Outputs: update, remove - AWS Elemental MediaConnect

Outputs: update, remove

URI

/v1/flows/flowArn/outputs/outputArn

HTTP methods

PUT

Operation ID: UpdateFlowOutput

Updates an existing flow output.

Path parameters
NameTypeRequiredDescription
flowArnStringTrue

The Amazon Resource Name (ARN) of the flow.

outputArnStringTrue

The ARN of the output that you want to update.

Responses
Status codeResponse modelDescription
202UpdateFlowOutputResponse

MediaConnect is updating the output.

400ResponseError

The request that you submitted is not valid.

403ResponseError

You don't have the required permissions to perform this operation.

404ResponseError

MediaConnect did not find the resource that you specified in the request.

429ResponseError

You have exceeded the service request rate limit for your MediaConnect account.

500ResponseError

MediaConnect can't fulfill your request because it encountered an unexpected condition.

503ResponseError

MediaConnect is currently unavailable. Try again later.

DELETE

Operation ID: RemoveFlowOutput

Removes an output from an existing flow. This request can be made only on an output that does not have an entitlement associated with it. If the output has an entitlement, you must revoke the entitlement instead. When an entitlement is revoked from a flow, the service automatically removes the associated output.

Path parameters
NameTypeRequiredDescription
flowArnStringTrue

The Amazon Resource Name (ARN) of the flow.

outputArnStringTrue

The ARN of the output that you want to update.

Responses
Status codeResponse modelDescription
202RemoveFlowOutputResponse

MediaConnect is removing the output.

400ResponseError

The request that you submitted is not valid.

403ResponseError

You don't have the required permissions to perform this operation.

404ResponseError

MediaConnect did not find the resource that you specified in the request.

429ResponseError

You have exceeded the service request rate limit for your MediaConnect account.

500ResponseError

MediaConnect can't fulfill your request because it encountered an unexpected condition.

503ResponseError

MediaConnect is currently unavailable. Try again later.

Schemas

Request bodies

{ "outputStatus": enum, "mediaStreamOutputConfigurations": [ { "encodingParameters": { "encoderProfile": enum, "compressionFactor": number }, "mediaStreamName": "string", "encodingName": enum, "destinationConfigurations": [ { "destinationIp": "string", "destinationPort": integer, "interface": { "name": "string" } } ] } ], "streamId": "string", "minLatency": integer, "destination": "string", "maxLatency": integer, "description": "string", "smoothingLatency": integer, "vpcInterfaceAttachment": { "vpcInterfaceName": "string" }, "remoteId": "string", "senderIpAddress": "string", "protocol": enum, "encryption": { "resourceId": "string", "roleArn": "string", "secretArn": "string", "constantInitializationVector": "string", "keyType": enum, "region": "string", "deviceId": "string", "url": "string", "algorithm": enum }, "port": integer, "senderControlPort": integer, "cidrAllowList": [ "string" ] }

Response bodies

{ "output": { "outputStatus": enum, "listenerAddress": "string", "mediaStreamOutputConfigurations": [ { "encodingParameters": { "encoderProfile": enum, "compressionFactor": number }, "mediaStreamName": "string", "encodingName": enum, "destinationConfigurations": [ { "destinationIp": "string", "destinationPort": integer, "outboundIp": "string", "interface": { "name": "string" } } ] } ], "destination": "string", "description": "string", "entitlementArn": "string", "transport": { "streamId": "string", "minLatency": integer, "maxLatency": integer, "maxBitrate": integer, "sourceListenerPort": integer, "smoothingLatency": integer, "remoteId": "string", "sourceListenerAddress": "string", "senderIpAddress": "string", "protocol": enum, "senderControlPort": integer, "cidrAllowList": [ "string" ], "maxSyncBuffer": integer }, "vpcInterfaceAttachment": { "vpcInterfaceName": "string" }, "bridgeArn": "string", "outputArn": "string", "encryption": { "resourceId": "string", "roleArn": "string", "secretArn": "string", "constantInitializationVector": "string", "keyType": enum, "region": "string", "deviceId": "string", "url": "string", "algorithm": enum }, "port": integer, "bridgePorts": [ integer ], "name": "string", "dataTransferSubscriberFeePercent": integer, "mediaLiveInputArn": "string" }, "flowArn": "string" }
{ "outputArn": "string", "flowArn": "string" }
{ "message": "string" }

Properties

DestinationConfiguration

The definition of a media stream that is associated with the output.

PropertyTypeRequiredDescription
destinationIp

string

True

The IP address where contents of the media stream will be sent.

destinationPort

integer

Format: int32

True

The port to use when the content of the media stream is distributed to the output.

interface

Interface

True

The VPC interface that is used for the media stream associated with the output.

outboundIp

string

True

The IP address that the receiver requires in order to establish a connection with the flow. This value is represented by the elastic network interface IP address of the VPC. This field applies only to outputs that use the CDI or ST 2110 JPEG XS or protocol.

DestinationConfigurationRequest

The definition of a media stream that you want to associate with the output.

PropertyTypeRequiredDescription
destinationIp

string

True

The IP address where you want MediaConnect to send contents of the media stream.

destinationPort

integer

Format: int32

True

The port that you want MediaConnect to use when it distributes the media stream to the output.

interface

InterfaceRequest

True

The VPC interface that you want to use for the media stream associated with the output.

EncodingParameters

A collection of parameters that determine how MediaConnect will convert the content. These fields only apply to outputs on flows that have a CDI source.

PropertyTypeRequiredDescription
compressionFactor

number

Format: float

True

A value that is used to calculate compression for an output. The bitrate of the output is calculated as follows:

Output bitrate = (1 / compressionFactor) * (source bitrate)

This property only applies to outputs that use the ST 2110 JPEG XS protocol, with a flow source that uses the CDI protocol. Valid values are in the range of 3.0 to 10.0, inclusive.

encoderProfile

string

Values: main | high

True

A setting on the encoder that drives compression settings. This property only applies to video media streams associated with outputs that use the ST 2110 JPEG XS protocol, with a flow source that uses the CDI protocol.

EncodingParametersRequest

A collection of parameters that determine how MediaConnect will convert the content. These fields only apply to outputs on flows that have a CDI source.

PropertyTypeRequiredDescription
compressionFactor

number

Format: float

True

A value that is used to calculate compression for an output. The bitrate of the output is calculated as follows:

Output bitrate = (1 / compressionFactor) * (source bitrate)

This property only applies to outputs that use the ST 2110 JPEG XS protocol, with a flow source that uses the CDI protocol. Valid values are in the range of 3.0 to 10.0, inclusive.

encoderProfile

string

Values: main | high

True

A setting on the encoder that drives compression settings. This property only applies to video media streams associated with outputs that use the ST 2110 JPEG XS protocol, if at least one source on the flow uses the CDI protocol.

Encryption

Information about the encryption of the flow.

PropertyTypeRequiredDescription
algorithm

string

Values: aes128 | aes192 | aes256

False

The type of algorithm that is used for the encryption (such as aes128, aes192, or aes256).

constantInitializationVector

string

False

A 128-bit, 16-byte hex value represented by a 32-character string, to be used with the key for encrypting content. This parameter is not valid for static key encryption.

deviceId

string

False

The value of one of the devices that you configured with your digital rights management (DRM) platform key provider. This parameter is required for SPEKE encryption and is not valid for static key encryption.

keyType

string

Values: speke | static-key | srt-password

False

The type of key that is used for the encryption. If you don't specify a keyType value, the service uses the default setting (static-key).

region

string

False

The AWS Region that the API Gateway proxy endpoint was created in. This parameter is required for SPEKE encryption and is not valid for static key encryption.

resourceId

string

False

An identifier for the content. The service sends this value to the key server to identify the current endpoint. The resource ID is also known as the content ID. This parameter is required for SPEKE encryption and is not valid for static key encryption.

roleArn

string

True

The Amazon Resource Name (ARN) of the role that you created during setup (when you set up MediaConnect as a trusted entity).

secretArn

string

False

The ARN of the secret that you created in AWS Secrets Manager to store the encryption key.

url

string

False

The URL from the API Gateway proxy that you set up to talk to your key server. This parameter is required for SPEKE encryption and is not valid for static key encryption.

Interface

The VPC interface that you want to use for the media stream associated with the output.

PropertyTypeRequiredDescription
name

string

True

The name of the VPC interface that you want to use for the media stream associated with the output.

InterfaceRequest

The VPC interface that you want to designate where the media stream is coming from or going to.

PropertyTypeRequiredDescription
name

string

True

The name of the VPC interface.

MediaStreamOutputConfiguration

The media stream that is associated with the output, and the parameters for that association.

PropertyTypeRequiredDescription
destinationConfigurations

Array of type DestinationConfiguration

False

The media streams that you want to associate with the output.

encodingName

string

Values: jxsv | raw | smpte291 | pcm

True

The format that will be used to encode the data.

For ancillary data streams, set the encoding name to smpte291.

For audio streams, set the encoding name to pcm.

For video streams on sources or outputs that use the CDI protocol, set the encoding name to raw.

For video streams on sources or outputs that use the ST 2110 JPEG XS protocol, set the encoding name to jxsv.

encodingParameters

EncodingParameters

False

A collection of parameters that determine how MediaConnect will convert the content. These fields only apply to outputs on flows that have a CDI source.

mediaStreamName

string

True

A name that helps you distinguish one media stream from another.

MediaStreamOutputConfigurationRequest

The media stream that you want to associate with the output, and the parameters for that association.

PropertyTypeRequiredDescription
destinationConfigurations

Array of type DestinationConfigurationRequest

False

The media streams that you want to associate with the output.

encodingName

string

Values: jxsv | raw | smpte291 | pcm

True

The format that will be used to encode the data.

For ancillary data streams, set the encoding name to smpte291.

For audio streams, set the encoding name to pcm.

For video, 2110 streams, set the encoding name to raw.

For video, JPEG XS streams, set the encoding name to jxsv.

encodingParameters

EncodingParametersRequest

False

A collection of parameters that determine how MediaConnect will convert the content. These fields only apply to outputs on flows that have a CDI source.

mediaStreamName

string

True

The name of the media stream that is associated with the output.

Output

The settings for an output.

PropertyTypeRequiredDescription
bridgeArn

string

False

The ARN of the bridge that added this output.

bridgePorts

Array of type integer

False

The bridge output ports currently in use.

dataTransferSubscriberFeePercent

integer

False

The percentage of the entitlement data transfer fee that the subscriber is responsible for.

description

string

False

A description of the output. This description is not visible outside of the current AWS account even if the account grants entitlements to other accounts.

destination

string

False

The IP address where you want to send the output. This field applies only to outputs that use a push protocol, such as RIST or Zixi push.

encryption

Encryption

False

The encryption credentials that you want to use for the output.

entitlementArn

string

False

The ARN of the entitlement on the originator's flow. This value is relevant only on entitled flows.

listenerAddress

string

False

The IP address that the receiver requires in order to establish a connection with the flow. For public networking, the ListenerAddress is represented by the elastic IP address of the flow. For private networking, the ListenerAddress is represented by the elastic network interface IP address of the VPC. This field applies only to outputs that use a pull protocol, such as Zixi pull or SRT listener.

mediaLiveInputArn

string

False

The input ARN of the AWS Elemental MediaLive channel. This parameter is relevant only for outputs that were added by creating a MediaLive input.

mediaStreamOutputConfigurations

Array of type MediaStreamOutputConfiguration

False

The configuration for each media stream that is associated with the output.

name

string

True

The name of the output. This value must be unique within the current flow.

outputArn

string

True

The ARN of the output.

outputStatus

string

Values: ENABLED | DISABLED

False

An indication of whether the output is transmitting data or not.

port

integer

False

The port to use when content is distributed to the output.

transport

Transport

False

Attributes that are related to the transport stream.

vpcInterfaceAttachment

VpcInterfaceAttachment

False

The VPC interface that you want to send your output to.

RemoveFlowOutputResponse

The result of a successful RemoveFlowOutput request including the flow ARN and the output ARN that was removed.

PropertyTypeRequiredDescription
flowArn

string

True

The ARN of the flow that is associated with the output you removed.

outputArn

string

True

The ARN of the output that you removed.

ResponseError

An exception raised by MediaConnect when you submit a request that cannot be completed. For more information, see the error message and documentation for the operation.

PropertyTypeRequiredDescription
message

string

True

The specific error message that MediaConnect returns to help you understand the reason that the request did not succeed.

Transport

Attributes that are related to the transport stream.

PropertyTypeRequiredDescription
cidrAllowList

Array of type string

False

The range of IP addresses that are allowed to initiate output requests to this flow. Format the IP addresses as a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.

maxBitrate

integer

Format: int64

False

The maximum bitrate for RIST, RTP, and RTP-FEC streams.

maxLatency

integer

Format: int64

False

The maximum latency in milliseconds for a RIST source, a Zixi-based source, a Fujitsu-based source, or a Zixi-based output.

maxSyncBuffer

integer

Format: int32

False

The size of the buffer (in milliseconds) to use to sync incoming source data.

minLatency

integer

Format: int64

False

The minimum latency in milliseconds for SRT-based streams. In streams that use the SRT protocol, this value that you set on your MediaConnect source or output represents the minimal potential latency of that connection. The latency of the stream is set to the highest number between the sender’s minimum latency and the receiver’s minimum latency.

protocol

string

Values: zixi-push | rtp-fec | rtp | zixi-pull | rist | st2110-jpegxs | cdi | srt-listener | srt-caller | fujitsu-qos | udp

True

The protocol that is used by the source or output.

remoteId

string

False

The identifier that is assigned to the Zixi receiver. This parameter applies only to outputs that use Zixi pull.

senderControlPort

integer

Format: int32

False

The port that the flow uses to send outbound requests to initiate connection with the sender.

senderIpAddress

string

False

The IP address that the flow communicates with to initiate connection with the sender.

smoothingLatency

integer

Format: int64

False

The smoothing latency in milliseconds for RIST, RTP, and RTP-FEC streams.

sourceListenerAddress

string

False

Source IP or domain name for SRT-caller protocol.

sourceListenerPort

integer

False

Source port for SRT-caller protocol.

streamId

string

False

The stream ID that you want to use for this transport. This parameter applies only to Zixi and SRT caller-based streams.

UpdateEncryption

Information about the encryption of the flow.

PropertyTypeRequiredDescription
algorithm

string

Values: aes128 | aes192 | aes256

False

The type of algorithm that is used for the encryption (such as aes128, aes192, or aes256).

constantInitializationVector

string

False

A 128-bit, 16-byte hex value represented by a 32-character string, to be used with the key for encrypting content. This parameter is not valid for static key encryption.

deviceId

string

False

The value of one of the devices that you configured with your digital rights management (DRM) platform key provider. This parameter is required for SPEKE encryption and is not valid for static key encryption.

keyType

string

Values: speke | static-key | srt-password

False

The type of key that is used for the encryption. If you don't specify a keyType value, the service uses the default setting (static-key).

region

string

False

The AWS Region that the API Gateway proxy endpoint was created in. This parameter is required for SPEKE encryption and is not valid for static key encryption.

resourceId

string

False

An identifier for the content. The service sends this value to the key server to identify the current endpoint. The resource ID is also known as the content ID. This parameter is required for SPEKE encryption and is not valid for static key encryption.

roleArn

string

False

The ARN of the role that you created during setup (when you set up MediaConnect as a trusted entity).

secretArn

string

False

The ARN of the secret that you created in AWS Secrets Manager to store the encryption key.

url

string

False

The URL from the API Gateway proxy that you set up to talk to your key server. This parameter is required for SPEKE encryption and is not valid for static key encryption.

UpdateFlowOutputRequest

The updates that you want to make to an existing output of an existing flow.

PropertyTypeRequiredDescription
cidrAllowList

Array of type string

False

The range of IP addresses that are allowed to initiate output requests to this flow. Format the IP addresses as a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.

description

string

False

A description of the output. This description is not visible outside of the current AWS account even if the account grants entitlements to other accounts.

destination

string

False

The IP address where you want to send the output.

encryption

UpdateEncryption

False

The encryption credentials that you want to use for the output.

maxLatency

integer

Format: int64

False

The maximum latency in milliseconds. This parameter applies only to RIST-based, Zixi-based, and Fujitsu-based streams.

mediaStreamOutputConfigurations

Array of type MediaStreamOutputConfigurationRequest

False

The configuration for each media stream that is associated with the output.

minLatency

integer

Format: int64

False

The minimum latency in milliseconds for SRT-based streams. In streams that use the SRT protocol, this value that you set on your MediaConnect source or output represents the minimal potential latency of that connection. The latency of the stream is set to the highest number between the sender’s minimum latency and the receiver’s minimum latency.

outputStatus

string

Values: ENABLED | DISABLED

False

An indication of whether the output should transmit data or not. If you don't specify the outputStatus field in your request, MediaConnect leaves the value unchanged.

port

integer

False

The port to use when MediaConnect distributes content to the output.

protocol

string

Values: zixi-push | rtp-fec | rtp | zixi-pull | rist | st2110-jpegxs | cdi | srt-listener | srt-caller | fujitsu-qos | udp

False

The protocol to use for the output.

remoteId

string

False

The identifier that is assigned to the Zixi receiver. This parameter applies only to outputs that use Zixi pull.

senderControlPort

integer

Format: int32

False

The port that the flow uses to send outbound requests to initiate connection with the sender.

senderIpAddress

string

False

The IP address that the flow communicates with to initiate connection with the sender.

smoothingLatency

integer

Format: int64

False

The smoothing latency in milliseconds for RIST, RTP, and RTP-FEC streams.

streamId

string

False

The stream ID that you want to use for this transport. This parameter applies only to Zixi and SRT caller-based streams.

vpcInterfaceAttachment

VpcInterfaceAttachment

False

The VPC interface that you want to send your output to.

UpdateFlowOutputResponse

The result of a successful UpdateFlowOutput request including the flow ARN and the updated output.

PropertyTypeRequiredDescription
flowArn

string

True

The ARN of the flow that is associated with the updated output.

output

Output

True

The new settings of the output that you updated.

VpcInterfaceAttachment

The VPC interface that you want to send your output to.

PropertyTypeRequiredDescription
vpcInterfaceName

string

False

The name of the VPC interface that you want to send your output to.

See also

For more information about using this API in one of the language-specific AWS SDKs and references, see the following:

UpdateFlowOutput

RemoveFlowOutput