Como usar o armazenamento em cache de chaves de dados

No AWS Encryption SDK for C, você cria uma sessão com o cache CMM e, em seguida, processa a sessão.

Por padrão, quando o tamanho da mensagem é desconhecido e ilimitado, as chaves de dados AWS Encryption SDK não são armazenadas em cache. Para permitir o armazenamento em cache quando não se sabe o tamanho exato dos dados, use o método aws_cryptosdk_session_set_message_bound para definir o tamanho máximo da mensagem. Defina o vínculo maior do que o tamanho estimado da mensagem. Se o tamanho real da mensagem exceder o vínculo, ocorrerá uma falha na operação da criptografia.

/* Create a session with the caching CMM. Set the session mode to encrypt. */
struct aws_cryptosdk_session *session = aws_cryptosdk_session_new_from_cmm_2(allocator, AWS_CRYPTOSDK_ENCRYPT, caching_cmm);

/* Set a message bound of 1000 bytes */
aws_status = aws_cryptosdk_session_set_message_bound(session, 1000);

/* Encrypt the message using the session with the caching CMM */
aws_status = aws_cryptosdk_session_process(
             session, output_buffer, output_capacity, &output_produced, input_buffer, input_len, &input_consumed);

/* Release your references to the caching CMM and the session. */
aws_cryptosdk_cmm_release(caching_cmm);
aws_cryptosdk_session_destroy(session);

O exemplo a seguir usa a versão 2. x do AWS Encryption SDK for Java. Versão 3. x of the AWS Encryption SDK for Java descontinua o armazenamento em cache da chave de dados. CMM Com a versão 3. x, você também pode usar o AWS KMS chaveiro hierárquico, uma solução alternativa de cache de materiais criptográficos.

// When the call to encryptData specifies a caching CMM,
// the encryption operation uses the data key cache
final AwsCrypto encryptionSdk = AwsCrypto.standard();
return encryptionSdk.encryptData(cachingCmm, plaintext_source).getResult();

const { result } = await encrypt(cachingCmm, plaintext)

Quando você usa o cache CMM no AWS Encryption SDK para JavaScript for Node.js, o encrypt método requer o tamanho do texto sem formatação. Se você não fornecer, a chave de dados não será armazenada em cache. Se você fornecer um tamanho, mas os dados de texto simples fornecidos excederem esse tamanho, a operação de criptografia falhará. Se você não souber o tamanho exato do texto simples, como quando estiver fazendo streaming de dados, forneça o maior valor esperado.

const { result } = await encrypt(cachingCmm, plaintext, { plaintextLength: plaintext.length })

# Set up an encryption client
client = aws_encryption_sdk.EncryptionSDKClient()

# When the call to encrypt specifies a caching CMM,
# the encryption operation uses the data key cache
#
encrypted_message, header = client.encrypt(
    source=plaintext_source,
    materials_manager=caching_cmm
)

/*
 * Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 *
 * Licensed under the Apache License, Version 2.0 (the "License"). You may not use
 * this file except in compliance with the License. A copy of the License is
 * located at
 *
 *     http://aws.amazon.com/apache2.0/
 *
 * or in the "license" file accompanying this file. This file is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
 * implied. See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include <aws/cryptosdk/cache.h>
#include <aws/cryptosdk/cpp/kms_keyring.h>
#include <aws/cryptosdk/session.h>

void encrypt_with_caching(
    uint8_t *ciphertext,     // output will go here (assumes ciphertext_capacity bytes already allocated)
    size_t *ciphertext_len,  // length of output will go here
    size_t ciphertext_capacity,
    const char *kms_key_arn,
    int max_entry_age,
    int cache_capacity) {
    const uint64_t MAX_ENTRY_MSGS = 100;

    struct aws_allocator *allocator = aws_default_allocator();
    
    // Load error strings for debugging
    aws_cryptosdk_load_error_strings();

    // Create a keyring
    struct aws_cryptosdk_keyring *kms_keyring = Aws::Cryptosdk::KmsKeyring::Builder().Build(kms_key_arn);

    // Create a cache
    struct aws_cryptosdk_materials_cache *cache = aws_cryptosdk_materials_cache_local_new(allocator, cache_capacity);

    // Create a caching CMM
    struct aws_cryptosdk_cmm *caching_cmm = aws_cryptosdk_caching_cmm_new_from_keyring(
        allocator, cache, kms_keyring, NULL, max_entry_age, AWS_TIMESTAMP_SECS);
    if (!caching_cmm) abort();

    if (aws_cryptosdk_caching_cmm_set_limit_messages(caching_cmm, MAX_ENTRY_MSGS)) abort();

    // Create a session
    struct aws_cryptosdk_session *session =        
        aws_cryptosdk_session_new_from_cmm_2(allocator, AWS_CRYPTOSDK_ENCRYPT, caching_cmm);
    if (!session) abort();

    // Encryption context
    struct aws_hash_table *enc_ctx = aws_cryptosdk_session_get_enc_ctx_ptr_mut(session);
    if (!enc_ctx) abort();
    AWS_STATIC_STRING_FROM_LITERAL(enc_ctx_key, "purpose");
    AWS_STATIC_STRING_FROM_LITERAL(enc_ctx_value, "test");
    if (aws_hash_table_put(enc_ctx, enc_ctx_key, (void *)enc_ctx_value, NULL)) abort();

    // Plaintext data to be encrypted
    const char *my_data = "My plaintext data";
    size_t my_data_len  = strlen(my_data);
    if (aws_cryptosdk_session_set_message_size(session, my_data_len)) abort();

    // When the session uses a caching CMM, the encryption operation uses the data key cache
    // specified in the caching CMM.
    size_t bytes_read;
    if (aws_cryptosdk_session_process(
            session,
            ciphertext,
            ciphertext_capacity,
            ciphertext_len,
            (const uint8_t *)my_data,
            my_data_len,
            &bytes_read))
        abort();
    if (!aws_cryptosdk_session_is_done(session) || bytes_read != my_data_len) abort();

    aws_cryptosdk_session_destroy(session);
    aws_cryptosdk_cmm_release(caching_cmm);
    aws_cryptosdk_materials_cache_release(cache);
    aws_cryptosdk_keyring_release(kms_keyring);
}

O exemplo a seguir usa a versão 2. x do AWS Encryption SDK for Java. Versão 3. x of the AWS Encryption SDK for Java descontinua o armazenamento em cache da chave de dados. CMM Com a versão 3. x, você também pode usar o AWS KMS chaveiro hierárquico, uma solução alternativa de cache de materiais criptográficos.

// Copyright Amazon.com Inc. or its affiliates. All Rights Reserved.
// SPDX-License-Identifier: Apache-2.0

package com.amazonaws.crypto.examples;

import com.amazonaws.encryptionsdk.AwsCrypto;
import com.amazonaws.encryptionsdk.CryptoMaterialsManager;
import com.amazonaws.encryptionsdk.MasterKeyProvider;
import com.amazonaws.encryptionsdk.caching.CachingCryptoMaterialsManager;
import com.amazonaws.encryptionsdk.caching.CryptoMaterialsCache;
import com.amazonaws.encryptionsdk.caching.LocalCryptoMaterialsCache;
import com.amazonaws.encryptionsdk.kmssdkv2.KmsMasterKey;
import com.amazonaws.encryptionsdk.kmssdkv2.KmsMasterKeyProvider;
import java.nio.charset.StandardCharsets;
import java.util.Collections;
import java.util.Map;
import java.util.concurrent.TimeUnit;

/**
 * <p>
 * Encrypts a string using an &KMS; key and data key caching
 *
 * <p>
 * Arguments:
 * <ol>
 * <li>KMS Key ARN: To find the Amazon Resource Name of your &KMS; key,
 *     see 'Find the key ID and ARN' at https://docs.aws.amazon.com/kms/latest/developerguide/find-cmk-id-arn.html
 * <li>Max entry age: Maximum time (in seconds) that a cached entry can be used
 * <li>Cache capacity: Maximum number of entries in the cache
 * </ol>
 */
public class SimpleDataKeyCachingExample {

    /*
     * Security thresholds
     *   Max entry age is required.
     *   Max messages (and max bytes) per data key are optional
     */
    private static final int MAX_ENTRY_MSGS = 100;

    public static byte[] encryptWithCaching(String kmsKeyArn, int maxEntryAge, int cacheCapacity) {
        // Plaintext data to be encrypted
        byte[] myData = "My plaintext data".getBytes(StandardCharsets.UTF_8);

        // Encryption context
        // Most encrypted data should have an associated encryption context
        // to protect integrity. This sample uses placeholder values.
        // For more information see:
        // blogs.aws.amazon.com/security/post/Tx2LZ6WBJJANTNW/How-to-Protect-the-Integrity-of-Your-Encrypted-Data-by-Using-AWS-Key-Management
        final Map<String, String> encryptionContext = Collections.singletonMap("purpose", "test");

        // Create a master key provider
        MasterKeyProvider<KmsMasterKey> keyProvider = KmsMasterKeyProvider.builder()
            .buildStrict(kmsKeyArn);

        // Create a cache
        CryptoMaterialsCache cache = new LocalCryptoMaterialsCache(cacheCapacity);

        // Create a caching CMM
        CryptoMaterialsManager cachingCmm =
            CachingCryptoMaterialsManager.newBuilder().withMasterKeyProvider(keyProvider)
                .withCache(cache)
                .withMaxAge(maxEntryAge, TimeUnit.SECONDS)
                .withMessageUseLimit(MAX_ENTRY_MSGS)
                .build();

        // When the call to encryptData specifies a caching CMM,
        // the encryption operation uses the data key cache
        final AwsCrypto encryptionSdk = AwsCrypto.standard();
        return encryptionSdk.encryptData(cachingCmm, myData, encryptionContext).getResult();
    }
}

// Copyright Amazon.com Inc. or its affiliates. All Rights Reserved.
// SPDX-License-Identifier: Apache-2.0

/* This is a simple example of using a caching CMM with a KMS keyring
 * to encrypt and decrypt using the AWS Encryption SDK for Javascript in a browser.
 */

import {
  KmsKeyringBrowser,
  KMS,
  getClient,
  buildClient,
  CommitmentPolicy,
  WebCryptoCachingMaterialsManager,
  getLocalCryptographicMaterialsCache,
} from '@aws-crypto/client-browser'
import { toBase64 } from '@aws-sdk/util-base64-browser'

/* This builds the client with the REQUIRE_ENCRYPT_REQUIRE_DECRYPT commitment policy,
 * which enforces that this client only encrypts using committing algorithm suites
 * and enforces that this client
 * will only decrypt encrypted messages
 * that were created with a committing algorithm suite.
 * This is the default commitment policy
 * if you build the client with `buildClient()`.
 */
const { encrypt, decrypt } = buildClient(
  CommitmentPolicy.REQUIRE_ENCRYPT_REQUIRE_DECRYPT
)

/* This is injected by webpack.
 * The webpack.DefinePlugin or @aws-sdk/karma-credential-loader will replace the values when bundling.
 * The credential values are pulled from @aws-sdk/credential-provider-node
 * Use any method you like to get credentials into the browser.
 * See kms.webpack.config
 */
declare const credentials: {
  accessKeyId: string
  secretAccessKey: string
  sessionToken: string
}

/* This is done to facilitate testing. */
export async function testCachingCMMExample() {
  /* This example uses an &KMS; keyring. The generator key in a &KMS; keyring generates and encrypts the data key.
   * The caller needs kms:GenerateDataKey permission on the &KMS; key in generatorKeyId.
   */
  const generatorKeyId =
    'arn:aws:kms:us-west-2:658956600833:alias/EncryptDecrypt'

  /* Adding additional KMS keys that can decrypt.
   * The caller must have kms:Encrypt permission for every &KMS; key in keyIds.
   * You might list several keys in different AWS Regions.
   * This allows you to decrypt the data in any of the represented Regions.
   * In this example, the generator key
   * and the additional key are actually the same &KMS; key.
   * In `generatorId`, this &KMS; key is identified by its alias ARN.
   * In `keyIds`, this &KMS; key is identified by its key ARN.
   * In practice, you would specify different &KMS; keys,
   * or omit the `keyIds` parameter.
   * This is *only* to demonstrate how the &KMS; key ARNs are configured.
   */
  const keyIds = [
    'arn:aws:kms:us-west-2:658956600833:key/b3537ef1-d8dc-4780-9f5a-55776cbb2f7f',
  ]

  /* Need a client provider that will inject correct credentials.
   * The credentials here are injected by webpack from your environment bundle is created
   * The credential values are pulled using @aws-sdk/credential-provider-node.
   * See kms.webpack.config
   * You should inject your credential into the browser in a secure manner
   * that works with your application.
   */
  const { accessKeyId, secretAccessKey, sessionToken } = credentials

  /* getClient takes a KMS client constructor
   * and optional configuration values.
   * The credentials can be injected here,
   * because browsers do not have a standard credential discovery process the way Node.js does.
   */
  const clientProvider = getClient(KMS, {
    credentials: {
      accessKeyId,
      secretAccessKey,
      sessionToken,
    },
  })

  /* You must configure the KMS keyring with your &KMS; keys */
  const keyring = new KmsKeyringBrowser({
    clientProvider,
    generatorKeyId,
    keyIds,
  })

  /* Create a cache to hold the data keys (and related cryptographic material).
   * This example uses the local cache provided by the Encryption SDK.
   * The `capacity` value represents the maximum number of entries
   * that the cache can hold.
   * To make room for an additional entry,
   * the cache evicts the oldest cached entry.
   * Both encrypt and decrypt requests count independently towards this threshold.
   * Entries that exceed any cache threshold are actively removed from the cache.
   * By default, the SDK checks one item in the cache every 60 seconds (60,000 milliseconds).
   * To change this frequency, pass in a `proactiveFrequency` value
   * as the second parameter. This value is in milliseconds.
   */
  const capacity = 100
  const cache = getLocalCryptographicMaterialsCache(capacity)

  /* The partition name lets multiple caching CMMs share the same local cryptographic cache.
   * By default, the entries for each CMM are cached separately. However, if you want these CMMs to share the cache,
   * use the same partition name for both caching CMMs.
   * If you don't supply a partition name, the Encryption SDK generates a random name for each caching CMM.
   * As a result, sharing elements in the cache MUST be an intentional operation.
   */
  const partition = 'local partition name'

  /* maxAge is the time in milliseconds that an entry will be cached.
   * Elements are actively removed from the cache.
   */
  const maxAge = 1000 * 60

  /* The maximum number of bytes that will be encrypted under a single data key.
   * This value is optional,
   * but you should configure the lowest practical value.
   */
  const maxBytesEncrypted = 100

  /* The maximum number of messages that will be encrypted under a single data key.
   * This value is optional,
   * but you should configure the lowest practical value.
   */
  const maxMessagesEncrypted = 10

  const cachingCMM = new WebCryptoCachingMaterialsManager({
    backingMaterials: keyring,
    cache,
    partition,
    maxAge,
    maxBytesEncrypted,
    maxMessagesEncrypted,
  })

  /* Encryption context is a *very* powerful tool for controlling
   * and managing access.
   * When you pass an encryption context to the encrypt function,
   * the encryption context is cryptographically bound to the ciphertext.
   * If you don't pass in the same encryption context when decrypting,
   * the decrypt function fails.
   * The encryption context is ***not*** secret!
   * Encrypted data is opaque.
   * You can use an encryption context to assert things about the encrypted data.
   * The encryption context helps you to determine
   * whether the ciphertext you retrieved is the ciphertext you expect to decrypt.
   * For example, if you are are only expecting data from 'us-west-2',
   * the appearance of a different AWS Region in the encryption context can indicate malicious interference.
   * See: https://docs.aws.amazon.com/encryption-sdk/latest/developer-guide/concepts.html#encryption-context
   *
   * Also, cached data keys are reused ***only*** when the encryption contexts passed into the functions are an exact case-sensitive match.
   * See: https://docs.aws.amazon.com/encryption-sdk/latest/developer-guide/data-caching-details.html#caching-encryption-context
   */
  const encryptionContext = {
    stage: 'demo',
    purpose: 'simple demonstration app',
    origin: 'us-west-2',
  }

  /* Find data to encrypt. */
  const plainText = new Uint8Array([1, 2, 3, 4, 5])

  /* Encrypt the data.
   * The caching CMM only reuses data keys
   * when it know the length (or an estimate) of the plaintext.
   * However, in the browser,
   * you must provide all of the plaintext to the encrypt function.
   * Therefore, the encrypt function in the browser knows the length of the plaintext
   * and does not accept a plaintextLength option.
   */
  const { result } = await encrypt(cachingCMM, plainText, { encryptionContext })

  /* Log the plain text
   * only for testing and to show that it works.
   */
  console.log('plainText:', plainText)
  document.write('</br>plainText:' + plainText + '</br>')

  /* Log the base64-encoded result
   * so that you can try decrypting it with another AWS Encryption SDK implementation.
   */
  const resultBase64 = toBase64(result)
  console.log(resultBase64)
  document.write(resultBase64)

  /* Decrypt the data.
   * NOTE: This decrypt request will not use the data key
   * that was cached during the encrypt operation.
   * Data keys for encrypt and decrypt operations are cached separately.
   */
  const { plaintext, messageHeader } = await decrypt(cachingCMM, result)

  /* Grab the encryption context so you can verify it. */
  const { encryptionContext: decryptedContext } = messageHeader

  /* Verify the encryption context.
   * If you use an algorithm suite with signing,
   * the Encryption SDK adds a name-value pair to the encryption context that contains the public key.
   * Because the encryption context might contain additional key-value pairs,
   * do not include a test that requires that all key-value pairs match.
   * Instead, verify that the key-value pairs that you supplied to the `encrypt` function are included in the encryption context that the `decrypt` function returns.
   */
  Object.entries(encryptionContext).forEach(([key, value]) => {
    if (decryptedContext[key] !== value)
      throw new Error('Encryption Context does not match expected values')
  })

  /* Log the clear message
   * only for testing and to show that it works.
   */
  document.write('</br>Decrypted:' + plaintext)
  console.log(plaintext)

  /* Return the values to make testing easy. */
  return { plainText, plaintext }
}

// Copyright Amazon.com Inc. or its affiliates. All Rights Reserved.
// SPDX-License-Identifier: Apache-2.0

import {
  KmsKeyringNode,
  buildClient,
  CommitmentPolicy,
  NodeCachingMaterialsManager,
  getLocalCryptographicMaterialsCache,
} from '@aws-crypto/client-node'

/* This builds the client with the REQUIRE_ENCRYPT_REQUIRE_DECRYPT commitment policy,
 * which enforces that this client only encrypts using committing algorithm suites
 * and enforces that this client
 * will only decrypt encrypted messages
 * that were created with a committing algorithm suite.
 * This is the default commitment policy
 * if you build the client with `buildClient()`.
 */
const { encrypt, decrypt } = buildClient(
  CommitmentPolicy.REQUIRE_ENCRYPT_REQUIRE_DECRYPT
)

export async function cachingCMMNodeSimpleTest() {
  /* An &KMS; key is required to generate the data key.
   * You need kms:GenerateDataKey permission on the &KMS; key in generatorKeyId.
   */
  const generatorKeyId =
    'arn:aws:kms:us-west-2:658956600833:alias/EncryptDecrypt'

  /* Adding alternate &KMS; keys that can decrypt.
   * Access to kms:Encrypt is required for every &KMS; key in keyIds.
   * You might list several keys in different AWS Regions.
   * This allows you to decrypt the data in any of the represented Regions.
   * In this example, the generator key
   * and the additional key are actually the same &KMS; key.
   * In `generatorId`, this &KMS; key is identified by its alias ARN.
   * In `keyIds`, this &KMS; key is identified by its key ARN.
   * In practice, you would specify different &KMS; keys,
   * or omit the `keyIds` parameter.
   * This is *only* to demonstrate how the &KMS; key ARNs are configured.
   */
  const keyIds = [
    'arn:aws:kms:us-west-2:658956600833:key/b3537ef1-d8dc-4780-9f5a-55776cbb2f7f',
  ]

  /* The &KMS; keyring must be configured with the desired &KMS; keys
   * This example passes the keyring to the caching CMM
   * instead of using it directly.
   */
  const keyring = new KmsKeyringNode({ generatorKeyId, keyIds })

  /* Create a cache to hold the data keys (and related cryptographic material).
   * This example uses the local cache provided by the Encryption SDK.
   * The `capacity` value represents the maximum number of entries
   * that the cache can hold.
   * To make room for an additional entry,
   * the cache evicts the oldest cached entry.
   * Both encrypt and decrypt requests count independently towards this threshold.
   * Entries that exceed any cache threshold are actively removed from the cache.
   * By default, the SDK checks one item in the cache every 60 seconds (60,000 milliseconds).
   * To change this frequency, pass in a `proactiveFrequency` value
   * as the second parameter. This value is in milliseconds.
   */
  const capacity = 100
  const cache = getLocalCryptographicMaterialsCache(capacity)

  /* The partition name lets multiple caching CMMs share the same local cryptographic cache.
   * By default, the entries for each CMM are cached separately. However, if you want these CMMs to share the cache,
   * use the same partition name for both caching CMMs.
   * If you don't supply a partition name, the Encryption SDK generates a random name for each caching CMM.
   * As a result, sharing elements in the cache MUST be an intentional operation.
   */
  const partition = 'local partition name'

  /* maxAge is the time in milliseconds that an entry will be cached.
   * Elements are actively removed from the cache.
   */
  const maxAge = 1000 * 60

  /* The maximum amount of bytes that will be encrypted under a single data key.
   * This value is optional,
   * but you should configure the lowest value possible.
   */
  const maxBytesEncrypted = 100

  /* The maximum number of messages that will be encrypted under a single data key.
   * This value is optional,
   * but you should configure the lowest value possible.
   */
  const maxMessagesEncrypted = 10

  const cachingCMM = new NodeCachingMaterialsManager({
    backingMaterials: keyring,
    cache,
    partition,
    maxAge,
    maxBytesEncrypted,
    maxMessagesEncrypted,
  })

  /* Encryption context is a *very* powerful tool for controlling
   * and managing access.
   * When you pass an encryption context to the encrypt function,
   * the encryption context is cryptographically bound to the ciphertext.
   * If you don't pass in the same encryption context when decrypting,
   * the decrypt function fails.
   * The encryption context is ***not*** secret!
   * Encrypted data is opaque.
   * You can use an encryption context to assert things about the encrypted data.
   * The encryption context helps you to determine
   * whether the ciphertext you retrieved is the ciphertext you expect to decrypt.
   * For example, if you are are only expecting data from 'us-west-2',
   * the appearance of a different AWS Region in the encryption context can indicate malicious interference.
   * See: https://docs.aws.amazon.com/encryption-sdk/latest/developer-guide/concepts.html#encryption-context
   *
   * Also, cached data keys are reused ***only*** when the encryption contexts passed into the functions are an exact case-sensitive match.
   * See: https://docs.aws.amazon.com/encryption-sdk/latest/developer-guide/data-caching-details.html#caching-encryption-context
   */
  const encryptionContext = {
    stage: 'demo',
    purpose: 'simple demonstration app',
    origin: 'us-west-2',
  }

  /* Find data to encrypt.  A simple string. */
  const cleartext = 'asdf'

  /* Encrypt the data.
   * The caching CMM only reuses data keys
   * when it know the length (or an estimate) of the plaintext.
   * If you do not know the length,
   * because the data is a stream
   * provide an estimate of the largest expected value.
   *
   * If your estimate is smaller than the actual plaintext length
   * the AWS Encryption SDK will throw an exception.
   *
   * If the plaintext is not a stream,
   * the AWS Encryption SDK uses the actual plaintext length
   * instead of any length you provide.
   */
  const { result } = await encrypt(cachingCMM, cleartext, {
    encryptionContext,
    plaintextLength: 4,
  })

  /* Decrypt the data.
   * NOTE: This decrypt request will not use the data key
   * that was cached during the encrypt operation.
   * Data keys for encrypt and decrypt operations are cached separately.
   */
  const { plaintext, messageHeader } = await decrypt(cachingCMM, result)

  /* Grab the encryption context so you can verify it. */
  const { encryptionContext: decryptedContext } = messageHeader

  /* Verify the encryption context.
   * If you use an algorithm suite with signing,
   * the Encryption SDK adds a name-value pair to the encryption context that contains the public key.
   * Because the encryption context might contain additional key-value pairs,
   * do not include a test that requires that all key-value pairs match.
   * Instead, verify that the key-value pairs that you supplied to the `encrypt` function are included in the encryption context that the `decrypt` function returns.
   */
  Object.entries(encryptionContext).forEach(([key, value]) => {
    if (decryptedContext[key] !== value)
      throw new Error('Encryption Context does not match expected values')
  })

  /* Return the values so the code can be tested. */
  return { plaintext, result, cleartext, messageHeader }
}

# Copyright 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License"). You
# may not use this file except in compliance with the License. A copy of
# the License is located at
#
# http://aws.amazon.com/apache2.0/
#
# or in the "license" file accompanying this file. This file is
# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
# ANY KIND, either express or implied. See the License for the specific
# language governing permissions and limitations under the License.
"""Example of encryption with data key caching."""
import aws_encryption_sdk
from aws_encryption_sdk import CommitmentPolicy


def encrypt_with_caching(kms_key_arn, max_age_in_cache, cache_capacity):
    """Encrypts a string using an &KMS; key and data key caching.

    :param str kms_key_arn: Amazon Resource Name (ARN) of the &KMS; key
    :param float max_age_in_cache: Maximum time in seconds that a cached entry can be used
    :param int cache_capacity: Maximum number of entries to retain in cache at once
    """
    # Data to be encrypted
    my_data = "My plaintext data"

    # Security thresholds
    #   Max messages (or max bytes per) data key are optional
    MAX_ENTRY_MESSAGES = 100

    # Create an encryption context
    encryption_context = {"purpose": "test"}

    # Set up an encryption client with an explicit commitment policy. Note that if you do not explicitly choose a
    # commitment policy, REQUIRE_ENCRYPT_REQUIRE_DECRYPT is used by default.
    client = aws_encryption_sdk.EncryptionSDKClient(commitment_policy=CommitmentPolicy.REQUIRE_ENCRYPT_REQUIRE_DECRYPT)

    # Create a master key provider for the &KMS; key
    key_provider = aws_encryption_sdk.StrictAwsKmsMasterKeyProvider(key_ids=[kms_key_arn])

    # Create a local cache
    cache = aws_encryption_sdk.LocalCryptoMaterialsCache(cache_capacity)

    # Create a caching CMM
    caching_cmm = aws_encryption_sdk.CachingCryptoMaterialsManager(
        master_key_provider=key_provider,
        cache=cache,
        max_age=max_age_in_cache,
        max_messages_encrypted=MAX_ENTRY_MESSAGES,
    )

    # When the call to encrypt data specifies a caching CMM,
    # the encryption operation uses the data key cache specified
    # in the caching CMM
    encrypted_message, _header = client.encrypt(
        source=my_data, materials_manager=caching_cmm, encryption_context=encryption_context
    )

    return encrypted_message