amazon.EC2.Model.DescribeVpcsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-VpcId <String[]>
The IDs of the VPCs.
Required?False
Position?1
Accept pipeline input?True (ByValue, ByPropertyName)
AliasesVpcIds

Common Credential and Region Parameters

-AccessKey <String>
The AWS access key for the user account. This can be a temporary access key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAK
-Credential <AWSCredentials>
An AWSCredentials object instance containing access and secret key information, and optionally a token for session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-EndpointUrl <String>
The endpoint to make the call against.Note: This parameter is primarily for internal AWS use and is not required/should not be specified for normal usage. The cmdlets normally determine which endpoint to call based on the region specified to the -Region parameter or set as default in the shell (via Set-DefaultAWSRegion). Only specify this parameter if you must direct the call to a specific custom endpoint.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-NetworkCredential <PSCredential>
Used with SAML-based authentication when ProfileName references a SAML role profile. Contains the network credentials to be supplied during authentication with the configured identity provider's endpoint. This parameter is not required if the user's default network identity can or should be used during authentication.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-ProfileLocation <String>
Used to specify the name and location of the ini-format credential file (shared with the AWS CLI and other AWS SDKs)If this optional parameter is omitted this cmdlet will search the encrypted credential file used by the AWS SDK for .NET and AWS Toolkit for Visual Studio first. If the profile is not found then the cmdlet will search in the ini-format credential file at the default location: (user's home directory)\.aws\credentials.If this parameter is specified then this cmdlet will only search the ini-format credential file at the location given.As the current folder can vary in a shell or during script execution it is advised that you use specify a fully qualified path instead of a relative path.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAWSProfilesLocation, ProfilesLocation
-ProfileName <String>
The user-defined name of an AWS credentials or SAML-based role profile containing credential information. The profile is expected to be found in the secure credential file shared with the AWS SDK for .NET and AWS Toolkit for Visual Studio. You can also specify the name of a profile stored in the .ini-format credential file used with the AWS CLI and other AWS SDKs.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesStoredCredentials, AWSProfileName
-Region <Object>
The system name of an AWS region or an AWSRegion instance. This governs the endpoint that will be used when calling service operations. Note that the AWS resources referenced in a call are usually region-specific.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesRegionToCall
-SecretKey <String>
The AWS secret key for the user account. This can be a temporary secret key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesSK, SecretAccessKey
-SessionToken <String>
The session token if the access and secret keys are temporary session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesST

Outputs

Amazon.EC2.Model.Vpc or Amazon.EC2.Model.DescribeVpcsResponse
This cmdlet returns a collection of Amazon.EC2.Model.Vpc objects. The service call response (type Amazon.EC2.Model.DescribeVpcsResponse) can be returned by specifying '-Select *'.

Examples

Example 1

Get-EC2Vpc -VpcId vpc-12345678

CidrBlock       : 10.0.0.0/16
DhcpOptionsId   : dopt-1a2b3c4d
InstanceTenancy : default
IsDefault       : False
State           : available
Tags            : {Name}
VpcId           : vpc-12345678
This example describes the specified VPC.

Example 2

Get-EC2Vpc -Filter @{Name="isDefault"; Values="true"}

CidrBlock       : 172.31.0.0/16
DhcpOptionsId   : dopt-12345678
InstanceTenancy : default
IsDefault       : True
State           : available
Tags            : {}
VpcId           : vpc-45678901
This example describes the default VPC (there can be only one per region). If your account supports EC2-Classic in this region, there is no default VPC.

Example 3

Get-EC2Vpc -Filter @{Name="cidr"; Values="10.0.0.0/16"},@{Name="state";Values="available"}
This example describes the VPCs that match the specified filter (that is, have a CIDR that matches the value '10.0.0.0/16' and are in the state 'available').

Example 4

Get-EC2Vpc
This example describes all your VPCs.
User Guide
Service API Reference
Microsoft Windows Guide
VPC User Guide
AWS Tools for PowerShell User Guide

Supported Version

AWS Tools for PowerShell: 2.x.y.z