AWS Tools for Windows PowerShell
Command Reference

AWS services or capabilities described in AWS Documentation may vary by region/location. Click Getting Started with Amazon AWS to see specific differences applicable to the China (Beijing) Region.

Synopsis

Calls the Amazon Elastic Compute Cloud (EC2) AuthorizeSecurityGroupEgress API operation.

Syntax

Grant-EC2SecurityGroupEgress
-GroupId <String>
-IpPermission <IpPermission[]>
-TagSpecification <TagSpecification[]>
-Select <String>
-PassThru <SwitchParameter>
-Force <SwitchParameter>
-ClientConfig <AmazonEC2Config>

Description

Adds the specified outbound (egress) rules to a security group. An outbound rule permits instances to send traffic to the specified IPv4 or IPv6 address ranges, the IP address ranges specified by a prefix list, or the instances that are associated with a source security group. For more information, see Security group rules. You must specify exactly one of the following destinations: an IPv4 or IPv6 address range, a prefix list, or a security group. You must specify a protocol for each rule (for example, TCP). If the protocol is TCP or UDP, you must also specify a port or port range. If the protocol is ICMP or ICMPv6, you must also specify the ICMP type and code. Rule changes are propagated to instances associated with the security group as quickly as possible. However, a small delay might occur. For examples of rules that you can add to security groups for specific access scenarios, see Security group rules for different use cases in the Amazon EC2 User Guide. For information about security group quotas, see Amazon VPC quotas in the Amazon VPC User Guide.

Parameters

-ClientConfig <AmazonEC2Config>
Amazon.PowerShell.Cmdlets.EC2.AmazonEC2ClientCmdlet.ClientConfig
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Force <SwitchParameter>
This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-GroupId <String>
The ID of the security group.
Required?True
Position?1
Accept pipeline input?True (ByValue, ByPropertyName)
-IpPermission <IpPermission[]>
The permissions for the security group rules.
Required?False
Position?2
Accept pipeline input?True (ByPropertyName)
AliasesIpPermissions
-PassThru <SwitchParameter>
Changes the cmdlet behavior to return the value passed to the GroupId parameter. The -PassThru parameter is deprecated, use -Select '^GroupId' instead. This parameter will be removed in a future version.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Select <String>
Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.EC2.Model.AuthorizeSecurityGroupEgressResponse). Specifying the name of a property of type Amazon.EC2.Model.AuthorizeSecurityGroupEgressResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-TagSpecification <TagSpecification[]>
The tags applied to the security group rule.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesTagSpecifications

Common Credential and Region Parameters

-AccessKey <String>
The AWS access key for the user account. This can be a temporary access key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAK
-Credential <AWSCredentials>
An AWSCredentials object instance containing access and secret key information, and optionally a token for session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-EndpointUrl <String>
The endpoint to make the call against.Note: This parameter is primarily for internal AWS use and is not required/should not be specified for normal usage. The cmdlets normally determine which endpoint to call based on the region specified to the -Region parameter or set as default in the shell (via Set-DefaultAWSRegion). Only specify this parameter if you must direct the call to a specific custom endpoint.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-NetworkCredential <PSCredential>
Used with SAML-based authentication when ProfileName references a SAML role profile. Contains the network credentials to be supplied during authentication with the configured identity provider's endpoint. This parameter is not required if the user's default network identity can or should be used during authentication.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-ProfileLocation <String>
Used to specify the name and location of the ini-format credential file (shared with the AWS CLI and other AWS SDKs)If this optional parameter is omitted this cmdlet will search the encrypted credential file used by the AWS SDK for .NET and AWS Toolkit for Visual Studio first. If the profile is not found then the cmdlet will search in the ini-format credential file at the default location: (user's home directory)\.aws\credentials.If this parameter is specified then this cmdlet will only search the ini-format credential file at the location given.As the current folder can vary in a shell or during script execution it is advised that you use specify a fully qualified path instead of a relative path.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAWSProfilesLocation, ProfilesLocation
-ProfileName <String>
The user-defined name of an AWS credentials or SAML-based role profile containing credential information. The profile is expected to be found in the secure credential file shared with the AWS SDK for .NET and AWS Toolkit for Visual Studio. You can also specify the name of a profile stored in the .ini-format credential file used with the AWS CLI and other AWS SDKs.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesStoredCredentials, AWSProfileName
-Region <Object>
The system name of an AWS region or an AWSRegion instance. This governs the endpoint that will be used when calling service operations. Note that the AWS resources referenced in a call are usually region-specific.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesRegionToCall
-SecretKey <String>
The AWS secret key for the user account. This can be a temporary secret key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesSK, SecretAccessKey
-SessionToken <String>
The session token if the access and secret keys are temporary session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesST

Outputs

Amazon.EC2.Model.AuthorizeSecurityGroupEgressResponse
This cmdlet returns an Amazon.EC2.Model.AuthorizeSecurityGroupEgressResponse object containing multiple properties.

Examples

Example 1

$ip = @{ IpProtocol="tcp"; FromPort="80"; ToPort="80"; IpRanges="203.0.113.0/24" }
Grant-EC2SecurityGroupEgress -GroupId sg-12345678 -IpPermission $ip
This example defines an egress rule for the specified security group for EC2-VPC. The rule grants access to the specified IP address range on TCP port 80. The syntax used by this example requires PowerShell version 3 or higher.

Example 2

$ip = New-Object Amazon.EC2.Model.IpPermission
$ip.IpProtocol = "tcp"
$ip.FromPort = 80
$ip.ToPort = 80
$ip.IpRanges.Add("203.0.113.0/24")

Grant-EC2SecurityGroupEgress -GroupId sg-12345678 -IpPermission $ip
With PowerShell version 2, you must use New-Object to create the IpPermission object.

Example 3

$ug = New-Object Amazon.EC2.Model.UserIdGroupPair
$ug.GroupId = "sg-1a2b3c4d"
$ug.UserId = "123456789012"

Grant-EC2SecurityGroupEgress -GroupId sg-12345678 -IpPermission @( @{ IpProtocol="tcp"; FromPort="80"; ToPort="80"; UserIdGroupPairs=$ug } )
This example grants access to the specified source security group on TCP port 80.
User Guide
Service API Reference
Microsoft Windows Guide
VPC User Guide
AWS Tools for PowerShell User Guide

Supported Version

AWS Tools for PowerShell: 2.x.y.z