VpnConnectionOptionsSpecification
Describes VPN connection options.
Contents
- EnableAcceleration
-
Indicate whether to enable acceleration for the VPN connection.
Default:
falseType: Boolean
Required: No
- LocalIpv4NetworkCidr
-
The IPv4 CIDR on the customer gateway (on-premises) side of the VPN connection.
Default:
0.0.0.0/0Type: String
Required: No
- LocalIpv6NetworkCidr
-
The IPv6 CIDR on the customer gateway (on-premises) side of the VPN connection.
Default:
::/0Type: String
Required: No
- OutsideIpAddressType
-
The type of IPv4 address assigned to the outside interface of the customer gateway device.
Valid values:
PrivateIpv4|PublicIpv4Default:
PublicIpv4Type: String
Required: No
- RemoteIpv4NetworkCidr
-
The IPv4 CIDR on the AWS side of the VPN connection.
Default:
0.0.0.0/0Type: String
Required: No
- RemoteIpv6NetworkCidr
-
The IPv6 CIDR on the AWS side of the VPN connection.
Default:
::/0Type: String
Required: No
- StaticRoutesOnly
-
Indicate whether the VPN connection uses static routes only. If you are creating a VPN connection for a device that does not support BGP, you must specify
true. Use CreateVpnConnectionRoute to create a static route.Default:
falseType: Boolean
Required: No
- TransportTransitGatewayAttachmentId
-
The transit gateway attachment ID to use for the VPN tunnel.
Required if
OutsideIpAddressTypeis set toPrivateIpv4.Type: String
Required: No
- TunnelInsideIpVersion
-
Indicate whether the VPN tunnels process IPv4 or IPv6 traffic.
Default:
ipv4Type: String
Valid Values:
ipv4 | ipv6Required: No
- TunnelOptions
-
The tunnel options for the VPN connection.
Type: Array of VpnTunnelOptionsSpecification objects
Required: No
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
